--- /dev/null
+/*
+ * Freescale i.MX28 RAM init
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/compiler.h>
+
+#include "mxs_init.h"
+
+static uint32_t dram_vals[] = {
+/*
+ * i.MX28 DDR2 at 200MHz
+ */
+#if defined(CONFIG_MX28)
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000100, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00010101, 0x01010101,
+ 0x000f0f01, 0x0f02020a, 0x00000000, 0x00010101,
+ 0x00000100, 0x00000100, 0x00000000, 0x00000002,
+ 0x01010000, 0x07080403, 0x06005003, 0x0a0000c8,
+ 0x02009c40, 0x0002030c, 0x0036a609, 0x031a0612,
+ 0x02030202, 0x00c8001c, 0x00000000, 0x00000000,
+ 0x00012100, 0xffff0303, 0x00012100, 0xffff0303,
+ 0x00012100, 0xffff0303, 0x00012100, 0xffff0303,
+ 0x00000003, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000612, 0x01000F02,
+ 0x06120612, 0x00000200, 0x00020007, 0xf4004a27,
+ 0xf4004a27, 0xf4004a27, 0xf4004a27, 0x07000300,
+ 0x07000300, 0x07400300, 0x07400300, 0x00000005,
+ 0x00000000, 0x00000000, 0x01000000, 0x01020408,
+ 0x08040201, 0x000f1133, 0x00000000, 0x00001f04,
+ 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04,
+ 0x00001f04, 0x00001f04, 0x00001f04, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00010000, 0x00030404,
+ 0x00000003, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x01010000,
+ 0x01000000, 0x03030000, 0x00010303, 0x01020202,
+ 0x00000000, 0x02040303, 0x21002103, 0x00061200,
+ 0x06120612, 0x04420442, 0x04420442, 0x00040004,
+ 0x00040004, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0xffffffff
+
+/*
+ * i.MX23 DDR at 133MHz
+ */
+#elif defined(CONFIG_MX23)
+ 0x01010001, 0x00010100, 0x01000101, 0x00000001,
+ 0x00000101, 0x00000000, 0x00010000, 0x01000001,
+ 0x00000000, 0x00000001, 0x07000200, 0x00070202,
+ 0x02020000, 0x04040a01, 0x00000201, 0x02040000,
+ 0x02000000, 0x19000f08, 0x0d0d0000, 0x02021313,
+ 0x02061521, 0x0000000a, 0x00080008, 0x00200020,
+ 0x00200020, 0x00200020, 0x000003f7, 0x00000000,
+ 0x00000000, 0x00000020, 0x00000020, 0x00c80000,
+ 0x000a23cd, 0x000000c8, 0x00006665, 0x00000000,
+ 0x00000101, 0x00040001, 0x00000000, 0x00000000,
+ 0x00010000
+#else
+#error Unsupported memory initialization
+#endif
+};
+
+__weak void mxs_adjust_memory_params(uint32_t *dram_vals)
+{
+}
+
+#ifdef CONFIG_MX28
+static void initialize_dram_values(void)
+{
+ int i;
+
+ mxs_adjust_memory_params(dram_vals);
+
+ for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
+ writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
+}
+#else
+static void initialize_dram_values(void)
+{
+ int i;
+
+ mxs_adjust_memory_params(dram_vals);
+
+ /*
+ * HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as
+ * per FSL bootlets code.
+ *
+ * mx23 Reference Manual marks HW_DRAM_CTL27 and HW_DRAM_CTL28 as
+ * "reserved".
+ * HW_DRAM_CTL8 is setup as the last element.
+ * So skip the initialization of these HW_DRAM_CTL registers.
+ */
+ for (i = 0; i < ARRAY_SIZE(dram_vals); i++) {
+ if (i == 8 || i == 27 || i == 28 || i == 35)
+ continue;
+ writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
+ }
+
+ /*
+ * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last
+ * element to be set
+ */
+ writel((1 << 24), MXS_DRAM_BASE + (4 * 8));
+}
+#endif
+
+static void mxs_mem_init_clock(void)
+{
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+#if defined(CONFIG_MX23)
+ /* Fractional divider for ref_emi is 33 ; 480 * 18 / 33 = 266MHz */
+ const unsigned char divider = 33;
+#elif defined(CONFIG_MX28)
+ /* Fractional divider for ref_emi is 21 ; 480 * 18 / 21 = 411MHz */
+ const unsigned char divider = 21;
+#endif
+
+ /* Gate EMI clock */
+ writeb(CLKCTRL_FRAC_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_EMI]);
+
+ /* Set fractional divider for ref_emi */
+ writeb(CLKCTRL_FRAC_CLKGATE | (divider & CLKCTRL_FRAC_FRAC_MASK),
+ &clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_EMI]);
+
+ /* Ungate EMI clock */
+ writeb(CLKCTRL_FRAC_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_EMI]);
+
+ early_delay(11000);
+
+ /* Set EMI clock divider for EMI clock to 411 / 2 = 205MHz */
+ writel((2 << CLKCTRL_EMI_DIV_EMI_OFFSET) |
+ (1 << CLKCTRL_EMI_DIV_XTAL_OFFSET),
+ &clkctrl_regs->hw_clkctrl_emi);
+
+ /* Unbypass EMI */
+ writel(CLKCTRL_CLKSEQ_BYPASS_EMI,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+
+ early_delay(10000);
+}
+
+static void mxs_mem_setup_cpu_and_hbus(void)
+{
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /* Set fractional divider for ref_cpu to 480 * 18 / 19 = 454MHz
+ * and ungate CPU clock */
+ writeb(19 & CLKCTRL_FRAC_FRAC_MASK,
+ (uint8_t *)&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]);
+
+ /* Set CPU bypass */
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+
+ /* HBUS = 151MHz */
+ writel(CLKCTRL_HBUS_DIV_MASK, &clkctrl_regs->hw_clkctrl_hbus_set);
+ writel(((~3) << CLKCTRL_HBUS_DIV_OFFSET) & CLKCTRL_HBUS_DIV_MASK,
+ &clkctrl_regs->hw_clkctrl_hbus_clr);
+
+ early_delay(10000);
+
+ /* CPU clock divider = 1 */
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_cpu,
+ CLKCTRL_CPU_DIV_CPU_MASK, 1);
+
+ /* Disable CPU bypass */
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+
+ early_delay(15000);
+}
+
+static void mxs_mem_setup_vdda(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)MXS_POWER_BASE;
+
+ writel((0xc << POWER_VDDACTRL_TRG_OFFSET) |
+ (0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) |
+ POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW,
+ &power_regs->hw_power_vddactrl);
+}
+
+uint32_t mxs_mem_get_size(void)
+{
+ uint32_t sz, da;
+ uint32_t *vt = (uint32_t *)0x20;
+ /* The following is "subs pc, r14, #4", used as return from DABT. */
+ const uint32_t data_abort_memdetect_handler = 0xe25ef004;
+
+ /* Replace the DABT handler. */
+ da = vt[4];
+ vt[4] = data_abort_memdetect_handler;
+
+ sz = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+
+ /* Restore the old DABT handler. */
+ vt[4] = da;
+
+ return sz;
+}
+
+#ifdef CONFIG_MX23
+static void mx23_mem_setup_vddmem(void)
+{
+ struct mxs_power_regs *power_regs =
+ (struct mxs_power_regs *)MXS_POWER_BASE;
+
+ clrbits_le32(&power_regs->hw_power_vddmemctrl,
+ POWER_VDDMEMCTRL_ENABLE_ILIMIT);
+
+}
+
+static void mx23_mem_init(void)
+{
+ /*
+ * Reset/ungate the EMI block. This is essential, otherwise the system
+ * suffers from memory instability. This thing is mx23 specific and is
+ * no longer present on mx28.
+ */
+ mxs_reset_block((struct mxs_register_32 *)MXS_EMI_BASE);
+
+ mx23_mem_setup_vddmem();
+
+ /*
+ * Configure the DRAM registers
+ */
+
+ /* Clear START and SREFRESH bit from DRAM_CTL8 */
+ clrbits_le32(MXS_DRAM_BASE + 0x20, (1 << 16) | (1 << 8));
+
+ initialize_dram_values();
+
+ /* Set START bit in DRAM_CTL8 */
+ setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16);
+
+ clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17);
+ early_delay(20000);
+
+ /* Adjust EMI port priority. */
+ clrsetbits_le32(0x80020000, 0x1f << 16, 0x2);
+ early_delay(20000);
+
+ setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 19);
+ setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 11);
+}
+#endif
+
+#ifdef CONFIG_MX28
+static void mx28_mem_init(void)
+{
+ struct mxs_pinctrl_regs *pinctrl_regs =
+ (struct mxs_pinctrl_regs *)MXS_PINCTRL_BASE;
+
+ /* Set DDR2 mode */
+ writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
+ &pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set);
+
+ /*
+ * Configure the DRAM registers
+ */
+
+ /* Clear START bit from DRAM_CTL16 */
+ clrbits_le32(MXS_DRAM_BASE + 0x40, 1);
+
+ initialize_dram_values();
+
+ /* Clear SREFRESH bit from DRAM_CTL17 */
+ clrbits_le32(MXS_DRAM_BASE + 0x44, 1);
+
+ /* Set START bit in DRAM_CTL16 */
+ setbits_le32(MXS_DRAM_BASE + 0x40, 1);
+
+ /* Wait for bit 20 (DRAM init complete) in DRAM_CTL58 */
+ while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20)))
+ ;
+}
+#endif
+
+void mxs_mem_init(void)
+{
+ early_delay(11000);
+
+ mxs_mem_init_clock();
+
+ mxs_mem_setup_vdda();
+
+#if defined(CONFIG_MX23)
+ mx23_mem_init();
+#elif defined(CONFIG_MX28)
+ mx28_mem_init();
+#endif
+
+ early_delay(10000);
+
+ mxs_mem_setup_cpu_and_hbus();
+}
Code Review / kvmfornfv.git / blobdiff