Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / LEOX / elpt860 / flash.c
diff --git a/qemu/roms/u-boot/board/LEOX/elpt860/flash.c b/qemu/roms/u-boot/board/LEOX/elpt860/flash.c
new file mode 100644 (file)
index 0000000..0377c89
--- /dev/null
@@ -0,0 +1,602 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+**   for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+ * SPDX-License-Identifier:    GPL-2.0+
+**
+**=====================================================================
+*/
+
+/*
+** Note 1: In this file, you have to provide the following variable:
+** ------
+**              flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]
+** 'flash_info_t' structure is defined into 'include/flash.h'
+** and defined as extern into 'common/cmd_flash.c'
+**
+** Note 2: In this file, you have to provide the following functions:
+** ------
+**              unsigned long   flash_init(void)
+** called from 'board_init_r()' into 'common/board.c'
+**
+**              void            flash_print_info(flash_info_t *info)
+** called from 'do_flinfo()' into 'common/cmd_flash.c'
+**
+**              int             flash_erase(flash_info_t *info,
+**                                          int           s_first,
+**                                          int           s_last)
+** called from 'do_flerase()' & 'flash_sect_erase()' into 'common/cmd_flash.c'
+**
+**              int             write_buff (flash_info_t *info,
+**                                          uchar        *src,
+**                                          ulong         addr,
+**                                          ulong         cnt)
+** called from 'flash_write()' into 'common/cmd_flash.c'
+*/
+
+#include <common.h>
+#include <mpc8xx.h>
+
+
+#ifndef        CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR      (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#endif
+
+flash_info_t   flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Internal Functions
+ */
+static void   flash_get_offsets (ulong base, flash_info_t *info);
+static ulong  flash_get_size (volatile unsigned char *addr, flash_info_t *info);
+
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int write_byte (flash_info_t *info, ulong dest, uchar data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long
+flash_init (void)
+{
+  volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
+  volatile memctl8xx_t *memctl = &immap->im_memctl;
+  unsigned long         size_b0;
+  int i;
+
+  /* Init: no FLASHes known */
+  for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
+    {
+      flash_info[i].flash_id = FLASH_UNKNOWN;
+    }
+
+  /* Static FLASH Bank configuration here - FIXME XXX */
+
+  size_b0 = flash_get_size ((volatile unsigned char *)FLASH_BASE0_PRELIM,
+                           &flash_info[0]);
+
+  if ( flash_info[0].flash_id == FLASH_UNKNOWN )
+    {
+      printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+             size_b0, size_b0<<20);
+    }
+
+  /* Remap FLASH according to real size */
+  memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+  memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V;
+
+  /* Re-do sizing to get full correct info */
+  size_b0 = flash_get_size ((volatile unsigned char *)CONFIG_SYS_FLASH_BASE,
+                           &flash_info[0]);
+
+  flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+  /* monitor protection ON by default */
+  flash_protect (FLAG_PROTECT_SET,
+                CONFIG_SYS_MONITOR_BASE,
+                CONFIG_SYS_MONITOR_BASE + monitor_flash_len-1,
+                &flash_info[0]);
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+  /* ENV protection ON by default */
+  flash_protect(FLAG_PROTECT_SET,
+               CONFIG_ENV_ADDR,
+               CONFIG_ENV_ADDR + CONFIG_ENV_SIZE-1,
+               &flash_info[0]);
+#endif
+
+  flash_info[0].size = size_b0;
+
+  return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void
+flash_get_offsets (ulong          base,
+                  flash_info_t  *info)
+{
+  int i;
+
+#define SECTOR_64KB    0x00010000
+
+  /* set up sector start adress table */
+  for (i = 0; i < info->sector_count; i++)
+    {
+      info->start[i] = base + (i * SECTOR_64KB);
+    }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void
+flash_print_info (flash_info_t *info)
+{
+  int i;
+
+  if ( info->flash_id == FLASH_UNKNOWN )
+    {
+      printf ("missing or unknown FLASH type\n");
+      return;
+    }
+
+  switch ( info->flash_id & FLASH_VENDMASK )
+    {
+    case FLASH_MAN_AMD:        printf ("AMD ");                break;
+    case FLASH_MAN_FUJ:        printf ("FUJITSU ");            break;
+    case FLASH_MAN_STM: printf ("STM (Thomson) ");      break;
+    default:           printf ("Unknown Vendor ");     break;
+    }
+
+  switch ( info->flash_id & FLASH_TYPEMASK )
+    {
+    case FLASH_AM040:   printf ("AM29F040   (4 Mbits)\n");
+      break;
+    default:           printf ("Unknown Chip Type\n");
+      break;
+    }
+
+  printf ("  Size: %ld KB in %d Sectors\n",
+         info->size >> 10, info->sector_count);
+
+  printf ("  Sector Start Addresses:");
+  for (i=0; i<info->sector_count; ++i)
+    {
+      if ((i % 5) == 0)
+       printf ("\n   ");
+      printf (" %08lX%s",
+             info->start[i],
+             info->protect[i] ? " (RO)" : "     "
+             );
+    }
+  printf ("\n");
+
+  return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong
+flash_get_size (volatile unsigned char *addr,
+               flash_info_t           *info)
+{
+  short i;
+  uchar value;
+  ulong base = (ulong)addr;
+
+  /* Write auto select command: read Manufacturer ID */
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+  addr[0x0555] = 0x90;
+
+  value = addr[0];
+
+  switch ( value )
+    {
+      /*    case AMD_MANUFACT: */
+    case 0x01:
+      info->flash_id = FLASH_MAN_AMD;
+      break;
+      /*    case FUJ_MANUFACT: */
+    case 0x04:
+      info->flash_id = FLASH_MAN_FUJ;
+      break;
+      /*    case STM_MANUFACT: */
+    case 0x20:
+      info->flash_id = FLASH_MAN_STM;
+      break;
+
+    default:
+      info->flash_id = FLASH_UNKNOWN;
+      info->sector_count = 0;
+      info->size = 0;
+      return (0);                      /* no or unknown flash  */
+    }
+
+  value = addr[1];                     /* device ID            */
+
+  switch ( value )
+    {
+    case STM_ID_F040B:
+    case AMD_ID_F040B:
+      info->flash_id += FLASH_AM040;    /* 4 Mbits = 512k * 8  */
+      info->sector_count = 8;
+      info->size = 0x00080000;
+      break;
+
+    default:
+      info->flash_id = FLASH_UNKNOWN;
+      return (0);                      /* => no or unknown flash */
+    }
+
+  /* set up sector start adress table */
+  for (i = 0; i < info->sector_count; i++)
+    {
+      info->start[i] = base + (i * 0x00010000);
+    }
+
+  /* check for protected sectors */
+  for (i = 0; i < info->sector_count; i++)
+    {
+      /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+      /* D0 = 1 if protected */
+      addr = (volatile unsigned char *)(info->start[i]);
+      info->protect[i] = addr[2] & 1;
+    }
+
+  /*
+   * Prevent writes to uninitialized FLASH.
+   */
+  if ( info->flash_id != FLASH_UNKNOWN )
+    {
+      addr = (volatile unsigned char *)info->start[0];
+
+      *addr = 0xF0;    /* reset bank */
+    }
+
+  return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int
+flash_erase (flash_info_t  *info,
+            int            s_first,
+            int            s_last)
+{
+  volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
+  int flag, prot, sect, l_sect;
+  ulong start, now, last;
+
+  if ( (s_first < 0) || (s_first > s_last) )
+    {
+      if ( info->flash_id == FLASH_UNKNOWN )
+       {
+         printf ("- missing\n");
+       }
+      else
+       {
+         printf ("- no sectors to erase\n");
+       }
+      return ( 1 );
+    }
+
+  if ( (info->flash_id == FLASH_UNKNOWN) ||
+       (info->flash_id > FLASH_AMD_COMP) )
+    {
+      printf ("Can't erase unknown flash type %08lx - aborted\n",
+             info->flash_id);
+      return ( 1 );
+    }
+
+  prot = 0;
+  for (sect=s_first; sect<=s_last; ++sect)
+    {
+      if ( info->protect[sect] )
+       {
+         prot++;
+       }
+    }
+
+  if ( prot )
+    {
+      printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+    }
+  else
+    {
+      printf ("\n");
+    }
+
+  l_sect = -1;
+
+  /* Disable interrupts which might cause a timeout here */
+  flag = disable_interrupts();
+
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+  addr[0x0555] = 0x80;
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+
+  /* Start erase on unprotected sectors */
+  for (sect = s_first; sect<=s_last; sect++)
+    {
+      if (info->protect[sect] == 0)    /* not protected */
+       {
+         addr = (volatile unsigned char *)(info->start[sect]);
+         addr[0] = 0x30;
+         l_sect = sect;
+       }
+    }
+
+  /* re-enable interrupts if necessary */
+  if ( flag )
+    enable_interrupts();
+
+  /* wait at least 80us - let's wait 1 ms */
+  udelay (1000);
+
+  /*
+   * We wait for the last triggered sector
+   */
+  if ( l_sect < 0 )
+    goto DONE;
+
+  start = get_timer (0);
+  last  = start;
+  addr = (volatile unsigned char *)(info->start[l_sect]);
+  while ( (addr[0] & 0x80) != 0x80 )
+    {
+      if ( (now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT )
+       {
+         printf ("Timeout\n");
+         return ( 1 );
+       }
+      /* show that we're waiting */
+      if ( (now - last) > 1000 )     /* every second */
+       {
+         putc ('.');
+         last = now;
+       }
+    }
+
+DONE:
+  /* reset to read mode */
+  addr = (volatile unsigned char *)info->start[0];
+  addr[0] = 0xF0;      /* reset bank */
+
+  printf (" done\n");
+
+  return ( 0 );
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int
+write_buff (flash_info_t  *info,
+           uchar         *src,
+           ulong          addr,
+           ulong          cnt)
+{
+  ulong cp, wp, data;
+  uchar bdata;
+  int i, l, rc;
+
+  if ( (info->flash_id & FLASH_TYPEMASK) == FLASH_AM040 )
+    {
+      /* Width of the data bus: 8 bits */
+
+      wp = addr;
+
+      while ( cnt )
+       {
+         bdata = *src++;
+
+         if ( (rc = write_byte(info, wp, bdata)) != 0 )
+           {
+             return (rc);
+           }
+
+         ++wp;
+         --cnt;
+       }
+
+      return ( 0 );
+    }
+  else
+    {
+      /* Width of the data bus: 32 bits */
+
+      wp = (addr & ~3);        /* get lower word aligned address */
+
+      /*
+       * handle unaligned start bytes
+       */
+      if ( (l = addr - wp) != 0 )
+       {
+         data = 0;
+         for (i=0, cp=wp; i<l; ++i, ++cp)
+           {
+             data = (data << 8) | (*(uchar *)cp);
+           }
+         for (; i<4 && cnt>0; ++i)
+           {
+             data = (data << 8) | *src++;
+             --cnt;
+             ++cp;
+           }
+         for (; cnt==0 && i<4; ++i, ++cp)
+           {
+             data = (data << 8) | (*(uchar *)cp);
+           }
+
+         if ( (rc = write_word(info, wp, data)) != 0 )
+           {
+             return (rc);
+           }
+         wp += 4;
+       }
+
+      /*
+       * handle word aligned part
+       */
+      while ( cnt >= 4 )
+       {
+         data = 0;
+         for (i=0; i<4; ++i)
+           {
+             data = (data << 8) | *src++;
+           }
+         if ( (rc = write_word(info, wp, data)) != 0 )
+           {
+             return (rc);
+           }
+         wp  += 4;
+         cnt -= 4;
+       }
+
+      if ( cnt == 0 )
+       {
+         return (0);
+       }
+
+      /*
+       * handle unaligned tail bytes
+       */
+      data = 0;
+      for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp)
+       {
+         data = (data << 8) | *src++;
+         --cnt;
+       }
+      for (; i<4; ++i, ++cp)
+       {
+         data = (data << 8) | (*(uchar *)cp);
+       }
+
+      return (write_word(info, wp, data));
+    }
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int
+write_word (flash_info_t  *info,
+           ulong          dest,
+           ulong          data)
+{
+  vu_long *addr = (vu_long*)(info->start[0]);
+  ulong start;
+  int flag;
+
+  /* Check if Flash is (sufficiently) erased */
+  if ( (*((vu_long *)dest) & data) != data )
+    {
+      return (2);
+    }
+  /* Disable interrupts which might cause a timeout here */
+  flag = disable_interrupts();
+
+  addr[0x0555] = 0x00AA00AA;
+  addr[0x02AA] = 0x00550055;
+  addr[0x0555] = 0x00A000A0;
+
+  *((vu_long *)dest) = data;
+
+  /* re-enable interrupts if necessary */
+  if ( flag )
+    enable_interrupts();
+
+  /* data polling for D7 */
+  start = get_timer (0);
+  while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) )
+    {
+      if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT )
+       {
+         return (1);
+       }
+    }
+
+  return (0);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a byte to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int
+write_byte (flash_info_t  *info,
+           ulong          dest,
+           uchar          data)
+{
+  volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
+  ulong  start;
+  int    flag;
+
+  /* Check if Flash is (sufficiently) erased */
+  if ( (*((volatile unsigned char *)dest) & data) != data )
+    {
+      return (2);
+    }
+  /* Disable interrupts which might cause a timeout here */
+  flag = disable_interrupts();
+
+  addr[0x0555] = 0xAA;
+  addr[0x02AA] = 0x55;
+  addr[0x0555] = 0xA0;
+
+  *((volatile unsigned char *)dest) = data;
+
+  /* re-enable interrupts if necessary */
+  if ( flag )
+    enable_interrupts();
+
+  /* data polling for D7 */
+  start = get_timer (0);
+  while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) )
+    {
+      if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT )
+       {
+         return (1);
+       }
+    }
+
+  return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */