Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / bf609-ezkit / bf609-ezkit.c

diff --git a/qemu/roms/u-boot/board/bf609-ezkit/bf609-ezkit.c b/qemu/roms/u-boot/board/bf609-ezkit/bf609-ezkit.c
new file mode 100644 (file)
index 0000000..43a4330
--- /dev/null
+++ b/qemu/roms/u-boot/board/bf609-ezkit/bf609-ezkit.c
@@ -0,0 +1,68 @@
+/*
+ * U-boot - main board file
+ *
+ * Copyright (c) 2008-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/blackfin.h>
+#include <asm/io.h>
+#include <asm/sdh.h>
+#include <asm/portmux.h>
+#include "soft_switch.h"
+
+int checkboard(void)
+{
+       printf("Board: ADI BF609 EZ-Kit board\n");
+       printf("       Support: http://blackfin.uclinux.org/\n");
+       return 0;
+}
+
+int board_early_init_f(void)
+{
+       static const unsigned short pins[] = {
+               P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
+               P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
+               P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
+       };
+       peripheral_request_list(pins, "smc0");
+
+       return 0;
+}
+
+#ifdef CONFIG_DESIGNWARE_ETH
+int board_eth_init(bd_t *bis)
+{
+       int ret = 0;
+
+       if (CONFIG_DW_PORTS & 1) {
+               static const unsigned short pins[] = P_RMII0;
+               if (!peripheral_request_list(pins, "emac0"))
+                       ret += designware_initialize(EMAC0_MACCFG, 0);
+       }
+       if (CONFIG_DW_PORTS & 2) {
+               static const unsigned short pins[] = P_RMII1;
+               if (!peripheral_request_list(pins, "emac1"))
+                       ret += designware_initialize(EMAC1_MACCFG, 0);
+       }
+
+       return ret;
+}
+#endif
+
+#ifdef CONFIG_BFIN_SDH
+int board_mmc_init(bd_t *bis)
+{
+       return bfin_mmc_init(bis);
+}
+#endif
+
+/* miscellaneous platform dependent initialisations */
+int misc_init_r(void)
+{
+       printf("other init\n");
+       return setup_board_switches();
+}