Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / arch / arm / include / asm / arch-kirkwood / gpio.h

diff --git a/qemu/roms/u-boot/arch/arm/include/asm/arch-kirkwood/gpio.h b/qemu/roms/u-boot/arch/arm/include/asm/arch-kirkwood/gpio.h
new file mode 100644 (file)
index 0000000..5f4d786
--- /dev/null
+++ b/qemu/roms/u-boot/arch/arm/include/asm/arch-kirkwood/gpio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * Based on (mostly copied from) plat-orion based Linux 2.6 kernel driver.
+ * Removed kernel level irq handling. Took some macros from kernel to
+ * allow build.
+ *
+ * Dieter Kiermaier dk-arm-linux@gmx.de
+ */
+
+#ifndef __KIRKWOOD_GPIO_H
+#define __KIRKWOOD_GPIO_H
+
+/* got from kernel include/linux/bitops.h */
+#define BITS_PER_BYTE 8
+#define BITS_TO_LONGS(nr)      DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+
+#define GPIO_MAX               50
+#define GPIO_OFF(pin)          (((pin) >> 5) ? 0x0040 : 0x0000)
+#define GPIO_OUT(pin)          (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x00)
+#define GPIO_IO_CONF(pin)      (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x04)
+#define GPIO_BLINK_EN(pin)     (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x08)
+#define GPIO_IN_POL(pin)       (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x0c)
+#define GPIO_DATA_IN(pin)      (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin)   (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin)    (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin)   (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x1c)
+
+/*
+ * Kirkwood-specific GPIO API
+ */
+
+void kw_gpio_set_valid(unsigned pin, int mode);
+int kw_gpio_is_valid(unsigned pin, int mode);
+int kw_gpio_direction_input(unsigned pin);
+int kw_gpio_direction_output(unsigned pin, int value);
+int kw_gpio_get_value(unsigned pin);
+void kw_gpio_set_value(unsigned pin, int value);
+void kw_gpio_set_blink(unsigned pin, int blink);
+void kw_gpio_set_unused(unsigned pin);
+
+#define GPIO_INPUT_OK          (1 << 0)
+#define GPIO_OUTPUT_OK         (1 << 1)
+
+#endif