Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / bf533-ezkit / flash-defines.h

diff --git a/qemu/roms/u-boot/board/bf533-ezkit/flash-defines.h b/qemu/roms/u-boot/board/bf533-ezkit/flash-defines.h
new file mode 100644 (file)
index 0000000..fa32203
--- /dev/null
+++ b/qemu/roms/u-boot/board/bf533-ezkit/flash-defines.h
@@ -0,0 +1,106 @@
+/*
+ * U-boot - flash-defines.h
+ *
+ * Copyright (c) 2005-2007 Analog Devices Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __FLASHDEFINES_H__
+#define __FLASHDEFINES_H__
+
+#include <common.h>
+
+#define V_ULONG(a)             (*(volatile unsigned long *)( a ))
+#define V_BYTE(a)              (*(volatile unsigned char *)( a ))
+#define BUFFER_SIZE            0x80000
+#define NO_COMMAND             0
+#define GET_CODES              1
+#define RESET                  2
+#define WRITE                  3
+#define FILL                   4
+#define ERASE_ALL              5
+#define ERASE_SECT             6
+#define READ                   7
+#define GET_SECTNUM            8
+#define FLASH_START_L          0x0000
+#define FLASH_START_H          0x2000
+#define FLASH_TOT_SECT         40
+#define FLASH_SIZE             0x220000
+#define FLASH_MAN_ST           2
+#define CONFIG_SYS_FLASH0_BASE         0x20000000
+#define CONFIG_SYS_FLASH1_BASE         0x20200000
+#define RESET_VAL              0xF0
+
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+int get_codes(void);
+int poll_toggle_bit(long lOffset);
+void reset_flash(void);
+int erase_flash(void);
+int erase_block_flash(int, unsigned long);
+void unlock_flash(long lOffset);
+int write_data(long lStart, long lCount, uchar *pnData);
+int FillData(long lStart, long lCount, long lStride, int *pnData);
+int read_data(long lStart, long lCount, long lStride, int *pnData);
+int read_flash(long nOffset, int *pnValue);
+int write_flash(long nOffset, int nValue);
+void get_sector_number(long lOffset, int *pnSector);
+int GetSectorProtectionStatus(flash_info_t * info, int nSector);
+int GetOffset(int nBlock);
+
+#define WRITESEQ1              0x0AAA
+#define WRITESEQ2              0x0554
+#define WRITESEQ3              0x0AAA
+#define WRITESEQ4              0x0AAA
+#define WRITESEQ5              0x0554
+#define WRITESEQ6              0x0AAA
+#define WRITEDATA1             0xaa
+#define WRITEDATA2             0x55
+#define WRITEDATA3             0x80
+#define WRITEDATA4             0xaa
+#define WRITEDATA5             0x55
+#define WRITEDATA6             0x10
+#define PriFlashABegin         0
+#define SecFlashABegin         32
+#define SecFlashBBegin         36
+#define PriFlashAOff           0x0
+#define PriFlashBOff           0x100000
+#define SecFlashAOff           0x200000
+#define SecFlashBOff           0x280000
+#define INVALIDLOCNSTART       0x20270000
+#define INVALIDLOCNEND         0x20280000
+#define BlockEraseVal          0x30
+#define UNLOCKDATA1            0xaa
+#define UNLOCKDATA2            0x55
+#define UNLOCKDATA3            0xa0
+#define GETCODEDATA1           0xaa
+#define GETCODEDATA2           0x55
+#define GETCODEDATA3           0x90
+#define SecFlashASec1Off       0x200000
+#define SecFlashASec2Off       0x204000
+#define SecFlashASec3Off       0x206000
+#define SecFlashASec4Off       0x208000
+#define SecFlashAEndOff                0x210000
+#define SecFlashBSec1Off       0x280000
+#define SecFlashBSec2Off       0x284000
+#define SecFlashBSec3Off       0x286000
+#define SecFlashBSec4Off       0x288000
+#define SecFlashBEndOff                0x290000
+
+#define SECT32                 32
+#define SECT33                 33
+#define SECT34                 34
+#define SECT35                 35
+#define SECT36                 36
+#define SECT37                 37
+#define SECT38                 38
+#define SECT39                 39
+
+#define FLASH_SUCCESS  0
+#define FLASH_FAIL     -1
+
+#endif