Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / arch / powerpc / include / asm / ppc405ex.h

diff --git a/qemu/roms/u-boot/arch/powerpc/include/asm/ppc405ex.h b/qemu/roms/u-boot/arch/powerpc/include/asm/ppc405ex.h
new file mode 100644 (file)
index 0000000..083405c
--- /dev/null
+++ b/qemu/roms/u-boot/arch/powerpc/include/asm/ppc405ex.h
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef _PPC405EX_H_
+#define _PPC405EX_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_DDR2   /* IBM DDR(2) controller */
+
+#define CONFIG_NAND_NDFC
+
+/* Memory mapped register */
+#define CONFIG_SYS_PERIPHERAL_BASE     0xef600000 /* Internal Peripherals */
+
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_PERIPHERAL_BASE + 0x0200)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
+
+#define GPIO0_BASE             (CONFIG_SYS_PERIPHERAL_BASE + 0x0800)
+
+/* SDR */
+#define SDR0_SDCS0             0x0060
+#define SDR0_UART0             0x0120  /* UART0 Config */
+#define SDR0_UART1             0x0121  /* UART1 Config */
+#define SDR0_SRST              0x0200
+#define SDR0_CUST0             0x4000
+#define SDR0_PFC0              0x4100
+#define SDR0_PFC1              0x4101
+#define SDR0_MFR               0x4300  /* SDR0_MFR reg */
+
+#define SDR0_ECID0             0x0080
+#define SDR0_ECID1             0x0081
+#define SDR0_ECID2             0x0082
+#define SDR0_ECID3             0x0083
+
+#define SDR0_SDCS_SDD          (0x80000000 >> 31)
+
+#define SDR0_SRST_DMC          (0x80000000 >> 10)
+
+#define SDR0_CUST0_MUX_E_N_G_MASK      0xC0000000 /* Mux_Emac_NDFC_GPIO */
+#define SDR0_CUST0_MUX_EMAC_SEL                0x40000000 /* Emac Selection */
+#define SDR0_CUST0_MUX_NDFC_SEL                0x80000000 /* NDFC Selection */
+#define SDR0_CUST0_MUX_GPIO_SEL                0xC0000000 /* GPIO Selection */
+
+#define SDR0_CUST0_NDFC_EN_MASK                0x20000000 /* NDFC Enable Mask */
+#define SDR0_CUST0_NDFC_ENABLE         0x20000000 /* NDFC Enable */
+#define SDR0_CUST0_NDFC_DISABLE                0x00000000 /* NDFC Disable */
+
+#define SDR0_CUST0_NDFC_BW_MASK                0x10000000 /* NDFC Boot Width */
+#define SDR0_CUST0_NDFC_BW_16_BIT      0x10000000 /* NDFC Boot Width= 16 Bit */
+#define SDR0_CUST0_NDFC_BW_8_BIT       0x00000000 /* NDFC Boot Width=  8 Bit */
+
+#define SDR0_CUST0_NDFC_BP_MASK                0x0F000000 /* NDFC Boot Page */
+#define SDR0_CUST0_NDFC_BP_ENCODE(n)   ((((u32)(n)) & 0xF) << 24)
+#define SDR0_CUST0_NDFC_BP_DECODE(n)   ((((u32)(n)) >> 24) & 0xF)
+
+#define SDR0_CUST0_NDFC_BAC_MASK       0x00C00000 /* NDFC Boot Address Cycle */
+#define SDR0_CUST0_NDFC_BAC_ENCODE(n)  ((((u32)(n)) & 0x3) << 22)
+#define SDR0_CUST0_NDFC_BAC_DECODE(n)  ((((u32)(n)) >> 22) & 0x3)
+
+#define SDR0_CUST0_NDFC_ARE_MASK       0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_ENABLE     0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_DISABLE    0x00000000 /* NDFC Auto Read Disable */
+
+#define SDR0_CUST0_NRB_MASK            0x00100000 /* NDFC Ready / Busy */
+#define SDR0_CUST0_NRB_BUSY            0x00100000 /* Busy */
+#define SDR0_CUST0_NRB_READY           0x00000000 /* Ready */
+
+#define SDR0_PFC1_U1ME                 0x02000000
+#define SDR0_PFC1_U0ME                 0x00080000
+#define SDR0_PFC1_U0IM                 0x00040000
+#define SDR0_PFC1_SIS                  0x00020000
+#define SDR0_PFC1_DMAAEN               0x00010000
+#define SDR0_PFC1_DMADEN               0x00008000
+#define SDR0_PFC1_USBEN                        0x00004000
+#define SDR0_PFC1_AHBSWAP              0x00000020
+#define SDR0_PFC1_USBBIGEN             0x00000010
+#define SDR0_PFC1_GPT_FREQ             0x0000000f
+
+#endif /* _PPC405EX_H_ */