Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / arch / arm / cpu / arm1136 / mx31 / devices.c

diff --git a/qemu/roms/u-boot/arch/arm/cpu/arm1136/mx31/devices.c b/qemu/roms/u-boot/arch/arm/cpu/arm1136/mx31/devices.c
new file mode 100644 (file)
index 0000000..ae5db86
--- /dev/null
+++ b/qemu/roms/u-boot/arch/arm/cpu/arm1136/mx31/devices.c
@@ -0,0 +1,51 @@
+/*
+ *
+ * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+
+void mx31_uart1_hw_init(void)
+{
+       /* setup pins for UART1 */
+       mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
+       mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
+       mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
+       mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
+}
+
+void mx31_uart2_hw_init(void)
+{
+       /* setup pins for UART2 */
+       mx31_gpio_mux(MUX_RXD2__UART2_RXD_MUX);
+       mx31_gpio_mux(MUX_TXD2__UART2_TXD_MUX);
+       mx31_gpio_mux(MUX_RTS2__UART2_RTS_B);
+       mx31_gpio_mux(MUX_CTS2__UART2_CTS_B);
+}
+
+#ifdef CONFIG_MXC_SPI
+/*
+ * Note: putting several spi setups here makes no sense as they may differ
+ * at board level (physical pin SS0 of CSPI2 may aswell be used as SS0 of CSPI3)
+ */
+void mx31_spi2_hw_init(void)
+{
+       /* SPI2 */
+       mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
+       mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
+       mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
+       mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
+       mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
+       mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
+       mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
+
+       /* start SPI2 clock */
+       __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
+}
+#endif