--- /dev/null
+// Low level ATA disk access
+//
+// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net>
+// Copyright (C) 2002 MandrakeSoft S.A.
+//
+// This file may be distributed under the terms of the GNU LGPLv3 license.
+
+#include "ata.h" // ATA_CB_STAT
+#include "biosvar.h" // GET_GLOBALFLAT
+#include "block.h" // struct drive_s
+#include "blockcmd.h" // CDB_CMD_READ_10
+#include "byteorder.h" // be16_to_cpu
+#include "malloc.h" // malloc_fseg
+#include "output.h" // dprintf
+#include "pci.h" // foreachpci
+#include "pci_ids.h" // PCI_CLASS_STORAGE_OTHER
+#include "pci_regs.h" // PCI_INTERRUPT_LINE
+#include "pic.h" // enable_hwirq
+#include "stacks.h" // yield
+#include "std/disk.h" // DISK_RET_SUCCESS
+#include "string.h" // memset
+#include "util.h" // timer_calc
+#include "x86.h" // inb
+
+#define IDE_TIMEOUT 32000 //32 seconds max for IDE ops
+
+
+/****************************************************************
+ * Helper functions
+ ****************************************************************/
+
+// Wait for the specified ide state
+static inline int
+await_ide(u8 mask, u8 flags, u16 base, u16 timeout)
+{
+ u32 end = timer_calc(timeout);
+ for (;;) {
+ u8 status = inb(base+ATA_CB_STAT);
+ if ((status & mask) == flags)
+ return status;
+ if (timer_check(end)) {
+ warn_timeout();
+ return -1;
+ }
+ yield();
+ }
+}
+
+// Wait for the device to be not-busy.
+static int
+await_not_bsy(u16 base)
+{
+ return await_ide(ATA_CB_STAT_BSY, 0, base, IDE_TIMEOUT);
+}
+
+// Wait for the device to be ready.
+static int
+await_rdy(u16 base)
+{
+ return await_ide(ATA_CB_STAT_RDY, ATA_CB_STAT_RDY, base, IDE_TIMEOUT);
+}
+
+// Wait for ide state - pauses for one ata cycle first.
+static inline int
+pause_await_not_bsy(u16 iobase1, u16 iobase2)
+{
+ // Wait one PIO transfer cycle.
+ inb(iobase2 + ATA_CB_ASTAT);
+
+ return await_not_bsy(iobase1);
+}
+
+// Wait for ide state - pause for 400ns first.
+static inline int
+ndelay_await_not_bsy(u16 iobase1)
+{
+ ndelay(400);
+ return await_not_bsy(iobase1);
+}
+
+// Reset a drive
+static void
+ata_reset(struct atadrive_s *adrive_gf)
+{
+ struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf);
+ u8 slave = GET_GLOBALFLAT(adrive_gf->slave);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
+
+ dprintf(6, "ata_reset drive=%p\n", &adrive_gf->drive);
+ // Pulse SRST
+ outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN | ATA_CB_DC_SRST, iobase2+ATA_CB_DC);
+ udelay(5);
+ outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2+ATA_CB_DC);
+ msleep(2);
+
+ // wait for device to become not busy.
+ int status = await_not_bsy(iobase1);
+ if (status < 0)
+ goto done;
+ if (slave) {
+ // Change device.
+ u32 end = timer_calc(IDE_TIMEOUT);
+ for (;;) {
+ outb(ATA_CB_DH_DEV1, iobase1 + ATA_CB_DH);
+ status = ndelay_await_not_bsy(iobase1);
+ if (status < 0)
+ goto done;
+ if (inb(iobase1 + ATA_CB_DH) == ATA_CB_DH_DEV1)
+ break;
+ // Change drive request failed to take effect - retry.
+ if (timer_check(end)) {
+ warn_timeout();
+ goto done;
+ }
+ }
+ } else {
+ // QEMU doesn't reset dh on reset, so set it explicitly.
+ outb(ATA_CB_DH_DEV0, iobase1 + ATA_CB_DH);
+ }
+
+ // On a user-reset request, wait for RDY if it is an ATA device.
+ u8 type=GET_GLOBALFLAT(adrive_gf->drive.type);
+ if (type == DTYPE_ATA)
+ status = await_rdy(iobase1);
+
+done:
+ // Enable interrupts
+ outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);
+
+ dprintf(6, "ata_reset exit status=%x\n", status);
+}
+
+// Check for drive RDY for 16bit interface command.
+static int
+isready(struct atadrive_s *adrive_gf)
+{
+ // Read the status from controller
+ struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u8 status = inb(iobase1 + ATA_CB_STAT);
+ if ((status & (ATA_CB_STAT_BSY|ATA_CB_STAT_RDY)) == ATA_CB_STAT_RDY)
+ return DISK_RET_SUCCESS;
+ return DISK_RET_ENOTREADY;
+}
+
+
+/****************************************************************
+ * ATA send command
+ ****************************************************************/
+
+struct ata_pio_command {
+ u8 feature;
+ u8 sector_count;
+ u8 lba_low;
+ u8 lba_mid;
+ u8 lba_high;
+ u8 device;
+ u8 command;
+
+ u8 feature2;
+ u8 sector_count2;
+ u8 lba_low2;
+ u8 lba_mid2;
+ u8 lba_high2;
+};
+
+// Send an ata command to the drive.
+static int
+send_cmd(struct atadrive_s *adrive_gf, struct ata_pio_command *cmd)
+{
+ struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf);
+ u8 slave = GET_GLOBALFLAT(adrive_gf->slave);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+
+ // Select device
+ int status = await_not_bsy(iobase1);
+ if (status < 0)
+ return status;
+ u8 newdh = ((cmd->device & ~ATA_CB_DH_DEV1)
+ | (slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0));
+ u8 olddh = inb(iobase1 + ATA_CB_DH);
+ outb(newdh, iobase1 + ATA_CB_DH);
+ if ((olddh ^ newdh) & (1<<4)) {
+ // Was a device change - wait for device to become not busy.
+ status = ndelay_await_not_bsy(iobase1);
+ if (status < 0)
+ return status;
+ }
+
+ // Check for ATA_CMD_(READ|WRITE)_(SECTORS|DMA)_EXT commands.
+ if ((cmd->command & ~0x11) == ATA_CMD_READ_SECTORS_EXT) {
+ outb(cmd->feature2, iobase1 + ATA_CB_FR);
+ outb(cmd->sector_count2, iobase1 + ATA_CB_SC);
+ outb(cmd->lba_low2, iobase1 + ATA_CB_SN);
+ outb(cmd->lba_mid2, iobase1 + ATA_CB_CL);
+ outb(cmd->lba_high2, iobase1 + ATA_CB_CH);
+ }
+ outb(cmd->feature, iobase1 + ATA_CB_FR);
+ outb(cmd->sector_count, iobase1 + ATA_CB_SC);
+ outb(cmd->lba_low, iobase1 + ATA_CB_SN);
+ outb(cmd->lba_mid, iobase1 + ATA_CB_CL);
+ outb(cmd->lba_high, iobase1 + ATA_CB_CH);
+ outb(cmd->command, iobase1 + ATA_CB_CMD);
+
+ return 0;
+}
+
+// Wait for data after calling 'send_cmd'.
+static int
+ata_wait_data(u16 iobase1)
+{
+ int status = ndelay_await_not_bsy(iobase1);
+ if (status < 0)
+ return status;
+
+ if (status & ATA_CB_STAT_ERR) {
+ dprintf(6, "send_cmd : read error (status=%02x err=%02x)\n"
+ , status, inb(iobase1 + ATA_CB_ERR));
+ return -4;
+ }
+ if (!(status & ATA_CB_STAT_DRQ)) {
+ dprintf(6, "send_cmd : DRQ not set (status %02x)\n", status);
+ return -5;
+ }
+
+ return 0;
+}
+
+// Send an ata command that does not transfer any further data.
+int
+ata_cmd_nondata(struct atadrive_s *adrive_gf, struct ata_pio_command *cmd)
+{
+ struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
+
+ // Disable interrupts
+ outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC);
+
+ int ret = send_cmd(adrive_gf, cmd);
+ if (ret)
+ goto fail;
+ ret = ndelay_await_not_bsy(iobase1);
+ if (ret < 0)
+ goto fail;
+
+ if (ret & ATA_CB_STAT_ERR) {
+ dprintf(6, "nondata cmd : read error (status=%02x err=%02x)\n"
+ , ret, inb(iobase1 + ATA_CB_ERR));
+ ret = -4;
+ goto fail;
+ }
+ if (ret & ATA_CB_STAT_DRQ) {
+ dprintf(6, "nondata cmd : DRQ set (status %02x)\n", ret);
+ ret = -5;
+ goto fail;
+ }
+
+fail:
+ // Enable interrupts
+ outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);
+
+ return ret;
+}
+
+
+/****************************************************************
+ * ATA PIO transfers
+ ****************************************************************/
+
+// Transfer 'op->count' blocks (of 'blocksize' bytes) to/from drive
+// 'op->drive_gf'.
+static int
+ata_pio_transfer(struct disk_op_s *op, int iswrite, int blocksize)
+{
+ dprintf(16, "ata_pio_transfer id=%p write=%d count=%d bs=%d buf=%p\n"
+ , op->drive_gf, iswrite, op->count, blocksize, op->buf_fl);
+
+ struct atadrive_s *adrive_gf = container_of(
+ op->drive_gf, struct atadrive_s, drive);
+ struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
+ int count = op->count;
+ void *buf_fl = op->buf_fl;
+ int status;
+ for (;;) {
+ if (iswrite) {
+ // Write data to controller
+ dprintf(16, "Write sector id=%p dest=%p\n", op->drive_gf, buf_fl);
+ if (CONFIG_ATA_PIO32)
+ outsl_fl(iobase1, buf_fl, blocksize / 4);
+ else
+ outsw_fl(iobase1, buf_fl, blocksize / 2);
+ } else {
+ // Read data from controller
+ dprintf(16, "Read sector id=%p dest=%p\n", op->drive_gf, buf_fl);
+ if (CONFIG_ATA_PIO32)
+ insl_fl(iobase1, buf_fl, blocksize / 4);
+ else
+ insw_fl(iobase1, buf_fl, blocksize / 2);
+ }
+ buf_fl += blocksize;
+
+ status = pause_await_not_bsy(iobase1, iobase2);
+ if (status < 0) {
+ // Error
+ op->count -= count;
+ return status;
+ }
+
+ count--;
+ if (!count)
+ break;
+ status &= (ATA_CB_STAT_BSY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR);
+ if (status != ATA_CB_STAT_DRQ) {
+ dprintf(6, "ata_pio_transfer : more sectors left (status %02x)\n"
+ , status);
+ op->count -= count;
+ return -6;
+ }
+ }
+
+ status &= (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ
+ | ATA_CB_STAT_ERR);
+ if (!iswrite)
+ status &= ~ATA_CB_STAT_DF;
+ if (status != 0) {
+ dprintf(6, "ata_pio_transfer : no sectors left (status %02x)\n", status);
+ return -7;
+ }
+
+ return 0;
+}
+
+
+/****************************************************************
+ * ATA DMA transfers
+ ****************************************************************/
+
+#define BM_CMD 0
+#define BM_CMD_MEMWRITE 0x08
+#define BM_CMD_START 0x01
+#define BM_STATUS 2
+#define BM_STATUS_IRQ 0x04
+#define BM_STATUS_ERROR 0x02
+#define BM_STATUS_ACTIVE 0x01
+#define BM_TABLE 4
+
+struct sff_dma_prd {
+ u32 buf_fl;
+ u32 count;
+};
+
+// Check if DMA available and setup transfer if so.
+static int
+ata_try_dma(struct disk_op_s *op, int iswrite, int blocksize)
+{
+ ASSERT16();
+ if (! CONFIG_ATA_DMA)
+ return -1;
+ u32 dest = (u32)op->buf_fl;
+ if (dest & 1)
+ // Need minimum alignment of 1.
+ return -1;
+ struct atadrive_s *adrive_gf = container_of(
+ op->drive_gf, struct atadrive_s, drive);
+ struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf);
+ u16 iomaster = GET_GLOBALFLAT(chan_gf->iomaster);
+ if (! iomaster)
+ return -1;
+ u32 bytes = op->count * blocksize;
+ if (! bytes)
+ return -1;
+
+ // Build PRD dma structure.
+ struct sff_dma_prd *dma = MAKE_FLATPTR(SEG_LOW, ExtraStack);
+ struct sff_dma_prd *origdma = dma;
+ while (bytes) {
+ if (dma >= &origdma[16])
+ // Too many descriptors..
+ return -1;
+ u32 count = bytes;
+ u32 max = 0x10000 - (dest & 0xffff);
+ if (count > max)
+ count = max;
+
+ SET_LOWFLAT(dma->buf_fl, dest);
+ bytes -= count;
+ if (!bytes)
+ // Last descriptor.
+ count |= 1<<31;
+ dprintf(16, "dma@%p: %08x %08x\n", dma, dest, count);
+ dest += count;
+ SET_LOWFLAT(dma->count, count);
+ dma++;
+ }
+
+ // Program bus-master controller.
+ outl((u32)origdma, iomaster + BM_TABLE);
+ u8 oldcmd = inb(iomaster + BM_CMD) & ~(BM_CMD_MEMWRITE|BM_CMD_START);
+ outb(oldcmd | (iswrite ? 0x00 : BM_CMD_MEMWRITE), iomaster + BM_CMD);
+ outb(BM_STATUS_ERROR|BM_STATUS_IRQ, iomaster + BM_STATUS);
+
+ return 0;
+}
+
+// Transfer data using DMA.
+static int
+ata_dma_transfer(struct disk_op_s *op)
+{
+ if (! CONFIG_ATA_DMA)
+ return -1;
+ dprintf(16, "ata_dma_transfer id=%p buf=%p\n", op->drive_gf, op->buf_fl);
+
+ struct atadrive_s *adrive_gf = container_of(
+ op->drive_gf, struct atadrive_s, drive);
+ struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf);
+ u16 iomaster = GET_GLOBALFLAT(chan_gf->iomaster);
+
+ // Start bus-master controller.
+ u8 oldcmd = inb(iomaster + BM_CMD);
+ outb(oldcmd | BM_CMD_START, iomaster + BM_CMD);
+
+ u32 end = timer_calc(IDE_TIMEOUT);
+ u8 status;
+ for (;;) {
+ status = inb(iomaster + BM_STATUS);
+ if (status & BM_STATUS_IRQ)
+ break;
+ // Transfer in progress
+ if (timer_check(end)) {
+ // Timeout.
+ warn_timeout();
+ break;
+ }
+ yield();
+ }
+ outb(oldcmd & ~BM_CMD_START, iomaster + BM_CMD);
+
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
+ int idestatus = pause_await_not_bsy(iobase1, iobase2);
+
+ if ((status & (BM_STATUS_IRQ|BM_STATUS_ACTIVE)) == BM_STATUS_IRQ
+ && idestatus >= 0x00
+ && (idestatus & (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ
+ | ATA_CB_STAT_ERR)) == 0x00)
+ // Success.
+ return 0;
+
+ dprintf(6, "IDE DMA error (dma=%x ide=%x/%x/%x)\n", status, idestatus
+ , inb(iobase2 + ATA_CB_ASTAT), inb(iobase1 + ATA_CB_ERR));
+ return -1;
+}
+
+
+/****************************************************************
+ * ATA hard drive functions
+ ****************************************************************/
+
+// Transfer data to harddrive using PIO protocol.
+static int
+ata_pio_cmd_data(struct disk_op_s *op, int iswrite, struct ata_pio_command *cmd)
+{
+ struct atadrive_s *adrive_gf = container_of(
+ op->drive_gf, struct atadrive_s, drive);
+ struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
+
+ // Disable interrupts
+ outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC);
+
+ int ret = send_cmd(adrive_gf, cmd);
+ if (ret)
+ goto fail;
+ ret = ata_wait_data(iobase1);
+ if (ret)
+ goto fail;
+ ret = ata_pio_transfer(op, iswrite, DISK_SECTOR_SIZE);
+
+fail:
+ // Enable interrupts
+ outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);
+ return ret;
+}
+
+// Transfer data to harddrive using DMA protocol.
+static int
+ata_dma_cmd_data(struct disk_op_s *op, struct ata_pio_command *cmd)
+{
+ if (! CONFIG_ATA_DMA)
+ return -1;
+ struct atadrive_s *adrive_gf = container_of(
+ op->drive_gf, struct atadrive_s, drive);
+ int ret = send_cmd(adrive_gf, cmd);
+ if (ret)
+ return ret;
+ return ata_dma_transfer(op);
+}
+
+// Read/write count blocks from a harddrive.
+static int
+ata_readwrite(struct disk_op_s *op, int iswrite)
+{
+ u64 lba = op->lba;
+
+ int usepio = ata_try_dma(op, iswrite, DISK_SECTOR_SIZE);
+
+ struct ata_pio_command cmd;
+ memset(&cmd, 0, sizeof(cmd));
+
+ if (op->count >= (1<<8) || lba + op->count >= (1<<28)) {
+ cmd.sector_count2 = op->count >> 8;
+ cmd.lba_low2 = lba >> 24;
+ cmd.lba_mid2 = lba >> 32;
+ cmd.lba_high2 = lba >> 40;
+ lba &= 0xffffff;
+
+ if (usepio)
+ cmd.command = (iswrite ? ATA_CMD_WRITE_SECTORS_EXT
+ : ATA_CMD_READ_SECTORS_EXT);
+ else
+ cmd.command = (iswrite ? ATA_CMD_WRITE_DMA_EXT
+ : ATA_CMD_READ_DMA_EXT);
+ } else {
+ if (usepio)
+ cmd.command = (iswrite ? ATA_CMD_WRITE_SECTORS
+ : ATA_CMD_READ_SECTORS);
+ else
+ cmd.command = (iswrite ? ATA_CMD_WRITE_DMA
+ : ATA_CMD_READ_DMA);
+ }
+
+ cmd.sector_count = op->count;
+ cmd.lba_low = lba;
+ cmd.lba_mid = lba >> 8;
+ cmd.lba_high = lba >> 16;
+ cmd.device = ((lba >> 24) & 0xf) | ATA_CB_DH_LBA;
+
+ int ret;
+ if (usepio)
+ ret = ata_pio_cmd_data(op, iswrite, &cmd);
+ else
+ ret = ata_dma_cmd_data(op, &cmd);
+ if (ret)
+ return DISK_RET_EBADTRACK;
+ return DISK_RET_SUCCESS;
+}
+
+// 16bit command demuxer for ATA harddrives.
+int
+process_ata_op(struct disk_op_s *op)
+{
+ if (!CONFIG_ATA)
+ return 0;
+
+ struct atadrive_s *adrive_gf = container_of(
+ op->drive_gf, struct atadrive_s, drive);
+ switch (op->command) {
+ case CMD_READ:
+ return ata_readwrite(op, 0);
+ case CMD_WRITE:
+ return ata_readwrite(op, 1);
+ case CMD_RESET:
+ ata_reset(adrive_gf);
+ return DISK_RET_SUCCESS;
+ case CMD_ISREADY:
+ return isready(adrive_gf);
+ case CMD_FORMAT:
+ case CMD_VERIFY:
+ case CMD_SEEK:
+ return DISK_RET_SUCCESS;
+ default:
+ return DISK_RET_EPARAM;
+ }
+}
+
+
+/****************************************************************
+ * ATAPI functions
+ ****************************************************************/
+
+#define CDROM_CDB_SIZE 12
+
+// Low-level atapi command transmit function.
+int
+atapi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize)
+{
+ if (! CONFIG_ATA)
+ return 0;
+
+ struct atadrive_s *adrive_gf = container_of(
+ op->drive_gf, struct atadrive_s, drive);
+ struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf);
+ u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
+ u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);
+
+ struct ata_pio_command cmd;
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.lba_mid = blocksize;
+ cmd.lba_high = blocksize >> 8;
+ cmd.command = ATA_CMD_PACKET;
+
+ // Disable interrupts
+ outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC);
+
+ int ret = send_cmd(adrive_gf, &cmd);
+ if (ret)
+ goto fail;
+ ret = ata_wait_data(iobase1);
+ if (ret)
+ goto fail;
+
+ // Send command to device
+ outsw_fl(iobase1, MAKE_FLATPTR(GET_SEG(SS), cdbcmd), CDROM_CDB_SIZE / 2);
+
+ int status = pause_await_not_bsy(iobase1, iobase2);
+ if (status < 0) {
+ ret = status;
+ goto fail;
+ }
+
+ if (status & ATA_CB_STAT_ERR) {
+ u8 err = inb(iobase1 + ATA_CB_ERR);
+ // skip "Not Ready"
+ if (err != 0x20)
+ dprintf(6, "send_atapi_cmd : read error (status=%02x err=%02x)\n"
+ , status, err);
+ ret = -2;
+ goto fail;
+ }
+ if (blocksize) {
+ if (!(status & ATA_CB_STAT_DRQ)) {
+ dprintf(6, "send_atapi_cmd : DRQ not set (status %02x)\n", status);
+ ret = -3;
+ goto fail;
+ }
+
+ ret = ata_pio_transfer(op, 0, blocksize);
+ }
+
+fail:
+ // Enable interrupts
+ outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);
+ if (ret)
+ return DISK_RET_EBADTRACK;
+ return DISK_RET_SUCCESS;
+}
+
+
+/****************************************************************
+ * ATA detect and init
+ ****************************************************************/
+
+// Send an identify device or identify device packet command.
+static int
+send_ata_identity(struct atadrive_s *adrive, u16 *buffer, int command)
+{
+ memset(buffer, 0, DISK_SECTOR_SIZE);
+
+ struct disk_op_s dop;
+ memset(&dop, 0, sizeof(dop));
+ dop.drive_gf = &adrive->drive;
+ dop.count = 1;
+ dop.lba = 1;
+ dop.buf_fl = MAKE_FLATPTR(GET_SEG(SS), buffer);
+
+ struct ata_pio_command cmd;
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.command = command;
+
+ return ata_pio_cmd_data(&dop, 0, &cmd);
+}
+
+// Extract the ATA/ATAPI version info.
+int
+ata_extract_version(u16 *buffer)
+{
+ // Extract ATA/ATAPI version.
+ u16 ataversion = buffer[80];
+ u8 version;
+ for (version=15; version>0; version--)
+ if (ataversion & (1<<version))
+ break;
+ return version;
+}
+
+#define MAXMODEL 40
+
+// Extract the ATA/ATAPI model info.
+char *
+ata_extract_model(char *model, u32 size, u16 *buffer)
+{
+ // Read model name
+ int i;
+ for (i=0; i<size/2; i++)
+ *(u16*)&model[i*2] = be16_to_cpu(buffer[27+i]);
+ model[size] = 0x00;
+ nullTrailingSpace(model);
+ return model;
+}
+
+// Common init code between ata and atapi
+static struct atadrive_s *
+init_atadrive(struct atadrive_s *dummy, u16 *buffer)
+{
+ struct atadrive_s *adrive = malloc_fseg(sizeof(*adrive));
+ if (!adrive) {
+ warn_noalloc();
+ return NULL;
+ }
+ memset(adrive, 0, sizeof(*adrive));
+ adrive->chan_gf = dummy->chan_gf;
+ adrive->slave = dummy->slave;
+ adrive->drive.cntl_id = adrive->chan_gf->chanid * 2 + dummy->slave;
+ adrive->drive.removable = (buffer[0] & 0x80) ? 1 : 0;
+ return adrive;
+}
+
+// Detect if the given drive is an atapi - initialize it if so.
+static struct atadrive_s *
+init_drive_atapi(struct atadrive_s *dummy, u16 *buffer)
+{
+ // Send an IDENTIFY_DEVICE_PACKET command to device
+ int ret = send_ata_identity(dummy, buffer, ATA_CMD_IDENTIFY_PACKET_DEVICE);
+ if (ret)
+ return NULL;
+
+ // Success - setup as ATAPI.
+ struct atadrive_s *adrive = init_atadrive(dummy, buffer);
+ if (!adrive)
+ return NULL;
+ adrive->drive.type = DTYPE_ATA_ATAPI;
+ adrive->drive.blksize = CDROM_SECTOR_SIZE;
+ adrive->drive.sectors = (u64)-1;
+ u8 iscd = ((buffer[0] >> 8) & 0x1f) == 0x05;
+ char model[MAXMODEL+1];
+ char *desc = znprintf(MAXDESCSIZE
+ , "DVD/CD [ata%d-%d: %s ATAPI-%d %s]"
+ , adrive->chan_gf->chanid, adrive->slave
+ , ata_extract_model(model, MAXMODEL, buffer)
+ , ata_extract_version(buffer)
+ , (iscd ? "DVD/CD" : "Device"));
+ dprintf(1, "%s\n", desc);
+
+ // fill cdidmap
+ if (iscd) {
+ int prio = bootprio_find_ata_device(adrive->chan_gf->pci_tmp,
+ adrive->chan_gf->chanid,
+ adrive->slave);
+ boot_add_cd(&adrive->drive, desc, prio);
+ }
+
+ return adrive;
+}
+
+// Detect if the given drive is a regular ata drive - initialize it if so.
+static struct atadrive_s *
+init_drive_ata(struct atadrive_s *dummy, u16 *buffer)
+{
+ // Send an IDENTIFY_DEVICE command to device
+ int ret = send_ata_identity(dummy, buffer, ATA_CMD_IDENTIFY_DEVICE);
+ if (ret)
+ return NULL;
+
+ // Success - setup as ATA.
+ struct atadrive_s *adrive = init_atadrive(dummy, buffer);
+ if (!adrive)
+ return NULL;
+ adrive->drive.type = DTYPE_ATA;
+ adrive->drive.blksize = DISK_SECTOR_SIZE;
+
+ adrive->drive.pchs.cylinder = buffer[1];
+ adrive->drive.pchs.head = buffer[3];
+ adrive->drive.pchs.sector = buffer[6];
+
+ u64 sectors;
+ if (buffer[83] & (1 << 10)) // word 83 - lba48 support
+ sectors = *(u64*)&buffer[100]; // word 100-103
+ else
+ sectors = *(u32*)&buffer[60]; // word 60 and word 61
+ adrive->drive.sectors = sectors;
+ u64 adjsize = sectors >> 11;
+ char adjprefix = 'M';
+ if (adjsize >= (1 << 16)) {
+ adjsize >>= 10;
+ adjprefix = 'G';
+ }
+ char model[MAXMODEL+1];
+ char *desc = znprintf(MAXDESCSIZE
+ , "ata%d-%d: %s ATA-%d Hard-Disk (%u %ciBytes)"
+ , adrive->chan_gf->chanid, adrive->slave
+ , ata_extract_model(model, MAXMODEL, buffer)
+ , ata_extract_version(buffer)
+ , (u32)adjsize, adjprefix);
+ dprintf(1, "%s\n", desc);
+
+ int prio = bootprio_find_ata_device(adrive->chan_gf->pci_tmp,
+ adrive->chan_gf->chanid,
+ adrive->slave);
+ // Register with bcv system.
+ boot_add_hd(&adrive->drive, desc, prio);
+
+ return adrive;
+}
+
+static u32 SpinupEnd;
+
+// Wait for non-busy status and check for "floating bus" condition.
+static int
+powerup_await_non_bsy(u16 base)
+{
+ u8 orstatus = 0;
+ u8 status;
+ for (;;) {
+ status = inb(base+ATA_CB_STAT);
+ if (!(status & ATA_CB_STAT_BSY))
+ break;
+ orstatus |= status;
+ if (orstatus == 0xff) {
+ dprintf(4, "powerup IDE floating\n");
+ return orstatus;
+ }
+ if (timer_check(SpinupEnd)) {
+ warn_timeout();
+ return -1;
+ }
+ yield();
+ }
+ dprintf(6, "powerup iobase=%x st=%x\n", base, status);
+ return status;
+}
+
+// Detect any drives attached to a given controller.
+static void
+ata_detect(void *data)
+{
+ struct ata_channel_s *chan_gf = data;
+ struct atadrive_s dummy;
+ memset(&dummy, 0, sizeof(dummy));
+ dummy.chan_gf = chan_gf;
+ // Device detection
+ int didreset = 0;
+ u8 slave;
+ for (slave=0; slave<=1; slave++) {
+ // Wait for not-bsy.
+ u16 iobase1 = chan_gf->iobase1;
+ int status = powerup_await_non_bsy(iobase1);
+ if (status < 0)
+ continue;
+ u8 newdh = slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0;
+ outb(newdh, iobase1+ATA_CB_DH);
+ ndelay(400);
+ status = powerup_await_non_bsy(iobase1);
+ if (status < 0)
+ continue;
+
+ // Check if ioport registers look valid.
+ outb(newdh, iobase1+ATA_CB_DH);
+ u8 dh = inb(iobase1+ATA_CB_DH);
+ outb(0x55, iobase1+ATA_CB_SC);
+ outb(0xaa, iobase1+ATA_CB_SN);
+ u8 sc = inb(iobase1+ATA_CB_SC);
+ u8 sn = inb(iobase1+ATA_CB_SN);
+ dprintf(6, "ata_detect ata%d-%d: sc=%x sn=%x dh=%x\n"
+ , chan_gf->chanid, slave, sc, sn, dh);
+ if (sc != 0x55 || sn != 0xaa || dh != newdh)
+ continue;
+
+ // Prepare new drive.
+ dummy.slave = slave;
+
+ // reset the channel
+ if (!didreset) {
+ ata_reset(&dummy);
+ didreset = 1;
+ }
+
+ // check for ATAPI
+ u16 buffer[256];
+ struct atadrive_s *adrive = init_drive_atapi(&dummy, buffer);
+ if (!adrive) {
+ // Didn't find an ATAPI drive - look for ATA drive.
+ u8 st = inb(iobase1+ATA_CB_STAT);
+ if (!st)
+ // Status not set - can't be a valid drive.
+ continue;
+
+ // Wait for RDY.
+ int ret = await_rdy(iobase1);
+ if (ret < 0)
+ continue;
+
+ // check for ATA.
+ adrive = init_drive_ata(&dummy, buffer);
+ if (!adrive)
+ // No ATA drive found
+ continue;
+ }
+
+ u16 resetresult = buffer[93];
+ dprintf(6, "ata_detect resetresult=%04x\n", resetresult);
+ if (!slave && (resetresult & 0xdf61) == 0x4041)
+ // resetresult looks valid and device 0 is responding to
+ // device 1 requests - device 1 must not be present - skip
+ // detection.
+ break;
+ }
+}
+
+// Initialize an ata controller and detect its drives.
+static void
+init_controller(struct pci_device *pci, int irq
+ , u32 port1, u32 port2, u32 master)
+{
+ static int chanid = 0;
+ struct ata_channel_s *chan_gf = malloc_fseg(sizeof(*chan_gf));
+ if (!chan_gf) {
+ warn_noalloc();
+ return;
+ }
+ chan_gf->chanid = chanid++;
+ chan_gf->irq = irq;
+ chan_gf->pci_bdf = pci ? pci->bdf : -1;
+ chan_gf->pci_tmp = pci;
+ chan_gf->iobase1 = port1;
+ chan_gf->iobase2 = port2;
+ chan_gf->iomaster = master;
+ dprintf(1, "ATA controller %d at %x/%x/%x (irq %d dev %x)\n"
+ , chanid, port1, port2, master, irq, chan_gf->pci_bdf);
+ run_thread(ata_detect, chan_gf);
+}
+
+#define IRQ_ATA1 14
+#define IRQ_ATA2 15
+
+// Handle controllers on an ATA PCI device.
+static void
+init_pciata(struct pci_device *pci, u8 prog_if)
+{
+ pci->have_driver = 1;
+ u16 bdf = pci->bdf;
+ u8 pciirq = pci_config_readb(bdf, PCI_INTERRUPT_LINE);
+ int master = 0;
+ if (CONFIG_ATA_DMA && prog_if & 0x80) {
+ // Check for bus-mastering.
+ u32 bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_4);
+ if (bar & PCI_BASE_ADDRESS_SPACE_IO) {
+ master = bar & PCI_BASE_ADDRESS_IO_MASK;
+ pci_config_maskw(bdf, PCI_COMMAND, 0, PCI_COMMAND_MASTER);
+ }
+ }
+
+ u32 port1, port2, irq;
+ if (prog_if & 1) {
+ port1 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_0)
+ & PCI_BASE_ADDRESS_IO_MASK);
+ port2 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_1)
+ & PCI_BASE_ADDRESS_IO_MASK);
+ irq = pciirq;
+ } else {
+ port1 = PORT_ATA1_CMD_BASE;
+ port2 = PORT_ATA1_CTRL_BASE;
+ irq = IRQ_ATA1;
+ }
+ init_controller(pci, irq, port1, port2, master);
+
+ if (prog_if & 4) {
+ port1 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_2)
+ & PCI_BASE_ADDRESS_IO_MASK);
+ port2 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_3)
+ & PCI_BASE_ADDRESS_IO_MASK);
+ irq = pciirq;
+ } else {
+ port1 = PORT_ATA2_CMD_BASE;
+ port2 = PORT_ATA2_CTRL_BASE;
+ irq = IRQ_ATA2;
+ }
+ init_controller(pci, irq, port1, port2, master ? master + 8 : 0);
+}
+
+static void
+found_genericata(struct pci_device *pci, void *arg)
+{
+ init_pciata(pci, pci->prog_if);
+}
+
+static void
+found_compatibleahci(struct pci_device *pci, void *arg)
+{
+ if (CONFIG_AHCI)
+ // Already handled directly via native ahci interface.
+ return;
+ init_pciata(pci, 0x8f);
+}
+
+static const struct pci_device_id pci_ata_tbl[] = {
+ PCI_DEVICE_CLASS(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE
+ , found_genericata),
+ PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4391, found_compatibleahci),
+ PCI_DEVICE_END,
+};
+
+// Locate and init ata controllers.
+static void
+ata_scan(void)
+{
+ if (CONFIG_QEMU && hlist_empty(&PCIDevices)) {
+ // No PCI devices found - probably a QEMU "-M isapc" machine.
+ // Try using ISA ports for ATA controllers.
+ init_controller(NULL, IRQ_ATA1
+ , PORT_ATA1_CMD_BASE, PORT_ATA1_CTRL_BASE, 0);
+ init_controller(NULL, IRQ_ATA2
+ , PORT_ATA2_CMD_BASE, PORT_ATA2_CTRL_BASE, 0);
+ return;
+ }
+
+ // Scan PCI bus for ATA adapters
+ struct pci_device *pci;
+ foreachpci(pci) {
+ pci_init_device(pci_ata_tbl, pci, NULL);
+ }
+}
+
+void
+ata_setup(void)
+{
+ ASSERT32FLAT();
+ if (!CONFIG_ATA)
+ return;
+
+ dprintf(3, "init hard drives\n");
+
+ SpinupEnd = timer_calc(IDE_TIMEOUT);
+ ata_scan();
+
+ SET_BDA(disk_control_byte, 0xc0);
+
+ enable_hwirq(14, FUNC16(entry_76));
+}
Code Review / kvmfornfv.git / blobdiff