--- /dev/null
+/*
+ * Copyright 2004, 2007, 2011 Freescale Semiconductor.
+ * Srikanth Srinivasan <srikanth.srinivaan@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* U-Boot - Startup Code for 86xx PowerPC based Embedded Boards
+ *
+ *
+ * The processor starts at 0xfff00100 and the code is executed
+ * from flash. The code is organized to be at an other address
+ * in memory, but as long we don't jump around before relocating.
+ * board_init lies at a quite high address and when the cpu has
+ * jumped there, everything is ok.
+ */
+#include <asm-offsets.h>
+#include <config.h>
+#include <mpc86xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <asm/u-boot.h>
+
+/*
+ * Need MSR_DR | MSR_IR enabled to access I/O (printf) in exceptions
+ */
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(__bss_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+ .text
+ .long 0x27051956 /* U-Boot Magic Number */
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION_STRING, "\0"
+
+ . = EXC_OFF_SYS_RESET
+ .globl _start
+_start:
+ b boot_cold
+
+ /* the boot code is located below the exception table */
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+ STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
+ STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
+ STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
+ STD_EXCEPTION(0x1500, Reserved5, UnknownException)
+ STD_EXCEPTION(0x1600, Reserved6, UnknownException)
+ STD_EXCEPTION(0x1700, Reserved7, UnknownException)
+ STD_EXCEPTION(0x1800, Reserved8, UnknownException)
+ STD_EXCEPTION(0x1900, Reserved9, UnknownException)
+ STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
+ STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
+ STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+ . = 0x2000
+
+boot_cold:
+ /*
+ * NOTE: Only Cpu 0 will ever come here. Other cores go to an
+ * address specified by the BPTR
+ */
+1:
+#ifdef CONFIG_SYS_RAMBOOT
+ /* disable everything */
+ li r0, 0
+ mtspr HID0, r0
+ sync
+ mtmsr 0
+#endif
+
+ /* Invalidate BATs */
+ bl invalidate_bats
+ sync
+ /* Invalidate all of TLB before MMU turn on */
+ bl clear_tlbs
+ sync
+
+#ifdef CONFIG_SYS_L2
+ /* init the L2 cache */
+ lis r3, L2_INIT@h
+ ori r3, r3, L2_INIT@l
+ mtspr l2cr, r3
+ /* invalidate the L2 cache */
+ bl l2cache_invalidate
+ sync
+#endif
+
+ /*
+ * Calculate absolute address in FLASH and jump there
+ *------------------------------------------------------*/
+ lis r3, CONFIG_SYS_MONITOR_BASE_EARLY@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE_EARLY@l
+ addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
+ mtlr r3
+ blr
+
+in_flash:
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable ! */
+ /*------------------------------------------------------*/
+ /* perform low-level init */
+
+ /* enable extended addressing */
+ bl enable_ext_addr
+
+ /* setup the bats */
+ bl early_bats
+
+ /*
+ * Cache must be enabled here for stack-in-cache trick.
+ * This means we need to enable the BATS.
+ * Cache should be turned on after BATs, since by default
+ * everything is write-through.
+ */
+
+ /* enable address translation */
+ mfmsr r5
+ ori r5, r5, (MSR_IR | MSR_DR)
+ lis r3,addr_trans_enabled@h
+ ori r3, r3, addr_trans_enabled@l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r5
+ rfi
+
+addr_trans_enabled:
+ /* enable and invalidate the data cache */
+/* bl l1dcache_enable */
+ bl dcache_enable
+ sync
+
+#if 1
+ bl icache_enable
+#endif
+
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+ bl lock_ram_in_cache
+ sync
+#endif
+
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+ bl setup_ccsrbar
+#endif
+
+ /* set up the stack pointer in our newly created
+ * cache-ram (r1) */
+ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+ ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ GET_GOT /* initialize GOT access */
+
+ /* run low-level CPU init code (from Flash) */
+ bl cpu_init_f
+ sync
+
+#ifdef RUN_DIAG
+
+ /* Load PX_AUX register address in r4 */
+ lis r4, PIXIS_BASE@h
+ ori r4, r4, 0x6
+ /* Load contents of PX_AUX in r3 bits 24 to 31*/
+ lbz r3, 0(r4)
+
+ /* Mask and obtain the bit in r3 */
+ rlwinm. r3, r3, 0, 24, 24
+ /* If not zero, jump and continue with u-boot */
+ bne diag_done
+
+ /* Load back contents of PX_AUX in r3 bits 24 to 31 */
+ lbz r3, 0(r4)
+ /* Set the MSB of the register value */
+ ori r3, r3, 0x80
+ /* Write value in r3 back to PX_AUX */
+ stb r3, 0(r4)
+
+ /* Get the address to jump to in r3*/
+ lis r3, CONFIG_SYS_DIAG_ADDR@h
+ ori r3, r3, CONFIG_SYS_DIAG_ADDR@l
+
+ /* Load the LR with the branch address */
+ mtlr r3
+
+ /* Branch to diagnostic */
+ blr
+
+diag_done:
+#endif
+
+/* bl l2cache_enable */
+
+ /* run 1st part of board init code (from Flash) */
+ li r3, 0 /* clear boot_flag for calling board_init_f */
+ bl board_init_f
+ sync
+
+ /* NOTREACHED - board_init_f() does not return */
+
+ .globl invalidate_bats
+invalidate_bats:
+
+ li r0, 0
+ /* invalidate BATs */
+ mtspr IBAT0U, r0
+ mtspr IBAT1U, r0
+ mtspr IBAT2U, r0
+ mtspr IBAT3U, r0
+ mtspr IBAT4U, r0
+ mtspr IBAT5U, r0
+ mtspr IBAT6U, r0
+ mtspr IBAT7U, r0
+
+ isync
+ mtspr DBAT0U, r0
+ mtspr DBAT1U, r0
+ mtspr DBAT2U, r0
+ mtspr DBAT3U, r0
+ mtspr DBAT4U, r0
+ mtspr DBAT5U, r0
+ mtspr DBAT6U, r0
+ mtspr DBAT7U, r0
+
+ isync
+ sync
+ blr
+
+#define CONFIG_BAT_PAIR(n) \
+ lis r4, CONFIG_SYS_IBAT##n##L@h; \
+ ori r4, r4, CONFIG_SYS_IBAT##n##L@l; \
+ lis r3, CONFIG_SYS_IBAT##n##U@h; \
+ ori r3, r3, CONFIG_SYS_IBAT##n##U@l; \
+ mtspr IBAT##n##L, r4; \
+ mtspr IBAT##n##U, r3; \
+ lis r4, CONFIG_SYS_DBAT##n##L@h; \
+ ori r4, r4, CONFIG_SYS_DBAT##n##L@l; \
+ lis r3, CONFIG_SYS_DBAT##n##U@h; \
+ ori r3, r3, CONFIG_SYS_DBAT##n##U@l; \
+ mtspr DBAT##n##L, r4; \
+ mtspr DBAT##n##U, r3;
+
+/*
+ * setup_bats:
+ *
+ * Set up the final BAT registers now that setup is done.
+ *
+ * Assumes that:
+ * 1) Address translation is enabled upon entry
+ * 2) The boot rom is still accessible via 1:1 translation
+ */
+ .globl setup_bats
+setup_bats:
+ mflr r5
+ sync
+
+ /*
+ * When we disable address translation, we will get 1:1 (VA==PA)
+ * translation. The only place we know for sure is safe for that is
+ * the bootrom where we originally started out. Pop back into there.
+ */
+ lis r4, CONFIG_SYS_MONITOR_BASE_EARLY@h
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE_EARLY@l
+ addi r4, r4, trans_disabled - _start + EXC_OFF_SYS_RESET
+
+ /* disable address translation */
+ mfmsr r3
+ rlwinm r3, r3, 0, 28, 25
+ mtspr SRR0, r4
+ mtspr SRR1, r3
+ rfi
+
+trans_disabled:
+#if defined(CONFIG_SYS_DBAT0U) && defined(CONFIG_SYS_DBAT0L) \
+ && defined(CONFIG_SYS_IBAT0U) && defined(CONFIG_SYS_IBAT0L)
+ CONFIG_BAT_PAIR(0)
+#endif
+ CONFIG_BAT_PAIR(1)
+ CONFIG_BAT_PAIR(2)
+ CONFIG_BAT_PAIR(3)
+ CONFIG_BAT_PAIR(4)
+ CONFIG_BAT_PAIR(5)
+ CONFIG_BAT_PAIR(6)
+ CONFIG_BAT_PAIR(7)
+
+ sync
+ isync
+
+ /* Turn translation back on and return */
+ mfmsr r3
+ ori r3, r3, (MSR_IR | MSR_DR)
+ mtspr SPRN_SRR0,r5
+ mtspr SPRN_SRR1,r3
+ rfi
+
+/*
+ * early_bats:
+ *
+ * Set up bats needed early on - this is usually the BAT for the
+ * stack-in-cache, the Flash, and CCSR space
+ */
+ .globl early_bats
+early_bats:
+ /* IBAT 3 */
+ lis r4, CONFIG_SYS_IBAT3L@h
+ ori r4, r4, CONFIG_SYS_IBAT3L@l
+ lis r3, CONFIG_SYS_IBAT3U@h
+ ori r3, r3, CONFIG_SYS_IBAT3U@l
+ mtspr IBAT3L, r4
+ mtspr IBAT3U, r3
+ isync
+
+ /* DBAT 3 */
+ lis r4, CONFIG_SYS_DBAT3L@h
+ ori r4, r4, CONFIG_SYS_DBAT3L@l
+ lis r3, CONFIG_SYS_DBAT3U@h
+ ori r3, r3, CONFIG_SYS_DBAT3U@l
+ mtspr DBAT3L, r4
+ mtspr DBAT3U, r3
+ isync
+
+ /* IBAT 5 */
+ lis r4, CONFIG_SYS_IBAT5L@h
+ ori r4, r4, CONFIG_SYS_IBAT5L@l
+ lis r3, CONFIG_SYS_IBAT5U@h
+ ori r3, r3, CONFIG_SYS_IBAT5U@l
+ mtspr IBAT5L, r4
+ mtspr IBAT5U, r3
+ isync
+
+ /* DBAT 5 */
+ lis r4, CONFIG_SYS_DBAT5L@h
+ ori r4, r4, CONFIG_SYS_DBAT5L@l
+ lis r3, CONFIG_SYS_DBAT5U@h
+ ori r3, r3, CONFIG_SYS_DBAT5U@l
+ mtspr DBAT5L, r4
+ mtspr DBAT5U, r3
+ isync
+
+ /* IBAT 6 */
+ lis r4, CONFIG_SYS_IBAT6L_EARLY@h
+ ori r4, r4, CONFIG_SYS_IBAT6L_EARLY@l
+ lis r3, CONFIG_SYS_IBAT6U_EARLY@h
+ ori r3, r3, CONFIG_SYS_IBAT6U_EARLY@l
+ mtspr IBAT6L, r4
+ mtspr IBAT6U, r3
+ isync
+
+ /* DBAT 6 */
+ lis r4, CONFIG_SYS_DBAT6L_EARLY@h
+ ori r4, r4, CONFIG_SYS_DBAT6L_EARLY@l
+ lis r3, CONFIG_SYS_DBAT6U_EARLY@h
+ ori r3, r3, CONFIG_SYS_DBAT6U_EARLY@l
+ mtspr DBAT6L, r4
+ mtspr DBAT6U, r3
+ isync
+
+#if(CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+ /* IBAT 7 */
+ lis r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@h
+ ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@l
+ lis r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@h
+ ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@l
+ mtspr IBAT7L, r4
+ mtspr IBAT7U, r3
+ isync
+
+ /* DBAT 7 */
+ lis r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@h
+ ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@l
+ lis r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@h
+ ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@l
+ mtspr DBAT7L, r4
+ mtspr DBAT7U, r3
+ isync
+#endif
+ blr
+
+ .globl clear_tlbs
+clear_tlbs:
+ addis r3, 0, 0x0000
+ addis r5, 0, 0x4
+ isync
+tlblp:
+ tlbie r3
+ sync
+ addi r3, r3, 0x1000
+ cmp 0, 0, r3, r5
+ blt tlblp
+ blr
+
+ .globl disable_addr_trans
+disable_addr_trans:
+ /* disable address translation */
+ mflr r4
+ mfmsr r3
+ andi. r0, r3, (MSR_IR | MSR_DR)
+ beqlr
+ andc r3, r3, r0
+ mtspr SRR0, r4
+ mtspr SRR1, r3
+ rfi
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ mtspr SPRG2,r22 /* r1 is now kernel sp */
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+ .globl dc_read
+dc_read:
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+ .globl get_svr
+get_svr:
+ mfspr r3, SVR
+ blr
+
+
+/*
+ * Function: in8
+ * Description: Input 8 bits
+ */
+ .globl in8
+in8:
+ lbz r3,0x0000(r3)
+ blr
+
+/*
+ * Function: out8
+ * Description: Output 8 bits
+ */
+ .globl out8
+out8:
+ stb r4,0x0000(r3)
+ blr
+
+/*
+ * Function: out16
+ * Description: Output 16 bits
+ */
+ .globl out16
+out16:
+ sth r4,0x0000(r3)
+ blr
+
+/*
+ * Function: out16r
+ * Description: Byte reverse and output 16 bits
+ */
+ .globl out16r
+out16r:
+ sthbrx r4,r0,r3
+ blr
+
+/*
+ * Function: out32
+ * Description: Output 32 bits
+ */
+ .globl out32
+out32:
+ stw r4,0x0000(r3)
+ blr
+
+/*
+ * Function: out32r
+ * Description: Byte reverse and output 32 bits
+ */
+ .globl out32r
+out32r:
+ stwbrx r4,r0,r3
+ blr
+
+/*
+ * Function: in16
+ * Description: Input 16 bits
+ */
+ .globl in16
+in16:
+ lhz r3,0x0000(r3)
+ blr
+
+/*
+ * Function: in16r
+ * Description: Input 16 bits and byte reverse
+ */
+ .globl in16r
+in16r:
+ lhbrx r3,r0,r3
+ blr
+
+/*
+ * Function: in32
+ * Description: Input 32 bits
+ */
+ .globl in32
+in32:
+ lwz 3,0x0000(3)
+ blr
+
+/*
+ * Function: in32r
+ * Description: Input 32 bits and byte reverse
+ */
+ .globl in32r
+in32r:
+ lwbrx r3,r0,r3
+ blr
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ cmpwi r0,0
+ add r0,r0,r11
+ stw r4,0(r3)
+ beq- 5f
+ stw r0,0(r4)
+5: bdnz 3b
+4:
+/* clear_bss: */
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(__bss_end)
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+ mr r3, r9 /* Init Date pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /* not reached - end relocate_code */
+/*-----------------------------------------------------------------------*/
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ /* enable execptions from RAM vectors */
+ mfmsr r7
+ li r8,MSR_IP
+ andc r7,r7,r8
+ ori r7,r7,MSR_ME /* Enable Machine Check */
+ mtmsr r7
+
+ mtlr r4 /* restore link register */
+ blr
+
+.globl enable_ext_addr
+enable_ext_addr:
+ mfspr r0, HID0
+ lis r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h
+ ori r0, r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@l
+ mtspr HID0, r0
+ sync
+ isync
+ blr
+
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+.globl setup_ccsrbar
+setup_ccsrbar:
+ /* Special sequence needed to update CCSRBAR itself */
+ lis r4, CONFIG_SYS_CCSRBAR_DEFAULT@h
+ ori r4, r4, CONFIG_SYS_CCSRBAR_DEFAULT@l
+
+ lis r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@h
+ ori r5, r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@l
+ srwi r5,r5,12
+ li r6, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+ rlwimi r5,r6,20,8,11
+ stw r5, 0(r4) /* Store physical value of CCSR */
+ isync
+
+ lis r5, CONFIG_SYS_TEXT_BASE@h
+ ori r5,r5,CONFIG_SYS_TEXT_BASE@l
+ lwz r5, 0(r5)
+ isync
+
+ /* Use VA of CCSR to do read */
+ lis r3, CONFIG_SYS_CCSRBAR@h
+ lwz r5, CONFIG_SYS_CCSRBAR@l(r3)
+ isync
+
+ blr
+#endif
+
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+lock_ram_in_cache:
+ /* Allocate Initial RAM in data cache.
+ */
+ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+ li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
+ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+ mtctr r4
+1:
+ dcbz r0, r3
+ addi r3, r3, 32
+ bdnz 1b
+#if 1
+/* Lock the data cache */
+ mfspr r0, HID0
+ ori r0, r0, 0x1000
+ sync
+ mtspr HID0, r0
+ sync
+ blr
+#endif
+#if 0
+ /* Lock the first way of the data cache */
+ mfspr r0, LDSTCR
+ ori r0, r0, 0x0080
+#if defined(CONFIG_ALTIVEC)
+ dssall
+#endif
+ sync
+ mtspr LDSTCR, r0
+ sync
+ isync
+ blr
+#endif
+
+.globl unlock_ram_in_cache
+unlock_ram_in_cache:
+ /* invalidate the INIT_RAM section */
+ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+ li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
+ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+ mtctr r4
+1: icbi r0, r3
+ addi r3, r3, 32
+ bdnz 1b
+ sync /* Wait for all icbi to complete on bus */
+ isync
+#if 1
+/* Unlock the data cache and invalidate it */
+ mfspr r0, HID0
+ li r3,0x1000
+ andc r0,r0,r3
+ li r3,0x0400
+ or r0,r0,r3
+ sync
+ mtspr HID0, r0
+ sync
+ blr
+#endif
+#if 0
+ /* Unlock the first way of the data cache */
+ mfspr r0, LDSTCR
+ li r3,0x0080
+ andc r0,r0,r3
+#ifdef CONFIG_ALTIVEC
+ dssall
+#endif
+ sync
+ mtspr LDSTCR, r0
+ sync
+ isync
+ li r3,0x0400
+ or r0,r0,r3
+ sync
+ mtspr HID0, r0
+ sync
+ blr
+#endif
+#endif
Code Review / kvmfornfv.git / blobdiff