Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / boundary / nitrogen6x / 6x_upgrade.txt

diff --git a/qemu/roms/u-boot/board/boundary/nitrogen6x/6x_upgrade.txt b/qemu/roms/u-boot/board/boundary/nitrogen6x/6x_upgrade.txt
new file mode 100644 (file)
index 0000000..1a62bbf
--- /dev/null
+++ b/qemu/roms/u-boot/board/boundary/nitrogen6x/6x_upgrade.txt
@@ -0,0 +1,45 @@
+setenv stdout serial,vga
+echo "check U-Boot" ;
+setenv offset 0x400
+if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then
+      echo "read $filesize bytes from SD card" ;
+      if sf probe || sf probe || \
+        sf probe 1 27000000 || sf probe 1 27000000 ; then
+          echo "probed SPI ROM" ;
+          if sf read 0x12400000 $offset $filesize ; then
+              if cmp.b 0x12000000 0x12400000 $filesize ; then
+                  echo "------- U-Boot versions match" ;
+              else
+                  echo "Need U-Boot upgrade" ;
+                  echo "Program in 5 seconds" ;
+                  for n in 5 4 3 2 1 ; do
+                       echo $n ;
+                       sleep 1 ;
+                  done
+                  echo "erasing" ;
+                  sf erase 0 0xC0000 ;
+                  # two steps to prevent bricking
+                  echo "programming" ;
+                  sf write 0x12000000 $offset $filesize ;
+                  echo "verifying" ;
+                  if sf read 0x12400000 $offset $filesize ; then
+                      if cmp.b 0x12000000 0x12400000 $filesize ; then
+                          while echo "---- U-Boot upgraded. reset" ; do
+                               sleep 120
+                          done
+                      else
+                          echo "Read verification error" ;
+                      fi
+                  else
+                       echo "Error re-reading EEPROM" ;
+                  fi
+              fi
+          else
+              echo "Error reading boot loader from EEPROM" ;
+          fi
+      else
+          echo "Error initializing EEPROM" ;
+      fi ;
+else
+     echo "No U-Boot image found on SD card" ;
+fi