Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / seabios / src / hw / usb-uhci.h

diff --git a/qemu/roms/seabios/src/hw/usb-uhci.h b/qemu/roms/seabios/src/hw/usb-uhci.h
new file mode 100644 (file)
index 0000000..bff70c6
--- /dev/null
+++ b/qemu/roms/seabios/src/hw/usb-uhci.h
@@ -0,0 +1,128 @@
+#ifndef __USB_UHCI_H
+#define __USB_UHCI_H
+
+// usb-uhci.c
+void uhci_setup(void);
+struct usbdevice_s;
+struct usb_endpoint_descriptor;
+struct usb_pipe;
+struct usb_pipe *uhci_realloc_pipe(struct usbdevice_s *usbdev
+                                   , struct usb_pipe *upipe
+                                   , struct usb_endpoint_descriptor *epdesc);
+int uhci_send_pipe(struct usb_pipe *p, int dir, const void *cmd
+                   , void *data, int datasize);
+int uhci_poll_intr(struct usb_pipe *p, void *data);
+
+
+/****************************************************************
+ * uhci structs and flags
+ ****************************************************************/
+
+/* USB port status and control registers */
+#define USBPORTSC1      16
+#define USBPORTSC2      18
+#define   USBPORTSC_CCS         0x0001  /* Current Connect Status
+                                         * ("device present") */
+#define   USBPORTSC_CSC         0x0002  /* Connect Status Change */
+#define   USBPORTSC_PE          0x0004  /* Port Enable */
+#define   USBPORTSC_PEC         0x0008  /* Port Enable Change */
+#define   USBPORTSC_DPLUS       0x0010  /* D+ high (line status) */
+#define   USBPORTSC_DMINUS      0x0020  /* D- high (line status) */
+#define   USBPORTSC_RD          0x0040  /* Resume Detect */
+#define   USBPORTSC_RES1        0x0080  /* reserved, always 1 */
+#define   USBPORTSC_LSDA        0x0100  /* Low Speed Device Attached */
+#define   USBPORTSC_PR          0x0200  /* Port Reset */
+
+/* Legacy support register */
+#define USBLEGSUP               0xc0
+#define   USBLEGSUP_RWC         0x8f00  /* the R/WC bits */
+
+/* Command register */
+#define USBCMD          0
+#define   USBCMD_RS             0x0001  /* Run/Stop */
+#define   USBCMD_HCRESET        0x0002  /* Host reset */
+#define   USBCMD_GRESET         0x0004  /* Global reset */
+#define   USBCMD_EGSM           0x0008  /* Global Suspend Mode */
+#define   USBCMD_FGR            0x0010  /* Force Global Resume */
+#define   USBCMD_SWDBG          0x0020  /* SW Debug mode */
+#define   USBCMD_CF             0x0040  /* Config Flag (sw only) */
+#define   USBCMD_MAXP           0x0080  /* Max Packet (0 = 32, 1 = 64) */
+
+/* Status register */
+#define USBSTS          2
+#define   USBSTS_USBINT         0x0001  /* Interrupt due to IOC */
+#define   USBSTS_ERROR          0x0002  /* Interrupt due to error */
+#define   USBSTS_RD             0x0004  /* Resume Detect */
+#define   USBSTS_HSE            0x0008  /* Host System Error: PCI problems */
+#define   USBSTS_HCPE           0x0010  /* Host Controller Process Error:
+                                         * the schedule is buggy */
+#define   USBSTS_HCH            0x0020  /* HC Halted */
+
+/* Interrupt enable register */
+#define USBINTR         4
+#define   USBINTR_TIMEOUT       0x0001  /* Timeout/CRC error enable */
+#define   USBINTR_RESUME        0x0002  /* Resume interrupt enable */
+#define   USBINTR_IOC           0x0004  /* Interrupt On Complete enable */
+#define   USBINTR_SP            0x0008  /* Short packet interrupt enable */
+
+#define USBFRNUM        6
+#define USBFLBASEADD    8
+#define USBSOF          12
+#define   USBSOF_DEFAULT        64      /* Frame length is exactly 1 ms */
+
+struct uhci_framelist {
+    u32 links[1024];
+} PACKED;
+
+#define TD_CTRL_SPD             (1 << 29)       /* Short Packet Detect */
+#define TD_CTRL_C_ERR_MASK      (3 << 27)       /* Error Counter bits */
+#define TD_CTRL_C_ERR_SHIFT     27
+#define TD_CTRL_LS              (1 << 26)       /* Low Speed Device */
+#define TD_CTRL_IOS             (1 << 25)       /* Isochronous Select */
+#define TD_CTRL_IOC             (1 << 24)       /* Interrupt on Complete */
+#define TD_CTRL_ACTIVE          (1 << 23)       /* TD Active */
+#define TD_CTRL_STALLED         (1 << 22)       /* TD Stalled */
+#define TD_CTRL_DBUFERR         (1 << 21)       /* Data Buffer Error */
+#define TD_CTRL_BABBLE          (1 << 20)       /* Babble Detected */
+#define TD_CTRL_NAK             (1 << 19)       /* NAK Received */
+#define TD_CTRL_CRCTIMEO        (1 << 18)       /* CRC/Time Out Error */
+#define TD_CTRL_BITSTUFF        (1 << 17)       /* Bit Stuff Error */
+#define TD_CTRL_ACTLEN_MASK     0x7FF   /* actual length, encoded as n - 1 */
+
+#define TD_CTRL_ANY_ERROR       (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
+                                 TD_CTRL_BABBLE | TD_CTRL_CRCTIMEO | \
+                                 TD_CTRL_BITSTUFF)
+#define uhci_maxerr(err)                ((err) << TD_CTRL_C_ERR_SHIFT)
+
+#define TD_TOKEN_DEVADDR_SHIFT  8
+#define TD_TOKEN_TOGGLE_SHIFT   19
+#define TD_TOKEN_TOGGLE         (1 << 19)
+#define TD_TOKEN_EXPLEN_SHIFT   21
+#define TD_TOKEN_EXPLEN_MASK    0x7FF   /* expected length, encoded as n-1 */
+#define TD_TOKEN_PID_MASK       0xFF
+
+#define uhci_explen(len)        ((((len) - 1) & TD_TOKEN_EXPLEN_MASK) << \
+                                        TD_TOKEN_EXPLEN_SHIFT)
+
+#define uhci_expected_length(token) ((((token) >> TD_TOKEN_EXPLEN_SHIFT) + \
+                                        1) & TD_TOKEN_EXPLEN_MASK)
+
+struct uhci_td {
+    u32 link;
+    u32 status;
+    u32 token;
+    void *buffer;
+} PACKED;
+
+struct uhci_qh {
+    u32 link;
+    u32 element;
+} PACKED;
+
+#define UHCI_PTR_BITS           0x000F
+#define UHCI_PTR_TERM           0x0001
+#define UHCI_PTR_QH             0x0002
+#define UHCI_PTR_DEPTH          0x0004
+#define UHCI_PTR_BREADTH        0x0000
+
+#endif // usb-uhci.h