--- /dev/null
+#!/bin/sh
+
+#
+# MOLPATH is needed if you want to build openbios-mol.elf
+#
+MOLPATH=$HOME/mol-0.9.71
+
+if [ x"$1" = x -o "$1" = "-help" ]; then
+ printf "Usage:\n $0 [arch-config]...\n"
+ printf "arch-config values supported for native or cross compiled builds:\n"
+ printf " amd64, ppc, sparc32, sparc64, x86\n\n"
+ printf "Add \"unix-\" prefix to compile openbios-unix executable (native only)\n"
+ printf "Add \"builtin-\" prefix to compile openbios-builtin executables\n\n"
+ printf "Without prefixes, builtin and unix targets are selected\n\n"
+ printf "Special targets: mol-ppc briq-ppc pearpc-ppc qemu-ppc qemu-ppc64 xbox-x86\n\n"
+ printf "Example: $0 builtin-sparc32 unix-amd64 builtin-amd64\n"
+ exit 0
+fi
+
+crosscflags()
+{
+ host=$1
+ target=$2
+
+ if test "$host" = "powerpc" -o "$host" = "ppc" \
+ -o "$host" = "mips" -o "$host" = "s390" \
+ -o "$host" = "sparc32" -o "$host" = "sparc64" \
+ -o "$host" = "m68k" -o "$host" = "armv4b"; then
+ hostbigendian="yes"
+ else
+ hostbigendian="no"
+ fi
+
+# host long bits test
+ if test "$host" = "sparc64" -o "$host" = "ia64" \
+ -o "$host" = "amd64" -o "$host" = "x86_64" \
+ -o "$host" = "alpha"; then
+ hostlongbits="64"
+ else
+ hostlongbits="32"
+ fi
+
+ if test "$target" = "powerpc" -o "$target" = "ppc" \
+ -o "$target" = "powerpc64" -o "$target" = "ppc64" \
+ -o "$target" = "mips" -o "$target" = "s390" \
+ -o "$target" = "sparc32" -o "$target" = "sparc64" \
+ -o "$target" = "m68k" -o "$target" = "armv4b"; then
+ targetbigendian="yes"
+ else
+ targetbigendian="no"
+ fi
+
+# target long bits test
+ if test "$target" = "sparc64" -o "$target" = "ia64" \
+ -o "$target" = "amd64" -o "$target" = "x86_64" \
+ -o "$target" = "powerpc64" -o "$target" = "ppc64" \
+ -o "$target" = "alpha"; then
+ targetlongbits="64"
+ else
+ targetlongbits="32"
+ fi
+
+ if test "$targetbigendian" = "$hostbigendian"; then
+ cflags="-USWAP_ENDIANNESS"
+ else
+ cflags="-DSWAP_ENDIANNESS"
+ fi
+
+ if test "$targetlongbits" = "$hostlongbits"; then
+ cflags="$cflags -DNATIVE_BITWIDTH_EQUALS_HOST_BITWIDTH"
+ elif test "$targetlongbits" -lt "$hostlongbits"; then
+ cflags="$cflags -DNATIVE_BITWIDTH_SMALLER_THAN_HOST_BITWIDTH"
+ else
+ cflags="$cflags -DNATIVE_BITWIDTH_LARGER_THAN_HOST_BITWIDTH"
+ fi
+
+ if test "$target" = "sparc64" -o "$target" = "ia64" \
+ -o "$target" = "amd64" -o "$target" = "x86_64" \
+ -o "$target" = "alpha"; then
+ if test "$host" = "x86"; then
+ cflags="$cflags -DNEED_FAKE_INT128_T"
+ elif test "$host" = "arm"; then
+ cflags="$cflags -DNEED_FAKE_INT128_T"
+ elif test "$host" = "ppc" -a `uname -s` = "Darwin"; then
+ cflags="$cflags -DNEED_FAKE_INT128_T"
+ fi
+ fi
+
+ CROSSCFLAGS=$cflags
+}
+
+archname()
+{
+ HOSTARCH=`uname -m | sed -e s/i.86/x86/ -e s/i86pc/x86/ \
+ -e s/sun4u/sparc64/ -e s/sparc$/sparc32/ \
+ -e s/arm.*/arm/ -e s/sa110/arm/ -e s/x86_64/amd64/ \
+ -e "s/Power Macintosh/ppc/"`
+}
+
+select_prefix()
+{
+ TARGETS="${1}-unknown-linux-gnu- ${1}-linux-gnu- ${1}-linux- ${1}-elf- ${1}-eabi-"
+
+ if [ x"$CROSS_COMPILE" != "x" ]; then
+ TARGETS=$CROSS_COMPILE
+ fi
+
+ for TARGET in $TARGETS
+ do
+ if type ${TARGET}gcc > /dev/null 2>&1
+ then
+ return
+ fi
+ done
+ if [ "$ARCH" = "$HOSTARCH" ]; then
+ return
+ fi
+ echo "ERROR: no ${1} cross-compiler found !" 1>&2
+ exit 1
+}
+
+config_set_boolean()
+{
+ option=`echo $1 | tr a-z A-Z`
+ echo "<option name=\"$option\" type=\"boolean\" value=\"true\" />"
+}
+
+exists()
+{
+ type "$1" >/dev/null 2>&1
+}
+
+
+SRCDIR=`dirname "$0"`/../..
+BUILDDIR=`pwd`
+
+# make source path absolute
+SRCDIR=`cd "$SRCDIR"; pwd`
+
+if test "x$HOSTARCH" = "x"; then
+ archname
+fi
+
+VERSION=`head $SRCDIR/VERSION`
+
+echo "Configuring OpenBIOS on $HOSTARCH for $*"
+
+if exists toke; then
+ :
+else
+ echo "Unable to locate toke executable from the fcode-utils package - aborting"
+ exit 1
+fi
+
+target_list=""
+for target in $*; do
+ case $target in
+ unix-*|builtin-*|plain-*|mol-ppc|briq-ppc|pearpc-ppc|qemu-ppc|qemu-ppc64|xbox-x86)
+ target_list="$target_list $target"
+ ;;
+ cross-*)
+ echo "\"cross-\" prefix is no longer needed"
+ target=`echo $target | sed s/cross-//g`
+ target_list="$target_list builtin-$target"
+ ;;
+ *)
+ #default: build builtin and if possible, unix target
+ target_list="$target_list builtin-$target unix-$target"
+ ;;
+ esac
+done
+
+arch_list=""
+for target in $target_list; do
+ arch=`echo $target | sed s/.*-//g`
+ if ! test -f $SRCDIR/config/examples/${arch}_config.xml; then
+ echo "Cannot find $SRCDIR/config/examples/${arch}_config.xml" >&2
+ exit 1
+ fi
+ if ! echo $arch_list | grep -q "$arch"; then
+ arch_list="$arch_list $arch"
+ fi
+done
+
+for ARCH in $arch_list; do
+ unix="no"
+ builtin="no"
+ plain="no"
+ mol="no"
+ briq="no"
+ pearpc="no"
+ qemu="no"
+ xbox="no"
+ cross="no"
+
+ for target in $target_list; do
+ case $target in
+ *-$ARCH)
+ :
+ ;;
+ *)
+ continue
+ ;;
+ esac
+ case $target in
+ mol-ppc)
+ mol="yes"
+ ;;
+ briq-ppc)
+ briq="yes"
+ ;;
+ pearpc-ppc)
+ pearpc="yes"
+ ;;
+ builtin-ppc|qemu-ppc|builtin-ppc64|qemu-ppc64)
+ qemu="yes"
+ ;;
+ xbox-x86)
+ xbox="yes"
+ ;;
+ builtin-sparc32)
+ builtin="yes"
+ qemu="yes"
+ ;;
+ builtin-sparc64)
+ builtin="yes"
+ qemu="yes"
+ ;;
+ unix-*)
+ if [ "$ARCH" != "$HOSTARCH" ]; then
+ # Can't cross compile Unix target
+ continue
+ fi
+ unix="yes"
+ ;;
+ builtin-*)
+ builtin="yes"
+ ;;
+ plain-*)
+ plain="yes"
+ ;;
+ esac
+ done
+
+ BASEARCH=$ARCH
+ case $ARCH in
+ amd64)
+ select_prefix x86_64
+ CFLAGS="-fno-builtin"
+ AS_FLAGS=
+ ;;
+
+ ppc)
+ select_prefix powerpc
+ if [ "$unix" = "no" ]; then
+ CFLAGS="-m32 -msoft-float -fno-builtin-bcopy -fno-builtin-log2"
+ AS_FLAGS="-m32"
+ else
+ CFLAGS="-fno-builtin"
+ AS_FLAGS=
+ fi
+ ;;
+
+ ppc64)
+ select_prefix powerpc64
+ CFLAGS="-Wa,-a64 -m64 -msoft-float -fno-builtin"
+ AS_FLAGS="-Wa,-a64"
+ BASEARCH=ppc
+ ;;
+
+ sparc32)
+ select_prefix sparc
+ CFLAGS="-Wa,-xarch=v8 -Wa,-32 -m32 -mcpu=supersparc -fno-builtin"
+ AS_FLAGS="-Wa,-xarch=v8 -Wa,-32"
+ ;;
+
+ sparc64)
+ select_prefix sparc64
+ CFLAGS="-Wa,-xarch=v9b -Wa,-64 -m64 -mcpu=ultrasparc -mcmodel=medany -fno-builtin"
+ AS_FLAGS="-Wa,-xarch=v9b -Wa,-64"
+ ;;
+
+ x86)
+ select_prefix i486
+ CFLAGS="-fno-builtin -m32"
+ AS_FLAGS="-Wa,-32"
+ ;;
+ esac
+ if [ "$ARCH" != "$HOSTARCH" -o `uname -s` = "Darwin" ]; then
+ cross="yes"
+ fi
+ crosscflags $HOSTARCH $ARCH
+ OBJDIR=$BUILDDIR/obj-$ARCH
+ ODIRS="$ODIRS $OBJDIR"
+
+ printf "Initializing build tree $OBJDIR..."
+ rm -rf "$OBJDIR"
+ mkdir "$OBJDIR"
+ mkdir -p $OBJDIR/target
+ mkdir -p $OBJDIR/target/include
+ mkdir -p $OBJDIR/target/arch
+ mkdir -p $OBJDIR/target/arch/unix
+ mkdir -p $OBJDIR/target/arch/$ARCH
+ mkdir -p $OBJDIR/target/libgcc
+ mkdir -p $OBJDIR/target/kernel
+ mkdir -p $OBJDIR/target/libopenbios
+ mkdir -p $OBJDIR/target/packages
+ mkdir -p $OBJDIR/target/fs
+ mkdir -p $OBJDIR/target/fs/grubfs
+ mkdir -p $OBJDIR/target/fs/hfs
+ mkdir -p $OBJDIR/target/fs/hfsplus
+ mkdir -p $OBJDIR/target/fs/iso9660
+ mkdir -p $OBJDIR/target/fs/ext2
+ mkdir -p $OBJDIR/target/drivers
+ mkdir -p $OBJDIR/target/libc
+ mkdir -p $OBJDIR/host/include
+ mkdir -p $OBJDIR/host/kernel
+ mkdir -p $OBJDIR/forth
+ ln -s $SRCDIR/include/arch/$BASEARCH $OBJDIR/target/include/asm
+ #compile the host binary with target settings instead
+ #ln -s $SRCDIR/include/arch/$HOSTARCH $OBJDIR/host/include/asm
+ if [ "$mol" = "yes" ]; then
+ printf "\nUsing MOL path $MOLPATH...\n"
+ mkdir -p $OBJDIR/target/arch/ppc/mol
+ ln -s $MOLPATH/src/shared/osi_calls.h $OBJDIR/target/include/
+ ln -s $MOLPATH/src/shared/osi.h $OBJDIR/target/include/
+ ln -s $MOLPATH/src/shared/prom.h $OBJDIR/target/include/
+ ln -s $MOLPATH/src/include/boothelper_sh.h $OBJDIR/target/include/
+ ln -s $MOLPATH/src/include/video_sh.h $OBJDIR/target/include/
+ ln -s $MOLPATH/src/include/pseudofs_sh.h $OBJDIR/target/include/
+ ln -s $MOLPATH/src/include/kbd_sh.h $OBJDIR/target/include/
+ ln -s $MOLPATH/src/drivers/disk/include/scsi_sh.h $OBJDIR/target/include/
+ ln -s $MOLPATH/src/drivers/disk/include/ablk_sh.h $OBJDIR/target/include/
+ fi
+ if [ "$briq" = "yes" ]; then
+ mkdir -p $OBJDIR/target/arch/ppc/briq
+ fi
+ if [ "$pearpc" = "yes" ]; then
+ mkdir -p $OBJDIR/target/arch/ppc/pearpc
+ fi
+ if [ "$qemu" = "yes" ]; then
+ mkdir -p $OBJDIR/target/arch/ppc/qemu
+ fi
+ if [ "$xbox" = "yes" ]; then
+ mkdir -p $OBJDIR/target/arch/x86/xbox
+ fi
+ echo "ok."
+
+ ODIR=$OBJDIR
+
+ printf "Creating target config.mak..."
+ echo "ARCH=$ARCH" > $ODIR/config.mak
+ if [ "$cross" = "yes" ]; then
+ echo "TARGET=$TARGET" >> $ODIR/config.mak
+ fi
+ echo "CFLAGS=$CFLAGS" >> $ODIR/config.mak
+ echo "AS_FLAGS=$AS_FLAGS" >> $ODIR/config.mak
+ echo "HOSTARCH?=$HOSTARCH" >> $ODIR/config.mak
+ echo "CROSSCFLAGS=$CROSSCFLAGS" >> $ODIR/config.mak
+ echo "VERSION=\"$VERSION\"" >> $ODIR/config.mak
+ echo "SRCDIR=$SRCDIR" >> $ODIR/config.mak
+ echo "ok."
+
+ printf "Creating target rules.mak..."
+ ln -s $SRCDIR/config/xml/rules.xml $ODIR/rules.xml
+ echo "<?xml version=\"1.0\"?><config>" > $ODIR/config.xml
+ # Generic
+ config_set_boolean CONFIG_$ARCH >> $ODIR/config.xml
+ if [ "$BASEARCH" != "$ARCH" ]; then
+ config_set_boolean CONFIG_$BASEARCH >> $ODIR/config.xml
+ fi
+ if [ "$mol" = "yes" ]; then
+ config_set_boolean CONFIG_MOL >> $ODIR/config.xml
+ fi
+ if [ "$briq" = "yes" ]; then
+ config_set_boolean CONFIG_BRIQ >> $ODIR/config.xml
+ fi
+ if [ "$pearpc" = "yes" ]; then
+ config_set_boolean CONFIG_PEARPC >> $ODIR/config.xml
+ fi
+ if [ "$qemu" = "yes" ]; then
+ config_set_boolean CONFIG_QEMU >> $ODIR/config.xml
+ fi
+ if [ "$xbox" = "yes" ]; then
+ config_set_boolean CONFIG_XBOX >> $ODIR/config.xml
+ fi
+ if [ "$targetbigendian" = "yes" ]; then
+ config_set_boolean CONFIG_BIG_ENDIAN >> $ODIR/config.xml
+ else
+ config_set_boolean CONFIG_LITTLE_ENDIAN >> $ODIR/config.xml
+ fi
+ # Kernel binaries
+ if [ "$plain" = "yes" ]; then
+ config_set_boolean CONFIG_IMAGE_ELF >> $ODIR/config.xml
+ fi
+ if [ "$builtin" = "yes" ]; then
+ config_set_boolean CONFIG_IMAGE_ELF_EMBEDDED >> $ODIR/config.xml
+ fi
+ # Build hosted Unix binary?
+ if [ "$unix" = "yes" ]; then
+ config_set_boolean CONFIG_HOST_UNIX >> $ODIR/config.xml
+ #config_set_boolean CONFIG_UNIX_QT >> $ODIR/config.xml
+ #config_set_boolean CONFIG_PLUGINS >> $ODIR/config.xml
+ fi
+ cat $SRCDIR/config/examples/${ARCH}_config.xml >> $ODIR/config.xml
+
+ cd $ODIR
+ echo "</config>" >> $ODIR/config.xml
+ ln -s $SRCDIR/Makefile.target $ODIR/Makefile
+ xsltproc $SRCDIR/config/xml/xinclude.xsl $SRCDIR/build.xml > $ODIR/build-full.xml
+ xsltproc $SRCDIR/config/xml/makefile.xsl $ODIR/build-full.xml > $ODIR/rules.mak
+ echo "ok."
+ printf "Creating config files..."
+ xsltproc $SRCDIR/config/xml/config-c.xsl $ODIR/config.xml > $ODIR/host/include/autoconf.h
+ xsltproc $SRCDIR/config/xml/config-c.xsl $ODIR/config.xml > $ODIR/target/include/autoconf.h
+ xsltproc $SRCDIR/config/xml/config-forth.xsl $ODIR/config.xml > $ODIR/forth/config.fs
+ echo "ok."
+
+ cd $BUILDDIR
+done
+
+if [ "$SRCDIR" != "$BUILDDIR" ]; then
+ ln -s $SRCDIR/Makefile $BUILDDIR
+fi
+
+echo "ODIRS=$ODIRS" >> $BUILDDIR/config-host.mak
+echo "TARGETS=$arch_list" >> $BUILDDIR/config-host.mak
Code Review / kvmfornfv.git / blobdiff