--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_440)
+
+#include <asm/ppc440.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+
+typedef struct region {
+ u64 base;
+ u32 size;
+ u32 tlb_word2_i_value;
+} region_t;
+
+void remove_tlb(u32 vaddr, u32 size)
+{
+ int i;
+ u32 tlb_word0_value;
+ u32 tlb_vaddr;
+ u32 tlb_size = 0;
+
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
+ if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
+ (tlb_vaddr >= vaddr)) {
+ /*
+ * TLB is enabled and start address is lower or equal
+ * than the area we are looking for. Now we only have
+ * to check the size/end address for a match.
+ */
+ switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
+ case TLB_WORD0_SIZE_1KB:
+ tlb_size = 1 << 10;
+ break;
+ case TLB_WORD0_SIZE_4KB:
+ tlb_size = 4 << 10;
+ break;
+ case TLB_WORD0_SIZE_16KB:
+ tlb_size = 16 << 10;
+ break;
+ case TLB_WORD0_SIZE_64KB:
+ tlb_size = 64 << 10;
+ break;
+ case TLB_WORD0_SIZE_256KB:
+ tlb_size = 256 << 10;
+ break;
+ case TLB_WORD0_SIZE_1MB:
+ tlb_size = 1 << 20;
+ break;
+ case TLB_WORD0_SIZE_16MB:
+ tlb_size = 16 << 20;
+ break;
+ case TLB_WORD0_SIZE_256MB:
+ tlb_size = 256 << 20;
+ break;
+ }
+
+ /*
+ * Now check the end-address if it's in the range
+ */
+ if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
+ /*
+ * Found a TLB in the range.
+ * Disable it by writing 0 to tlb0 word.
+ */
+ mttlb1(i, 0);
+ }
+ }
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+}
+
+/*
+ * Change the I attribute (cache inhibited) of a TLB or multiple TLB's.
+ * This function is used to either turn cache on or off in a specific
+ * memory area.
+ */
+void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value)
+{
+ int i;
+ u32 tlb_word0_value;
+ u32 tlb_word2_value;
+ u32 tlb_vaddr;
+ u32 tlb_size = 0;
+
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
+ if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
+ (tlb_vaddr >= vaddr)) {
+ /*
+ * TLB is enabled and start address is lower or equal
+ * than the area we are looking for. Now we only have
+ * to check the size/end address for a match.
+ */
+ switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
+ case TLB_WORD0_SIZE_1KB:
+ tlb_size = 1 << 10;
+ break;
+ case TLB_WORD0_SIZE_4KB:
+ tlb_size = 4 << 10;
+ break;
+ case TLB_WORD0_SIZE_16KB:
+ tlb_size = 16 << 10;
+ break;
+ case TLB_WORD0_SIZE_64KB:
+ tlb_size = 64 << 10;
+ break;
+ case TLB_WORD0_SIZE_256KB:
+ tlb_size = 256 << 10;
+ break;
+ case TLB_WORD0_SIZE_1MB:
+ tlb_size = 1 << 20;
+ break;
+ case TLB_WORD0_SIZE_16MB:
+ tlb_size = 16 << 20;
+ break;
+ case TLB_WORD0_SIZE_256MB:
+ tlb_size = 256 << 20;
+ break;
+ }
+
+ /*
+ * Now check the end-address if it's in the range
+ */
+ if (((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1)) ||
+ ((tlb_vaddr < (vaddr + size - 1)) &&
+ ((tlb_vaddr + tlb_size - 1) > (vaddr + size - 1)))) {
+ /*
+ * Found a TLB in the range.
+ * Change cache attribute in tlb2 word.
+ */
+ tlb_word2_value =
+ TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
+ TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
+ TLB_WORD2_W_DISABLE | tlb_word2_i_value |
+ TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
+ TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
+ TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
+ TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
+ TLB_WORD2_SR_ENABLE;
+
+ /*
+ * Now either flush or invalidate the dcache
+ */
+ if (tlb_word2_i_value)
+ flush_dcache();
+ else
+ invalidate_dcache();
+
+ mttlb3(i, tlb_word2_value);
+ asm("iccci 0,0");
+ }
+ }
+ }
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+}
+
+static int add_tlb_entry(u64 phys_addr,
+ u32 virt_addr,
+ u32 tlb_word0_size_value,
+ u32 tlb_word2_i_value)
+{
+ int i;
+ unsigned long tlb_word0_value;
+ unsigned long tlb_word1_value;
+ unsigned long tlb_word2_value;
+
+ /* First, find the index of a TLB entry not being used */
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ if ((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_DISABLE)
+ break;
+ }
+ if (i >= PPC4XX_TLB_SIZE)
+ return -1;
+
+ /* Second, create the TLB entry */
+ tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE |
+ TLB_WORD0_TS_0 | tlb_word0_size_value;
+ tlb_word1_value = TLB_WORD1_RPN_ENCODE((u32)phys_addr) |
+ TLB_WORD1_ERPN_ENCODE(phys_addr >> 32);
+ tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
+ TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
+ TLB_WORD2_W_DISABLE | tlb_word2_i_value |
+ TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
+ TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
+ TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
+ TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
+ TLB_WORD2_SR_ENABLE;
+
+ /* Wait for all memory accesses to complete */
+ sync();
+
+ /* Third, add the TLB entries */
+ mttlb1(i, tlb_word0_value);
+ mttlb2(i, tlb_word1_value);
+ mttlb3(i, tlb_word2_value);
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+
+ return 0;
+}
+
+static void program_tlb_addr(u64 phys_addr,
+ u32 virt_addr,
+ u32 mem_size,
+ u32 tlb_word2_i_value)
+{
+ int rc;
+ int tlb_i;
+
+ tlb_i = tlb_word2_i_value;
+ while (mem_size != 0) {
+ rc = 0;
+ /* Add the TLB entries in to map the region. */
+ if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_256MB_SIZE)) {
+ /* Add a 256MB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
+ mem_size -= TLB_256MB_SIZE;
+ phys_addr += TLB_256MB_SIZE;
+ virt_addr += TLB_256MB_SIZE;
+ }
+ } else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_16MB_SIZE)) {
+ /* Add a 16MB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
+ mem_size -= TLB_16MB_SIZE;
+ phys_addr += TLB_16MB_SIZE;
+ virt_addr += TLB_16MB_SIZE;
+ }
+ } else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_1MB_SIZE)) {
+ /* Add a 1MB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
+ mem_size -= TLB_1MB_SIZE;
+ phys_addr += TLB_1MB_SIZE;
+ virt_addr += TLB_1MB_SIZE;
+ }
+ } else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_256KB_SIZE)) {
+ /* Add a 256KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
+ mem_size -= TLB_256KB_SIZE;
+ phys_addr += TLB_256KB_SIZE;
+ virt_addr += TLB_256KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_64KB_SIZE)) {
+ /* Add a 64KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
+ mem_size -= TLB_64KB_SIZE;
+ phys_addr += TLB_64KB_SIZE;
+ virt_addr += TLB_64KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_16KB_SIZE)) {
+ /* Add a 16KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
+ mem_size -= TLB_16KB_SIZE;
+ phys_addr += TLB_16KB_SIZE;
+ virt_addr += TLB_16KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_4KB_SIZE)) {
+ /* Add a 4KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
+ mem_size -= TLB_4KB_SIZE;
+ phys_addr += TLB_4KB_SIZE;
+ virt_addr += TLB_4KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_1KB_SIZE)) {
+ /* Add a 1KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
+ mem_size -= TLB_1KB_SIZE;
+ phys_addr += TLB_1KB_SIZE;
+ virt_addr += TLB_1KB_SIZE;
+ }
+ } else {
+ printf("ERROR: no TLB size exists for the base address 0x%llx.\n",
+ phys_addr);
+ }
+
+ if (rc != 0)
+ printf("ERROR: no TLB entries available for the base addr 0x%llx.\n",
+ phys_addr);
+ }
+
+ return;
+}
+
+/*
+ * Program one (or multiple) TLB entries for one memory region
+ *
+ * Common usage for boards with SDRAM DIMM modules to dynamically
+ * configure the TLB's for the SDRAM
+ */
+void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
+{
+ region_t region_array;
+
+ region_array.base = phys_addr;
+ region_array.size = size;
+ region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */
+
+ /* Call the routine to add in the tlb entries for the memory regions */
+ program_tlb_addr(region_array.base, virt_addr, region_array.size,
+ region_array.tlb_word2_i_value);
+
+ return;
+}
+
+#endif /* CONFIG_440 */
Code Review / kvmfornfv.git / blobdiff