Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / qemu-palcode / ioport.h

diff --git a/qemu/roms/qemu-palcode/ioport.h b/qemu/roms/qemu-palcode/ioport.h
new file mode 100644 (file)
index 0000000..b1bb4b3
--- /dev/null
+++ b/qemu/roms/qemu-palcode/ioport.h
@@ -0,0 +1,84 @@
+// Definitions for X86 IO port access.
+//
+// Copyright (C) 2008  Kevin O'Connor <kevin@koconnor.net>
+//
+// This file may be distributed under the terms of the GNU LGPLv3 license.
+//
+// This file copied (somewhat) intact from SeaBIOS.
+
+#ifndef IOPORT_H
+#define IOPORT_H
+
+#define PORT_DMA_ADDR_2        0x0004
+#define PORT_DMA_CNT_2         0x0005
+#define PORT_DMA1_MASK_REG     0x000a
+#define PORT_DMA1_MODE_REG     0x000b
+#define PORT_DMA1_CLEAR_FF_REG 0x000c
+#define PORT_DMA1_MASTER_CLEAR 0x000d
+#define PORT_PIC1_CMD          0x0020
+#define PORT_PIC1_DATA         0x0021
+#define PORT_PIT_COUNTER0      0x0040
+#define PORT_PIT_COUNTER1      0x0041
+#define PORT_PIT_COUNTER2      0x0042
+#define PORT_PIT_MODE          0x0043
+#define PORT_PS2_DATA          0x0060
+#define PORT_PS2_CTRLB         0x0061
+#define PORT_PS2_STATUS        0x0064
+#define PORT_CMOS_INDEX        0x0070
+#define PORT_CMOS_DATA         0x0071
+#define PORT_DIAG              0x0080
+#define PORT_DMA_PAGE_2        0x0081
+#define PORT_A20               0x0092
+#define PORT_PIC2_CMD          0x00a0
+#define PORT_PIC2_DATA         0x00a1
+#define PORT_SMI_CMD           0x00b2
+#define PORT_SMI_STATUS        0x00b3
+#define PORT_DMA2_MASK_REG     0x00d4
+#define PORT_DMA2_MODE_REG     0x00d6
+#define PORT_DMA2_MASTER_CLEAR 0x00da
+#define PORT_MATH_CLEAR        0x00f0
+#define PORT_ATA2_CMD_BASE     0x0170
+#define PORT_ATA1_CMD_BASE     0x01f0
+#define PORT_LPT2              0x0278
+#define PORT_SERIAL4           0x02e8
+#define PORT_SERIAL2           0x02f8
+#define PORT_ATA2_CTRL_BASE    0x0374
+#define PORT_LPT1              0x0378
+#define PORT_SERIAL3           0x03e8
+#define PORT_ATA1_CTRL_BASE    0x03f4
+#define PORT_FD_BASE           0x03f0
+#define PORT_FD_DOR            0x03f2
+#define PORT_FD_STATUS         0x03f4
+#define PORT_FD_DATA           0x03f5
+#define PORT_HD_DATA           0x03f6
+#define PORT_FD_DIR            0x03f7
+#define PORT_SERIAL1           0x03f8
+#define PORT_PIC1_ELCR         0x04d0
+#define PORT_PIC2_ELCR         0x04d1
+#define PORT_PCI_CMD           0x0cf8
+#define PORT_PCI_REBOOT        0x0cf9
+#define PORT_PCI_DATA          0x0cfc
+#define PORT_BIOS_DEBUG        0x0402
+#define PORT_QEMU_CFG_CTL      0x0510
+#define PORT_QEMU_CFG_DATA     0x0511
+#define PORT_ACPI_PM_BASE      0xb000
+#define PORT_SMB_BASE          0xb100
+#define PORT_BIOS_APM          0x8900
+
+// Serial port offsets
+#define SEROFF_DATA    0
+#define SEROFF_DLL     0
+#define SEROFF_IER     1
+#define SEROFF_DLH     1
+#define SEROFF_IIR     2
+#define SEROFF_LCR     3
+#define SEROFF_LSR     5
+#define SEROFF_MSR     6
+
+// PORT_A20 bitdefs
+#define A20_ENABLE_BIT 0x02
+
+// PORT_CMOS_INDEX nmi disable bit
+#define NMI_DISABLE_BIT 0x80
+
+#endif // ioport.h