Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / seabios / src / config.h

diff --git a/qemu/roms/seabios/src/config.h b/qemu/roms/seabios/src/config.h
new file mode 100644 (file)
index 0000000..6da067d
--- /dev/null
+++ b/qemu/roms/seabios/src/config.h
@@ -0,0 +1,108 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "autoconf.h"
+
+// Configuration definitions.
+
+//#define BUILD_APPNAME  "QEMU"
+//#define BUILD_CPUNAME8 "QEMUCPU "
+//#define BUILD_APPNAME6 "QEMU  "
+//#define BUILD_APPNAME4 "QEMU"
+#define BUILD_APPNAME  "Bochs"
+#define BUILD_CPUNAME8 "BOCHSCPU"
+#define BUILD_APPNAME6 "BOCHS "
+#define BUILD_APPNAME4 "BXPC"
+
+// Maximum number of map entries in the e820 map
+#define BUILD_MAX_E820 32
+// Space to reserve in high-memory for tables
+#define BUILD_MAX_HIGHTABLE (256*1024)
+// Largest supported externaly facing drive id
+#define BUILD_MAX_EXTDRIVE 16
+// Number of bytes the smbios may be and still live in the f-segment
+#define BUILD_MAX_SMBIOS_FSEG     600
+
+#define BUILD_MODEL_ID      0xFC
+#define BUILD_SUBMODEL_ID   0x00
+#define BUILD_BIOS_REVISION 0x01
+
+// Various memory addresses used by the code.
+#define BUILD_STACK_ADDR          0x7000
+#define BUILD_S3RESUME_STACK_ADDR 0x1000
+#define BUILD_AP_BOOT_ADDR        0x10000
+#define BUILD_EBDA_MINIMUM        0x90000
+#define BUILD_LOWRAM_END          0xa0000
+#define BUILD_ROM_START           0xc0000
+#define BUILD_BIOS_ADDR           0xf0000
+#define BUILD_BIOS_SIZE           0x10000
+#define BUILD_EXTRA_STACK_SIZE    0x800
+// 32KB for shadow ram copying (works around emulator deficiencies)
+#define BUILD_BIOS_TMP_ADDR       0x30000
+#define BUILD_SMM_INIT_ADDR       0x30000
+#define BUILD_SMM_ADDR            0xa0000
+
+#define BUILD_PCIMEM_START        0xe0000000
+#define BUILD_PCIMEM_END          0xfec00000    /* IOAPIC is mapped at */
+#define BUILD_PCIMEM64_START      0x8000000000ULL
+#define BUILD_PCIMEM64_END        0x10000000000ULL
+
+#define BUILD_IOAPIC_ADDR         0xfec00000
+#define BUILD_IOAPIC_ID           0
+#define BUILD_HPET_ADDRESS        0xfed00000
+#define BUILD_APIC_ADDR           0xfee00000
+
+// PCI IRQS
+#define BUILD_PCI_IRQS            ((1<<5) | (1<<9) | (1<<10) | (1<<11))
+
+// Important real-mode segments
+#define SEG_IVT      0x0000
+#define SEG_BDA      0x0040
+#define SEG_BIOS     0xf000
+
+// Segment definitions in protected mode (see rombios32_gdt in misc.c)
+#define SEG32_MODE32_CS    (1 << 3)
+#define SEG32_MODE32_DS    (2 << 3)
+#define SEG32_MODE16_CS    (3 << 3)
+#define SEG32_MODE16_DS    (4 << 3)
+#define SEG32_MODE16BIG_CS (5 << 3)
+#define SEG32_MODE16BIG_DS (6 << 3)
+
+// Debugging levels.  If non-zero and CONFIG_DEBUG_LEVEL is greater
+// than the specified value, then the corresponding irq handler will
+// report every enter event.
+#define DEBUG_ISR_02 1
+#define DEBUG_HDL_05 1
+#define DEBUG_ISR_08 20
+#define DEBUG_ISR_09 9
+#define DEBUG_ISR_0e 9
+#define DEBUG_HDL_10 20
+#define DEBUG_HDL_11 2
+#define DEBUG_HDL_12 2
+#define DEBUG_HDL_13 10
+#define DEBUG_HDL_14 2
+#define DEBUG_HDL_15 9
+#define DEBUG_HDL_16 9
+#define DEBUG_HDL_17 2
+#define DEBUG_HDL_18 1
+#define DEBUG_HDL_19 1
+#define DEBUG_HDL_1a 9
+#define DEBUG_HDL_40 1
+#define DEBUG_ISR_70 9
+#define DEBUG_ISR_74 9
+#define DEBUG_ISR_75 1
+#define DEBUG_ISR_76 10
+#define DEBUG_ISR_hwpic1 5
+#define DEBUG_ISR_hwpic2 5
+#define DEBUG_HDL_smi 9
+#define DEBUG_HDL_smp 1
+#define DEBUG_HDL_pnp 1
+#define DEBUG_HDL_pmm 1
+#define DEBUG_HDL_pcibios 9
+#define DEBUG_HDL_apm 9
+
+#define DEBUG_unimplemented 2
+#define DEBUG_invalid 3
+#define DEBUG_thread 2
+
+#endif // config.h