Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / ep8260 / flash.c
diff --git a/qemu/roms/u-boot/board/ep8260/flash.c b/qemu/roms/u-boot/board/ep8260/flash.c
new file mode 100644 (file)
index 0000000..44f63ee
--- /dev/null
@@ -0,0 +1,395 @@
+/*
+ * (C) Copyright 2001, 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Frank Panno <fpanno@delphintech.com>, Delphin Technology AG
+ *
+ * Flash Routines for AMD device AM29DL323DB on the EP8260 board.
+ *
+ * This file is based on board/tqm8260/flash.c.
+ *--------------------------------------------------------------------
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+#define V_ULONG(a)     (*(volatile unsigned long *)( a ))
+#define V_BYTE(a)      (*(volatile unsigned char *)( a ))
+
+
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+
+/*-----------------------------------------------------------------------
+ */
+void flash_reset(void)
+{
+       if( flash_info[0].flash_id != FLASH_UNKNOWN ) {
+               V_ULONG( flash_info[0].start[0] ) = 0x00F000F0;
+               V_ULONG( flash_info[0].start[0] + 4 ) = 0x00F000F0;
+       }
+}
+
+/*-----------------------------------------------------------------------
+ */
+ulong flash_get_size( ulong baseaddr, flash_info_t *info )
+{
+       short i;
+       unsigned long flashtest_h, flashtest_l;
+
+       /* Write auto select command sequence and test FLASH answer */
+       V_ULONG(baseaddr + ((ulong)0x0555 << 3)) = 0x00AA00AA;
+       V_ULONG(baseaddr + ((ulong)0x02AA << 3)) = 0x00550055;
+       V_ULONG(baseaddr + ((ulong)0x0555 << 3)) = 0x00900090;
+       V_ULONG(baseaddr + 4 + ((ulong)0x0555 << 3)) = 0x00AA00AA;
+       V_ULONG(baseaddr + 4 + ((ulong)0x02AA << 3)) = 0x00550055;
+       V_ULONG(baseaddr + 4 + ((ulong)0x0555 << 3)) = 0x00900090;
+
+       flashtest_h = V_ULONG(baseaddr);                /* manufacturer ID         */
+       flashtest_l = V_ULONG(baseaddr + 4);
+
+       if ((int)flashtest_h == AMD_MANUFACT) {
+               info->flash_id = FLASH_MAN_AMD;
+       } else {
+               info->flash_id = FLASH_UNKNOWN;
+               info->sector_count = 0;
+               info->size = 0;
+               return (0);                             /* no or unknown flash     */
+       }
+
+       flashtest_h = V_ULONG(baseaddr + 8);            /* device ID               */
+       flashtest_l = V_ULONG(baseaddr + 12);
+       if (flashtest_h != flashtest_l) {
+               info->flash_id = FLASH_UNKNOWN;
+               return(0);
+       }
+
+       switch((int)flashtest_h) {
+       case AMD_ID_DL323B:
+               info->flash_id += FLASH_AMDL323B;
+               info->sector_count = 71;
+               info->size = 0x01000000;         /* 4 * 4 MB = 16 MB    */
+               break;
+       case AMD_ID_LV640U:     /* AMDLV640 and AMDLV641 have same ID */
+               info->flash_id += FLASH_AMLV640U;
+               info->sector_count = 128;
+               info->size = 0x02000000;        /* 4 * 8 MB = 32 MB     */
+               break;
+       default:
+               info->flash_id = FLASH_UNKNOWN;
+               return(0);                              /* no or unknown flash     */
+       }
+
+       if(flashtest_h == AMD_ID_LV640U) {
+               /* set up sector start adress table (uniform sector type) */
+               for (i = 0; i < info->sector_count; i++)
+                       info->start[i] = baseaddr + (i * 0x00040000);
+       } else {
+               /* set up sector start adress table (bottom sector type) */
+               for (i = 0; i < 8; i++) {
+                       info->start[i] = baseaddr + (i * 0x00008000);
+               }
+               for (i = 8; i < info->sector_count; i++) {
+                       info->start[i] = baseaddr + (i * 0x00040000) - 0x001C0000;
+               }
+       }
+       /* check for protected sectors */
+       for (i = 0; i < info->sector_count; i++) {
+               /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+               if ((V_ULONG( info->start[i] + 16 ) & 0x00010001) ||
+                   (V_ULONG( info->start[i] + 20 ) & 0x00010001)) {
+                       info->protect[i] = 1;           /* D0 = 1 if protected */
+               } else {
+                       info->protect[i] = 0;
+               }
+       }
+
+       flash_reset();
+       return(info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+unsigned long flash_init (void)
+{
+       unsigned long size_b0 = 0;
+       int i;
+
+       /* Init: no FLASHes known */
+       for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
+               flash_info[i].flash_id = FLASH_UNKNOWN;
+       }
+
+       /* Static FLASH Bank configuration here (only one bank) */
+
+       size_b0 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
+       if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
+               printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+                       size_b0, size_b0>>20);
+       }
+
+       /*
+        * protect monitor and environment sectors
+        */
+
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
+       flash_protect(FLAG_PROTECT_SET,
+                     CONFIG_SYS_MONITOR_BASE,
+                     CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+                     &flash_info[0]);
+#endif
+
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE      CONFIG_ENV_SECT_SIZE
+# endif
+       flash_protect(FLAG_PROTECT_SET,
+                     CONFIG_ENV_ADDR,
+                     CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
+                     &flash_info[0]);
+#endif
+
+       return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+       int i;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               printf ("missing or unknown FLASH type\n");
+               return;
+       }
+
+       switch ((info->flash_id >> 16) & 0xff) {
+       case FLASH_MAN_AMD:         printf ("AMD ");                break;
+       default:                    printf ("Unknown Vendor ");     break;
+       }
+
+       switch (info->flash_id & FLASH_TYPEMASK) {
+       case FLASH_AMDL323B:    printf ("29DL323B (32 M, bottom sector)\n");
+                               break;
+       case FLASH_AMLV640U:    printf ("29LV640U (64 M, uniform sector)\n");
+                               break;
+       default:                printf ("Unknown Chip Type\n");
+                               break;
+       }
+
+       printf ("  Size: %ld MB in %d Sectors\n",
+               info->size >> 20, info->sector_count);
+
+       printf ("  Sector Start Addresses:");
+       for (i=0; i<info->sector_count; ++i) {
+               if ((i % 5) == 0)
+                       printf ("\n   ");
+               printf (" %08lX%s",
+                       info->start[i],
+                       info->protect[i] ? " (RO)" : "     "
+                       );
+       }
+       printf ("\n");
+       return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+       int flag, prot, sect, l_sect;
+       ulong start, now, last;
+
+       if ((s_first < 0) || (s_first > s_last)) {
+               if (info->flash_id == FLASH_UNKNOWN) {
+                       printf ("- missing\n");
+               } else {
+                       printf ("- no sectors to erase\n");
+               }
+               return 1;
+       }
+
+       prot = 0;
+       for (sect = s_first; sect <= s_last; sect++) {
+               if (info->protect[sect])
+                       prot++;
+       }
+
+       if (prot) {
+               printf ("- Warning: %d protected sectors will not be erased!\n",
+                       prot);
+       } else {
+               printf ("\n");
+       }
+
+       l_sect = -1;
+
+       /* Disable interrupts which might cause a timeout here */
+       flag = disable_interrupts();
+
+       V_ULONG( info->start[0] + (0x0555 << 3) ) = 0x00AA00AA;
+       V_ULONG( info->start[0] + (0x02AA << 3) ) = 0x00550055;
+       V_ULONG( info->start[0] + (0x0555 << 3) ) = 0x00800080;
+       V_ULONG( info->start[0] + (0x0555 << 3) ) = 0x00AA00AA;
+       V_ULONG( info->start[0] + (0x02AA << 3) ) = 0x00550055;
+       V_ULONG( info->start[0] + 4 + (0x0555 << 3) ) = 0x00AA00AA;
+       V_ULONG( info->start[0] + 4 + (0x02AA << 3) ) = 0x00550055;
+       V_ULONG( info->start[0] + 4 + (0x0555 << 3) ) = 0x00800080;
+       V_ULONG( info->start[0] + 4 + (0x0555 << 3) ) = 0x00AA00AA;
+       V_ULONG( info->start[0] + 4 + (0x02AA << 3) ) = 0x00550055;
+       udelay (1000);
+
+       /* Start erase on unprotected sectors */
+       for (sect = s_first; sect<=s_last; sect++) {
+               if (info->protect[sect] == 0) { /* not protected */
+                       V_ULONG( info->start[sect] ) = 0x00300030;
+                       V_ULONG( info->start[sect] + 4 ) = 0x00300030;
+                       l_sect = sect;
+               }
+       }
+
+       /* re-enable interrupts if necessary */
+       if (flag)
+               enable_interrupts();
+
+       /* wait at least 80us - let's wait 1 ms */
+       udelay (1000);
+
+       /*
+        * We wait for the last triggered sector
+        */
+       if (l_sect < 0)
+               goto DONE;
+
+       start = get_timer (0);
+       last  = start;
+       while ((V_ULONG( info->start[l_sect] ) & 0x00800080) != 0x00800080 ||
+              (V_ULONG( info->start[l_sect] + 4 ) & 0x00800080) != 0x00800080)
+       {
+               if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+                       printf ("Timeout\n");
+                       return 1;
+               }
+               /* show that we're waiting */
+               if ((now - last) > 1000) {      /* every second */
+                       serial_putc ('.');
+                       last = now;
+               }
+       }
+
+ DONE:
+       /* reset to read mode */
+       flash_reset ();
+
+       printf (" done\n");
+       return 0;
+}
+
+static int write_dword (flash_info_t *, ulong, unsigned char *);
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+       ulong dp;
+       static unsigned char bb[8];
+       int i, l, rc, cc = cnt;
+
+       dp = (addr & ~7);       /* get lower dword aligned address */
+
+       /*
+        * handle unaligned start bytes
+        */
+       if ((l = addr - dp) != 0) {
+               for (i = 0; i < 8; i++)
+                       bb[i] = (i < l || (i-l) >= cc) ? V_BYTE(dp+i) : *src++;
+               if ((rc = write_dword(info, dp, bb)) != 0)
+               {
+                       return (rc);
+               }
+               dp += 8;
+               cc -= 8 - l;
+       }
+
+       /*
+        * handle word aligned part
+        */
+       while (cc >= 8) {
+               if ((rc = write_dword(info, dp, src)) != 0) {
+                       return (rc);
+               }
+               dp  += 8;
+               src += 8;
+               cc -= 8;
+       }
+
+       if (cc <= 0) {
+               return (0);
+       }
+
+       /*
+        * handle unaligned tail bytes
+        */
+       for (i = 0; i < 8; i++) {
+               bb[i] = (i < cc) ? *src++ : V_BYTE(dp+i);
+       }
+       return (write_dword(info, dp, bb));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a dword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_dword (flash_info_t *info, ulong dest, unsigned char * pdata)
+{
+       ulong start;
+       ulong cl = 0, ch =0;
+       int flag, i;
+
+       for (ch=0, i=0; i < 4; i++)
+               ch = (ch << 8) + *pdata++;      /* high word    */
+       for (cl=0, i=0; i < 4; i++)
+               cl = (cl << 8) + *pdata++;      /* low word     */
+
+       /* Check if Flash is (sufficiently) erased */
+       if ((*((vu_long *)dest) & ch)   != ch
+           ||(*((vu_long *)(dest + 4)) & cl)   != cl)
+       {
+               return (2);
+       }
+
+       /* Disable interrupts which might cause a timeout here */
+       flag = disable_interrupts();
+
+       V_ULONG( info->start[0] + (0x0555 << 3) ) = 0x00AA00AA;
+       V_ULONG( info->start[0] + (0x02AA << 3) ) = 0x00550055;
+       V_ULONG( info->start[0] + (0x0555 << 3) ) = 0x00A000A0;
+       V_ULONG( dest ) = ch;
+       V_ULONG( info->start[0] + 4 + (0x0555 << 3) ) = 0x00AA00AA;
+       V_ULONG( info->start[0] + 4 + (0x02AA << 3) ) = 0x00550055;
+       V_ULONG( info->start[0] + 4 + (0x0555 << 3) ) = 0x00A000A0;
+       V_ULONG( dest + 4 ) = cl;
+
+       /* re-enable interrupts if necessary */
+       if (flag)
+               enable_interrupts();
+
+       /* data polling for D7 */
+       start = get_timer (0);
+       while (((V_ULONG( dest ) & 0x00800080) != (ch & 0x00800080)) ||
+              ((V_ULONG( dest + 4 ) & 0x00800080) != (cl & 0x00800080))) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+                       return (1);
+               }
+       }
+       return (0);
+}