Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / cm-bf537e / gpio_cfi_flash.c

diff --git a/qemu/roms/u-boot/board/cm-bf537e/gpio_cfi_flash.c b/qemu/roms/u-boot/board/cm-bf537e/gpio_cfi_flash.c
new file mode 100644 (file)
index 0000000..1075cc4
--- /dev/null
+++ b/qemu/roms/u-boot/board/cm-bf537e/gpio_cfi_flash.c
@@ -0,0 +1,81 @@
+/*
+ * gpio_cfi_flash.c - GPIO-assisted Flash Chip Support
+ *
+ * Copyright (c) 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include "gpio_cfi_flash.h"
+
+/* Allow this driver to be shared among boards */
+#ifndef GPIO_PIN_1
+#define GPIO_PIN_1  GPIO_PF4
+#endif
+#define GPIO_MASK_1 (1 << 21)
+#ifndef GPIO_PIN_2
+#define GPIO_MASK_2 (0)
+#else
+#define GPIO_MASK_2 (1 << 22)
+#endif
+#ifndef GPIO_PIN_3
+#define GPIO_MASK_3 (0)
+#else
+#define GPIO_MASK_3 (1 << 23)
+#endif
+#define GPIO_MASK   (GPIO_MASK_1 | GPIO_MASK_2 | GPIO_MASK_3)
+
+void *gpio_cfi_flash_swizzle(void *vaddr)
+{
+       unsigned long addr = (unsigned long)vaddr;
+
+       gpio_set_value(GPIO_PIN_1, addr & GPIO_MASK_1);
+
+#ifdef GPIO_PIN_2
+       gpio_set_value(GPIO_PIN_2, addr & GPIO_MASK_2);
+#endif
+
+#ifdef GPIO_PIN_3
+       gpio_set_value(GPIO_PIN_3, addr & GPIO_MASK_3);
+#endif
+
+       SSYNC();
+       udelay(1);
+
+       return (void *)(addr & ~GPIO_MASK);
+}
+
+#define __raw_writeq(value, addr) *(volatile u64 *)addr = value
+#define __raw_readq(addr) *(volatile u64 *)addr
+
+#define MAKE_FLASH(size, sfx) \
+void flash_write##size(u##size value, void *addr) \
+{ \
+       __raw_write##sfx(value, gpio_cfi_flash_swizzle(addr)); \
+} \
+u##size flash_read##size(void *addr) \
+{ \
+       return __raw_read##sfx(gpio_cfi_flash_swizzle(addr)); \
+}
+MAKE_FLASH(8, b)  /* flash_write8()  flash_read8() */
+MAKE_FLASH(16, w) /* flash_write16() flash_read16() */
+MAKE_FLASH(32, l) /* flash_write32() flash_read32() */
+MAKE_FLASH(64, q) /* flash_write64() flash_read64() */
+
+void gpio_cfi_flash_init(void)
+{
+       gpio_request(GPIO_PIN_1, "gpio_cfi_flash");
+       gpio_direction_output(GPIO_PIN_1, 0);
+#ifdef GPIO_PIN_2
+       gpio_request(GPIO_PIN_2, "gpio_cfi_flash");
+       gpio_direction_output(GPIO_PIN_2, 0);
+#endif
+#ifdef GPIO_PIN_3
+       gpio_request(GPIO_PIN_3, "gpio_cfi_flash");
+       gpio_direction_output(GPIO_PIN_3, 0);
+#endif
+}