--- /dev/null
+/*
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * CPU specific code for the MPC825x / MPC826x / MPC827x / MPC828x
+ *
+ * written or collected and sometimes rewritten by
+ * Magnus Damm <damm@bitsmart.com>
+ *
+ * modified by
+ * Wolfgang Denk <wd@denx.de>
+ *
+ * modified for 8260 by
+ * Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * added 8260 masks by
+ * Marius Groeger <mag@sysgo.de>
+ *
+ * added HiP7 (824x/827x/8280) processors support by
+ * Yuli Barcohen <yuli@arabellasw.com>
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc8260.h>
+#include <netdev.h>
+#include <asm/processor.h>
+#include <asm/cpm_8260.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_GET_CPU_STR_F)
+extern int get_cpu_str_f (char *buf);
+#endif
+
+int checkcpu (void)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ ulong clock = gd->cpu_clk;
+ uint pvr = get_pvr ();
+ uint immr, rev, m, k;
+ char buf[32];
+
+ puts ("CPU: ");
+
+ switch (pvr) {
+ case PVR_8260:
+ case PVR_8260_HIP3:
+ k = 3;
+ break;
+ case PVR_8260_HIP4:
+ k = 4;
+ break;
+ case PVR_8260_HIP7R1:
+ case PVR_8260_HIP7RA:
+ case PVR_8260_HIP7:
+ k = 7;
+ break;
+ default:
+ return -1; /* whoops! not an MPC8260 */
+ }
+ rev = pvr & 0xff;
+
+ immr = immap->im_memctl.memc_immr;
+ if ((immr & IMMR_ISB_MSK) != CONFIG_SYS_IMMR)
+ return -1; /* whoops! someone moved the IMMR */
+
+#if defined(CONFIG_GET_CPU_STR_F)
+ get_cpu_str_f (buf);
+ printf ("%s (HiP%d Rev %02x, Mask ", buf, k, rev);
+#else
+ printf (CPU_ID_STR " (HiP%d Rev %02x, Mask ", k, rev);
+#endif
+
+ /*
+ * the bottom 16 bits of the immr are the Part Number and Mask Number
+ * (4-34); the 16 bits at PROFF_REVNUM (0x8af0) in dual port ram is the
+ * RISC Microcode Revision Number (13-10).
+ * For the 8260, Motorola doesn't include the Microcode Revision
+ * in the mask.
+ */
+ m = immr & (IMMR_PARTNUM_MSK | IMMR_MASKNUM_MSK);
+ k = immap->im_dprambase16[PROFF_REVNUM / sizeof(u16)];
+
+ switch (m) {
+ case 0x0000:
+ puts ("0.2 2J24M");
+ break;
+ case 0x0010:
+ puts ("A.0 K22A");
+ break;
+ case 0x0011:
+ puts ("A.1 1K22A-XC");
+ break;
+ case 0x0001:
+ puts ("B.1 1K23A");
+ break;
+ case 0x0021:
+ puts ("B.2 2K23A-XC");
+ break;
+ case 0x0023:
+ puts ("B.3 3K23A");
+ break;
+ case 0x0024:
+ puts ("C.2 6K23A");
+ break;
+ case 0x0060:
+ puts ("A.0(A) 2K25A");
+ break;
+ case 0x0062:
+ puts ("B.1 4K25A");
+ break;
+ case 0x0064:
+ puts ("C.0 5K25A");
+ break;
+ case 0x0A00:
+ puts ("0.0 0K49M");
+ break;
+ case 0x0A01:
+ puts ("0.1 1K49M");
+ break;
+ case 0x0A10:
+ puts ("1.0 1K49M");
+ break;
+ case 0x0C00:
+ puts ("0.0 0K50M");
+ break;
+ case 0x0C10:
+ puts ("1.0 1K50M");
+ break;
+ case 0x0D00:
+ puts ("0.0 0K50M");
+ break;
+ case 0x0D10:
+ puts ("1.0 1K50M");
+ break;
+ default:
+ printf ("unknown [immr=0x%04x,k=0x%04x]", m, k);
+ break;
+ }
+
+ printf (") at %s MHz\n", strmhz (buf, clock));
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+/* configures a UPM by writing into the UPM RAM array */
+/* uses bank 11 and a dummy physical address (=BRx_BA_MSK) */
+/* NOTE: the physical address chosen must not overlap into any other area */
+/* mapped by the memory controller because bank 11 has the lowest priority */
+
+void upmconfig (uint upm, uint * table, uint size)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ volatile uchar *dummy = (uchar *) BRx_BA_MSK; /* set all BA bits */
+ uint i;
+
+ /* first set up bank 11 to reference the correct UPM at a dummy address */
+
+ memctl->memc_or11 = ORxU_AM_MSK; /* set all AM bits */
+
+ switch (upm) {
+
+ case UPMA:
+ memctl->memc_br11 =
+ ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMA |
+ BRx_V;
+ memctl->memc_mamr = MxMR_OP_WARR;
+ break;
+
+ case UPMB:
+ memctl->memc_br11 =
+ ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMB |
+ BRx_V;
+ memctl->memc_mbmr = MxMR_OP_WARR;
+ break;
+
+ case UPMC:
+ memctl->memc_br11 =
+ ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMC |
+ BRx_V;
+ memctl->memc_mcmr = MxMR_OP_WARR;
+ break;
+
+ default:
+ panic ("upmconfig passed invalid UPM number (%u)\n", upm);
+ break;
+
+ }
+
+ /*
+ * at this point, the dummy address is set up to access the selected UPM,
+ * the MAD pointer is zero, and the MxMR OP is set for writing to RAM
+ *
+ * now we simply load the mdr with each word and poke the dummy address.
+ * the MAD is incremented on each access.
+ */
+
+ for (i = 0; i < size; i++) {
+ memctl->memc_mdr = table[i];
+ *dummy = 0;
+ }
+
+ /* now kill bank 11 */
+ memctl->memc_br11 = 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if !defined(CONFIG_HAVE_OWN_RESET)
+int
+do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+{
+ ulong msr, addr;
+
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+
+ immap->im_clkrst.car_rmr = RMR_CSRE; /* Checkstop Reset enable */
+
+ /* Interrupts and MMU off */
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+ msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+
+ /*
+ * Trying to execute the next instruction at a non-existing address
+ * should cause a machine check, resulting in reset
+ */
+#ifdef CONFIG_SYS_RESET_ADDRESS
+ addr = CONFIG_SYS_RESET_ADDRESS;
+#else
+ /*
+ * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
+ * - sizeof (ulong) is usually a valid address. Better pick an address
+ * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
+ */
+ addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
+#endif
+ ((void (*)(void)) addr) ();
+ return 1;
+
+}
+#endif /* CONFIG_HAVE_OWN_RESET */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ *
+ */
+unsigned long get_tbclk (void)
+{
+ ulong tbclk;
+
+ tbclk = (gd->bus_clk + 3L) / 4L;
+
+ return (tbclk);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+ int re_enable = disable_interrupts ();
+
+ reset_8260_watchdog ((immap_t *) CONFIG_SYS_IMMR);
+ if (re_enable)
+ enable_interrupts ();
+}
+#endif /* CONFIG_WATCHDOG */
+
+/* ------------------------------------------------------------------------- */
+#if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
+void ft_cpu_setup (void *blob, bd_t *bd)
+{
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
+ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+ fdt_fixup_ethernet(blob);
+#endif
+
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
+ "clock-frequency", bd->bi_brgfreq, 1);
+
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", OF_TBCLK, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", bd->bi_intfreq, 1);
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
+#endif /* CONFIG_OF_LIBFDT */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_ETHER_ON_FCC)
+ fec_initialize(bis);
+#endif
+#if defined(CONFIG_ETHER_ON_SCC)
+ mpc82xx_scc_enet_initialize(bis);
+#endif
+ return 0;
+}
Code Review / kvmfornfv.git / blobdiff