Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / eltec / elppc / elppc.c

diff --git a/qemu/roms/u-boot/board/eltec/elppc/elppc.c b/qemu/roms/u-boot/board/eltec/elppc/elppc.c
new file mode 100644 (file)
index 0000000..ac814b8
--- /dev/null
+++ b/qemu/roms/u-boot/board/eltec/elppc/elppc.c
@@ -0,0 +1,164 @@
+/*
+ * (C) Copyright 2002 ELTEC Elektronik AG
+ * Frank Gottschling <fgottschling@eltec.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <mpc106.h>
+#include <video_fb.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+
+int checkboard (void)
+{
+       puts ("Board: ELTEC PowerPC\n");
+       return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+int checkflash (void)
+{
+       /* TODO */
+       printf ("Test not implemented !\n");
+       return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+static unsigned int mpc106_read_cfg_dword (unsigned int reg)
+{
+       unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC);
+
+       out32r (MPC106_REG_ADDR, reg_addr);
+
+       return (in32r (MPC106_REG_DATA | (reg & 0x3)));
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int dram_size (int board_type)
+{
+       /*
+        * No actual initialisation to do - done when setting up
+        * PICRs MCCRs ME/SARs etc in asm_init.S.
+        */
+
+       register unsigned long i, msar1, mear1, memSize;
+
+#if defined(CONFIG_SYS_MEMTEST)
+       register unsigned long reg;
+
+       printf ("Testing DRAM\n");
+
+       /* write each mem addr with it's address */
+       for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4)
+               *reg = reg;
+
+       for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) {
+               if (*reg != reg)
+                       return -1;
+       }
+#endif
+
+       /*
+        * Since MPC107 memory controller chip has already been set to
+        * control all memory, just read and interpret its memory boundery register.
+        */
+       memSize = 0;
+       msar1 = mpc106_read_cfg_dword (MPC106_MSAR1);
+       mear1 = mpc106_read_cfg_dword (MPC106_MEAR1);
+       i = mpc106_read_cfg_dword (MPC106_MBER) & 0xf;
+
+       do {
+               if (i & 0x01)                   /* is bank enabled ? */
+                       memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1;
+               msar1 >>= 8;
+               mear1 >>= 8;
+               i >>= 1;
+       } while (i);
+
+       return (memSize * 0x100000);
+}
+
+/* ------------------------------------------------------------------------- */
+
+phys_size_t initdram (int board_type)
+{
+       return dram_size (board_type);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * The BAB 911 can be reset by writing bit 0 of the Processor Initialization
+ * Register PI in the MPC 107 (at offset 0x41090 of the Embedded Utilities
+ * Memory Block).
+ */
+int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+{
+       out8 (MPC107_EUMB_PI, 1);
+       return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_WATCHDOG)
+
+/*
+ * Since the 7xx CPUs don't have an internal watchdog, this function is
+ * board specific.
+ */
+void watchdog_reset (void)
+{
+}
+#endif                                                 /* CONFIG_WATCHDOG */
+
+/* ------------------------------------------------------------------------- */
+
+void after_reloc (ulong dest_addr)
+{
+       /*
+        * Jump to the main U-Boot board init code
+        */
+       board_init_r ((gd_t *)gd, dest_addr);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_CONSOLE_EXTRA_INFO
+extern GraphicDevice smi;
+
+void video_get_info_str (int line_number, char *info)
+{
+       /* init video info strings for graphic console */
+       switch (line_number) {
+       case 1:
+               sprintf (info, " MPC7xx V%d.%d at %d / %d MHz",
+                                (get_pvr () >> 8) & 0xFF, get_pvr () & 0xFF, 400, 100);
+               return;
+       case 2:
+               sprintf (info, " ELTEC ELPPC with %ld MB DRAM and %ld MB FLASH",
+                                dram_size (0) / 0x100000, flash_init () / 0x100000);
+               return;
+       case 3:
+               sprintf (info, " %s", smi.modeIdent);
+               return;
+       }
+
+       /* no more info lines */
+       *info = 0;
+       return;
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+       return pci_eth_init(bis);
+}