--- /dev/null
+/*
+ * SPDX-License-Identifier: GPL-2.0 IBM-pibs
+ */
+/*-----------------------------------------------------------------------------+
+ |
+ | File Name: miiphy.c
+ |
+ | Function: This module has utilities for accessing the MII PHY through
+ | the EMAC3 macro.
+ |
+ | Author: Mark Wisner
+ |
+ +-----------------------------------------------------------------------------*/
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+#include <asm/ppc4xx-emac.h>
+#include <asm/ppc4xx-mal.h>
+#include <miiphy.h>
+
+#if !defined(CONFIG_PHY_CLK_FREQ)
+#define CONFIG_PHY_CLK_FREQ 0
+#endif
+
+/***********************************************************/
+/* Dump out to the screen PHY regs */
+/***********************************************************/
+
+void miiphy_dump (char *devname, unsigned char addr)
+{
+ unsigned long i;
+ unsigned short data;
+
+ for (i = 0; i < 0x1A; i++) {
+ if (miiphy_read (devname, addr, i, &data)) {
+ printf ("read error for reg %lx\n", i);
+ return;
+ }
+ printf ("Phy reg %lx ==> %4x\n", i, data);
+
+ /* jump to the next set of regs */
+ if (i == 0x07)
+ i = 0x0f;
+
+ } /* end for loop */
+} /* end dump */
+
+/***********************************************************/
+/* (Re)start autonegotiation */
+/***********************************************************/
+int phy_setup_aneg (char *devname, unsigned char addr)
+{
+ u16 bmcr;
+
+#if defined(CONFIG_PHY_DYNAMIC_ANEG)
+ /*
+ * Set up advertisement based on capablilities reported by the PHY.
+ * This should work for both copper and fiber.
+ */
+ u16 bmsr;
+#if defined(CONFIG_PHY_GIGE)
+ u16 exsr = 0x0000;
+#endif
+
+ miiphy_read (devname, addr, MII_BMSR, &bmsr);
+
+#if defined(CONFIG_PHY_GIGE)
+ if (bmsr & BMSR_ESTATEN)
+ miiphy_read (devname, addr, MII_ESTATUS, &exsr);
+
+ if (exsr & (ESTATUS_1000XF | ESTATUS_1000XH)) {
+ /* 1000BASE-X */
+ u16 anar = 0x0000;
+
+ if (exsr & ESTATUS_1000XF)
+ anar |= ADVERTISE_1000XFULL;
+
+ if (exsr & ESTATUS_1000XH)
+ anar |= ADVERTISE_1000XHALF;
+
+ miiphy_write (devname, addr, MII_ADVERTISE, anar);
+ } else
+#endif
+ {
+ u16 anar, btcr;
+
+ miiphy_read (devname, addr, MII_ADVERTISE, &anar);
+ anar &= ~(0x5000 | LPA_100BASE4 | LPA_100FULL |
+ LPA_100HALF | LPA_10FULL | LPA_10HALF);
+
+ miiphy_read (devname, addr, MII_CTRL1000, &btcr);
+ btcr &= ~(0x00FF | PHY_1000BTCR_1000FD | PHY_1000BTCR_1000HD);
+
+ if (bmsr & BMSR_100BASE4)
+ anar |= LPA_100BASE4;
+
+ if (bmsr & BMSR_100FULL)
+ anar |= LPA_100FULL;
+
+ if (bmsr & BMSR_100HALF)
+ anar |= LPA_100HALF;
+
+ if (bmsr & BMSR_10FULL)
+ anar |= LPA_10FULL;
+
+ if (bmsr & BMSR_10HALF)
+ anar |= LPA_10HALF;
+
+ miiphy_write (devname, addr, MII_ADVERTISE, anar);
+
+#if defined(CONFIG_PHY_GIGE)
+ if (exsr & ESTATUS_1000_TFULL)
+ btcr |= PHY_1000BTCR_1000FD;
+
+ if (exsr & ESTATUS_1000_THALF)
+ btcr |= PHY_1000BTCR_1000HD;
+
+ miiphy_write (devname, addr, MII_CTRL1000, btcr);
+#endif
+ }
+
+#else /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
+ /*
+ * Set up standard advertisement
+ */
+ u16 adv;
+
+ miiphy_read (devname, addr, MII_ADVERTISE, &adv);
+ adv |= (LPA_LPACK | LPA_100FULL | LPA_100HALF |
+ LPA_10FULL | LPA_10HALF);
+ miiphy_write (devname, addr, MII_ADVERTISE, adv);
+
+ miiphy_read (devname, addr, MII_CTRL1000, &adv);
+ adv |= (0x0300);
+ miiphy_write (devname, addr, MII_CTRL1000, adv);
+
+#endif /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
+
+ /* Start/Restart aneg */
+ miiphy_read (devname, addr, MII_BMCR, &bmcr);
+ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ miiphy_write (devname, addr, MII_BMCR, bmcr);
+
+ return 0;
+}
+
+/***********************************************************/
+/* read a phy reg and return the value with a rc */
+/***********************************************************/
+/* AMCC_TODO:
+ * Find out of the choice for the emac for MDIO is from the bridges,
+ * i.e. ZMII or RGMII as approporiate. If the bridges are not used
+ * to determine the emac for MDIO, then is the SDR0_ETH_CFG[MDIO_SEL]
+ * used? If so, then this routine below does not apply to the 460EX/GT.
+ *
+ * sr: Currently on 460EX only EMAC0 works with MDIO, so we always
+ * return EMAC0 offset here
+ * vg: For 460EX/460GT if internal GPCS PHY address is specified
+ * return appropriate EMAC offset
+ */
+unsigned int miiphy_getemac_offset(u8 addr)
+{
+#if defined(CONFIG_440) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_460EX) && !defined(CONFIG_460GT)
+ unsigned long zmii;
+ unsigned long eoffset;
+
+ /* Need to find out which mdi port we're using */
+ zmii = in_be32((void *)ZMII0_FER);
+
+ if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0)))
+ /* using port 0 */
+ eoffset = 0;
+
+ else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1)))
+ /* using port 1 */
+ eoffset = 0x100;
+
+ else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2)))
+ /* using port 2 */
+ eoffset = 0x400;
+
+ else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3)))
+ /* using port 3 */
+ eoffset = 0x600;
+
+ else {
+ /* None of the mdi ports are enabled! */
+ /* enable port 0 */
+ zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
+ out_be32((void *)ZMII0_FER, zmii);
+ eoffset = 0;
+ /* need to soft reset port 0 */
+ zmii = in_be32((void *)EMAC0_MR0);
+ zmii |= EMAC_MR0_SRST;
+ out_be32((void *)EMAC0_MR0, zmii);
+ }
+
+ return (eoffset);
+#else
+
+#if defined(CONFIG_405EX)
+ unsigned long rgmii;
+ int devnum = 1;
+
+ rgmii = in_be32((void *)RGMII_FER);
+ if (rgmii & (1 << (19 - devnum)))
+ return 0x100;
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ u32 eoffset = 0;
+
+ switch (addr) {
+#if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR)
+ case CONFIG_GPCS_PHY1_ADDR:
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x100)))
+ eoffset = 0x100;
+ break;
+#endif
+#if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR)
+ case CONFIG_GPCS_PHY2_ADDR:
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x300)))
+ eoffset = 0x300;
+ break;
+#endif
+#if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR)
+ case CONFIG_GPCS_PHY3_ADDR:
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x400)))
+ eoffset = 0x400;
+ break;
+#endif
+ default:
+ eoffset = 0;
+ break;
+ }
+ return eoffset;
+#endif
+
+ return 0;
+#endif
+}
+
+static int emac_miiphy_wait(u32 emac_reg)
+{
+ u32 sta_reg;
+ int i;
+
+ /* wait for completion */
+ i = 0;
+ do {
+ sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
+ if (i++ > 5) {
+ debug("%s [%d]: Timeout! EMAC0_STACR=0x%0x\n", __func__,
+ __LINE__, sta_reg);
+ return -1;
+ }
+ udelay(10);
+ } while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK);
+
+ return 0;
+}
+
+static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
+{
+ u32 emac_reg;
+ u32 sta_reg;
+
+ emac_reg = miiphy_getemac_offset(addr);
+
+ /* wait for completion */
+ if (emac_miiphy_wait(emac_reg) != 0)
+ return -1;
+
+ sta_reg = reg; /* reg address */
+
+ /* set clock (50MHz) and read flags */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_405EX)
+#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
+ sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | cmd;
+#else
+ sta_reg |= cmd;
+#endif
+#else
+ sta_reg = (sta_reg | cmd) & ~EMAC_STACR_CLK_100MHZ;
+#endif
+
+ /* Some boards (mainly 405EP based) define the PHY clock freqency fixed */
+ sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
+ sta_reg = sta_reg | ((u32)addr << 5); /* Phy address */
+ sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
+ if (cmd == EMAC_STACR_WRITE)
+ memcpy(&sta_reg, &value, 2); /* put in data */
+
+ out_be32((void *)EMAC0_STACR + emac_reg, sta_reg);
+ debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
+
+ /* wait for completion */
+ if (emac_miiphy_wait(emac_reg) != 0)
+ return -1;
+
+ debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
+ if ((sta_reg & EMAC_STACR_PHYE) != 0)
+ return -1;
+
+ return 0;
+}
+
+int emac4xx_miiphy_read (const char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
+{
+ unsigned long sta_reg;
+ unsigned long emac_reg;
+
+ emac_reg = miiphy_getemac_offset(addr);
+
+ if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
+ return -1;
+
+ sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
+ *value = sta_reg >> 16;
+
+ return 0;
+}
+
+/***********************************************************/
+/* write a phy reg and return the value with a rc */
+/***********************************************************/
+
+int emac4xx_miiphy_write (const char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value)
+{
+ return emac_miiphy_command(addr, reg, EMAC_STACR_WRITE, value);
+}
Code Review / kvmfornfv.git / blobdiff