Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / davinci / dm355evm / dm355evm.c

diff --git a/qemu/roms/u-boot/board/davinci/dm355evm/dm355evm.c b/qemu/roms/u-boot/board/davinci/dm355evm/dm355evm.c
new file mode 100644 (file)
index 0000000..10422b2
--- /dev/null
+++ b/qemu/roms/u-boot/board/davinci/dm355evm/dm355evm.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2009 David Brownell
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emif_defs.h>
+#include <asm/arch/nand_defs.h>
+#include <asm/arch/davinci_misc.h>
+#include <net.h>
+#include <netdev.h>
+#ifdef CONFIG_DAVINCI_MMC
+#include <mmc.h>
+#include <asm/arch/sdmmc_defs.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * With the DM355 EVM, u-boot is *always* a third stage loader,
+ * unless a JTAG debugger handles the first two stages:
+ *
+ *   - 1st stage is ROM Boot Loader (RBL), which searches for a
+ *     second stage loader in one of three places based on SW7:
+ *     NAND (with MMC/SD fallback), MMC/SD, or UART.
+ *
+ *   - 2nd stage is User Boot Loader (UBL), using at most 30KB
+ *     of on-chip SRAM, responsible for lowlevel init, and for
+ *     loading the third stage loader into DRAM.
+ *
+ *   - 3rd stage, that's us!
+ */
+
+int board_init(void)
+{
+       gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM355_EVM;
+       gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+       /* We expect the UBL to have handled "lowlevel init", which
+        * involves setting up at least:
+        *  - clocks
+        *      + PLL1 (for ARM and peripherals) and PLL2 (for DDR)
+        *      + clock divisors for those PLLs
+        *      + LPSC_DDR module enabled
+        *      + LPSC_TIMER0 module (still) enabled
+        *  - EMIF
+        *      + DDR init and timings
+        *      + AEMIF timings (for NAND and DM9000)
+        *  - pinmux
+        *
+        * Some of that is repeated here, mostly as a precaution.
+        */
+
+       /* AEMIF:  Some "address" lines are available as GPIOs.  A3..A13
+        * could be too if we used A12 as a GPIO during NAND chipselect
+        * (and Linux did too), letting us control the LED on A7/GPIO61.
+        */
+       REG(PINMUX2) = 0x0c08;
+
+       /* UART0 may still be in SyncReset if we didn't boot from UART */
+       davinci_enable_uart0();
+
+       /* EDMA may be in SyncReset too; turn it on, Linux won't (yet) */
+       lpsc_on(DAVINCI_LPSC_TPCC);
+       lpsc_on(DAVINCI_LPSC_TPTC0);
+       lpsc_on(DAVINCI_LPSC_TPTC1);
+
+       return 0;
+}
+
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+       return dm9000_initialize(bis);
+}
+#endif
+
+#ifdef CONFIG_NAND_DAVINCI
+
+static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip)
+{
+       struct nand_chip        *this = mtd->priv;
+       unsigned long           wbase = (unsigned long) this->IO_ADDR_W;
+       unsigned long           rbase = (unsigned long) this->IO_ADDR_R;
+
+       if (chip == 1) {
+               __set_bit(14, &wbase);
+               __set_bit(14, &rbase);
+       } else {
+               __clear_bit(14, &wbase);
+               __clear_bit(14, &rbase);
+       }
+       this->IO_ADDR_W = (void *)wbase;
+       this->IO_ADDR_R = (void *)rbase;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+       davinci_nand_init(nand);
+       nand->select_chip = nand_dm355evm_select_chip;
+       return 0;
+}
+
+#endif
+
+#ifdef CONFIG_DAVINCI_MMC
+static struct davinci_mmc mmc_sd0 = {
+       .reg_base       = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
+       .input_clk      = 108000000,
+       .host_caps      = MMC_MODE_4BIT,
+       .voltages       = MMC_VDD_32_33 | MMC_VDD_33_34,
+       .version        = MMC_CTLR_VERSION_1,
+};
+
+#ifdef CONFIG_DAVINCI_MMC_SD1
+static struct davinci_mmc mmc_sd1 = {
+       .reg_base       = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE,
+       .input_clk      = 108000000,
+       .host_caps      = MMC_MODE_4BIT,
+       .voltages       = MMC_VDD_32_33 | MMC_VDD_33_34,
+       .version        = MMC_CTLR_VERSION_1,
+};
+#endif
+
+int board_mmc_init(bd_t *bis)
+{
+       int err;
+
+       /* Add slot-0 to mmc subsystem */
+       err = davinci_mmc_init(bis, &mmc_sd0);
+       if (err)
+               return err;
+
+#ifdef CONFIG_DAVINCI_MMC_SD1
+       /* Add slot-1 to mmc subsystem */
+       err = davinci_mmc_init(bis, &mmc_sd1);
+#endif
+
+       return err;
+}
+#endif