Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / cmi / flash.c
diff --git a/qemu/roms/u-boot/board/cmi/flash.c b/qemu/roms/u-boot/board/cmi/flash.c
new file mode 100644 (file)
index 0000000..d9986f9
--- /dev/null
@@ -0,0 +1,501 @@
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * File:               flash.c
+ *
+ * Discription:                This Driver is for 28F320J3A, 28F640J3A and
+ *                     28F128J3A Intel flashs working in 16 Bit mode.
+ *                     They are single bank flashs.
+ *
+ *                     Most of this code is taken from existing u-boot
+ *                     source code.
+ */
+
+
+#include <common.h>
+#include <mpc5xx.h>
+
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR      (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+# endif
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE      CONFIG_ENV_SECT_SIZE
+# endif
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
+# endif
+#endif
+
+#define        FLASH_ID_MASK                   0xFFFF
+#define FLASH_BLOCK_SIZE               0x00010000
+#define FLASH_CMD_READ_ID              0x0090
+#define FLASH_CMD_RESET                        0x00ff
+#define FLASH_CMD_BLOCK_ERASE          0x0020
+#define FLASH_CMD_ERASE_CONFIRM                0x00D0
+#define FLASH_CMD_CLEAR_STATUS         0x0050
+#define FLASH_CMD_SUSPEND_ERASE                0x00B0
+#define FLASH_CMD_WRITE                        0x0040
+#define FLASH_CMD_PROTECT              0x0060
+#define FLASH_CMD_PROTECT_SET          0x0001
+#define FLASH_CMD_PROTECT_CLEAR                0x00D0
+#define FLASH_STATUS_DONE              0x0080
+
+flash_info_t   flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+/*
+ * Local function prototypes
+ */
+static ulong   flash_get_size          (vu_short *addr, flash_info_t *info);
+static int     write_short             (flash_info_t *info, ulong dest, ushort data);
+static void    flash_get_offsets       (ulong base, flash_info_t *info);
+
+/*
+ * Initialize flash
+ */
+
+unsigned long flash_init (void)
+{
+       unsigned long size_b0;
+       int i;
+
+       /* Init: no FLASHes known */
+       for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
+               flash_info[i].flash_id = FLASH_UNKNOWN;
+       }
+
+       /* Static FLASH Bank configuration here - FIXME XXX */
+#if 1
+       debug ("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
+#endif
+       size_b0 = flash_get_size((vu_short *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+       if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+               printf ("## Unknown FLASH on Bank 0: "
+                       "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
+                       flash_info[0].flash_id,
+                       size_b0, size_b0<<20);
+       }
+
+       flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
+
+       flash_info[0].size = size_b0;
+
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+       /* monitor protection ON by default */
+       flash_protect(FLAG_PROTECT_SET,
+                     CONFIG_SYS_MONITOR_BASE,
+                     CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+                     &flash_info[0]);
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+       /* ENV protection ON by default */
+       flash_protect(FLAG_PROTECT_SET,
+                     CONFIG_ENV_ADDR,
+                     CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
+                     &flash_info[0]);
+#endif
+
+       return size_b0;
+}
+
+/*
+ * Compute start adress of each sector (block)
+ */
+
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+       int i;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               return;
+       }
+
+       switch (info->flash_id & FLASH_VENDMASK) {
+       case FLASH_MAN_INTEL:
+           for (i = 0; i < info->sector_count; i++) {
+               info->start[i] = base + i * FLASH_BLOCK_SIZE;
+           }
+           return;
+
+       default:
+           printf ("Don't know sector offsets for flash type 0x%lx\n",
+               info->flash_id);
+           return;
+       }
+}
+
+/*
+ * Print flash information
+ */
+void flash_print_info  (flash_info_t *info)
+{
+       int i;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               printf ("missing or unknown FLASH type\n");
+               return;
+       }
+
+       switch (info->flash_id & FLASH_VENDMASK) {
+       case FLASH_MAN_AMD:     printf ("AMD ");                break;
+       case FLASH_MAN_FUJ:     printf ("Fujitsu ");            break;
+       case FLASH_MAN_SST:     printf ("SST ");                break;
+       case FLASH_MAN_STM:     printf ("STM ");                break;
+       case FLASH_MAN_INTEL:   printf ("Intel ");              break;
+       case FLASH_MAN_MT:      printf ("MT ");                 break;
+       default:                printf ("Unknown Vendor ");     break;
+       }
+
+       switch (info->flash_id & FLASH_TYPEMASK) {
+       case FLASH_28F320J3A:   printf ("28F320J3A (32Mbit) 16-Bit\n");
+                               break;
+       case FLASH_28F640J3A:   printf ("28F640J3A (64Mbit) 16-Bit\n");
+                               break;
+       case FLASH_28F128J3A:   printf ("28F128J3A (128Mbit) 16-Bit\n");
+                               break;
+       default:                printf ("Unknown Chip Type\n");
+                               break;
+       }
+
+       if (info->size >= (1 << 20)) {
+               i = 20;
+       } else {
+               i = 10;
+       }
+       printf ("  Size: %ld %cB in %d Sectors\n",
+               info->size >> i,
+               (i == 20) ? 'M' : 'k',
+               info->sector_count);
+
+       printf ("  Sector Start Addresses:");
+       for (i=0; i<info->sector_count; ++i) {
+               if ((i % 5) == 0)
+                       printf ("\n   ");
+               printf (" %08lX%s",
+                       info->start[i],
+                       info->protect[i] ? " (RO)" : "     "
+               );
+       }
+       printf ("\n");
+       return;
+}
+
+/*
+ * Get size of flash in bytes.
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_short *addr, flash_info_t *info)
+{
+       vu_short value;
+
+       /* Read Manufacturer ID */
+       addr[0] = FLASH_CMD_READ_ID;
+       value = addr[0];
+
+       switch (value) {
+       case (AMD_MANUFACT & FLASH_ID_MASK):
+               info->flash_id = FLASH_MAN_AMD;
+               break;
+       case (FUJ_MANUFACT & FLASH_ID_MASK):
+               info->flash_id = FLASH_MAN_FUJ;
+               break;
+       case (SST_MANUFACT & FLASH_ID_MASK):
+               info->flash_id = FLASH_MAN_SST;
+               break;
+       case (STM_MANUFACT & FLASH_ID_MASK):
+               info->flash_id = FLASH_MAN_STM;
+               break;
+       case (INTEL_MANUFACT & FLASH_ID_MASK):
+               info->flash_id = FLASH_MAN_INTEL;
+               break;
+       default:
+               info->flash_id = FLASH_UNKNOWN;
+               info->sector_count = 0;
+               info->size = 0;
+               addr[0] = FLASH_CMD_RESET;      /* restore read mode */
+               return (0);                     /* no or unknown flash  */
+       }
+
+       value = addr[1];                        /* device ID            */
+
+       switch (value) {
+       case (INTEL_ID_28F320J3A  & FLASH_ID_MASK):
+               info->flash_id += FLASH_28F320J3A;
+               info->sector_count = 32;
+               info->size = 0x00400000;
+               break;                          /* =>  32 MBit          */
+
+       case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
+               info->flash_id += FLASH_28F640J3A;
+               info->sector_count = 64;
+               info->size = 0x00800000;
+               break;                          /* => 64 MBit           */
+
+       case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
+               info->flash_id += FLASH_28F128J3A;
+               info->sector_count = 128;
+               info->size = 0x01000000;
+               break;                          /* => 128 MBit          */
+
+       default:
+               info->flash_id = FLASH_UNKNOWN;
+               addr[0] = FLASH_CMD_RESET;      /* restore read mode */
+               return (0);                     /* => no or unknown flash */
+
+       }
+
+       if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
+               printf ("** ERROR: sector count %d > max (%d) **\n",
+                       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+               info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+       }
+
+       addr[0] = FLASH_CMD_RESET;              /* restore read mode */
+
+       return (info->size);
+}
+
+
+/*
+ * Erase unprotected sectors
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+       int flag, prot, sect;
+       ulong start, now, last;
+
+       if ((s_first < 0) || (s_first > s_last)) {
+               if (info->flash_id == FLASH_UNKNOWN) {
+                       printf ("- missing\n");
+               } else {
+                       printf ("- no sectors to erase\n");
+               }
+               return 1;
+       }
+
+       if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
+               printf ("Can erase only Intel flash types - aborted\n");
+               return 1;
+       }
+
+       prot = 0;
+       for (sect=s_first; sect<=s_last; ++sect) {
+               if (info->protect[sect]) {
+                       prot++;
+               }
+       }
+
+       if (prot) {
+               printf ("- Warning: %d protected sectors will not be erased!\n",
+                       prot);
+       } else {
+               printf ("\n");
+       }
+
+       start = get_timer (0);
+       last  = start;
+
+       /* Start erase on unprotected sectors */
+       for (sect = s_first; sect<=s_last; sect++) {
+               if (info->protect[sect] == 0) { /* not protected */
+                       vu_short *addr = (vu_short *)(info->start[sect]);
+                       unsigned long status;
+
+                       /* Disable interrupts which might cause a timeout here */
+                       flag = disable_interrupts();
+
+#ifdef DEBUG
+                       printf("Erase sector %d at start addr 0x%08X", sect, (unsigned int)info->start[sect]);
+#endif
+
+                       *addr = FLASH_CMD_CLEAR_STATUS;
+                       *addr = FLASH_CMD_BLOCK_ERASE;
+                       *addr = FLASH_CMD_ERASE_CONFIRM;
+
+                       /* re-enable interrupts if necessary */
+                       if (flag)
+                               enable_interrupts();
+
+                       /* wait at least 80us - let's wait 1 ms */
+                       udelay (1000);
+
+                       while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) {
+                               if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+                                       printf("Flash erase timeout at address %lx\n", info->start[sect]);
+                                       *addr = FLASH_CMD_SUSPEND_ERASE;
+                                       *addr = FLASH_CMD_RESET;
+                                       return 1;
+                               }
+
+                               /* show that we're waiting */
+                               if ((now - last) > 1000) {      /* every second */
+                                       putc ('.');
+                                       last = now;
+                               }
+                       }
+                       *addr = FLASH_CMD_RESET;
+               }
+       }
+       printf (" done\n");
+       return 0;
+}
+
+/*
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+       ulong cp, wp;
+       ushort data;
+       int i, rc;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               return 4;
+       }
+
+       wp = (addr & ~1);       /* get lower word aligned address */
+
+       /*
+        * handle unaligned start byte
+        */
+
+       if (addr - wp) {
+               data = 0;
+               data = (data << 8) | *src++;
+               --cnt;
+               if ((rc = write_short(info, wp, data)) != 0) {
+                       return (rc);
+               }
+               wp += 2;
+       }
+
+       /*
+        * handle word aligned part
+        */
+
+       while (cnt >= 2) {
+               data = 0;
+               for (i=0; i<2; ++i) {
+                       data = (data << 8) | *src++;
+               }
+
+               if ((rc = write_short(info, wp, data)) != 0) {
+                       return (rc);
+               }
+               wp  += 2;
+               cnt -= 2;
+       }
+
+       if (cnt == 0) {
+               return (0);
+       }
+
+       /*
+        * handle unaligned tail bytes
+        */
+
+       data = 0;
+       for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
+               data = (data << 8) | *src++;
+               --cnt;
+       }
+       for (; i<2; ++i, ++cp) {
+               data = (data << 8) | (*(uchar *)cp);
+       }
+
+       return (write_short(info, wp, data));
+
+}
+
+/*
+ * Write 16 bit (short) to flash
+ */
+
+static int write_short (flash_info_t *info, ulong dest, ushort data)
+{
+       vu_short *addr = (vu_short*)(info->start[0]);
+       ulong start;
+       int flag;
+
+       /* Check if Flash is (sufficiently) erased */
+       if ((*((vu_short *)dest) & data) != data) {
+               return (2);
+       }
+
+       /* Disable interrupts which might cause a timeout here */
+       flag = disable_interrupts();
+
+       if (!(info->flash_id & FLASH_VENDMASK)) {
+               return 4;
+       }
+       *addr = FLASH_CMD_ERASE_CONFIRM;
+       *addr = FLASH_CMD_WRITE;
+
+       *((vu_short *)dest) = data;
+
+       /* re-enable interrupts if necessary */
+       if (flag) {
+               enable_interrupts();
+       }
+
+       /* data polling for D7 */
+       start = get_timer (0);
+
+       /* wait for error or finish */
+       while(!(addr[0] & FLASH_STATUS_DONE)){
+               if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+                       addr[0] = FLASH_CMD_RESET;
+                       return (1);
+               }
+       }
+
+       *addr = FLASH_CMD_RESET;
+       return (0);
+}
+
+/*
+ * Protects a flash sector
+ */
+
+int flash_real_protect(flash_info_t *info, long sector, int prot)
+{
+       vu_short *addr = (vu_short*)(info->start[sector]);
+       ulong start;
+
+       *addr = FLASH_CMD_CLEAR_STATUS;
+       *addr = FLASH_CMD_PROTECT;
+
+       if(prot) {
+               *addr = FLASH_CMD_PROTECT_SET;
+       } else {
+               *addr = FLASH_CMD_PROTECT_CLEAR;
+       }
+
+       /* wait for error or finish */
+       start = get_timer (0);
+       while(!(addr[0] & FLASH_STATUS_DONE)){
+               if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+                       printf("Flash protect timeout at address %lx\n",  info->start[sector]);
+                       addr[0] = FLASH_CMD_RESET;
+                       return (1);
+               }
+       }
+       /* Set software protect flag */
+       info->protect[sector] = prot;
+       *addr = FLASH_CMD_RESET;
+       return (0);
+}