Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / arch / nds32 / include / asm / arch-ag101 / ag101.h

diff --git a/qemu/roms/u-boot/arch/nds32/include/asm/arch-ag101/ag101.h b/qemu/roms/u-boot/arch/nds32/include/asm/arch-ag101/ag101.h
new file mode 100644 (file)
index 0000000..490f28b
--- /dev/null
+++ b/qemu/roms/u-boot/arch/nds32/include/asm/arch-ag101/ag101.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Nobuhiro Lin, Andes Technology Corporation <nobuhiro@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __AG101_H
+#define __AG101_H
+
+/* Hardware register bases */
+
+/* AHB Controller */
+#define CONFIG_FTAHBC020S_BASE         0x90100000
+/* Static Memory Controller (SRAM) */
+#define CONFIG_FTSMC020_BASE           0x90200000
+/* FTSDMC021 SDRAM Controller */
+#define CONFIG_FTSDMC021_BASE          0x90300000
+/* DMA Controller */
+#define CONFIG_FTDMAC020_BASE          0x90400000
+/* AHB-to-APB Bridge */
+#define CONFIG_FTAPBBRG020S_01_BASE    0x90500000
+/* LCD Controller */
+#define CONFIG_FTLCDC100_BASE          0x90600000
+/* Reserved */
+#define CONFIG_RESERVED_01_BASE                0x90700000
+/* Reserved */
+#define CONFIG_RESERVED_02_BASE                0x90800000
+/* Ethernet */
+#define CONFIG_FTMAC100_BASE           0x90900000
+/* External USB host */
+#define CONFIG_EXT_USB_HOST_BASE       0x90A00000
+/* USB Device */
+#define CONFIG_USB_DEV_BASE            0x90B00000
+/* External AHB-to-PCI Bridge (FTPCI100 not exist in ag101) */
+#define CONFIG_EXT_AHBPCIBRG_BASE      0x90C00000
+/* Reserved */
+#define CONFIG_RESERVED_03_BASE                0x90D00000
+/* External AHB-to-APB Bridger (FTAPBBRG020S_02) */
+#define CONFIG_EXT_AHBAPBBRG_BASE      0x90E00000
+/* External AHB slave1 (LCD) */
+#define CONFIG_EXT_AHBSLAVE01_BASE     0x90F00000
+/* External AHB slave2 (FUSBH200) */
+#define CONFIG_EXT_AHBSLAVE02_BASE     0x92000000
+
+/* DEBUG LED */
+#define CONFIG_DEBUG_LED               0x902FFFFC
+
+/* APB Device definitions */
+
+/* Power Management Unit */
+#define CONFIG_FTPMU010_BASE           0x98100000
+/* BT UART 2/IrDA (UART 01 in Linux) */
+#define CONFIG_FTUART010_01_BASE       0x98300000
+/* Counter/Timers */
+#define CONFIG_FTTMR010_BASE           0x98400000
+/* Watchdog Timer */
+#define CONFIG_FTWDT010_BASE           0x98500000
+/* Real Time Clock */
+#define CONFIG_FTRTC010_BASE           0x98600000
+/* GPIO */
+#define CONFIG_FTGPIO010_BASE          0x98700000
+/* Interrupt Controller */
+#define CONFIG_FTINTC010_BASE          0x98800000
+/* I2C */
+#define CONFIG_FTIIC010_BASE           0x98A00000
+/* Reserved */
+#define CONFIG_RESERVED_04_BASE                0x98C00000
+/* Compat Flash Controller */
+#define CONFIG_FTCFC010_BASE           0x98D00000
+/* SD Controller */
+#define CONFIG_FTSDC010_BASE           0x98E00000
+
+/* Synchronous Serial Port Controller (SSP) I2S/AC97 */
+#define CONFIG_FTSSP010_02_BASE                0x99400000
+/* ST UART ? SSP 02 (UART 02 in Linux) */
+#define CONFIG_FTUART010_02_BASE       0x99600000
+
+/* The following address was not defined in Linux */
+
+/* FF UART 3 */
+#define CONFIG_FTUART010_03_BASE       0x98200000
+/* Synchronous Serial Port Controller (SSP) 01 */
+#define CONFIG_FTSSP010_01_BASE                0x98B00000
+/* IrDA */
+#define CONFIG_IRDA_BASE               0x98900000
+/* PWM - Pulse Width Modulator Controller */
+#define CONFIG_PMW_BASE                        0x99100000
+
+#endif /* __AG101_H */