Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / a3000 / flash.c
diff --git a/qemu/roms/u-boot/board/a3000/flash.c b/qemu/roms/u-boot/board/a3000/flash.c
new file mode 100644 (file)
index 0000000..f2dd3c2
--- /dev/null
@@ -0,0 +1,438 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+
+#include <common.h>
+#include <mpc824x.h>
+
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR  (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+# endif
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE  CONFIG_ENV_SECT_SIZE
+# endif
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
+# endif
+#endif
+
+
+/*---------------------------------------------------------------------*/
+#define DEBUG_FLASH
+
+#ifdef DEBUG_FLASH
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+flash_info_t   flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_char *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, uchar *dest, uchar data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+#define BS(b)     (b)
+#define BYTEME(x) ((x) & 0xFF)
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+       unsigned long flash_banks[CONFIG_SYS_MAX_FLASH_BANKS] = CONFIG_SYS_FLASH_BANKS;
+       unsigned long size, size_b[CONFIG_SYS_MAX_FLASH_BANKS];
+
+       int i;
+
+       /* Init: no FLASHes known */
+       for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
+       {
+               flash_info[i].flash_id = FLASH_UNKNOWN;
+
+               DEBUGF("Get flash bank %d @ 0x%08lx\n", i, flash_banks[i]);
+/*
+               size_b[i] = flash_get_size((vu_char *)flash_banks[i], &flash_info[i]);
+*/
+               size_b[i] = flash_get_size((vu_char *) 0xff800000 , &flash_info[i]);
+
+               if (flash_info[i].flash_id == FLASH_UNKNOWN)
+               {
+                       printf ("## Unknown FLASH on Bank %d: "
+                               "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
+                               i, flash_info[i].flash_id,
+                               size_b[i], size_b[i]<<20);
+               }
+               else
+               {
+                       DEBUGF("## Flash bank %d at 0x%08lx sizes: 0x%08lx \n",
+                               i, flash_banks[i], size_b[i]);
+
+                       flash_get_offsets (flash_banks[i], &flash_info[i]);
+                       flash_info[i].size = size_b[i];
+               }
+       }
+
+
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+       DEBUGF("protect monitor %x @ %x\n", CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN);
+       /* monitor protection ON by default */
+       flash_protect(FLAG_PROTECT_SET,
+                     CONFIG_SYS_MONITOR_BASE,
+                     CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
+                     &flash_info[0]);
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+       /* ENV protection ON by default */
+       DEBUGF("protect environtment %x @ %x\n", CONFIG_ENV_ADDR, CONFIG_ENV_SECT_SIZE);
+       flash_protect(FLAG_PROTECT_SET,
+                     CONFIG_ENV_ADDR,
+                     CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
+                     &flash_info[0]);
+#endif
+
+       size = 0;
+       DEBUGF("## Final Flash bank sizes: ");
+       for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
+       {
+               DEBUGF("%08lx ", size_b[i]);
+               size += size_b[i];
+       }
+       DEBUGF("\n");
+       return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+       int i;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               return;
+       }
+
+       switch (info->flash_id & FLASH_VENDMASK) {
+               case FLASH_MAN_INTEL:
+                   for (i = 0; i < info->sector_count; i++) {
+                               info->start[i] = base;
+                               base += 0x00020000;             /* 128k per bank */
+                   }
+                   return;
+
+               default:
+                   printf ("Don't know sector ofsets for flash type 0x%lx\n", info->flash_id);
+                   return;
+       }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+       int i;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               printf ("missing or unknown FLASH type\n");
+               return;
+       }
+
+       switch (info->flash_id & FLASH_VENDMASK) {
+       case FLASH_MAN_AMD:     printf ("AMD ");                break;
+       case FLASH_MAN_FUJ:     printf ("Fujitsu ");            break;
+       case FLASH_MAN_SST:     printf ("SST ");                break;
+       case FLASH_MAN_STM:     printf ("STM ");                break;
+       case FLASH_MAN_INTEL:   printf ("Intel ");              break;
+       case FLASH_MAN_MT:      printf ("MT ");                 break;
+       default:                printf ("Unknown Vendor ");     break;
+       }
+
+       switch (info->flash_id & FLASH_TYPEMASK) {
+       case FLASH_28F320J3A:
+                       printf ("28F320J3A (32Mbit = 128K x 32)\n");
+                       break;
+       case FLASH_28F640J3A:
+                       printf ("28F640J3A (64Mbit = 128K x 64)\n");
+                       break;
+       case FLASH_28F128J3A:
+                       printf ("28F128J3A (128Mbit = 128K x 128)\n");
+                       break;
+       default:
+                       printf ("Unknown Chip Type\n");
+                       break;
+       }
+
+#if 1
+       if (info->size >= (1 << 20)) {
+               i = 20;
+       } else {
+               i = 10;
+       }
+       printf ("  Size: %ld %cB in %d Sectors\n",
+               info->size >> i,
+               (i == 20) ? 'M' : 'k',
+               info->sector_count);
+
+       printf ("  Sector Start Addresses:");
+       for (i=0; i<info->sector_count; ++i) {
+               if ((i % 5) == 0)
+                       printf ("\n   ");
+               printf (" %08lX%s",
+                       info->start[i],
+                       info->protect[i] ? " (RO)" : "     "
+               );
+       }
+       printf ("\n");
+#endif
+       return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_char *addr, flash_info_t *info)
+{
+       vu_char manuf, device;
+
+       addr[0] = BS(0x90);
+       manuf = BS(addr[0]);
+       DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, manuf);
+
+       switch (manuf) {
+       case BYTEME(AMD_MANUFACT):
+               info->flash_id = FLASH_MAN_AMD;
+               break;
+       case BYTEME(FUJ_MANUFACT):
+               info->flash_id = FLASH_MAN_FUJ;
+               break;
+       case BYTEME(SST_MANUFACT):
+               info->flash_id = FLASH_MAN_SST;
+               break;
+       case BYTEME(STM_MANUFACT):
+               info->flash_id = FLASH_MAN_STM;
+               break;
+       case BYTEME(INTEL_MANUFACT):
+               info->flash_id = FLASH_MAN_INTEL;
+               break;
+       default:
+               info->flash_id = FLASH_UNKNOWN;
+               info->sector_count = 0;
+               info->size = 0;
+               addr[0] = BS(0xFF);             /* restore read mode, (yes, BS is a NOP) */
+               return 0;                       /* no or unknown flash  */
+       }
+
+       device = BS(addr[2]);                   /* device ID            */
+
+       DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", (ulong)(&addr[1]), device);
+
+       switch (device) {
+       case BYTEME(INTEL_ID_28F320J3A):
+               info->flash_id += FLASH_28F320J3A;
+               info->sector_count = 32;
+               info->size = 0x00400000;
+               break;                          /* =>  4 MB             */
+
+       case BYTEME(INTEL_ID_28F640J3A):
+               info->flash_id += FLASH_28F640J3A;
+               info->sector_count = 64;
+               info->size = 0x00800000;
+               break;                          /* => 8 MB              */
+
+       case BYTEME(INTEL_ID_28F128J3A):
+               info->flash_id += FLASH_28F128J3A;
+               info->sector_count = 128;
+               info->size = 0x01000000;
+               break;                          /* => 16 MB             */
+
+       default:
+               info->flash_id = FLASH_UNKNOWN;
+               addr[0] = BS(0xFF);             /* restore read mode (yes, a NOP) */
+               return 0;                       /* => no or unknown flash */
+
+       }
+
+       if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
+               printf ("** ERROR: sector count %d > max (%d) **\n",
+                       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+               info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+       }
+
+       addr[0] = BS(0xFF);             /* restore read mode */
+
+       return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int    flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+       int flag, prot, sect;
+       ulong start, now, last;
+
+       if ((s_first < 0) || (s_first > s_last)) {
+               if (info->flash_id == FLASH_UNKNOWN) {
+                       printf ("- missing\n");
+               } else {
+                       printf ("- no sectors to erase\n");
+               }
+               return 1;
+       }
+
+       if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
+               printf ("Can erase only Intel flash types - aborted\n");
+               return 1;
+       }
+
+       prot = 0;
+       for (sect=s_first; sect<=s_last; ++sect) {
+               if (info->protect[sect]) {
+                       prot++;
+               }
+       }
+
+       if (prot) {
+               printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+       } else {
+               printf ("\n");
+       }
+
+       start = get_timer (0);
+       last  = start;
+       /* Start erase on unprotected sectors */
+       for (sect = s_first; sect<=s_last; sect++) {
+               if (info->protect[sect] == 0) { /* not protected */
+                       vu_char *addr = (vu_char *)(info->start[sect]);
+                       unsigned long status;
+
+                       /* Disable interrupts which might cause a timeout here */
+                       flag = disable_interrupts();
+
+                       *addr = BS(0x50);       /* clear status register */
+                       *addr = BS(0x20);       /* erase setup */
+                       *addr = BS(0xD0);       /* erase confirm */
+
+                       /* re-enable interrupts if necessary */
+                       if (flag) {
+                               enable_interrupts();
+                       }
+
+                       /* wait at least 80us - let's wait 1 ms */
+                       udelay (1000);
+
+                       while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
+                               if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+                                       printf ("Timeout\n");
+                                       *addr = BS(0xB0); /* suspend erase        */
+                                       *addr = BS(0xFF); /* reset to read mode */
+                                       return 1;
+                               }
+
+                               /* show that we're waiting */
+                               if ((now - last) > 1000) {      /* every second */
+                                       putc ('.');
+                                       last = now;
+                               }
+                       }
+
+                       *addr = BS(0xFF);       /* reset to read mode */
+               }
+       }
+       printf (" done\n");
+       return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+#define        FLASH_WIDTH     1       /* flash bus width in bytes */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+       uchar *wp = (uchar *)addr;
+       int rc;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               return 4;
+       }
+
+       while (cnt > 0) {
+               if ((rc = write_data(info, wp, *src)) != 0) {
+                       return rc;
+               }
+               wp++;
+               src++;
+               cnt--;
+       }
+
+       return cnt;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, uchar *dest, uchar data)
+{
+       vu_char *addr = (vu_char *)dest;
+       ulong status;
+       ulong start;
+       int flag;
+
+       /* Check if Flash is (sufficiently) erased */
+       if ((BS(*addr) & data) != data) {
+               return 2;
+       }
+       /* Disable interrupts which might cause a timeout here */
+       flag = disable_interrupts();
+
+       *addr = BS(0x40);               /* write setup */
+       *addr = data;
+
+       /* re-enable interrupts if necessary */
+       if (flag) {
+               enable_interrupts();
+       }
+
+       start = get_timer (0);
+
+       while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+                       *addr = BS(0xFF);       /* restore read mode */
+                       return 1;
+               }
+       }
+
+       *addr = BS(0xFF);       /* restore read mode */
+
+       return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */