--- /dev/null
+#ifndef LINUXBIOS_TABLES_H
+#define LINUXBIOS_TABLES_H
+
+/* The linuxbios table information is for conveying information
+ * from the firmware to the loaded OS image. Primarily this
+ * is expected to be information that cannot be discovered by
+ * other means, such as quering the hardware directly.
+ *
+ * All of the information should be Position Independent Data.
+ * That is it should be safe to relocated any of the information
+ * without it's meaning/correctnes changing. For table that
+ * can reasonably be used on multiple architectures the data
+ * size should be fixed. This should ease the transition between
+ * 32 bit and 64 bit architectures etc.
+ *
+ * The completeness test for the information in this table is:
+ * - Can all of the hardware be detected?
+ * - Are the per motherboard constants available?
+ * - Is there enough to allow a kernel to run that was written before
+ * a particular motherboard is constructed? (Assuming the kernel
+ * has drivers for all of the hardware but it does not have
+ * assumptions on how the hardware is connected together).
+ *
+ * With this test it should be straight forward to determine if a
+ * table entry is required or not. This should remove much of the
+ * long term compatibility burden as table entries which are
+ * irrelevant or have been replaced by better alternatives may be
+ * dropped. Of course it is polite and expidite to include extra
+ * table entries and be backwards compatible, but it is not required.
+ */
+
+
+struct lb_header
+{
+ uint8_t signature[4]; /* LBIO */
+ uint32_t header_bytes;
+ uint32_t header_checksum;
+ uint32_t table_bytes;
+ uint32_t table_checksum;
+ uint32_t table_entries;
+};
+
+/* Every entry in the boot enviroment list will correspond to a boot
+ * info record. Encoding both type and size. The type is obviously
+ * so you can tell what it is. The size allows you to skip that
+ * boot enviroment record if you don't know what it easy. This allows
+ * forward compatibility with records not yet defined.
+ */
+struct lb_record {
+ uint32_t tag; /* tag ID */
+ uint32_t size; /* size of record (in bytes) */
+};
+
+#define LB_TAG_UNUSED 0x0000
+
+#define LB_TAG_MEMORY 0x0001
+
+struct lb_memory_range {
+ uint64_t start;
+ uint64_t size;
+ uint32_t type;
+#define LB_MEM_RAM 1 /* Memory anyone can use */
+#define LB_MEM_RESERVED 2 /* Don't use this memory region */
+#define LB_MEM_TABLE 16 /* Ram configuration tables are kept in */
+
+};
+
+struct lb_memory {
+ uint32_t tag;
+ uint32_t size;
+ struct lb_memory_range map[0];
+};
+
+#define LB_TAG_HWRPB 0x0002
+struct lb_hwrpb {
+ uint32_t tag;
+ uint32_t size;
+ uint64_t hwrpb;
+};
+
+#define LB_TAG_MAINBOARD 0x0003
+struct lb_mainboard {
+ uint32_t tag;
+ uint32_t size;
+ uint8_t vendor_idx;
+ uint8_t part_number_idx;
+ uint8_t strings[0];
+};
+
+#define LB_TAG_VERSION 0x0004
+#define LB_TAG_EXTRA_VERSION 0x0005
+#define LB_TAG_BUILD 0x0006
+#define LB_TAG_COMPILE_TIME 0x0007
+#define LB_TAG_COMPILE_BY 0x0008
+#define LB_TAG_COMPILE_HOST 0x0009
+#define LB_TAG_COMPILE_DOMAIN 0x000a
+#define LB_TAG_COMPILER 0x000b
+#define LB_TAG_LINKER 0x000c
+#define LB_TAG_ASSEMBLER 0x000d
+struct lb_string {
+ uint32_t tag;
+ uint32_t size;
+ uint8_t string[0];
+};
+
+/* The following structures are for the cmos definitions table */
+#define LB_TAG_CMOS_OPTION_TABLE 200
+/* cmos header record */
+struct cmos_option_table {
+ uint32_t tag; /* CMOS definitions table type */
+ uint32_t size; /* size of the entire table */
+ uint32_t header_length; /* length of header */
+};
+
+/* cmos entry record
+ This record is variable length. The name field may be
+ shorter than CMOS_MAX_NAME_LENGTH. The entry may start
+ anywhere in the byte, but can not span bytes unless it
+ starts at the beginning of the byte and the length is
+ fills complete bytes.
+*/
+#define LB_TAG_OPTION 201
+struct cmos_entries {
+ uint32_t tag; /* entry type */
+ uint32_t size; /* length of this record */
+ uint32_t bit; /* starting bit from start of image */
+ uint32_t length; /* length of field in bits */
+ uint32_t config; /* e=enumeration, h=hex, r=reserved */
+ uint32_t config_id; /* a number linking to an enumeration record */
+#define CMOS_MAX_NAME_LENGTH 32
+ uint8_t name[CMOS_MAX_NAME_LENGTH]; /* name of entry in ascii,
+ variable length int aligned */
+};
+
+
+/* cmos enumerations record
+ This record is variable length. The text field may be
+ shorter than CMOS_MAX_TEXT_LENGTH.
+*/
+#define LB_TAG_OPTION_ENUM 202
+struct cmos_enums {
+ uint32_t tag; /* enumeration type */
+ uint32_t size; /* length of this record */
+ uint32_t config_id; /* a number identifying the config id */
+ uint32_t value; /* the value associated with the text */
+#define CMOS_MAX_TEXT_LENGTH 32
+ uint8_t text[CMOS_MAX_TEXT_LENGTH]; /* enum description in ascii,
+ variable length int aligned */
+};
+
+/* cmos defaults record
+ This record contains default settings for the cmos ram.
+*/
+#define LB_TAG_OPTION_DEFAULTS 203
+struct cmos_defaults {
+ uint32_t tag; /* default type */
+ uint32_t size; /* length of this record */
+ uint32_t name_length; /* length of the following name field */
+ uint8_t name[CMOS_MAX_NAME_LENGTH]; /* name identifying the default */
+#define CMOS_IMAGE_BUFFER_SIZE 128
+ uint8_t default_set[CMOS_IMAGE_BUFFER_SIZE]; /* default settings */
+};
+
+#define LB_TAG_OPTION_CHECKSUM 204
+struct cmos_checksum {
+ uint32_t tag;
+ uint32_t size;
+ /* In practice everything is byte aligned, but things are measured
+ * in bits to be consistent.
+ */
+ uint32_t range_start; /* First bit that is checksummed (byte aligned) */
+ uint32_t range_end; /* Last bit that is checksummed (byte aligned) */
+ uint32_t location; /* First bit of the checksum (byte aligned) */
+ uint32_t type; /* Checksum algorithm that is used */
+#define CHECKSUM_NONE 0
+#define CHECKSUM_PCBIOS 1
+};
+
+
+
+#endif /* LINUXBIOS_TABLES_H */
Code Review / kvmfornfv.git / blobdiff