Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / RPXlite_dw / flash.c
diff --git a/qemu/roms/u-boot/board/RPXlite_dw/flash.c b/qemu/roms/u-boot/board/RPXlite_dw/flash.c
new file mode 100644 (file)
index 0000000..c8de5ef
--- /dev/null
@@ -0,0 +1,474 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
+ * U-Boot port on RPXlite board
+ *
+ * Some of flash control words are modified. (from 2x16bit device
+ * to 4x8bit device)
+ * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices
+ * are not tested.
+ *
+ * (?) Does an RPXLite board which
+ *     does not use AM29LV800 flash memory exist ?
+ *     I don't know...
+ */
+
+/* Yes,Yoo.They do use other FLASH for the board.
+ *
+ * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
+ * U-Boot port on RPXlite DW version board
+ *
+ * By now,it uses 4 AM29DL323DB90VI devices(4x8bit).
+ * The total FLASH has 16MB(4x4MB).
+ * I just made some necessary changes on the basis of Wolfgang and Yoo's job.
+ *
+ * June 8, 2004 */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t   flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions   vu_long : volatile unsigned long IN include/common.h
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+unsigned long flash_init (void)
+{
+       unsigned long size_b0 ;
+       int i;
+
+       /* Init: no FLASHes known */
+       for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
+               flash_info[i].flash_id = FLASH_UNKNOWN;
+       }
+
+       size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+       flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+       /* If Monitor is in the cope of FLASH,then
+        * protect this area by default in case for
+        * other occupation. [SAM] */
+
+       /* monitor protection ON by default */
+       flash_protect(FLAG_PROTECT_SET,
+                     CONFIG_SYS_MONITOR_BASE,
+                     CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
+                     &flash_info[0]);
+#endif
+       flash_info[0].size = size_b0;
+       return (size_b0);
+}
+
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+       int i;
+
+       /* set up sector start address table */
+       if (info->flash_id & FLASH_BTYPE) {
+               info->start[0] = base + 0x00000000;
+               info->start[1] = base + 0x00008000;
+               info->start[2] = base + 0x00010000;
+               info->start[3] = base + 0x00018000;
+               info->start[4] = base + 0x00020000;
+               info->start[5] = base + 0x00028000;
+               info->start[6] = base + 0x00030000;
+               info->start[7] = base + 0x00038000;
+
+               for (i = 8; i < info->sector_count; i++) {
+                       info->start[i] = base + ((i-7) * 0x00040000);
+               }
+       } else {
+               i = info->sector_count - 1;
+               info->start[i--] = base + info->size - 0x00010000;
+               info->start[i--] = base + info->size - 0x00018000;
+               info->start[i--] = base + info->size - 0x00020000;
+               for (; i >= 0; i--) {
+                       info->start[i] = base + i * 0x00040000;
+               }
+       }
+
+}
+
+void flash_print_info  (flash_info_t *info)
+{
+       int i;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               printf ("missing or unknown FLASH type\n");
+               return;
+       }
+
+       switch (info->flash_id & FLASH_VENDMASK) {
+       case FLASH_MAN_AMD:     printf ("AMD ");                break;
+       case FLASH_MAN_FUJ:     printf ("FUJITSU ");            break;
+       default:                printf ("Unknown Vendor ");     break;
+       }
+
+       switch (info->flash_id & FLASH_TYPEMASK) {
+       case FLASH_AM400B:      printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+                               break;
+       case FLASH_AM400T:      printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+                               break;
+       case FLASH_AM800B:      printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+                               break;
+       case FLASH_AM800T:      printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+                               break;
+       case FLASH_AM160B:      printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+                               break;
+       case FLASH_AM160T:      printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+                               break;
+       case FLASH_AM320B:      printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+                               break;
+       case FLASH_AM320T:      printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+                               break;
+       case FLASH_AMDL323B:    printf ("AM29DL323B (32 Mbit, bottom boot sector)\n");
+                               break;
+       /* I just add the FLASH_AMDL323B for RPXlite_DW BOARD. [SAM]  */
+       default:                printf ("Unknown Chip Type\n");
+                               break;
+       }
+       printf ("  Size: %ld MB in %d Sectors\n",info->size >> 20, info->sector_count);
+       printf ("  Sector Start Addresses:");
+       for (i=0; i<info->sector_count; ++i) {
+               if ((i % 5) == 0)
+                       printf ("\n   ");
+               printf (" %08lX%s",info->start[i],info->protect[i] ? " (RO)" : "     ");
+       }
+       printf ("\n");
+       return;
+}
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+       short i;
+       ulong value;
+       ulong base = (ulong)addr;
+
+       /* Write auto select command: read Manufacturer ID */
+       addr[0xAAA] = 0x00AA00AA ;
+       addr[0x555] = 0x00550055 ;
+       addr[0xAAA] = 0x00900090 ;
+
+       value = addr[0] ;
+       switch (value & 0x00FF00FF) {
+       case AMD_MANUFACT:                      /* AMD_MANUFACT =0x00010001 in flash.h */
+               info->flash_id = FLASH_MAN_AMD; /* FLASH_MAN_AMD=0x00000000 in flash.h */
+               break;
+       case FUJ_MANUFACT:
+               info->flash_id = FLASH_MAN_FUJ;
+               break;
+       default:
+               info->flash_id = FLASH_UNKNOWN;
+               info->sector_count = 0;
+               info->size = 0;
+               return (0);                     /* no or unknown flash  */
+       }
+
+       value = addr[2] ;                       /* device ID            */
+       switch (value & 0x00FF00FF) {
+       case (AMD_ID_LV400T & 0x00FF00FF):
+               info->flash_id += FLASH_AM400T;
+               info->sector_count = 11;
+               info->size = 0x00100000;
+               break;                          /* => 1 MB              */
+       case (AMD_ID_LV400B & 0x00FF00FF):
+               info->flash_id += FLASH_AM400B;
+               info->sector_count = 11;
+               info->size = 0x00100000;
+               break;                          /* => 1 MB              */
+       case (AMD_ID_LV800T & 0x00FF00FF):
+               info->flash_id += FLASH_AM800T;
+               info->sector_count = 19;
+               info->size = 0x00200000;
+               break;                          /* => 2 MB              */
+       case (AMD_ID_LV800B & 0x00FF00FF):
+               info->flash_id += FLASH_AM800B;
+               info->sector_count = 19;
+               info->size = 0x00400000;        /* Size doubled by yooth */
+               break;                          /* => 4 MB               */
+       case (AMD_ID_LV160T & 0x00FF00FF):
+               info->flash_id += FLASH_AM160T;
+               info->sector_count = 35;
+               info->size = 0x00400000;
+               break;                          /* => 4 MB              */
+       case (AMD_ID_LV160B & 0x00FF00FF):
+               info->flash_id += FLASH_AM160B;
+               info->sector_count = 35;
+               info->size = 0x00400000;
+               break;                          /* => 4 MB              */
+       case (AMD_ID_DL323B & 0x00FF00FF):
+               info->flash_id += FLASH_AMDL323B;
+               info->sector_count = 71;
+               info->size = 0x01000000;
+               break;                          /* => 16 MB(4x4MB)  */
+       /* AMD_ID_DL323B= 0x22532253  FLASH_AMDL323B= 0x0013
+        * AMD_ID_DL323B could be found in <flash.h>.[SAM]
+        * So we could get : flash_id = 0x00000013.
+        * The first four-bit represents VEDOR ID,leaving others for FLASH ID. */
+       default:
+               info->flash_id = FLASH_UNKNOWN;
+               return (0);                     /* => no or unknown flash */
+
+       }
+       /* set up sector start address table */
+       if (info->flash_id & FLASH_BTYPE) {
+       /* FLASH_BTYPE=0x0001 mask for bottom boot sector type.If the last bit equals 1,
+        * it means bottom boot flash. GOOD IDEA! [SAM]
+        */
+
+       /* set sector offsets for bottom boot block type        */
+               info->start[0] = base + 0x00000000;
+               info->start[1] = base + 0x00008000;
+               info->start[2] = base + 0x00010000;
+               info->start[3] = base + 0x00018000;
+               info->start[4] = base + 0x00020000;
+               info->start[5] = base + 0x00028000;
+               info->start[6] = base + 0x00030000;
+               info->start[7] = base + 0x00038000;
+
+               for (i = 8; i < info->sector_count; i++) {
+                       info->start[i] = base + ((i-7) * 0x00040000) ;
+               }
+       } else {
+               /* set sector offsets for top boot block type           */
+               i = info->sector_count - 1;
+               info->start[i--] = base + info->size - 0x00010000;
+               info->start[i--] = base + info->size - 0x00018000;
+               info->start[i--] = base + info->size - 0x00020000;
+               for (; i >= 0; i--) {
+                       info->start[i] = base + i * 0x00040000;
+               }
+       }
+
+       /* check for protected sectors */
+       for (i = 0; i < info->sector_count; i++) {
+               /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+               /* D0 = 1 if protected */
+               addr = (volatile unsigned long *)(info->start[i]);
+               /* info->protect[i] = addr[4] & 1 ; */
+               /* Mask it for disorder FLASH protection **[Sam]** */
+       }
+
+       /*
+        * Prevent writes to uninitialized FLASH.
+        */
+       if (info->flash_id != FLASH_UNKNOWN) {
+               addr = (volatile unsigned long *)info->start[0];
+
+               *addr = 0xF0F0F0F0;     /* reset bank */
+       }
+       return (info->size);
+}
+
+int    flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+       vu_long *addr = (vu_long*)(info->start[0]);
+       int flag, prot, sect, l_sect;
+       ulong start, now, last;
+
+       if ((s_first < 0) || (s_first > s_last)) {
+               if (info->flash_id == FLASH_UNKNOWN) {
+                       printf ("- missing\n");
+               } else {
+                       printf ("- no sectors to erase\n");
+               }
+               return 1;
+       }
+
+       if ((info->flash_id == FLASH_UNKNOWN) ||
+           (info->flash_id > FLASH_AMD_COMP)) {
+               printf ("Can't erase unknown flash type %08lx - aborted\n",
+                       info->flash_id);
+               return 1;
+       }
+
+       prot = 0;
+       for (sect=s_first; sect<=s_last; ++sect) {
+               if (info->protect[sect]) {
+                       prot++;
+               }
+       }
+
+       if (prot) {
+               printf ("- Warning: %d protected sectors will not be erased!\n",
+                       prot);
+       } else {
+               printf ("\n");
+       }
+
+       l_sect = -1;
+
+       /* Disable interrupts which might cause a timeout here */
+       flag = disable_interrupts();
+
+       addr[0xAAA] = 0xAAAAAAAA;
+       addr[0x555] = 0x55555555;
+       addr[0xAAA] = 0x80808080;
+       addr[0xAAA] = 0xAAAAAAAA;
+       addr[0x555] = 0x55555555;
+
+       /* Start erase on unprotected sectors */
+       for (sect = s_first; sect<=s_last; sect++) {
+               if (info->protect[sect] == 0) { /* not protected */
+                       addr = (vu_long *)(info->start[sect]) ;
+                       addr[0] = 0x30303030 ;
+                       l_sect = sect;
+               }
+       }
+
+       /* re-enable interrupts if necessary */
+       if (flag)
+               enable_interrupts();
+
+       /* wait at least 80us - let's wait 1 ms */
+       udelay (1000);
+
+       /*
+        * We wait for the last triggered sector
+        */
+       if (l_sect < 0)
+               goto DONE;
+
+       start = get_timer (0);
+       last  = start;
+       addr = (vu_long *)(info->start[l_sect]);
+       while ((addr[0] & 0x80808080) != 0x80808080) {
+               if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+                       printf ("Timeout\n");
+                       return 1;
+               }
+               /* show that we're waiting */
+               if ((now - last) > 1000) {      /* every second */
+                       putc ('.');
+                       last = now;
+               }
+       }
+
+DONE:
+       /* reset to read mode */
+       addr = (vu_long *)info->start[0];
+       addr[0] = 0xF0F0F0F0;   /* reset bank */
+
+       printf (" done\n");
+       return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+       ulong cp, wp, data;
+       int i, l, rc;
+
+       wp = (addr & ~3);       /* get lower word aligned address */
+
+       /*
+        * handle unaligned start bytes
+        */
+       if ((l = addr - wp) != 0) {
+               data = 0;
+               for (i=0, cp=wp; i<l; ++i, ++cp) {
+                       data = (data << 8) | (*(uchar *)cp);
+               }
+               for (; i<4 && cnt>0; ++i) {
+                       data = (data << 8) | *src++;
+                       --cnt;
+                       ++cp;
+               }
+               for (; cnt==0 && i<4; ++i, ++cp) {
+                       data = (data << 8) | (*(uchar *)cp);
+               }
+
+               if ((rc = write_word(info, wp, data)) != 0) {
+                       return (rc);
+               }
+               wp += 4;
+       }
+
+       /*
+        * handle word aligned part
+        */
+       while (cnt >= 4) {
+               data = 0;
+               for (i=0; i<4; ++i) {
+                       data = (data << 8) | *src++;
+               }
+               if ((rc = write_word(info, wp, data)) != 0) {
+                       return (rc);
+               }
+               wp  += 4;
+               cnt -= 4;
+       }
+
+       if (cnt == 0) {
+               return (0);
+       }
+
+       /*
+        * handle unaligned tail bytes
+        */
+       data = 0;
+       for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+               data = (data << 8) | *src++;
+               --cnt;
+       }
+       for (; i<4; ++i, ++cp) {
+               data = (data << 8) | (*(uchar *)cp);
+       }
+       return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+       vu_long *addr = (vu_long *)(info->start[0]);
+       ulong start;
+       int flag;
+
+       /* Check if Flash is (sufficiently) erased */
+       if ((*((vu_long *)dest) & data) != data) {
+               return (2);
+       }
+       /* Disable interrupts which might cause a timeout here */
+       flag = disable_interrupts();
+
+       addr[0xAAA] = 0xAAAAAAAA;
+       addr[0x555] = 0x55555555;
+       addr[0xAAA] = 0xA0A0A0A0;
+
+       *((vu_long *)dest) = data;
+
+       /* re-enable interrupts if necessary */
+       if (flag)
+               enable_interrupts();
+
+       /* data polling for D7 */
+       start = get_timer (0);
+       while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+                       return (1);
+               }
+       }
+       return (0);
+}