Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / arch / arm / cpu / armv7 / omap5 / abb.c

diff --git a/qemu/roms/u-boot/arch/arm/cpu/armv7/omap5/abb.c b/qemu/roms/u-boot/arch/arm/cpu/armv7/omap5/abb.c
new file mode 100644 (file)
index 0000000..3bf8897
--- /dev/null
+++ b/qemu/roms/u-boot/arch/arm/cpu/armv7/omap5/abb.c
@@ -0,0 +1,57 @@
+/*
+ * Adaptive Body Bias programming sequence for OMAP5 family
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/io.h>
+
+/*
+ * Setup LDOVBB for OMAP5.
+ * On OMAP5+ some ABB settings are fused. They are handled
+ * in the following way:
+ *
+ * 1. corresponding EFUSE register contains ABB enable bit
+ *    and VSET value
+ * 2. If ABB enable bit is set to 1, than ABB should be
+ *    enabled, otherwise ABB should be disabled
+ * 3. If ABB is enabled, than VSET value should be copied
+ *    to corresponding MUX control register
+ */
+s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
+{
+       u32 vset;
+       u32 fuse_enable_mask = OMAP5_ABB_FUSE_ENABLE_MASK;
+       u32 fuse_vset_mask = OMAP5_ABB_FUSE_VSET_MASK;
+
+       if (!is_omap54xx()) {
+               /* DRA7 */
+               fuse_enable_mask = DRA7_ABB_FUSE_ENABLE_MASK;
+               fuse_vset_mask = DRA7_ABB_FUSE_VSET_MASK;
+       }
+       /*
+        * ABB parameters must be properly fused
+        * otherwise ABB should be disabled
+        */
+       vset = readl(fuse);
+       if (!(vset & fuse_enable_mask))
+               return -1;
+
+       /* prepare VSET value for LDOVBB mux register */
+       vset &= fuse_vset_mask;
+       vset >>= ffs(fuse_vset_mask) - 1;
+       vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1;
+       vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK;
+
+       /* setup LDOVBB using fused value */
+       clrsetbits_le32(ldovbb,  OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset);
+
+       return 0;
+}