--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * m8xx.c
+ *
+ * CPU specific code
+ *
+ * written or collected and sometimes rewritten by
+ * Magnus Damm <damm@bitsmart.com>
+ *
+ * minor modifications by
+ * Wolfgang Denk <wd@denx.de>
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc8xx.h>
+#include <commproc.h>
+#include <netdev.h>
+#include <asm/cache.h>
+#include <linux/compiler.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static char *cpu_warning = "\n " \
+ "*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
+
+#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \
+ !defined(CONFIG_MPC862))
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ char *id_str =
+# if defined(CONFIG_MPC855)
+ "PC855";
+# elif defined(CONFIG_MPC860P)
+ "PC860P";
+# else
+ NULL;
+# endif
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+ char pre = 'X';
+ char *mid = "xx";
+ char *suf;
+
+ /* the highest 16 bits should be 0x0050 for a 860 */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) |
+ immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
+ m = 0;
+ suf = "";
+
+ /*
+ * Some boards use sockets so different CPUs can be used.
+ * We have to check chip version in run time.
+ */
+ switch (k) {
+ case 0x00020001: pre = 'P'; break;
+ case 0x00030001: break;
+ case 0x00120003: suf = "A"; break;
+ case 0x00130003: suf = "A3"; break;
+
+ case 0x00200004: suf = "B"; break;
+
+ case 0x00300004: suf = "C"; break;
+ case 0x00310004: suf = "C1"; m = 1; break;
+
+ case 0x00200064: mid = "SR"; suf = "B"; break;
+ case 0x00300065: mid = "SR"; suf = "C"; break;
+ case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
+ case 0x05010000: suf = "D3"; m = 1; break;
+ case 0x05020000: suf = "D4"; m = 1; break;
+ /* this value is not documented anywhere */
+ case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
+ /* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
+ case 0x08010004: /* Rev. A.0 */
+ suf = "A";
+ /* fall through */
+ case 0x08000003: /* Rev. 0.3 */
+ pre = 'M'; m = 1;
+ if (id_str == NULL)
+ id_str =
+# if defined(CONFIG_MPC852T)
+ "PC852T";
+# elif defined(CONFIG_MPC859T)
+ "PC859T";
+# elif defined(CONFIG_MPC859DSL)
+ "PC859DSL";
+# elif defined(CONFIG_MPC866T)
+ "PC866T";
+# else
+ "PC866x"; /* Unknown chip from MPC866 family */
+# endif
+ break;
+ case 0x09000000: pre = 'M'; mid = suf = ""; m = 1;
+ if (id_str == NULL)
+ id_str = "PC885"; /* 870/875/880/885 */
+ break;
+
+ default: suf = NULL; break;
+ }
+
+ if (id_str == NULL)
+ id_str = "PC86x"; /* Unknown 86x chip */
+ if (suf)
+ printf ("%c%s%sZPnn%s", pre, id_str, mid, suf);
+ else
+ printf ("unknown M%s (0x%08x)", id_str, k);
+
+
+#if defined(CONFIG_SYS_8xx_CPUCLK_MIN) && defined(CONFIG_SYS_8xx_CPUCLK_MAX)
+ printf (" at %s MHz [%d.%d...%d.%d MHz]\n ",
+ strmhz (buf, clock),
+ CONFIG_SYS_8xx_CPUCLK_MIN / 1000000,
+ ((CONFIG_SYS_8xx_CPUCLK_MIN % 1000000) + 50000) / 100000,
+ CONFIG_SYS_8xx_CPUCLK_MAX / 1000000,
+ ((CONFIG_SYS_8xx_CPUCLK_MAX % 1000000) + 50000) / 100000
+ );
+#else
+ printf (" at %s MHz: ", strmhz (buf, clock));
+#endif
+ print_size(checkicache(), " I-Cache ");
+ print_size(checkdcache(), " D-Cache");
+
+ /* do we have a FEC (860T/P or 852/859/866/885)? */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ printf (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+#ifdef DEBUG
+ if(clock != measure_gclk()) {
+ printf ("clock %ldHz != %dHz\n", clock, measure_gclk());
+ }
+#endif
+
+ return 0;
+}
+
+#elif defined(CONFIG_MPC862)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+ char pre = 'X';
+ __maybe_unused char *mid = "xx";
+ char *suf;
+
+ /* the highest 16 bits should be 0x0050 for a 8xx */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) |
+ immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
+ m = 0;
+
+ switch (k) {
+
+ /* this value is not documented anywhere */
+ case 0x06000000: mid = "P"; suf = "0"; break;
+ case 0x06010001: mid = "P"; suf = "A"; m = 1; break;
+ case 0x07000003: mid = "P"; suf = "B"; m = 1; break;
+ default: suf = NULL; break;
+ }
+
+#ifndef CONFIG_MPC857
+ if (suf)
+ printf ("%cPC862%sZPnn%s", pre, mid, suf);
+ else
+ printf ("unknown MPC862 (0x%08x)", k);
+#else
+ if (suf)
+ printf ("%cPC857TZPnn%s", pre, suf); /* only 857T tested right now! */
+ else
+ printf ("unknown MPC857 (0x%08x)", k);
+#endif
+
+ printf(" at %s MHz: ", strmhz(buf, clock));
+
+ print_size(checkicache(), " I-Cache ");
+ print_size(checkdcache(), " D-Cache");
+
+ /* lets check and see if we're running on a 862T (or P?) */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ printf (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+
+#elif defined(CONFIG_MPC823)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+ char *suf;
+
+ /* the highest 16 bits should be 0x0050 for a 8xx */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) |
+ in_be16(&immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)]);
+ m = 0;
+
+ switch (k) {
+ /* MPC823 */
+ case 0x20000000: suf = "0"; break;
+ case 0x20010000: suf = "0.1"; break;
+ case 0x20020000: suf = "Z2/3"; break;
+ case 0x20020001: suf = "Z3"; break;
+ case 0x21000000: suf = "A"; break;
+ case 0x21010000: suf = "B"; m = 1; break;
+ case 0x21010001: suf = "B2"; m = 1; break;
+ /* MPC823E */
+ case 0x24010000: suf = NULL;
+ puts ("PPC823EZTnnB2");
+ m = 1;
+ break;
+ default:
+ suf = NULL;
+ printf ("unknown MPC823 (0x%08x)", k);
+ break;
+ }
+ if (suf)
+ printf ("PPC823ZTnn%s", suf);
+
+ printf(" at %s MHz: ", strmhz(buf, clock));
+
+ print_size(checkicache(), " I-Cache ");
+ print_size(checkdcache(), " D-Cache");
+
+ /* lets check and see if we're running on a 860T (or P?) */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ puts (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+
+#elif defined(CONFIG_MPC850)
+
+static int check_CPU (long clock, uint pvr, uint immr)
+{
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint k, m;
+ char buf[32];
+
+ /* the highest 16 bits should be 0x0050 for a 8xx */
+
+ if ((pvr >> 16) != 0x0050)
+ return -1;
+
+ k = (immr << 16) |
+ immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
+ m = 0;
+
+ switch (k) {
+ case 0x20020001:
+ printf ("XPC850xxZT");
+ break;
+ case 0x21000065:
+ printf ("XPC850xxZTA");
+ break;
+ case 0x21010067:
+ printf ("XPC850xxZTB");
+ m = 1;
+ break;
+ case 0x21020068:
+ printf ("XPC850xxZTC");
+ m = 1;
+ break;
+ default:
+ printf ("unknown MPC850 (0x%08x)", k);
+ }
+ printf(" at %s MHz: ", strmhz(buf, clock));
+
+ print_size(checkicache(), " I-Cache ");
+ print_size(checkdcache(), " D-Cache");
+
+ /* lets check and see if we're running on a 850T (or P?) */
+
+ immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
+ if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
+ printf (" FEC present");
+ }
+
+ if (!m) {
+ puts (cpu_warning);
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+#else
+#error CPU undefined
+#endif
+/* ------------------------------------------------------------------------- */
+
+int checkcpu (void)
+{
+ ulong clock = gd->cpu_clk;
+ uint immr = get_immr (0); /* Return full IMMR contents */
+ uint pvr = get_pvr ();
+
+ puts ("CPU: ");
+
+ /* 850 has PARTNUM 20 */
+ /* 801 has PARTNUM 10 */
+ return check_CPU (clock, pvr, immr);
+}
+
+/* ------------------------------------------------------------------------- */
+/* L1 i-cache */
+/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
+/* the 860 P (plus) has 256 sets of 16 bytes in 4 ways (= 16 kB) */
+
+int checkicache (void)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ u32 cacheon = rd_ic_cst () & IDC_ENABLED;
+
+#ifdef CONFIG_IP86x
+ u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
+#else
+ u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
+#endif
+ u32 m;
+ u32 lines = -1;
+
+ wr_ic_cst (IDC_UNALL);
+ wr_ic_cst (IDC_INVALL);
+ wr_ic_cst (IDC_DISABLE);
+ __asm__ volatile ("isync");
+
+ while (!((m = rd_ic_cst ()) & IDC_CERR2)) {
+ wr_ic_adr (k);
+ wr_ic_cst (IDC_LDLCK);
+ __asm__ volatile ("isync");
+
+ lines++;
+ k += 0x10; /* the number of bytes in a cacheline */
+ }
+
+ wr_ic_cst (IDC_UNALL);
+ wr_ic_cst (IDC_INVALL);
+
+ if (cacheon)
+ wr_ic_cst (IDC_ENABLE);
+ else
+ wr_ic_cst (IDC_DISABLE);
+
+ __asm__ volatile ("isync");
+
+ return lines << 4;
+};
+
+/* ------------------------------------------------------------------------- */
+/* L1 d-cache */
+/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
+/* the 860 P (plus) has 256 sets of 16 bytes in 2 ways (= 8 kB) */
+/* call with cache disabled */
+
+int checkdcache (void)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ u32 cacheon = rd_dc_cst () & IDC_ENABLED;
+
+#ifdef CONFIG_IP86x
+ u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
+#else
+ u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
+#endif
+ u32 m;
+ u32 lines = -1;
+
+ wr_dc_cst (IDC_UNALL);
+ wr_dc_cst (IDC_INVALL);
+ wr_dc_cst (IDC_DISABLE);
+
+ while (!((m = rd_dc_cst ()) & IDC_CERR2)) {
+ wr_dc_adr (k);
+ wr_dc_cst (IDC_LDLCK);
+ lines++;
+ k += 0x10; /* the number of bytes in a cacheline */
+ }
+
+ wr_dc_cst (IDC_UNALL);
+ wr_dc_cst (IDC_INVALL);
+
+ if (cacheon)
+ wr_dc_cst (IDC_ENABLE);
+ else
+ wr_dc_cst (IDC_DISABLE);
+
+ return lines << 4;
+};
+
+/* ------------------------------------------------------------------------- */
+
+void upmconfig (uint upm, uint * table, uint size)
+{
+ uint i;
+ uint addr = 0;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ for (i = 0; i < size; i++) {
+ memctl->memc_mdr = table[i]; /* (16-15) */
+ memctl->memc_mcr = addr | upm; /* (16-16) */
+ addr++;
+ }
+}
+
+/* ------------------------------------------------------------------------- */
+
+#ifndef CONFIG_LWMON
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ ulong msr, addr;
+
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+
+ immap->im_clkrst.car_plprcr |= PLPRCR_CSR; /* Checkstop Reset enable */
+
+ /* Interrupts and MMU off */
+ __asm__ volatile ("mtspr 81, 0");
+ __asm__ volatile ("mfmsr %0":"=r" (msr));
+
+ msr &= ~0x1030;
+ __asm__ volatile ("mtmsr %0"::"r" (msr));
+
+ /*
+ * Trying to execute the next instruction at a non-existing address
+ * should cause a machine check, resulting in reset
+ */
+#ifdef CONFIG_SYS_RESET_ADDRESS
+ addr = CONFIG_SYS_RESET_ADDRESS;
+#else
+ /*
+ * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
+ * - sizeof (ulong) is usually a valid address. Better pick an address
+ * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
+ * "(ulong)-1" used to be a good choice for many systems...
+ */
+ addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
+#endif
+ ((void (*)(void)) addr) ();
+ return 1;
+}
+
+#else /* CONFIG_LWMON */
+
+/*
+ * On the LWMON board, the MCLR reset input of the PIC's on the board
+ * uses a 47K/1n RC combination which has a 47us time constant. The
+ * low signal on the HRESET pin of the CPU is only 512 clocks = 8 us
+ * and thus too short to reset the external hardware. So we use the
+ * watchdog to reset the board.
+ */
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ /* prevent triggering the watchdog */
+ disable_interrupts ();
+
+ /* make sure the watchdog is running */
+ reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
+
+ /* wait for watchdog reset */
+ while (1) {};
+
+ /* NOTREACHED */
+ return 1;
+}
+
+#endif /* CONFIG_LWMON */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ *
+ * See sections 14.2 and 14.6 of the User's Manual
+ */
+unsigned long get_tbclk (void)
+{
+ uint immr = get_immr (0); /* Return full IMMR contents */
+ volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000);
+ ulong oscclk, factor, pll;
+
+ if (immap->im_clkrst.car_sccr & SCCR_TBS) {
+ return (gd->cpu_clk / 16);
+ }
+
+ pll = immap->im_clkrst.car_plprcr;
+
+#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
+
+ /*
+ * For newer PQ1 chips (MPC866/87x/88x families), PLL multiplication
+ * factor is calculated as follows:
+ *
+ * MFN
+ * MFI + -------
+ * MFD + 1
+ * factor = -----------------
+ * (PDF + 1) * 2^S
+ *
+ * For older chips, it's just MF field of PLPRCR plus one.
+ */
+ if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
+ factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
+ (PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
+ } else {
+ factor = PLPRCR_val(MF)+1;
+ }
+
+ oscclk = gd->cpu_clk / factor;
+
+ if ((immap->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
+ return (oscclk / 4);
+ }
+ return (oscclk / 16);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+ int re_enable = disable_interrupts ();
+
+ reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
+ if (re_enable)
+ enable_interrupts ();
+}
+#endif /* CONFIG_WATCHDOG */
+
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_LWMON)
+
+void reset_8xx_watchdog (volatile immap_t * immr)
+{
+# if defined(CONFIG_LWMON)
+ /*
+ * The LWMON board uses a MAX6301 Watchdog
+ * with the trigger pin connected to port PA.7
+ *
+ * (The old board version used a MAX706TESA Watchdog, which
+ * had to be handled exactly the same.)
+ */
+# define WATCHDOG_BIT 0x0100
+ immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */
+ immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */
+ immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */
+
+ immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */
+# elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
+ /*
+ * The KUP4 boards uses a TPS3705 Watchdog
+ * with the trigger pin connected to port PA.5
+ */
+# define WATCHDOG_BIT 0x0400
+ immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */
+ immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */
+ immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */
+
+ immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */
+# else
+ /*
+ * All other boards use the MPC8xx Internal Watchdog
+ */
+ immr->im_siu_conf.sc_swsr = 0x556c; /* write magic1 */
+ immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */
+# endif /* CONFIG_LWMON */
+}
+#endif /* CONFIG_WATCHDOG */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(SCC_ENET) && defined(CONFIG_CMD_NET)
+ scc_initialize(bis);
+#endif
+#if defined(FEC_ENET)
+ fec_initialize(bis);
+#endif
+ return 0;
+}
Code Review / kvmfornfv.git / blobdiff