Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / bf533-ezkit / psd4256.h

diff --git a/qemu/roms/u-boot/board/bf533-ezkit/psd4256.h b/qemu/roms/u-boot/board/bf533-ezkit/psd4256.h
new file mode 100644 (file)
index 0000000..56c6442
--- /dev/null
+++ b/qemu/roms/u-boot/board/bf533-ezkit/psd4256.h
@@ -0,0 +1,51 @@
+/*
+ * U-boot - psd4256.h
+ *
+ * Copyright (c) 2005-2007 Analog Devices Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * Flash A/B Port A configuration registers.
+ * Addresses are offset values to CONFIG_SYS_FLASH1_BASE
+ * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B.
+ */
+
+#define        PSD_PORTA_DIN   0x070000
+#define        PSD_PORTA_DOUT  0x070004
+#define        PSD_PORTA_DIR   0x070006
+
+/*
+ * Flash A/B Port B configuration registers
+ * Addresses are offset values to CONFIG_SYS_FLASH1_BASE
+ * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B.
+ */
+
+#define        PSD_PORTB_DIN   0x070001
+#define        PSD_PORTB_DOUT  0x070005
+#define        PSD_PORTB_DIR   0x070007
+
+/*
+ * Flash A Port A Bit definitions
+ */
+
+#define        PSDA_PPICLK1    0x20    /* PPI Clock select bit 1               */
+#define        PSDA_PPICLK0    0x10    /* PPI Clock select bit 0               */
+#define        PSDA_VDEC_RST   0x08    /* Video decoder reset, 0 = RESET       */
+#define        PSDA_VENC_RST   0x04    /* Video encoder reset, 0 = RESET       */
+#define        PSDA_CODEC_RST  0x01    /* Codec reset, 0 = RESET               */
+
+/*
+ * Flash A Port B Bit definitions
+ */
+
+#define        PSDA_LED9       0x20    /* LED 9, 1 = LED ON                    */
+#define        PSDA_LED8       0x10    /* LED 8, 1 = LED ON                    */
+#define        PSDA_LED7       0x08    /* LED 7, 1 = LED ON                    */
+#define        PSDA_LED6       0x04    /* LED 6, 1 = LED ON                    */
+#define        PSDA_LED5       0x02    /* LED 5, 1 = LED ON                    */
+#define        PSDA_LED4       0x01    /* LED 4, 1 = LED ON                    */