Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / arch / blackfin / cpu / interrupts.c

diff --git a/qemu/roms/u-boot/arch/blackfin/cpu/interrupts.c b/qemu/roms/u-boot/arch/blackfin/cpu/interrupts.c
new file mode 100644 (file)
index 0000000..9189816
--- /dev/null
+++ b/qemu/roms/u-boot/arch/blackfin/cpu/interrupts.c
@@ -0,0 +1,154 @@
+/*
+ * U-boot - interrupts.c Interrupt related routines
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * This file is based on interrupts.c
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * Copyright 2003 Metrowerks/Motorola
+ * Copyright 2003 Bas Vermeulen <bas@buyways.nl>,
+ *                     BuyWays B.V. (www.buyways.nl)
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <watchdog.h>
+#include <asm/blackfin.h>
+#include "cpu.h"
+
+static ulong timestamp;
+static ulong last_time;
+static int int_flag;
+
+int irq_flags;                 /* needed by asm-blackfin/system.h */
+
+/* Functions just to satisfy the linker */
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On Blackfin it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+       return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On Blackfin it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+       ulong tbclk;
+
+       tbclk = CONFIG_SYS_HZ;
+       return tbclk;
+}
+
+void enable_interrupts(void)
+{
+       local_irq_restore(int_flag);
+}
+
+int disable_interrupts(void)
+{
+       local_irq_save(int_flag);
+       return 1;
+}
+
+void __udelay(unsigned long usec)
+{
+       unsigned long delay, start, stop;
+       unsigned long cclk;
+       cclk = (CONFIG_CCLK_HZ);
+
+       while (usec > 1) {
+               WATCHDOG_RESET();
+
+               /*
+                * how many clock ticks to delay?
+                *  - request(in useconds) * clock_ticks(Hz) / useconds/second
+                */
+               if (usec < 1000) {
+                       delay = (usec * (cclk / 244)) >> 12;
+                       usec = 0;
+               } else {
+                       delay = (1000 * (cclk / 244)) >> 12;
+                       usec -= 1000;
+               }
+
+               asm volatile (" %0 = CYCLES;" : "=r" (start));
+               do {
+                       asm volatile (" %0 = CYCLES; " : "=r" (stop));
+               } while (stop - start < delay);
+       }
+
+       return;
+}
+
+#define MAX_TIM_LOAD   0xFFFFFFFF
+int timer_init(void)
+{
+       bfin_write_TCNTL(0x1);
+       CSYNC();
+       bfin_write_TSCALE(0x0);
+       bfin_write_TCOUNT(MAX_TIM_LOAD);
+       bfin_write_TPERIOD(MAX_TIM_LOAD);
+       bfin_write_TCNTL(0x7);
+       CSYNC();
+
+       timestamp = 0;
+       last_time = 0;
+
+       return 0;
+}
+
+/*
+ * Any network command or flash
+ * command is started get_timer shall
+ * be called before TCOUNT gets reset,
+ * to implement the accurate timeouts.
+ *
+ * How ever milliconds doesn't return
+ * the number that has been elapsed from
+ * the last reset.
+ *
+ * As get_timer is used in the u-boot
+ * only for timeouts this should be
+ * sufficient
+ */
+ulong get_timer(ulong base)
+{
+       ulong milisec;
+
+       /* Number of clocks elapsed */
+       ulong clocks = (MAX_TIM_LOAD - bfin_read_TCOUNT());
+
+       /*
+        * Find if the TCOUNT is reset
+        * timestamp gives the number of times
+        * TCOUNT got reset
+        */
+       if (clocks < last_time)
+               timestamp++;
+       last_time = clocks;
+
+       /* Get the number of milliseconds */
+       milisec = clocks / (CONFIG_CCLK_HZ / 1000);
+
+       /*
+        * Find the number of millisonds that
+        * got elapsed before this TCOUNT cycle
+        */
+       milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000));
+
+       return (milisec - base);
+}