--- /dev/null
+/*
+ * The iPXE 802.11 MAC layer.
+ *
+ * Copyright (c) 2009 Joshua Oreman <oremanj@rwcr.net>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+FILE_LICENCE ( GPL2_OR_LATER );
+
+#include <string.h>
+#include <byteswap.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <ipxe/settings.h>
+#include <ipxe/if_arp.h>
+#include <ipxe/ethernet.h>
+#include <ipxe/ieee80211.h>
+#include <ipxe/netdevice.h>
+#include <ipxe/net80211.h>
+#include <ipxe/sec80211.h>
+#include <ipxe/timer.h>
+#include <ipxe/nap.h>
+#include <ipxe/errortab.h>
+#include <ipxe/net80211_err.h>
+
+/** @file
+ *
+ * 802.11 device management
+ */
+
+/** List of 802.11 devices */
+static struct list_head net80211_devices = LIST_HEAD_INIT ( net80211_devices );
+
+/** Set of device operations that does nothing */
+static struct net80211_device_operations net80211_null_ops;
+
+/** Information associated with a received management packet
+ *
+ * This is used to keep beacon signal strengths in a parallel queue to
+ * the beacons themselves.
+ */
+struct net80211_rx_info {
+ int signal;
+ struct list_head list;
+};
+
+/** Context for a probe operation */
+struct net80211_probe_ctx {
+ /** 802.11 device to probe on */
+ struct net80211_device *dev;
+
+ /** Value of keep_mgmt before probe was started */
+ int old_keep_mgmt;
+
+ /** If scanning actively, pointer to probe packet to send */
+ struct io_buffer *probe;
+
+ /** If non-"", the ESSID to limit ourselves to */
+ const char *essid;
+
+ /** Time probe was started */
+ u32 ticks_start;
+
+ /** Time last useful beacon was received */
+ u32 ticks_beacon;
+
+ /** Time channel was last changed */
+ u32 ticks_channel;
+
+ /** Time to stay on each channel */
+ u32 hop_time;
+
+ /** Channels to hop by when changing channel */
+ int hop_step;
+
+ /** List of best beacons for each network found so far */
+ struct list_head *beacons;
+};
+
+/** Context for the association task */
+struct net80211_assoc_ctx {
+ /** Next authentication method to try using */
+ int method;
+
+ /** Time (in ticks) of the last sent association-related packet */
+ int last_packet;
+
+ /** Number of times we have tried sending it */
+ int times_tried;
+};
+
+/**
+ * Detect secure 802.11 network when security support is not available
+ *
+ * @return -ENOTSUP, always.
+ */
+__weak int sec80211_detect ( struct io_buffer *iob __unused,
+ enum net80211_security_proto *secprot __unused,
+ enum net80211_crypto_alg *crypt __unused ) {
+ return -ENOTSUP;
+}
+
+/**
+ * @defgroup net80211_netdev Network device interface functions
+ * @{
+ */
+static int net80211_netdev_open ( struct net_device *netdev );
+static void net80211_netdev_close ( struct net_device *netdev );
+static int net80211_netdev_transmit ( struct net_device *netdev,
+ struct io_buffer *iobuf );
+static void net80211_netdev_poll ( struct net_device *netdev );
+static void net80211_netdev_irq ( struct net_device *netdev, int enable );
+/** @} */
+
+/**
+ * @defgroup net80211_linklayer 802.11 link-layer protocol functions
+ * @{
+ */
+static int net80211_ll_push ( struct net_device *netdev,
+ struct io_buffer *iobuf, const void *ll_dest,
+ const void *ll_source, uint16_t net_proto );
+static int net80211_ll_pull ( struct net_device *netdev,
+ struct io_buffer *iobuf, const void **ll_dest,
+ const void **ll_source, uint16_t * net_proto,
+ unsigned int *flags );
+/** @} */
+
+/**
+ * @defgroup net80211_help 802.11 helper functions
+ * @{
+ */
+static void net80211_add_channels ( struct net80211_device *dev, int start,
+ int len, int txpower );
+static void net80211_filter_hw_channels ( struct net80211_device *dev );
+static void net80211_set_rtscts_rate ( struct net80211_device *dev );
+static int net80211_process_capab ( struct net80211_device *dev,
+ u16 capab );
+static int net80211_process_ie ( struct net80211_device *dev,
+ union ieee80211_ie *ie, void *ie_end );
+static union ieee80211_ie *
+net80211_marshal_request_info ( struct net80211_device *dev,
+ union ieee80211_ie *ie );
+/** @} */
+
+/**
+ * @defgroup net80211_assoc_ll 802.11 association handling functions
+ * @{
+ */
+static void net80211_step_associate ( struct net80211_device *dev );
+static void net80211_handle_auth ( struct net80211_device *dev,
+ struct io_buffer *iob );
+static void net80211_handle_assoc_reply ( struct net80211_device *dev,
+ struct io_buffer *iob );
+static int net80211_send_disassoc ( struct net80211_device *dev, int reason,
+ int deauth );
+static void net80211_handle_mgmt ( struct net80211_device *dev,
+ struct io_buffer *iob, int signal );
+/** @} */
+
+/**
+ * @defgroup net80211_frag 802.11 fragment handling functions
+ * @{
+ */
+static void net80211_free_frags ( struct net80211_device *dev, int fcid );
+static struct io_buffer *net80211_accum_frags ( struct net80211_device *dev,
+ int fcid, int nfrags, int size );
+static void net80211_rx_frag ( struct net80211_device *dev,
+ struct io_buffer *iob, int signal );
+/** @} */
+
+/**
+ * @defgroup net80211_settings 802.11 settings handlers
+ * @{
+ */
+static int net80211_check_settings_update ( void );
+
+/** 802.11 settings applicator
+ *
+ * When the SSID is changed, this will cause any open devices to
+ * re-associate; when the encryption key is changed, we similarly
+ * update their state.
+ */
+struct settings_applicator net80211_applicator __settings_applicator = {
+ .apply = net80211_check_settings_update,
+};
+
+/** The network name to associate with
+ *
+ * If this is blank, we scan for all networks and use the one with the
+ * greatest signal strength.
+ */
+const struct setting net80211_ssid_setting __setting ( SETTING_NETDEV_EXTRA,
+ ssid ) = {
+ .name = "ssid",
+ .description = "Wireless SSID",
+ .type = &setting_type_string,
+};
+
+/** Whether to use active scanning
+ *
+ * In order to associate with a hidden SSID, it's necessary to use an
+ * active scan (send probe packets). If this setting is nonzero, an
+ * active scan on the 2.4GHz band will be used to associate.
+ */
+const struct setting net80211_active_setting __setting ( SETTING_NETDEV_EXTRA,
+ active-scan ) = {
+ .name = "active-scan",
+ .description = "Actively scan for wireless networks",
+ .type = &setting_type_int8,
+};
+
+/** The cryptographic key to use
+ *
+ * For hex WEP keys, as is common, this must be entered using the
+ * normal iPXE method for entering hex settings; an ASCII string of
+ * hex characters will not behave as expected.
+ */
+const struct setting net80211_key_setting __setting ( SETTING_NETDEV_EXTRA,
+ key ) = {
+ .name = "key",
+ .description = "Wireless encryption key",
+ .type = &setting_type_string,
+};
+
+/** @} */
+
+
+/* ---------- net_device wrapper ---------- */
+
+/**
+ * Open 802.11 device and start association
+ *
+ * @v netdev Wrapping network device
+ * @ret rc Return status code
+ *
+ * This sets up a default conservative set of channels for probing,
+ * and starts the auto-association task unless the @c
+ * NET80211_NO_ASSOC flag is set in the wrapped 802.11 device's @c
+ * state field.
+ */
+static int net80211_netdev_open ( struct net_device *netdev )
+{
+ struct net80211_device *dev = netdev->priv;
+ int rc = 0;
+
+ if ( dev->op == &net80211_null_ops )
+ return -EFAULT;
+
+ if ( dev->op->open )
+ rc = dev->op->open ( dev );
+
+ if ( rc < 0 )
+ return rc;
+
+ if ( ! ( dev->state & NET80211_NO_ASSOC ) )
+ net80211_autoassociate ( dev );
+
+ return 0;
+}
+
+/**
+ * Close 802.11 device
+ *
+ * @v netdev Wrapping network device.
+ *
+ * If the association task is running, this will stop it.
+ */
+static void net80211_netdev_close ( struct net_device *netdev )
+{
+ struct net80211_device *dev = netdev->priv;
+
+ if ( dev->state & NET80211_WORKING )
+ process_del ( &dev->proc_assoc );
+
+ /* Send disassociation frame to AP, to be polite */
+ if ( dev->state & NET80211_ASSOCIATED )
+ net80211_send_disassoc ( dev, IEEE80211_REASON_LEAVING, 0 );
+
+ if ( dev->handshaker && dev->handshaker->stop &&
+ dev->handshaker->started )
+ dev->handshaker->stop ( dev );
+
+ free ( dev->crypto );
+ free ( dev->handshaker );
+ dev->crypto = NULL;
+ dev->handshaker = NULL;
+
+ netdev_link_down ( netdev );
+ dev->state = 0;
+
+ if ( dev->op->close )
+ dev->op->close ( dev );
+}
+
+/**
+ * Transmit packet on 802.11 device
+ *
+ * @v netdev Wrapping network device
+ * @v iobuf I/O buffer
+ * @ret rc Return status code
+ *
+ * If encryption is enabled for the currently associated network, the
+ * packet will be encrypted prior to transmission.
+ */
+static int net80211_netdev_transmit ( struct net_device *netdev,
+ struct io_buffer *iobuf )
+{
+ struct net80211_device *dev = netdev->priv;
+ struct ieee80211_frame *hdr = iobuf->data;
+ int rc = -ENOSYS;
+
+ if ( dev->crypto && ! ( hdr->fc & IEEE80211_FC_PROTECTED ) &&
+ ( ( hdr->fc & IEEE80211_FC_TYPE ) == IEEE80211_TYPE_DATA ) ) {
+ struct io_buffer *niob = dev->crypto->encrypt ( dev->crypto,
+ iobuf );
+ if ( ! niob )
+ return -ENOMEM; /* only reason encryption could fail */
+
+ /* Free the non-encrypted iob */
+ netdev_tx_complete ( netdev, iobuf );
+
+ /* Transmit the encrypted iob; the Protected flag is
+ set, so we won't recurse into here again */
+ netdev_tx ( netdev, niob );
+
+ /* Don't transmit the freed packet */
+ return 0;
+ }
+
+ if ( dev->op->transmit )
+ rc = dev->op->transmit ( dev, iobuf );
+
+ return rc;
+}
+
+/**
+ * Poll 802.11 device for received packets and completed transmissions
+ *
+ * @v netdev Wrapping network device
+ */
+static void net80211_netdev_poll ( struct net_device *netdev )
+{
+ struct net80211_device *dev = netdev->priv;
+
+ if ( dev->op->poll )
+ dev->op->poll ( dev );
+}
+
+/**
+ * Enable or disable interrupts for 802.11 device
+ *
+ * @v netdev Wrapping network device
+ * @v enable Whether to enable interrupts
+ */
+static void net80211_netdev_irq ( struct net_device *netdev, int enable )
+{
+ struct net80211_device *dev = netdev->priv;
+
+ if ( dev->op->irq )
+ dev->op->irq ( dev, enable );
+}
+
+/** Network device operations for a wrapped 802.11 device */
+static struct net_device_operations net80211_netdev_ops = {
+ .open = net80211_netdev_open,
+ .close = net80211_netdev_close,
+ .transmit = net80211_netdev_transmit,
+ .poll = net80211_netdev_poll,
+ .irq = net80211_netdev_irq,
+};
+
+
+/* ---------- 802.11 link-layer protocol ---------- */
+
+/**
+ * Determine whether a transmission rate uses ERP/OFDM
+ *
+ * @v rate Rate in 100 kbps units
+ * @ret is_erp TRUE if the rate is an ERP/OFDM rate
+ *
+ * 802.11b supports rates of 1.0, 2.0, 5.5, and 11.0 Mbps; any other
+ * rate than these on the 2.4GHz spectrum is an ERP (802.11g) rate.
+ */
+static inline int net80211_rate_is_erp ( u16 rate )
+{
+ if ( rate == 10 || rate == 20 || rate == 55 || rate == 110 )
+ return 0;
+ return 1;
+}
+
+
+/**
+ * Calculate one frame's contribution to 802.11 duration field
+ *
+ * @v dev 802.11 device
+ * @v bytes Amount of data to calculate duration for
+ * @ret dur Duration field in microseconds
+ *
+ * To avoid multiple stations attempting to transmit at once, 802.11
+ * provides that every packet shall include a duration field
+ * specifying a length of time for which the wireless medium will be
+ * reserved after it is transmitted. The duration is measured in
+ * microseconds and is calculated with respect to the current
+ * physical-layer parameters of the 802.11 device.
+ *
+ * For an unfragmented data or management frame, or the last fragment
+ * of a fragmented frame, the duration captures only the 10 data bytes
+ * of one ACK; call once with bytes = 10.
+ *
+ * For a fragment of a data or management rame that will be followed
+ * by more fragments, the duration captures an ACK, the following
+ * fragment, and its ACK; add the results of three calls, two with
+ * bytes = 10 and one with bytes set to the next fragment's size.
+ *
+ * For an RTS control frame, the duration captures the responding CTS,
+ * the frame being sent, and its ACK; add the results of three calls,
+ * two with bytes = 10 and one with bytes set to the next frame's size
+ * (assuming unfragmented).
+ *
+ * For a CTS-to-self control frame, the duration captures the frame
+ * being protected and its ACK; add the results of two calls, one with
+ * bytes = 10 and one with bytes set to the next frame's size.
+ *
+ * No other frame types are currently supported by iPXE.
+ */
+u16 net80211_duration ( struct net80211_device *dev, int bytes, u16 rate )
+{
+ struct net80211_channel *chan = &dev->channels[dev->channel];
+ u32 kbps = rate * 100;
+
+ if ( chan->band == NET80211_BAND_5GHZ || net80211_rate_is_erp ( rate ) ) {
+ /* OFDM encoding (802.11a/g) */
+ int bits_per_symbol = ( kbps * 4 ) / 1000; /* 4us/symbol */
+ int bits = 22 + ( bytes << 3 ); /* 22-bit PLCP */
+ int symbols = ( bits + bits_per_symbol - 1 ) / bits_per_symbol;
+
+ return 16 + 20 + ( symbols * 4 ); /* 16us SIFS, 20us preamble */
+ } else {
+ /* CCK encoding (802.11b) */
+ int phy_time = 144 + 48; /* preamble + PLCP */
+ int bits = bytes << 3;
+ int data_time = ( bits * 1000 + kbps - 1 ) / kbps;
+
+ if ( dev->phy_flags & NET80211_PHY_USE_SHORT_PREAMBLE )
+ phy_time >>= 1;
+
+ return 10 + phy_time + data_time; /* 10us SIFS */
+ }
+}
+
+/**
+ * Add 802.11 link-layer header
+ *
+ * @v netdev Wrapping network device
+ * @v iobuf I/O buffer
+ * @v ll_dest Link-layer destination address
+ * @v ll_source Link-layer source address
+ * @v net_proto Network-layer protocol, in network byte order
+ * @ret rc Return status code
+ *
+ * This adds both the 802.11 frame header and the 802.2 LLC/SNAP
+ * header used on data packets.
+ *
+ * We also check here for state of the link that would make it invalid
+ * to send a data packet; every data packet must pass through here,
+ * and no non-data packet (e.g. management frame) should.
+ */
+static int net80211_ll_push ( struct net_device *netdev,
+ struct io_buffer *iobuf, const void *ll_dest,
+ const void *ll_source, uint16_t net_proto )
+{
+ struct net80211_device *dev = netdev->priv;
+ struct ieee80211_frame *hdr = iob_push ( iobuf,
+ IEEE80211_LLC_HEADER_LEN +
+ IEEE80211_TYP_FRAME_HEADER_LEN );
+ struct ieee80211_llc_snap_header *lhdr =
+ ( void * ) hdr + IEEE80211_TYP_FRAME_HEADER_LEN;
+
+ /* We can't send data packets if we're not associated. */
+ if ( ! ( dev->state & NET80211_ASSOCIATED ) ) {
+ if ( dev->assoc_rc )
+ return dev->assoc_rc;
+ return -ENETUNREACH;
+ }
+
+ hdr->fc = IEEE80211_THIS_VERSION | IEEE80211_TYPE_DATA |
+ IEEE80211_STYPE_DATA | IEEE80211_FC_TODS;
+
+ /* We don't send fragmented frames, so duration is the time
+ for an SIFS + 10-byte ACK. */
+ hdr->duration = net80211_duration ( dev, 10, dev->rates[dev->rate] );
+
+ memcpy ( hdr->addr1, dev->bssid, ETH_ALEN );
+ memcpy ( hdr->addr2, ll_source, ETH_ALEN );
+ memcpy ( hdr->addr3, ll_dest, ETH_ALEN );
+
+ hdr->seq = IEEE80211_MAKESEQ ( ++dev->last_tx_seqnr, 0 );
+
+ lhdr->dsap = IEEE80211_LLC_DSAP;
+ lhdr->ssap = IEEE80211_LLC_SSAP;
+ lhdr->ctrl = IEEE80211_LLC_CTRL;
+ memset ( lhdr->oui, 0x00, 3 );
+ lhdr->ethertype = net_proto;
+
+ return 0;
+}
+
+/**
+ * Remove 802.11 link-layer header
+ *
+ * @v netdev Wrapping network device
+ * @v iobuf I/O buffer
+ * @ret ll_dest Link-layer destination address
+ * @ret ll_source Link-layer source
+ * @ret net_proto Network-layer protocol, in network byte order
+ * @ret flags Packet flags
+ * @ret rc Return status code
+ *
+ * This expects and removes both the 802.11 frame header and the 802.2
+ * LLC/SNAP header that are used on data packets.
+ */
+static int net80211_ll_pull ( struct net_device *netdev __unused,
+ struct io_buffer *iobuf,
+ const void **ll_dest, const void **ll_source,
+ uint16_t * net_proto, unsigned int *flags )
+{
+ struct ieee80211_frame *hdr = iobuf->data;
+ struct ieee80211_llc_snap_header *lhdr =
+ ( void * ) hdr + IEEE80211_TYP_FRAME_HEADER_LEN;
+
+ /* Bunch of sanity checks */
+ if ( iob_len ( iobuf ) < IEEE80211_TYP_FRAME_HEADER_LEN +
+ IEEE80211_LLC_HEADER_LEN ) {
+ DBGC ( netdev->priv, "802.11 %p packet too short (%zd bytes)\n",
+ netdev->priv, iob_len ( iobuf ) );
+ return -EINVAL_PKT_TOO_SHORT;
+ }
+
+ if ( ( hdr->fc & IEEE80211_FC_VERSION ) != IEEE80211_THIS_VERSION ) {
+ DBGC ( netdev->priv, "802.11 %p packet invalid version %04x\n",
+ netdev->priv, hdr->fc & IEEE80211_FC_VERSION );
+ return -EINVAL_PKT_VERSION;
+ }
+
+ if ( ( hdr->fc & IEEE80211_FC_TYPE ) != IEEE80211_TYPE_DATA ||
+ ( hdr->fc & IEEE80211_FC_SUBTYPE ) != IEEE80211_STYPE_DATA ) {
+ DBGC ( netdev->priv, "802.11 %p packet not data/data (fc=%04x)\n",
+ netdev->priv, hdr->fc );
+ return -EINVAL_PKT_NOT_DATA;
+ }
+
+ if ( ( hdr->fc & ( IEEE80211_FC_TODS | IEEE80211_FC_FROMDS ) ) !=
+ IEEE80211_FC_FROMDS ) {
+ DBGC ( netdev->priv, "802.11 %p packet not from DS (fc=%04x)\n",
+ netdev->priv, hdr->fc );
+ return -EINVAL_PKT_NOT_FROMDS;
+ }
+
+ if ( lhdr->dsap != IEEE80211_LLC_DSAP || lhdr->ssap != IEEE80211_LLC_SSAP ||
+ lhdr->ctrl != IEEE80211_LLC_CTRL || lhdr->oui[0] || lhdr->oui[1] ||
+ lhdr->oui[2] ) {
+ DBGC ( netdev->priv, "802.11 %p LLC header is not plain EtherType "
+ "encapsulator: %02x->%02x [%02x] %02x:%02x:%02x %04x\n",
+ netdev->priv, lhdr->dsap, lhdr->ssap, lhdr->ctrl,
+ lhdr->oui[0], lhdr->oui[1], lhdr->oui[2], lhdr->ethertype );
+ return -EINVAL_PKT_LLC_HEADER;
+ }
+
+ iob_pull ( iobuf, sizeof ( *hdr ) + sizeof ( *lhdr ) );
+
+ *ll_dest = hdr->addr1;
+ *ll_source = hdr->addr3;
+ *net_proto = lhdr->ethertype;
+ *flags = ( ( is_multicast_ether_addr ( hdr->addr1 ) ?
+ LL_MULTICAST : 0 ) |
+ ( is_broadcast_ether_addr ( hdr->addr1 ) ?
+ LL_BROADCAST : 0 ) );
+ return 0;
+}
+
+/** 802.11 link-layer protocol */
+static struct ll_protocol net80211_ll_protocol __ll_protocol = {
+ .name = "802.11",
+ .push = net80211_ll_push,
+ .pull = net80211_ll_pull,
+ .init_addr = eth_init_addr,
+ .ntoa = eth_ntoa,
+ .mc_hash = eth_mc_hash,
+ .eth_addr = eth_eth_addr,
+ .eui64 = eth_eui64,
+ .ll_proto = htons ( ARPHRD_ETHER ), /* "encapsulated Ethernet" */
+ .hw_addr_len = ETH_ALEN,
+ .ll_addr_len = ETH_ALEN,
+ .ll_header_len = IEEE80211_TYP_FRAME_HEADER_LEN +
+ IEEE80211_LLC_HEADER_LEN,
+};
+
+
+/* ---------- 802.11 network management API ---------- */
+
+/**
+ * Get 802.11 device from wrapping network device
+ *
+ * @v netdev Wrapping network device
+ * @ret dev 802.11 device wrapped by network device, or NULL
+ *
+ * Returns NULL if the network device does not wrap an 802.11 device.
+ */
+struct net80211_device * net80211_get ( struct net_device *netdev )
+{
+ struct net80211_device *dev;
+
+ list_for_each_entry ( dev, &net80211_devices, list ) {
+ if ( netdev->priv == dev )
+ return netdev->priv;
+ }
+
+ return NULL;
+}
+
+/**
+ * Set state of 802.11 device keeping management frames
+ *
+ * @v dev 802.11 device
+ * @v enable Whether to keep management frames
+ * @ret oldenab Whether management frames were enabled before this call
+ *
+ * If enable is TRUE, beacon, probe, and action frames will be kept
+ * and may be retrieved by calling net80211_mgmt_dequeue().
+ */
+int net80211_keep_mgmt ( struct net80211_device *dev, int enable )
+{
+ int oldenab = dev->keep_mgmt;
+
+ dev->keep_mgmt = enable;
+ return oldenab;
+}
+
+/**
+ * Get 802.11 management frame
+ *
+ * @v dev 802.11 device
+ * @ret signal Signal strength of returned management frame
+ * @ret iob I/O buffer, or NULL if no management frame is queued
+ *
+ * Frames will only be returned by this function if
+ * net80211_keep_mgmt() has been previously called with enable set to
+ * TRUE.
+ *
+ * The calling function takes ownership of the returned I/O buffer.
+ */
+struct io_buffer * net80211_mgmt_dequeue ( struct net80211_device *dev,
+ int *signal )
+{
+ struct io_buffer *iobuf;
+ struct net80211_rx_info *rxi;
+
+ list_for_each_entry ( rxi, &dev->mgmt_info_queue, list ) {
+ list_del ( &rxi->list );
+ if ( signal )
+ *signal = rxi->signal;
+ free ( rxi );
+
+ assert ( ! list_empty ( &dev->mgmt_queue ) );
+ iobuf = list_first_entry ( &dev->mgmt_queue, struct io_buffer,
+ list );
+ list_del ( &iobuf->list );
+ return iobuf;
+ }
+
+ return NULL;
+}
+
+/**
+ * Transmit 802.11 management frame
+ *
+ * @v dev 802.11 device
+ * @v fc Frame Control flags for management frame
+ * @v dest Destination access point
+ * @v iob I/O buffer
+ * @ret rc Return status code
+ *
+ * The @a fc argument must contain at least an IEEE 802.11 management
+ * subtype number (e.g. IEEE80211_STYPE_PROBE_REQ). If it contains
+ * IEEE80211_FC_PROTECTED, the frame will be encrypted prior to
+ * transmission.
+ *
+ * It is required that @a iob have at least 24 bytes of headroom
+ * reserved before its data start.
+ */
+int net80211_tx_mgmt ( struct net80211_device *dev, u16 fc, u8 dest[6],
+ struct io_buffer *iob )
+{
+ struct ieee80211_frame *hdr = iob_push ( iob,
+ IEEE80211_TYP_FRAME_HEADER_LEN );
+
+ hdr->fc = IEEE80211_THIS_VERSION | IEEE80211_TYPE_MGMT |
+ ( fc & ~IEEE80211_FC_PROTECTED );
+ hdr->duration = net80211_duration ( dev, 10, dev->rates[dev->rate] );
+ hdr->seq = IEEE80211_MAKESEQ ( ++dev->last_tx_seqnr, 0 );
+
+ memcpy ( hdr->addr1, dest, ETH_ALEN ); /* DA = RA */
+ memcpy ( hdr->addr2, dev->netdev->ll_addr, ETH_ALEN ); /* SA = TA */
+ memcpy ( hdr->addr3, dest, ETH_ALEN ); /* BSSID */
+
+ if ( fc & IEEE80211_FC_PROTECTED ) {
+ if ( ! dev->crypto )
+ return -EINVAL_CRYPTO_REQUEST;
+
+ struct io_buffer *eiob = dev->crypto->encrypt ( dev->crypto,
+ iob );
+ free_iob ( iob );
+ iob = eiob;
+ }
+
+ return netdev_tx ( dev->netdev, iob );
+}
+
+
+/* ---------- Driver API ---------- */
+
+/** 802.11 association process descriptor */
+static struct process_descriptor net80211_process_desc =
+ PROC_DESC ( struct net80211_device, proc_assoc,
+ net80211_step_associate );
+
+/**
+ * Allocate 802.11 device
+ *
+ * @v priv_size Size of driver-private allocation area
+ * @ret dev Newly allocated 802.11 device
+ *
+ * This function allocates a net_device with space in its private area
+ * for both the net80211_device it will wrap and the driver-private
+ * data space requested. It initializes the link-layer-specific parts
+ * of the net_device, and links the net80211_device to the net_device
+ * appropriately.
+ */
+struct net80211_device * net80211_alloc ( size_t priv_size )
+{
+ struct net80211_device *dev;
+ struct net_device *netdev =
+ alloc_netdev ( sizeof ( *dev ) + priv_size );
+
+ if ( ! netdev )
+ return NULL;
+
+ netdev->ll_protocol = &net80211_ll_protocol;
+ netdev->ll_broadcast = eth_broadcast;
+ netdev->max_pkt_len = IEEE80211_MAX_DATA_LEN;
+ netdev_init ( netdev, &net80211_netdev_ops );
+
+ dev = netdev->priv;
+ dev->netdev = netdev;
+ dev->priv = ( u8 * ) dev + sizeof ( *dev );
+ dev->op = &net80211_null_ops;
+
+ process_init_stopped ( &dev->proc_assoc, &net80211_process_desc,
+ &netdev->refcnt );
+ INIT_LIST_HEAD ( &dev->mgmt_queue );
+ INIT_LIST_HEAD ( &dev->mgmt_info_queue );
+
+ return dev;
+}
+
+/**
+ * Register 802.11 device with network stack
+ *
+ * @v dev 802.11 device
+ * @v ops 802.11 device operations
+ * @v hw 802.11 hardware information
+ *
+ * This also registers the wrapping net_device with the higher network
+ * layers.
+ */
+int net80211_register ( struct net80211_device *dev,
+ struct net80211_device_operations *ops,
+ struct net80211_hw_info *hw )
+{
+ dev->op = ops;
+ dev->hw = malloc ( sizeof ( *hw ) );
+ if ( ! dev->hw )
+ return -ENOMEM;
+
+ memcpy ( dev->hw, hw, sizeof ( *hw ) );
+ memcpy ( dev->netdev->hw_addr, hw->hwaddr, ETH_ALEN );
+
+ /* Set some sensible channel defaults for driver's open() function */
+ memcpy ( dev->channels, dev->hw->channels,
+ NET80211_MAX_CHANNELS * sizeof ( dev->channels[0] ) );
+ dev->channel = 0;
+
+ list_add_tail ( &dev->list, &net80211_devices );
+ return register_netdev ( dev->netdev );
+}
+
+/**
+ * Unregister 802.11 device from network stack
+ *
+ * @v dev 802.11 device
+ *
+ * After this call, the device operations are cleared so that they
+ * will not be called.
+ */
+void net80211_unregister ( struct net80211_device *dev )
+{
+ unregister_netdev ( dev->netdev );
+ list_del ( &dev->list );
+ dev->op = &net80211_null_ops;
+}
+
+/**
+ * Free 802.11 device
+ *
+ * @v dev 802.11 device
+ *
+ * The device should be unregistered before this function is called.
+ */
+void net80211_free ( struct net80211_device *dev )
+{
+ free ( dev->hw );
+ rc80211_free ( dev->rctl );
+ netdev_nullify ( dev->netdev );
+ netdev_put ( dev->netdev );
+}
+
+
+/* ---------- 802.11 network management workhorse code ---------- */
+
+/**
+ * Set state of 802.11 device
+ *
+ * @v dev 802.11 device
+ * @v clear Bitmask of flags to clear
+ * @v set Bitmask of flags to set
+ * @v status Status or reason code for most recent operation
+ *
+ * If @a status represents a reason code, it should be OR'ed with
+ * NET80211_IS_REASON.
+ *
+ * Clearing authentication also clears association; clearing
+ * association also clears security handshaking state. Clearing
+ * association removes the link-up flag from the wrapping net_device,
+ * but setting it does not automatically set the flag; that is left to
+ * the judgment of higher-level code.
+ */
+static inline void net80211_set_state ( struct net80211_device *dev,
+ short clear, short set,
+ u16 status )
+{
+ /* The conditions in this function are deliberately formulated
+ to be decidable at compile-time in most cases. Since clear
+ and set are generally passed as constants, the body of this
+ function can be reduced down to a few statements by the
+ compiler. */
+
+ const int statmsk = NET80211_STATUS_MASK | NET80211_IS_REASON;
+
+ if ( clear & NET80211_PROBED )
+ clear |= NET80211_AUTHENTICATED;
+
+ if ( clear & NET80211_AUTHENTICATED )
+ clear |= NET80211_ASSOCIATED;
+
+ if ( clear & NET80211_ASSOCIATED )
+ clear |= NET80211_CRYPTO_SYNCED;
+
+ dev->state = ( dev->state & ~clear ) | set;
+ dev->state = ( dev->state & ~statmsk ) | ( status & statmsk );
+
+ if ( clear & NET80211_ASSOCIATED )
+ netdev_link_down ( dev->netdev );
+
+ if ( ( clear | set ) & NET80211_ASSOCIATED )
+ dev->op->config ( dev, NET80211_CFG_ASSOC );
+
+ if ( status != 0 ) {
+ if ( status & NET80211_IS_REASON )
+ dev->assoc_rc = -E80211_REASON ( status );
+ else
+ dev->assoc_rc = -E80211_STATUS ( status );
+ netdev_link_err ( dev->netdev, dev->assoc_rc );
+ }
+}
+
+/**
+ * Add channels to 802.11 device
+ *
+ * @v dev 802.11 device
+ * @v start First channel number to add
+ * @v len Number of channels to add
+ * @v txpower TX power (dBm) to allow on added channels
+ *
+ * To replace the current list of channels instead of adding to it,
+ * set the nr_channels field of the 802.11 device to 0 before calling
+ * this function.
+ */
+static void net80211_add_channels ( struct net80211_device *dev, int start,
+ int len, int txpower )
+{
+ int i, chan = start;
+
+ for ( i = dev->nr_channels; len-- && i < NET80211_MAX_CHANNELS; i++ ) {
+ dev->channels[i].channel_nr = chan;
+ dev->channels[i].maxpower = txpower;
+ dev->channels[i].hw_value = 0;
+
+ if ( chan >= 1 && chan <= 14 ) {
+ dev->channels[i].band = NET80211_BAND_2GHZ;
+ if ( chan == 14 )
+ dev->channels[i].center_freq = 2484;
+ else
+ dev->channels[i].center_freq = 2407 + 5 * chan;
+ chan++;
+ } else {
+ dev->channels[i].band = NET80211_BAND_5GHZ;
+ dev->channels[i].center_freq = 5000 + 5 * chan;
+ chan += 4;
+ }
+ }
+
+ dev->nr_channels = i;
+}
+
+/**
+ * Filter 802.11 device channels for hardware capabilities
+ *
+ * @v dev 802.11 device
+ *
+ * Hardware may support fewer channels than regulatory restrictions
+ * allow; this function filters out channels in dev->channels that are
+ * not supported by the hardware list in dev->hwinfo. It also copies
+ * over the net80211_channel::hw_value and limits maximum TX power
+ * appropriately.
+ *
+ * Channels are matched based on center frequency, ignoring band and
+ * channel number.
+ *
+ * If the driver specifies no supported channels, the effect will be
+ * as though all were supported.
+ */
+static void net80211_filter_hw_channels ( struct net80211_device *dev )
+{
+ int delta = 0, i = 0;
+ int old_freq = dev->channels[dev->channel].center_freq;
+ struct net80211_channel *chan, *hwchan;
+
+ if ( ! dev->hw->nr_channels )
+ return;
+
+ dev->channel = 0;
+ for ( chan = dev->channels; chan < dev->channels + dev->nr_channels;
+ chan++, i++ ) {
+ int ok = 0;
+ for ( hwchan = dev->hw->channels;
+ hwchan < dev->hw->channels + dev->hw->nr_channels;
+ hwchan++ ) {
+ if ( hwchan->center_freq == chan->center_freq ) {
+ ok = 1;
+ break;
+ }
+ }
+
+ if ( ! ok )
+ delta++;
+ else {
+ chan->hw_value = hwchan->hw_value;
+ if ( hwchan->maxpower != 0 &&
+ chan->maxpower > hwchan->maxpower )
+ chan->maxpower = hwchan->maxpower;
+ if ( old_freq == chan->center_freq )
+ dev->channel = i - delta;
+ if ( delta )
+ chan[-delta] = *chan;
+ }
+ }
+
+ dev->nr_channels -= delta;
+
+ if ( dev->channels[dev->channel].center_freq != old_freq )
+ dev->op->config ( dev, NET80211_CFG_CHANNEL );
+}
+
+/**
+ * Update 802.11 device state to reflect received capabilities field
+ *
+ * @v dev 802.11 device
+ * @v capab Capabilities field in beacon, probe, or association frame
+ * @ret rc Return status code
+ */
+static int net80211_process_capab ( struct net80211_device *dev,
+ u16 capab )
+{
+ u16 old_phy = dev->phy_flags;
+
+ if ( ( capab & ( IEEE80211_CAPAB_MANAGED | IEEE80211_CAPAB_ADHOC ) ) !=
+ IEEE80211_CAPAB_MANAGED ) {
+ DBGC ( dev, "802.11 %p cannot handle IBSS network\n", dev );
+ return -ENOSYS;
+ }
+
+ dev->phy_flags &= ~( NET80211_PHY_USE_SHORT_PREAMBLE |
+ NET80211_PHY_USE_SHORT_SLOT );
+
+ if ( capab & IEEE80211_CAPAB_SHORT_PMBL )
+ dev->phy_flags |= NET80211_PHY_USE_SHORT_PREAMBLE;
+
+ if ( capab & IEEE80211_CAPAB_SHORT_SLOT )
+ dev->phy_flags |= NET80211_PHY_USE_SHORT_SLOT;
+
+ if ( old_phy != dev->phy_flags )
+ dev->op->config ( dev, NET80211_CFG_PHY_PARAMS );
+
+ return 0;
+}
+
+/**
+ * Update 802.11 device state to reflect received information elements
+ *
+ * @v dev 802.11 device
+ * @v ie Pointer to first information element
+ * @v ie_end Pointer to tail of packet I/O buffer
+ * @ret rc Return status code
+ */
+static int net80211_process_ie ( struct net80211_device *dev,
+ union ieee80211_ie *ie, void *ie_end )
+{
+ u16 old_rate = dev->rates[dev->rate];
+ u16 old_phy = dev->phy_flags;
+ int have_rates = 0, i;
+ int ds_channel = 0;
+ int changed = 0;
+ int band = dev->channels[dev->channel].band;
+
+ if ( ! ieee80211_ie_bound ( ie, ie_end ) )
+ return 0;
+
+ for ( ; ie; ie = ieee80211_next_ie ( ie, ie_end ) ) {
+ switch ( ie->id ) {
+ case IEEE80211_IE_SSID:
+ if ( ie->len <= 32 ) {
+ memcpy ( dev->essid, ie->ssid, ie->len );
+ dev->essid[ie->len] = 0;
+ }
+ break;
+
+ case IEEE80211_IE_RATES:
+ case IEEE80211_IE_EXT_RATES:
+ if ( ! have_rates ) {
+ dev->nr_rates = 0;
+ dev->basic_rates = 0;
+ have_rates = 1;
+ }
+ for ( i = 0; i < ie->len &&
+ dev->nr_rates < NET80211_MAX_RATES; i++ ) {
+ u8 rid = ie->rates[i];
+ u16 rate = ( rid & 0x7f ) * 5;
+
+ if ( rid & 0x80 )
+ dev->basic_rates |=
+ ( 1 << dev->nr_rates );
+
+ dev->rates[dev->nr_rates++] = rate;
+ }
+
+ break;
+
+ case IEEE80211_IE_DS_PARAM:
+ if ( dev->channel < dev->nr_channels && ds_channel ==
+ dev->channels[dev->channel].channel_nr )
+ break;
+ ds_channel = ie->ds_param.current_channel;
+ net80211_change_channel ( dev, ds_channel );
+ break;
+
+ case IEEE80211_IE_COUNTRY:
+ dev->nr_channels = 0;
+
+ DBGC ( dev, "802.11 %p setting country regulations "
+ "for %c%c\n", dev, ie->country.name[0],
+ ie->country.name[1] );
+ for ( i = 0; i < ( ie->len - 3 ) / 3; i++ ) {
+ union ieee80211_ie_country_triplet *t =
+ &ie->country.triplet[i];
+ if ( t->first > 200 ) {
+ DBGC ( dev, "802.11 %p ignoring regulatory "
+ "extension information\n", dev );
+ } else {
+ net80211_add_channels ( dev,
+ t->band.first_channel,
+ t->band.nr_channels,
+ t->band.max_txpower );
+ }
+ }
+ net80211_filter_hw_channels ( dev );
+ break;
+
+ case IEEE80211_IE_ERP_INFO:
+ dev->phy_flags &= ~( NET80211_PHY_USE_PROTECTION |
+ NET80211_PHY_USE_SHORT_PREAMBLE );
+ if ( ie->erp_info & IEEE80211_ERP_USE_PROTECTION )
+ dev->phy_flags |= NET80211_PHY_USE_PROTECTION;
+ if ( ! ( ie->erp_info & IEEE80211_ERP_BARKER_LONG ) )
+ dev->phy_flags |= NET80211_PHY_USE_SHORT_PREAMBLE;
+ break;
+ }
+ }
+
+ if ( have_rates ) {
+ /* Allow only those rates that are also supported by
+ the hardware. */
+ int delta = 0, j;
+
+ dev->rate = 0;
+ for ( i = 0; i < dev->nr_rates; i++ ) {
+ int ok = 0;
+ for ( j = 0; j < dev->hw->nr_rates[band]; j++ ) {
+ if ( dev->hw->rates[band][j] == dev->rates[i] ){
+ ok = 1;
+ break;
+ }
+ }
+
+ if ( ! ok )
+ delta++;
+ else {
+ dev->rates[i - delta] = dev->rates[i];
+ if ( old_rate == dev->rates[i] )
+ dev->rate = i - delta;
+ }
+ }
+
+ dev->nr_rates -= delta;
+
+ /* Sort available rates - sorted subclumps tend to already
+ exist, so insertion sort works well. */
+ for ( i = 1; i < dev->nr_rates; i++ ) {
+ u16 rate = dev->rates[i];
+ u32 tmp, br, mask;
+
+ for ( j = i - 1; j >= 0 && dev->rates[j] >= rate; j-- )
+ dev->rates[j + 1] = dev->rates[j];
+ dev->rates[j + 1] = rate;
+
+ /* Adjust basic_rates to match by rotating the
+ bits from bit j+1 to bit i left one position. */
+ mask = ( ( 1 << i ) - 1 ) & ~( ( 1 << ( j + 1 ) ) - 1 );
+ br = dev->basic_rates;
+ tmp = br & ( 1 << i );
+ br = ( br & ~( mask | tmp ) ) | ( ( br & mask ) << 1 );
+ br |= ( tmp >> ( i - j - 1 ) );
+ dev->basic_rates = br;
+ }
+
+ net80211_set_rtscts_rate ( dev );
+
+ if ( dev->rates[dev->rate] != old_rate )
+ changed |= NET80211_CFG_RATE;
+ }
+
+ if ( dev->hw->flags & NET80211_HW_NO_SHORT_PREAMBLE )
+ dev->phy_flags &= ~NET80211_PHY_USE_SHORT_PREAMBLE;
+ if ( dev->hw->flags & NET80211_HW_NO_SHORT_SLOT )
+ dev->phy_flags &= ~NET80211_PHY_USE_SHORT_SLOT;
+
+ if ( old_phy != dev->phy_flags )
+ changed |= NET80211_CFG_PHY_PARAMS;
+
+ if ( changed )
+ dev->op->config ( dev, changed );
+
+ return 0;
+}
+
+/**
+ * Create information elements for outgoing probe or association packet
+ *
+ * @v dev 802.11 device
+ * @v ie Pointer to start of information element area
+ * @ret next_ie Pointer to first byte after added information elements
+ */
+static union ieee80211_ie *
+net80211_marshal_request_info ( struct net80211_device *dev,
+ union ieee80211_ie *ie )
+{
+ int i;
+
+ ie->id = IEEE80211_IE_SSID;
+ ie->len = strlen ( dev->essid );
+ memcpy ( ie->ssid, dev->essid, ie->len );
+
+ ie = ieee80211_next_ie ( ie, NULL );
+
+ ie->id = IEEE80211_IE_RATES;
+ ie->len = dev->nr_rates;
+ if ( ie->len > 8 )
+ ie->len = 8;
+
+ for ( i = 0; i < ie->len; i++ ) {
+ ie->rates[i] = dev->rates[i] / 5;
+ if ( dev->basic_rates & ( 1 << i ) )
+ ie->rates[i] |= 0x80;
+ }
+
+ ie = ieee80211_next_ie ( ie, NULL );
+
+ if ( dev->rsn_ie && dev->rsn_ie->id == IEEE80211_IE_RSN ) {
+ memcpy ( ie, dev->rsn_ie, dev->rsn_ie->len + 2 );
+ ie = ieee80211_next_ie ( ie, NULL );
+ }
+
+ if ( dev->nr_rates > 8 ) {
+ /* 802.11 requires we use an Extended Basic Rates IE
+ for the rates beyond the eighth. */
+
+ ie->id = IEEE80211_IE_EXT_RATES;
+ ie->len = dev->nr_rates - 8;
+
+ for ( ; i < dev->nr_rates; i++ ) {
+ ie->rates[i - 8] = dev->rates[i] / 5;
+ if ( dev->basic_rates & ( 1 << i ) )
+ ie->rates[i - 8] |= 0x80;
+ }
+
+ ie = ieee80211_next_ie ( ie, NULL );
+ }
+
+ if ( dev->rsn_ie && dev->rsn_ie->id == IEEE80211_IE_VENDOR ) {
+ memcpy ( ie, dev->rsn_ie, dev->rsn_ie->len + 2 );
+ ie = ieee80211_next_ie ( ie, NULL );
+ }
+
+ return ie;
+}
+
+/** Seconds to wait after finding a network, to possibly find better APs for it
+ *
+ * This is used when a specific SSID to scan for is specified.
+ */
+#define NET80211_PROBE_GATHER 1
+
+/** Seconds to wait after finding a network, to possibly find other networks
+ *
+ * This is used when an empty SSID is specified, to scan for all
+ * networks.
+ */
+#define NET80211_PROBE_GATHER_ALL 2
+
+/** Seconds to allow a probe to take if no network has been found */
+#define NET80211_PROBE_TIMEOUT 6
+
+/**
+ * Begin probe of 802.11 networks
+ *
+ * @v dev 802.11 device
+ * @v essid SSID to probe for, or "" to accept any (may not be NULL)
+ * @v active Whether to use active scanning
+ * @ret ctx Probe context
+ *
+ * Active scanning may only be used on channels 1-11 in the 2.4GHz
+ * band, due to iPXE's lack of a complete regulatory database. If
+ * active scanning is used, probe packets will be sent on each
+ * channel; this can allow association with hidden-SSID networks if
+ * the SSID is properly specified.
+ *
+ * A @c NULL return indicates an out-of-memory condition.
+ *
+ * The returned context must be periodically passed to
+ * net80211_probe_step() until that function returns zero.
+ */
+struct net80211_probe_ctx * net80211_probe_start ( struct net80211_device *dev,
+ const char *essid,
+ int active )
+{
+ struct net80211_probe_ctx *ctx = zalloc ( sizeof ( *ctx ) );
+
+ if ( ! ctx )
+ return NULL;
+
+ assert ( netdev_is_open ( dev->netdev ) );
+
+ ctx->dev = dev;
+ ctx->old_keep_mgmt = net80211_keep_mgmt ( dev, 1 );
+ ctx->essid = essid;
+ if ( dev->essid != ctx->essid )
+ strcpy ( dev->essid, ctx->essid );
+
+ if ( active ) {
+ struct ieee80211_probe_req *probe_req;
+ union ieee80211_ie *ie;
+
+ ctx->probe = alloc_iob ( 128 );
+ iob_reserve ( ctx->probe, IEEE80211_TYP_FRAME_HEADER_LEN );
+ probe_req = ctx->probe->data;
+
+ ie = net80211_marshal_request_info ( dev,
+ probe_req->info_element );
+
+ iob_put ( ctx->probe, ( void * ) ie - ctx->probe->data );
+ }
+
+ ctx->ticks_start = currticks();
+ ctx->ticks_beacon = 0;
+ ctx->ticks_channel = currticks();
+ ctx->hop_time = ticks_per_sec() / ( active ? 2 : 6 );
+
+ /*
+ * Channels on 2.4GHz overlap, and the most commonly used
+ * are 1, 6, and 11. We'll get a result faster if we check
+ * every 5 channels, but in order to hit all of them the
+ * number of channels must be relatively prime to 5. If it's
+ * not, tweak the hop.
+ */
+ ctx->hop_step = 5;
+ while ( dev->nr_channels % ctx->hop_step == 0 && ctx->hop_step > 1 )
+ ctx->hop_step--;
+
+ ctx->beacons = malloc ( sizeof ( *ctx->beacons ) );
+ INIT_LIST_HEAD ( ctx->beacons );
+
+ dev->channel = 0;
+ dev->op->config ( dev, NET80211_CFG_CHANNEL );
+
+ return ctx;
+}
+
+/**
+ * Continue probe of 802.11 networks
+ *
+ * @v ctx Probe context returned by net80211_probe_start()
+ * @ret rc Probe status
+ *
+ * The return code will be 0 if the probe is still going on (and this
+ * function should be called again), a positive number if the probe
+ * completed successfully, or a negative error code if the probe
+ * failed for that reason.
+ *
+ * Whether the probe succeeded or failed, you must call
+ * net80211_probe_finish_all() or net80211_probe_finish_best()
+ * (depending on whether you want information on all networks or just
+ * the best-signal one) in order to release the probe context. A
+ * failed probe may still have acquired some valid data.
+ */
+int net80211_probe_step ( struct net80211_probe_ctx *ctx )
+{
+ struct net80211_device *dev = ctx->dev;
+ u32 start_timeout = NET80211_PROBE_TIMEOUT * ticks_per_sec();
+ u32 gather_timeout = ticks_per_sec();
+ u32 now = currticks();
+ struct io_buffer *iob;
+ int signal;
+ int rc;
+ char ssid[IEEE80211_MAX_SSID_LEN + 1];
+
+ gather_timeout *= ( ctx->essid[0] ? NET80211_PROBE_GATHER :
+ NET80211_PROBE_GATHER_ALL );
+
+ /* Time out if necessary */
+ if ( now >= ctx->ticks_start + start_timeout )
+ return list_empty ( ctx->beacons ) ? -ETIMEDOUT : +1;
+
+ if ( ctx->ticks_beacon > 0 && now >= ctx->ticks_start + gather_timeout )
+ return +1;
+
+ /* Change channels if necessary */
+ if ( now >= ctx->ticks_channel + ctx->hop_time ) {
+ dev->channel = ( dev->channel + ctx->hop_step )
+ % dev->nr_channels;
+ dev->op->config ( dev, NET80211_CFG_CHANNEL );
+ udelay ( dev->hw->channel_change_time );
+
+ ctx->ticks_channel = now;
+
+ if ( ctx->probe ) {
+ struct io_buffer *siob = ctx->probe; /* to send */
+
+ /* make a copy for future use */
+ iob = alloc_iob ( siob->tail - siob->head );
+ iob_reserve ( iob, iob_headroom ( siob ) );
+ memcpy ( iob_put ( iob, iob_len ( siob ) ),
+ siob->data, iob_len ( siob ) );
+
+ ctx->probe = iob;
+ rc = net80211_tx_mgmt ( dev, IEEE80211_STYPE_PROBE_REQ,
+ eth_broadcast,
+ iob_disown ( siob ) );
+ if ( rc ) {
+ DBGC ( dev, "802.11 %p send probe failed: "
+ "%s\n", dev, strerror ( rc ) );
+ return rc;
+ }
+ }
+ }
+
+ /* Check for new management packets */
+ while ( ( iob = net80211_mgmt_dequeue ( dev, &signal ) ) != NULL ) {
+ struct ieee80211_frame *hdr;
+ struct ieee80211_beacon *beacon;
+ union ieee80211_ie *ie;
+ struct net80211_wlan *wlan;
+ u16 type;
+
+ hdr = iob->data;
+ type = hdr->fc & IEEE80211_FC_SUBTYPE;
+ beacon = ( struct ieee80211_beacon * ) hdr->data;
+
+ if ( type != IEEE80211_STYPE_BEACON &&
+ type != IEEE80211_STYPE_PROBE_RESP ) {
+ DBGC2 ( dev, "802.11 %p probe: non-beacon\n", dev );
+ goto drop;
+ }
+
+ if ( ( void * ) beacon->info_element >= iob->tail ) {
+ DBGC ( dev, "802.11 %p probe: beacon with no IEs\n",
+ dev );
+ goto drop;
+ }
+
+ ie = beacon->info_element;
+
+ if ( ! ieee80211_ie_bound ( ie, iob->tail ) )
+ ie = NULL;
+
+ while ( ie && ie->id != IEEE80211_IE_SSID )
+ ie = ieee80211_next_ie ( ie, iob->tail );
+
+ if ( ! ie ) {
+ DBGC ( dev, "802.11 %p probe: beacon with no SSID\n",
+ dev );
+ goto drop;
+ }
+
+ memcpy ( ssid, ie->ssid, ie->len );
+ ssid[ie->len] = 0;
+
+ if ( ctx->essid[0] && strcmp ( ctx->essid, ssid ) != 0 ) {
+ DBGC2 ( dev, "802.11 %p probe: beacon with wrong SSID "
+ "(%s)\n", dev, ssid );
+ goto drop;
+ }
+
+ /* See if we've got an entry for this network */
+ list_for_each_entry ( wlan, ctx->beacons, list ) {
+ if ( strcmp ( wlan->essid, ssid ) != 0 )
+ continue;
+
+ if ( signal < wlan->signal ) {
+ DBGC2 ( dev, "802.11 %p probe: beacon for %s "
+ "(%s) with weaker signal %d\n", dev,
+ ssid, eth_ntoa ( hdr->addr3 ), signal );
+ goto drop;
+ }
+
+ goto fill;
+ }
+
+ /* No entry yet - make one */
+ wlan = zalloc ( sizeof ( *wlan ) );
+ strcpy ( wlan->essid, ssid );
+ list_add_tail ( &wlan->list, ctx->beacons );
+
+ /* Whether we're using an old entry or a new one, fill
+ it with new data. */
+ fill:
+ memcpy ( wlan->bssid, hdr->addr3, ETH_ALEN );
+ wlan->signal = signal;
+ wlan->channel = dev->channels[dev->channel].channel_nr;
+
+ /* Copy this I/O buffer into a new wlan->beacon; the
+ * iob we've got probably came from the device driver
+ * and may have the full 2.4k allocation, which we
+ * don't want to keep around wasting memory.
+ */
+ free_iob ( wlan->beacon );
+ wlan->beacon = alloc_iob ( iob_len ( iob ) );
+ memcpy ( iob_put ( wlan->beacon, iob_len ( iob ) ),
+ iob->data, iob_len ( iob ) );
+
+ if ( ( rc = sec80211_detect ( wlan->beacon, &wlan->handshaking,
+ &wlan->crypto ) ) == -ENOTSUP ) {
+ struct ieee80211_beacon *beacon =
+ ( struct ieee80211_beacon * ) hdr->data;
+
+ if ( beacon->capability & IEEE80211_CAPAB_PRIVACY ) {
+ DBG ( "802.11 %p probe: secured network %s but "
+ "encryption support not compiled in\n",
+ dev, wlan->essid );
+ wlan->handshaking = NET80211_SECPROT_UNKNOWN;
+ wlan->crypto = NET80211_CRYPT_UNKNOWN;
+ } else {
+ wlan->handshaking = NET80211_SECPROT_NONE;
+ wlan->crypto = NET80211_CRYPT_NONE;
+ }
+ } else if ( rc != 0 ) {
+ DBGC ( dev, "802.11 %p probe warning: network "
+ "%s with unidentifiable security "
+ "settings: %s\n", dev, wlan->essid,
+ strerror ( rc ) );
+ }
+
+ ctx->ticks_beacon = now;
+
+ DBGC2 ( dev, "802.11 %p probe: good beacon for %s (%s)\n",
+ dev, wlan->essid, eth_ntoa ( wlan->bssid ) );
+
+ drop:
+ free_iob ( iob );
+ }
+
+ return 0;
+}
+
+
+/**
+ * Finish probe of 802.11 networks, returning best-signal network found
+ *
+ * @v ctx Probe context
+ * @ret wlan Best-signal network found, or @c NULL if none were found
+ *
+ * If net80211_probe_start() was called with a particular SSID
+ * parameter as filter, only a network with that SSID (matching
+ * case-sensitively) can be returned from this function.
+ */
+struct net80211_wlan *
+net80211_probe_finish_best ( struct net80211_probe_ctx *ctx )
+{
+ struct net80211_wlan *best = NULL, *wlan;
+
+ if ( ! ctx )
+ return NULL;
+
+ list_for_each_entry ( wlan, ctx->beacons, list ) {
+ if ( ! best || best->signal < wlan->signal )
+ best = wlan;
+ }
+
+ if ( best )
+ list_del ( &best->list );
+ else
+ DBGC ( ctx->dev, "802.11 %p probe: found nothing for '%s'\n",
+ ctx->dev, ctx->essid );
+
+ net80211_free_wlanlist ( ctx->beacons );
+
+ net80211_keep_mgmt ( ctx->dev, ctx->old_keep_mgmt );
+
+ if ( ctx->probe )
+ free_iob ( ctx->probe );
+
+ free ( ctx );
+
+ return best;
+}
+
+
+/**
+ * Finish probe of 802.11 networks, returning all networks found
+ *
+ * @v ctx Probe context
+ * @ret list List of net80211_wlan detailing networks found
+ *
+ * If net80211_probe_start() was called with a particular SSID
+ * parameter as filter, this will always return either an empty or a
+ * one-element list.
+ */
+struct list_head *net80211_probe_finish_all ( struct net80211_probe_ctx *ctx )
+{
+ struct list_head *beacons = ctx->beacons;
+
+ if ( ! ctx )
+ return NULL;
+
+ net80211_keep_mgmt ( ctx->dev, ctx->old_keep_mgmt );
+
+ if ( ctx->probe )
+ free_iob ( ctx->probe );
+
+ free ( ctx );
+
+ return beacons;
+}
+
+
+/**
+ * Free WLAN structure
+ *
+ * @v wlan WLAN structure to free
+ */
+void net80211_free_wlan ( struct net80211_wlan *wlan )
+{
+ if ( wlan ) {
+ free_iob ( wlan->beacon );
+ free ( wlan );
+ }
+}
+
+
+/**
+ * Free list of WLAN structures
+ *
+ * @v list List of WLAN structures to free
+ */
+void net80211_free_wlanlist ( struct list_head *list )
+{
+ struct net80211_wlan *wlan, *tmp;
+
+ if ( ! list )
+ return;
+
+ list_for_each_entry_safe ( wlan, tmp, list, list ) {
+ list_del ( &wlan->list );
+ net80211_free_wlan ( wlan );
+ }
+
+ free ( list );
+}
+
+
+/** Number of ticks to wait for replies to association management frames */
+#define ASSOC_TIMEOUT TICKS_PER_SEC
+
+/** Number of times to try sending a particular association management frame */
+#define ASSOC_RETRIES 2
+
+/**
+ * Step 802.11 association process
+ *
+ * @v dev 802.11 device
+ */
+static void net80211_step_associate ( struct net80211_device *dev )
+{
+ int rc = 0;
+ int status = dev->state & NET80211_STATUS_MASK;
+
+ /*
+ * We use a sort of state machine implemented using bits in
+ * the dev->state variable. At each call, we take the
+ * logically first step that has not yet succeeded; either it
+ * has not been tried yet, it's being retried, or it failed.
+ * If it failed, we return an error indication; otherwise we
+ * perform the step. If it succeeds, RX handling code will set
+ * the appropriate status bit for us.
+ *
+ * Probe works a bit differently, since we have to step it
+ * on every call instead of waiting for a packet to arrive
+ * that will set the completion bit for us.
+ */
+
+ /* If we're waiting for a reply, check for timeout condition */
+ if ( dev->state & NET80211_WAITING ) {
+ /* Sanity check */
+ if ( ! dev->associating )
+ return;
+
+ if ( currticks() - dev->ctx.assoc->last_packet > ASSOC_TIMEOUT ) {
+ /* Timed out - fail if too many retries, or retry */
+ dev->ctx.assoc->times_tried++;
+ if ( ++dev->ctx.assoc->times_tried > ASSOC_RETRIES ) {
+ rc = -ETIMEDOUT;
+ goto fail;
+ }
+ } else {
+ /* Didn't time out - let it keep going */
+ return;
+ }
+ } else {
+ if ( dev->state & NET80211_PROBED )
+ dev->ctx.assoc->times_tried = 0;
+ }
+
+ if ( ! ( dev->state & NET80211_PROBED ) ) {
+ /* state: probe */
+
+ if ( ! dev->ctx.probe ) {
+ /* start probe */
+ int active = fetch_intz_setting ( NULL,
+ &net80211_active_setting );
+ int band = dev->hw->bands;
+
+ if ( active )
+ band &= ~NET80211_BAND_BIT_5GHZ;
+
+ rc = net80211_prepare_probe ( dev, band, active );
+ if ( rc )
+ goto fail;
+
+ dev->ctx.probe = net80211_probe_start ( dev, dev->essid,
+ active );
+ if ( ! dev->ctx.probe ) {
+ dev->assoc_rc = -ENOMEM;
+ goto fail;
+ }
+ }
+
+ rc = net80211_probe_step ( dev->ctx.probe );
+ if ( ! rc ) {
+ return; /* still going */
+ }
+
+ dev->associating = net80211_probe_finish_best ( dev->ctx.probe );
+ dev->ctx.probe = NULL;
+ if ( ! dev->associating ) {
+ if ( rc > 0 ) /* "successful" probe found nothing */
+ rc = -ETIMEDOUT;
+ goto fail;
+ }
+
+ /* If we probed using a broadcast SSID, record that
+ fact for the settings applicator before we clobber
+ it with the specific SSID we've chosen. */
+ if ( ! dev->essid[0] )
+ dev->state |= NET80211_AUTO_SSID;
+
+ DBGC ( dev, "802.11 %p found network %s (%s)\n", dev,
+ dev->associating->essid,
+ eth_ntoa ( dev->associating->bssid ) );
+
+ dev->ctx.assoc = zalloc ( sizeof ( *dev->ctx.assoc ) );
+ if ( ! dev->ctx.assoc ) {
+ rc = -ENOMEM;
+ goto fail;
+ }
+
+ dev->state |= NET80211_PROBED;
+ dev->ctx.assoc->method = IEEE80211_AUTH_OPEN_SYSTEM;
+
+ return;
+ }
+
+ /* Record time of sending the packet we're about to send, for timeout */
+ dev->ctx.assoc->last_packet = currticks();
+
+ if ( ! ( dev->state & NET80211_AUTHENTICATED ) ) {
+ /* state: prepare and authenticate */
+
+ if ( status != IEEE80211_STATUS_SUCCESS ) {
+ /* we tried authenticating already, but failed */
+ int method = dev->ctx.assoc->method;
+
+ if ( method == IEEE80211_AUTH_OPEN_SYSTEM &&
+ ( status == IEEE80211_STATUS_AUTH_CHALL_INVALID ||
+ status == IEEE80211_STATUS_AUTH_ALGO_UNSUPP ) ) {
+ /* Maybe this network uses Shared Key? */
+ dev->ctx.assoc->method =
+ IEEE80211_AUTH_SHARED_KEY;
+ } else {
+ goto fail;
+ }
+ }
+
+ DBGC ( dev, "802.11 %p authenticating with method %d\n", dev,
+ dev->ctx.assoc->method );
+
+ rc = net80211_prepare_assoc ( dev, dev->associating );
+ if ( rc )
+ goto fail;
+
+ rc = net80211_send_auth ( dev, dev->associating,
+ dev->ctx.assoc->method );
+ if ( rc )
+ goto fail;
+
+ return;
+ }
+
+ if ( ! ( dev->state & NET80211_ASSOCIATED ) ) {
+ /* state: associate */
+
+ if ( status != IEEE80211_STATUS_SUCCESS )
+ goto fail;
+
+ DBGC ( dev, "802.11 %p associating\n", dev );
+
+ if ( dev->handshaker && dev->handshaker->start &&
+ ! dev->handshaker->started ) {
+ rc = dev->handshaker->start ( dev );
+ if ( rc < 0 )
+ goto fail;
+ dev->handshaker->started = 1;
+ }
+
+ rc = net80211_send_assoc ( dev, dev->associating );
+ if ( rc )
+ goto fail;
+
+ return;
+ }
+
+ if ( ! ( dev->state & NET80211_CRYPTO_SYNCED ) ) {
+ /* state: crypto sync */
+ DBGC ( dev, "802.11 %p security handshaking\n", dev );
+
+ if ( ! dev->handshaker || ! dev->handshaker->step ) {
+ dev->state |= NET80211_CRYPTO_SYNCED;
+ return;
+ }
+
+ rc = dev->handshaker->step ( dev );
+
+ if ( rc < 0 ) {
+ /* Only record the returned error if we're
+ still marked as associated, because an
+ asynchronous error will have already been
+ reported to net80211_deauthenticate() and
+ assoc_rc thereby set. */
+ if ( dev->state & NET80211_ASSOCIATED )
+ dev->assoc_rc = rc;
+ rc = 0;
+ goto fail;
+ }
+
+ if ( rc > 0 ) {
+ dev->assoc_rc = 0;
+ dev->state |= NET80211_CRYPTO_SYNCED;
+ }
+ return;
+ }
+
+ /* state: done! */
+ netdev_link_up ( dev->netdev );
+ dev->assoc_rc = 0;
+ dev->state &= ~NET80211_WORKING;
+
+ free ( dev->ctx.assoc );
+ dev->ctx.assoc = NULL;
+
+ net80211_free_wlan ( dev->associating );
+ dev->associating = NULL;
+
+ dev->rctl = rc80211_init ( dev );
+
+ process_del ( &dev->proc_assoc );
+
+ DBGC ( dev, "802.11 %p associated with %s (%s)\n", dev,
+ dev->essid, eth_ntoa ( dev->bssid ) );
+
+ return;
+
+ fail:
+ dev->state &= ~( NET80211_WORKING | NET80211_WAITING );
+ if ( rc )
+ dev->assoc_rc = rc;
+
+ netdev_link_err ( dev->netdev, dev->assoc_rc );
+
+ /* We never reach here from the middle of a probe, so we don't
+ need to worry about freeing dev->ctx.probe. */
+
+ if ( dev->state & NET80211_PROBED ) {
+ free ( dev->ctx.assoc );
+ dev->ctx.assoc = NULL;
+ }
+
+ net80211_free_wlan ( dev->associating );
+ dev->associating = NULL;
+
+ process_del ( &dev->proc_assoc );
+
+ DBGC ( dev, "802.11 %p association failed (state=%04x): "
+ "%s\n", dev, dev->state, strerror ( dev->assoc_rc ) );
+
+ /* Try it again: */
+ net80211_autoassociate ( dev );
+}
+
+/**
+ * Check for 802.11 SSID or key updates
+ *
+ * This acts as a settings applicator; if the user changes netX/ssid,
+ * and netX is currently open, the association task will be invoked
+ * again. If the user changes the encryption key, the current security
+ * handshaker will be asked to update its state to match; if that is
+ * impossible without reassociation, we reassociate.
+ */
+static int net80211_check_settings_update ( void )
+{
+ struct net80211_device *dev;
+ char ssid[IEEE80211_MAX_SSID_LEN + 1];
+ int key_reassoc;
+
+ list_for_each_entry ( dev, &net80211_devices, list ) {
+ if ( ! netdev_is_open ( dev->netdev ) )
+ continue;
+
+ key_reassoc = 0;
+ if ( dev->handshaker && dev->handshaker->change_key &&
+ dev->handshaker->change_key ( dev ) < 0 )
+ key_reassoc = 1;
+
+ fetch_string_setting ( netdev_settings ( dev->netdev ),
+ &net80211_ssid_setting, ssid,
+ IEEE80211_MAX_SSID_LEN + 1 );
+
+ if ( key_reassoc ||
+ ( ! ( ! ssid[0] && ( dev->state & NET80211_AUTO_SSID ) ) &&
+ strcmp ( ssid, dev->essid ) != 0 ) ) {
+ DBGC ( dev, "802.11 %p updating association: "
+ "%s -> %s\n", dev, dev->essid, ssid );
+ net80211_autoassociate ( dev );
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * Start 802.11 association process
+ *
+ * @v dev 802.11 device
+ *
+ * If the association process is running, it will be restarted.
+ */
+void net80211_autoassociate ( struct net80211_device *dev )
+{
+ if ( ! ( dev->state & NET80211_WORKING ) ) {
+ DBGC2 ( dev, "802.11 %p spawning association process\n", dev );
+ process_add ( &dev->proc_assoc );
+ } else {
+ DBGC2 ( dev, "802.11 %p restarting association\n", dev );
+ }
+
+ /* Clean up everything an earlier association process might
+ have been in the middle of using */
+ if ( dev->associating )
+ net80211_free_wlan ( dev->associating );
+
+ if ( ! ( dev->state & NET80211_PROBED ) )
+ net80211_free_wlan (
+ net80211_probe_finish_best ( dev->ctx.probe ) );
+ else
+ free ( dev->ctx.assoc );
+
+ /* Reset to a clean state */
+ fetch_string_setting ( netdev_settings ( dev->netdev ),
+ &net80211_ssid_setting, dev->essid,
+ IEEE80211_MAX_SSID_LEN + 1 );
+ dev->ctx.probe = NULL;
+ dev->associating = NULL;
+ dev->assoc_rc = 0;
+ net80211_set_state ( dev, NET80211_PROBED, NET80211_WORKING, 0 );
+}
+
+/**
+ * Pick TX rate for RTS/CTS packets based on data rate
+ *
+ * @v dev 802.11 device
+ *
+ * The RTS/CTS rate is the fastest TX rate marked as "basic" that is
+ * not faster than the data rate.
+ */
+static void net80211_set_rtscts_rate ( struct net80211_device *dev )
+{
+ u16 datarate = dev->rates[dev->rate];
+ u16 rtsrate = 0;
+ int rts_idx = -1;
+ int i;
+
+ for ( i = 0; i < dev->nr_rates; i++ ) {
+ u16 rate = dev->rates[i];
+
+ if ( ! ( dev->basic_rates & ( 1 << i ) ) || rate > datarate )
+ continue;
+
+ if ( rate > rtsrate ) {
+ rtsrate = rate;
+ rts_idx = i;
+ }
+ }
+
+ /* If this is in initialization, we might not have any basic
+ rates; just use the first data rate in that case. */
+ if ( rts_idx < 0 )
+ rts_idx = 0;
+
+ dev->rtscts_rate = rts_idx;
+}
+
+/**
+ * Set data transmission rate for 802.11 device
+ *
+ * @v dev 802.11 device
+ * @v rate Rate to set, as index into @c dev->rates array
+ */
+void net80211_set_rate_idx ( struct net80211_device *dev, int rate )
+{
+ assert ( netdev_is_open ( dev->netdev ) );
+
+ if ( rate >= 0 && rate < dev->nr_rates && rate != dev->rate ) {
+ DBGC2 ( dev, "802.11 %p changing rate from %d->%d Mbps\n",
+ dev, dev->rates[dev->rate] / 10,
+ dev->rates[rate] / 10 );
+
+ dev->rate = rate;
+ net80211_set_rtscts_rate ( dev );
+ dev->op->config ( dev, NET80211_CFG_RATE );
+ }
+}
+
+/**
+ * Configure 802.11 device to transmit on a certain channel
+ *
+ * @v dev 802.11 device
+ * @v channel Channel number (1-11 for 2.4GHz) to transmit on
+ */
+int net80211_change_channel ( struct net80211_device *dev, int channel )
+{
+ int i, oldchan = dev->channel;
+
+ assert ( netdev_is_open ( dev->netdev ) );
+
+ for ( i = 0; i < dev->nr_channels; i++ ) {
+ if ( dev->channels[i].channel_nr == channel ) {
+ dev->channel = i;
+ break;
+ }
+ }
+
+ if ( i == dev->nr_channels )
+ return -ENOENT;
+
+ if ( i != oldchan )
+ return dev->op->config ( dev, NET80211_CFG_CHANNEL );
+
+ return 0;
+}
+
+/**
+ * Prepare 802.11 device channel and rate set for scanning
+ *
+ * @v dev 802.11 device
+ * @v band RF band(s) on which to prepare for scanning
+ * @v active Whether the scanning will be active
+ * @ret rc Return status code
+ */
+int net80211_prepare_probe ( struct net80211_device *dev, int band,
+ int active )
+{
+ assert ( netdev_is_open ( dev->netdev ) );
+
+ if ( active && ( band & NET80211_BAND_BIT_5GHZ ) ) {
+ DBGC ( dev, "802.11 %p cannot perform active scanning on "
+ "5GHz band\n", dev );
+ return -EINVAL_ACTIVE_SCAN;
+ }
+
+ if ( band == 0 ) {
+ /* This can happen for a 5GHz-only card with 5GHz
+ scanning masked out by an active request. */
+ DBGC ( dev, "802.11 %p asked to prepare for scanning nothing\n",
+ dev );
+ return -EINVAL_ACTIVE_SCAN;
+ }
+
+ dev->nr_channels = 0;
+
+ if ( active )
+ net80211_add_channels ( dev, 1, 11, NET80211_REG_TXPOWER );
+ else {
+ if ( band & NET80211_BAND_BIT_2GHZ )
+ net80211_add_channels ( dev, 1, 14,
+ NET80211_REG_TXPOWER );
+ if ( band & NET80211_BAND_BIT_5GHZ )
+ net80211_add_channels ( dev, 36, 8,
+ NET80211_REG_TXPOWER );
+ }
+
+ net80211_filter_hw_channels ( dev );
+
+ /* Use channel 1 for now */
+ dev->channel = 0;
+ dev->op->config ( dev, NET80211_CFG_CHANNEL );
+
+ /* Always do active probes at lowest (presumably first) speed */
+ dev->rate = 0;
+ dev->nr_rates = 1;
+ dev->rates[0] = dev->hw->rates[dev->channels[0].band][0];
+ dev->op->config ( dev, NET80211_CFG_RATE );
+
+ return 0;
+}
+
+/**
+ * Prepare 802.11 device channel and rate set for communication
+ *
+ * @v dev 802.11 device
+ * @v wlan WLAN to prepare for communication with
+ * @ret rc Return status code
+ */
+int net80211_prepare_assoc ( struct net80211_device *dev,
+ struct net80211_wlan *wlan )
+{
+ struct ieee80211_frame *hdr = wlan->beacon->data;
+ struct ieee80211_beacon *beacon =
+ ( struct ieee80211_beacon * ) hdr->data;
+ struct net80211_handshaker *handshaker;
+ int rc;
+
+ assert ( netdev_is_open ( dev->netdev ) );
+
+ net80211_set_state ( dev, NET80211_ASSOCIATED, 0, 0 );
+ memcpy ( dev->bssid, wlan->bssid, ETH_ALEN );
+ strcpy ( dev->essid, wlan->essid );
+
+ free ( dev->rsn_ie );
+ dev->rsn_ie = NULL;
+
+ dev->last_beacon_timestamp = beacon->timestamp;
+ dev->tx_beacon_interval = 1024 * beacon->beacon_interval;
+
+ /* Barring an IE that tells us the channel outright, assume
+ the channel we heard this AP best on is the channel it's
+ communicating on. */
+ net80211_change_channel ( dev, wlan->channel );
+
+ rc = net80211_process_capab ( dev, beacon->capability );
+ if ( rc )
+ return rc;
+
+ rc = net80211_process_ie ( dev, beacon->info_element,
+ wlan->beacon->tail );
+ if ( rc )
+ return rc;
+
+ /* Associate at the lowest rate so we know it'll get through */
+ dev->rate = 0;
+ dev->op->config ( dev, NET80211_CFG_RATE );
+
+ /* Free old handshaker and crypto, if they exist */
+ if ( dev->handshaker && dev->handshaker->stop &&
+ dev->handshaker->started )
+ dev->handshaker->stop ( dev );
+ free ( dev->handshaker );
+ dev->handshaker = NULL;
+ free ( dev->crypto );
+ free ( dev->gcrypto );
+ dev->crypto = dev->gcrypto = NULL;
+
+ /* Find new security handshaker to use */
+ for_each_table_entry ( handshaker, NET80211_HANDSHAKERS ) {
+ if ( handshaker->protocol == wlan->handshaking ) {
+ dev->handshaker = zalloc ( sizeof ( *handshaker ) +
+ handshaker->priv_len );
+ if ( ! dev->handshaker )
+ return -ENOMEM;
+
+ memcpy ( dev->handshaker, handshaker,
+ sizeof ( *handshaker ) );
+ dev->handshaker->priv = ( ( void * ) dev->handshaker +
+ sizeof ( *handshaker ) );
+ break;
+ }
+ }
+
+ if ( ( wlan->handshaking != NET80211_SECPROT_NONE ) &&
+ ! dev->handshaker ) {
+ DBGC ( dev, "802.11 %p no support for handshaking scheme %d\n",
+ dev, wlan->handshaking );
+ return -( ENOTSUP | ( wlan->handshaking << 8 ) );
+ }
+
+ /* Initialize security handshaker */
+ if ( dev->handshaker ) {
+ rc = dev->handshaker->init ( dev );
+ if ( rc < 0 )
+ return rc;
+ }
+
+ return 0;
+}
+
+/**
+ * Send 802.11 initial authentication frame
+ *
+ * @v dev 802.11 device
+ * @v wlan WLAN to authenticate with
+ * @v method Authentication method
+ * @ret rc Return status code
+ *
+ * @a method may be 0 for Open System authentication or 1 for Shared
+ * Key authentication. Open System provides no security in association
+ * whatsoever, relying on encryption for confidentiality, but Shared
+ * Key actively introduces security problems and is very rarely used.
+ */
+int net80211_send_auth ( struct net80211_device *dev,
+ struct net80211_wlan *wlan, int method )
+{
+ struct io_buffer *iob = alloc_iob ( 64 );
+ struct ieee80211_auth *auth;
+
+ net80211_set_state ( dev, 0, NET80211_WAITING, 0 );
+ iob_reserve ( iob, IEEE80211_TYP_FRAME_HEADER_LEN );
+ auth = iob_put ( iob, sizeof ( *auth ) );
+ auth->algorithm = method;
+ auth->tx_seq = 1;
+ auth->status = 0;
+
+ return net80211_tx_mgmt ( dev, IEEE80211_STYPE_AUTH, wlan->bssid, iob );
+}
+
+/**
+ * Handle receipt of 802.11 authentication frame
+ *
+ * @v dev 802.11 device
+ * @v iob I/O buffer
+ *
+ * If the authentication method being used is Shared Key, and the
+ * frame that was received included challenge text, the frame is
+ * encrypted using the cryptosystem currently in effect and sent back
+ * to the AP to complete the authentication.
+ */
+static void net80211_handle_auth ( struct net80211_device *dev,
+ struct io_buffer *iob )
+{
+ struct ieee80211_frame *hdr = iob->data;
+ struct ieee80211_auth *auth =
+ ( struct ieee80211_auth * ) hdr->data;
+
+ if ( auth->tx_seq & 1 ) {
+ DBGC ( dev, "802.11 %p authentication received improperly "
+ "directed frame (seq. %d)\n", dev, auth->tx_seq );
+ net80211_set_state ( dev, NET80211_WAITING, 0,
+ IEEE80211_STATUS_FAILURE );
+ return;
+ }
+
+ if ( auth->status != IEEE80211_STATUS_SUCCESS ) {
+ DBGC ( dev, "802.11 %p authentication failed: status %d\n",
+ dev, auth->status );
+ net80211_set_state ( dev, NET80211_WAITING, 0,
+ auth->status );
+ return;
+ }
+
+ if ( auth->algorithm == IEEE80211_AUTH_SHARED_KEY && ! dev->crypto ) {
+ DBGC ( dev, "802.11 %p can't perform shared-key authentication "
+ "without a cryptosystem\n", dev );
+ net80211_set_state ( dev, NET80211_WAITING, 0,
+ IEEE80211_STATUS_FAILURE );
+ return;
+ }
+
+ if ( auth->algorithm == IEEE80211_AUTH_SHARED_KEY &&
+ auth->tx_seq == 2 ) {
+ /* Since the iob we got is going to be freed as soon
+ as we return, we can do some in-place
+ modification. */
+ auth->tx_seq = 3;
+ auth->status = 0;
+
+ memcpy ( hdr->addr2, hdr->addr1, ETH_ALEN );
+ memcpy ( hdr->addr1, hdr->addr3, ETH_ALEN );
+
+ netdev_tx ( dev->netdev,
+ dev->crypto->encrypt ( dev->crypto, iob ) );
+ return;
+ }
+
+ net80211_set_state ( dev, NET80211_WAITING, NET80211_AUTHENTICATED,
+ IEEE80211_STATUS_SUCCESS );
+
+ return;
+}
+
+/**
+ * Send 802.11 association frame
+ *
+ * @v dev 802.11 device
+ * @v wlan WLAN to associate with
+ * @ret rc Return status code
+ */
+int net80211_send_assoc ( struct net80211_device *dev,
+ struct net80211_wlan *wlan )
+{
+ struct io_buffer *iob = alloc_iob ( 128 );
+ struct ieee80211_assoc_req *assoc;
+ union ieee80211_ie *ie;
+
+ net80211_set_state ( dev, 0, NET80211_WAITING, 0 );
+
+ iob_reserve ( iob, IEEE80211_TYP_FRAME_HEADER_LEN );
+ assoc = iob->data;
+
+ assoc->capability = IEEE80211_CAPAB_MANAGED;
+ if ( ! ( dev->hw->flags & NET80211_HW_NO_SHORT_PREAMBLE ) )
+ assoc->capability |= IEEE80211_CAPAB_SHORT_PMBL;
+ if ( ! ( dev->hw->flags & NET80211_HW_NO_SHORT_SLOT ) )
+ assoc->capability |= IEEE80211_CAPAB_SHORT_SLOT;
+ if ( wlan->crypto )
+ assoc->capability |= IEEE80211_CAPAB_PRIVACY;
+
+ assoc->listen_interval = 1;
+
+ ie = net80211_marshal_request_info ( dev, assoc->info_element );
+
+ DBGP ( "802.11 %p about to send association request:\n", dev );
+ DBGP_HD ( iob->data, ( void * ) ie - iob->data );
+
+ iob_put ( iob, ( void * ) ie - iob->data );
+
+ return net80211_tx_mgmt ( dev, IEEE80211_STYPE_ASSOC_REQ,
+ wlan->bssid, iob );
+}
+
+/**
+ * Handle receipt of 802.11 association reply frame
+ *
+ * @v dev 802.11 device
+ * @v iob I/O buffer
+ */
+static void net80211_handle_assoc_reply ( struct net80211_device *dev,
+ struct io_buffer *iob )
+{
+ struct ieee80211_frame *hdr = iob->data;
+ struct ieee80211_assoc_resp *assoc =
+ ( struct ieee80211_assoc_resp * ) hdr->data;
+
+ net80211_process_capab ( dev, assoc->capability );
+ net80211_process_ie ( dev, assoc->info_element, iob->tail );
+
+ if ( assoc->status != IEEE80211_STATUS_SUCCESS ) {
+ DBGC ( dev, "802.11 %p association failed: status %d\n",
+ dev, assoc->status );
+ net80211_set_state ( dev, NET80211_WAITING, 0,
+ assoc->status );
+ return;
+ }
+
+ /* ESSID was filled before the association request was sent */
+ memcpy ( dev->bssid, hdr->addr3, ETH_ALEN );
+ dev->aid = assoc->aid;
+
+ net80211_set_state ( dev, NET80211_WAITING, NET80211_ASSOCIATED,
+ IEEE80211_STATUS_SUCCESS );
+}
+
+
+/**
+ * Send 802.11 disassociation frame
+ *
+ * @v dev 802.11 device
+ * @v reason Reason for disassociation
+ * @v deauth If TRUE, send deauthentication instead of disassociation
+ * @ret rc Return status code
+ */
+static int net80211_send_disassoc ( struct net80211_device *dev, int reason,
+ int deauth )
+{
+ struct io_buffer *iob = alloc_iob ( 64 );
+ struct ieee80211_disassoc *disassoc;
+
+ if ( ! ( dev->state & NET80211_ASSOCIATED ) )
+ return -EINVAL;
+
+ net80211_set_state ( dev, NET80211_ASSOCIATED, 0, 0 );
+ iob_reserve ( iob, IEEE80211_TYP_FRAME_HEADER_LEN );
+ disassoc = iob_put ( iob, sizeof ( *disassoc ) );
+ disassoc->reason = reason;
+
+ return net80211_tx_mgmt ( dev, deauth ? IEEE80211_STYPE_DEAUTH :
+ IEEE80211_STYPE_DISASSOC, dev->bssid, iob );
+}
+
+
+/**
+ * Deauthenticate from current network and try again
+ *
+ * @v dev 802.11 device
+ * @v rc Return status code indicating reason
+ *
+ * The deauthentication will be sent using an 802.11 "unspecified
+ * reason", as is common, but @a rc will be set as a link-up
+ * error to aid the user in debugging.
+ */
+void net80211_deauthenticate ( struct net80211_device *dev, int rc )
+{
+ net80211_send_disassoc ( dev, IEEE80211_REASON_UNSPECIFIED, 1 );
+ dev->assoc_rc = rc;
+ netdev_link_err ( dev->netdev, rc );
+
+ net80211_autoassociate ( dev );
+}
+
+
+/** Smoothing factor (1-7) for link quality calculation */
+#define LQ_SMOOTH 7
+
+/**
+ * Update link quality information based on received beacon
+ *
+ * @v dev 802.11 device
+ * @v iob I/O buffer containing beacon
+ * @ret rc Return status code
+ */
+static void net80211_update_link_quality ( struct net80211_device *dev,
+ struct io_buffer *iob )
+{
+ struct ieee80211_frame *hdr = iob->data;
+ struct ieee80211_beacon *beacon;
+ u32 dt, rxi;
+
+ if ( ! ( dev->state & NET80211_ASSOCIATED ) )
+ return;
+
+ beacon = ( struct ieee80211_beacon * ) hdr->data;
+ dt = ( u32 ) ( beacon->timestamp - dev->last_beacon_timestamp );
+ rxi = dev->rx_beacon_interval;
+
+ rxi = ( LQ_SMOOTH * rxi ) + ( ( 8 - LQ_SMOOTH ) * dt );
+ dev->rx_beacon_interval = rxi >> 3;
+
+ dev->last_beacon_timestamp = beacon->timestamp;
+}
+
+
+/**
+ * Handle receipt of 802.11 management frame
+ *
+ * @v dev 802.11 device
+ * @v iob I/O buffer
+ * @v signal Signal strength of received frame
+ */
+static void net80211_handle_mgmt ( struct net80211_device *dev,
+ struct io_buffer *iob, int signal )
+{
+ struct ieee80211_frame *hdr = iob->data;
+ struct ieee80211_disassoc *disassoc;
+ u16 stype = hdr->fc & IEEE80211_FC_SUBTYPE;
+ int keep = 0;
+ int is_deauth = ( stype == IEEE80211_STYPE_DEAUTH );
+
+ if ( ( hdr->fc & IEEE80211_FC_TYPE ) != IEEE80211_TYPE_MGMT ) {
+ free_iob ( iob );
+ return; /* only handle management frames */
+ }
+
+ switch ( stype ) {
+ /* We reconnect on deauthentication and disassociation. */
+ case IEEE80211_STYPE_DEAUTH:
+ case IEEE80211_STYPE_DISASSOC:
+ disassoc = ( struct ieee80211_disassoc * ) hdr->data;
+ net80211_set_state ( dev, is_deauth ? NET80211_AUTHENTICATED :
+ NET80211_ASSOCIATED, 0,
+ NET80211_IS_REASON | disassoc->reason );
+ DBGC ( dev, "802.11 %p %s: reason %d\n",
+ dev, is_deauth ? "deauthenticated" : "disassociated",
+ disassoc->reason );
+
+ /* Try to reassociate, in case it's transient. */
+ net80211_autoassociate ( dev );
+
+ break;
+
+ /* We handle authentication and association. */
+ case IEEE80211_STYPE_AUTH:
+ if ( ! ( dev->state & NET80211_AUTHENTICATED ) )
+ net80211_handle_auth ( dev, iob );
+ break;
+
+ case IEEE80211_STYPE_ASSOC_RESP:
+ case IEEE80211_STYPE_REASSOC_RESP:
+ if ( ! ( dev->state & NET80211_ASSOCIATED ) )
+ net80211_handle_assoc_reply ( dev, iob );
+ break;
+
+ /* We pass probes and beacons onto network scanning
+ code. Pass actions for future extensibility. */
+ case IEEE80211_STYPE_BEACON:
+ net80211_update_link_quality ( dev, iob );
+ /* fall through */
+ case IEEE80211_STYPE_PROBE_RESP:
+ case IEEE80211_STYPE_ACTION:
+ if ( dev->keep_mgmt ) {
+ struct net80211_rx_info *rxinf;
+ rxinf = zalloc ( sizeof ( *rxinf ) );
+ if ( ! rxinf ) {
+ DBGC ( dev, "802.11 %p out of memory\n", dev );
+ break;
+ }
+ rxinf->signal = signal;
+ list_add_tail ( &iob->list, &dev->mgmt_queue );
+ list_add_tail ( &rxinf->list, &dev->mgmt_info_queue );
+ keep = 1;
+ }
+ break;
+
+ case IEEE80211_STYPE_PROBE_REQ:
+ /* Some nodes send these broadcast. Ignore them. */
+ break;
+
+ case IEEE80211_STYPE_ASSOC_REQ:
+ case IEEE80211_STYPE_REASSOC_REQ:
+ /* We should never receive these, only send them. */
+ DBGC ( dev, "802.11 %p received strange management request "
+ "(%04x)\n", dev, stype );
+ break;
+
+ default:
+ DBGC ( dev, "802.11 %p received unimplemented management "
+ "packet (%04x)\n", dev, stype );
+ break;
+ }
+
+ if ( ! keep )
+ free_iob ( iob );
+}
+
+/* ---------- Packet handling functions ---------- */
+
+/**
+ * Free buffers used by 802.11 fragment cache entry
+ *
+ * @v dev 802.11 device
+ * @v fcid Fragment cache entry index
+ *
+ * After this function, the referenced entry will be marked unused.
+ */
+static void net80211_free_frags ( struct net80211_device *dev, int fcid )
+{
+ int j;
+ struct net80211_frag_cache *frag = &dev->frags[fcid];
+
+ for ( j = 0; j < 16; j++ ) {
+ if ( frag->iob[j] ) {
+ free_iob ( frag->iob[j] );
+ frag->iob[j] = NULL;
+ }
+ }
+
+ frag->seqnr = 0;
+ frag->start_ticks = 0;
+ frag->in_use = 0;
+}
+
+/**
+ * Accumulate 802.11 fragments into one I/O buffer
+ *
+ * @v dev 802.11 device
+ * @v fcid Fragment cache entry index
+ * @v nfrags Number of fragments received
+ * @v size Sum of sizes of all fragments, including headers
+ * @ret iob I/O buffer containing reassembled packet
+ *
+ * This function does not free the fragment buffers.
+ */
+static struct io_buffer *net80211_accum_frags ( struct net80211_device *dev,
+ int fcid, int nfrags, int size )
+{
+ struct net80211_frag_cache *frag = &dev->frags[fcid];
+ int hdrsize = IEEE80211_TYP_FRAME_HEADER_LEN;
+ int nsize = size - hdrsize * ( nfrags - 1 );
+ int i;
+
+ struct io_buffer *niob = alloc_iob ( nsize );
+ struct ieee80211_frame *hdr;
+
+ /* Add the header from the first one... */
+ memcpy ( iob_put ( niob, hdrsize ), frag->iob[0]->data, hdrsize );
+
+ /* ... and all the data from all of them. */
+ for ( i = 0; i < nfrags; i++ ) {
+ int len = iob_len ( frag->iob[i] ) - hdrsize;
+ memcpy ( iob_put ( niob, len ),
+ frag->iob[i]->data + hdrsize, len );
+ }
+
+ /* Turn off the fragment bit. */
+ hdr = niob->data;
+ hdr->fc &= ~IEEE80211_FC_MORE_FRAG;
+
+ return niob;
+}
+
+/**
+ * Handle receipt of 802.11 fragment
+ *
+ * @v dev 802.11 device
+ * @v iob I/O buffer containing fragment
+ * @v signal Signal strength with which fragment was received
+ */
+static void net80211_rx_frag ( struct net80211_device *dev,
+ struct io_buffer *iob, int signal )
+{
+ struct ieee80211_frame *hdr = iob->data;
+ int fragnr = IEEE80211_FRAG ( hdr->seq );
+
+ if ( fragnr == 0 && ( hdr->fc & IEEE80211_FC_MORE_FRAG ) ) {
+ /* start a frag cache entry */
+ int i, newest = -1;
+ u32 curr_ticks = currticks(), newest_ticks = 0;
+ u32 timeout = ticks_per_sec() * NET80211_FRAG_TIMEOUT;
+
+ for ( i = 0; i < NET80211_NR_CONCURRENT_FRAGS; i++ ) {
+ if ( dev->frags[i].in_use == 0 )
+ break;
+
+ if ( dev->frags[i].start_ticks + timeout >=
+ curr_ticks ) {
+ net80211_free_frags ( dev, i );
+ break;
+ }
+
+ if ( dev->frags[i].start_ticks > newest_ticks ) {
+ newest = i;
+ newest_ticks = dev->frags[i].start_ticks;
+ }
+ }
+
+ /* If we're being sent more concurrent fragmented
+ packets than we can handle, drop the newest so the
+ older ones have time to complete. */
+ if ( i == NET80211_NR_CONCURRENT_FRAGS ) {
+ i = newest;
+ net80211_free_frags ( dev, i );
+ }
+
+ dev->frags[i].in_use = 1;
+ dev->frags[i].seqnr = IEEE80211_SEQNR ( hdr->seq );
+ dev->frags[i].start_ticks = currticks();
+ dev->frags[i].iob[0] = iob;
+ return;
+ } else {
+ int i;
+ for ( i = 0; i < NET80211_NR_CONCURRENT_FRAGS; i++ ) {
+ if ( dev->frags[i].in_use && dev->frags[i].seqnr ==
+ IEEE80211_SEQNR ( hdr->seq ) )
+ break;
+ }
+ if ( i == NET80211_NR_CONCURRENT_FRAGS ) {
+ /* Drop non-first not-in-cache fragments */
+ DBGC ( dev, "802.11 %p dropped fragment fc=%04x "
+ "seq=%04x\n", dev, hdr->fc, hdr->seq );
+ free_iob ( iob );
+ return;
+ }
+
+ dev->frags[i].iob[fragnr] = iob;
+
+ if ( ! ( hdr->fc & IEEE80211_FC_MORE_FRAG ) ) {
+ int j, size = 0;
+ for ( j = 0; j < fragnr; j++ ) {
+ size += iob_len ( dev->frags[i].iob[j] );
+ if ( dev->frags[i].iob[j] == NULL )
+ break;
+ }
+ if ( j == fragnr ) {
+ /* We've got everything */
+ struct io_buffer *niob =
+ net80211_accum_frags ( dev, i, fragnr,
+ size );
+ net80211_free_frags ( dev, i );
+ net80211_rx ( dev, niob, signal, 0 );
+ } else {
+ DBGC ( dev, "802.11 %p dropping fragmented "
+ "packet due to out-of-order arrival, "
+ "fc=%04x seq=%04x\n", dev, hdr->fc,
+ hdr->seq );
+ net80211_free_frags ( dev, i );
+ }
+ }
+ }
+}
+
+/**
+ * Handle receipt of 802.11 frame
+ *
+ * @v dev 802.11 device
+ * @v iob I/O buffer
+ * @v signal Received signal strength
+ * @v rate Bitrate at which frame was received, in 100 kbps units
+ *
+ * If the rate or signal is unknown, 0 should be passed.
+ */
+void net80211_rx ( struct net80211_device *dev, struct io_buffer *iob,
+ int signal, u16 rate )
+{
+ struct ieee80211_frame *hdr = iob->data;
+ u16 type = hdr->fc & IEEE80211_FC_TYPE;
+ if ( ( hdr->fc & IEEE80211_FC_VERSION ) != IEEE80211_THIS_VERSION )
+ goto drop; /* drop invalid-version packets */
+
+ if ( type == IEEE80211_TYPE_CTRL )
+ goto drop; /* we don't handle control packets,
+ the hardware does */
+
+ if ( dev->last_rx_seq == hdr->seq )
+ goto drop; /* avoid duplicate packet */
+ dev->last_rx_seq = hdr->seq;
+
+ if ( dev->hw->flags & NET80211_HW_RX_HAS_FCS ) {
+ /* discard the FCS */
+ iob_unput ( iob, 4 );
+ }
+
+ /* Only decrypt packets from our BSSID, to avoid spurious errors */
+ if ( ( hdr->fc & IEEE80211_FC_PROTECTED ) &&
+ ! memcmp ( hdr->addr2, dev->bssid, ETH_ALEN ) ) {
+ /* Decrypt packet; record and drop if it fails */
+ struct io_buffer *niob;
+ struct net80211_crypto *crypto = dev->crypto;
+
+ if ( ! dev->crypto ) {
+ DBGC ( dev, "802.11 %p cannot decrypt packet "
+ "without a cryptosystem\n", dev );
+ goto drop_crypt;
+ }
+
+ if ( ( hdr->addr1[0] & 1 ) && dev->gcrypto ) {
+ /* Use group decryption if needed */
+ crypto = dev->gcrypto;
+ }
+
+ niob = crypto->decrypt ( crypto, iob );
+ if ( ! niob ) {
+ DBGC ( dev, "802.11 %p decryption error\n", dev );
+ goto drop_crypt;
+ }
+ free_iob ( iob );
+ iob = niob;
+ hdr = iob->data;
+ }
+
+ dev->last_signal = signal;
+
+ /* Fragments go into the frag cache or get dropped. */
+ if ( IEEE80211_FRAG ( hdr->seq ) != 0
+ || ( hdr->fc & IEEE80211_FC_MORE_FRAG ) ) {
+ net80211_rx_frag ( dev, iob, signal );
+ return;
+ }
+
+ /* Management frames get handled, enqueued, or dropped. */
+ if ( type == IEEE80211_TYPE_MGMT ) {
+ net80211_handle_mgmt ( dev, iob, signal );
+ return;
+ }
+
+ /* Data frames get dropped or sent to the net_device. */
+ if ( ( hdr->fc & IEEE80211_FC_SUBTYPE ) != IEEE80211_STYPE_DATA )
+ goto drop; /* drop QoS, CFP, or null data packets */
+
+ /* Update rate-control algorithm */
+ if ( dev->rctl )
+ rc80211_update_rx ( dev, hdr->fc & IEEE80211_FC_RETRY, rate );
+
+ /* Pass packet onward */
+ if ( dev->state & NET80211_ASSOCIATED ) {
+ netdev_rx ( dev->netdev, iob );
+ return;
+ }
+
+ /* No association? Drop it. */
+ goto drop;
+
+ drop_crypt:
+ netdev_rx_err ( dev->netdev, NULL, EINVAL_CRYPTO_REQUEST );
+ drop:
+ DBGC2 ( dev, "802.11 %p dropped packet fc=%04x seq=%04x\n", dev,
+ hdr->fc, hdr->seq );
+ free_iob ( iob );
+ return;
+}
+
+/** Indicate an error in receiving a packet
+ *
+ * @v dev 802.11 device
+ * @v iob I/O buffer with received packet, or NULL
+ * @v rc Error code
+ *
+ * This logs the error with the wrapping net_device, and frees iob if
+ * it is passed.
+ */
+void net80211_rx_err ( struct net80211_device *dev,
+ struct io_buffer *iob, int rc )
+{
+ netdev_rx_err ( dev->netdev, iob, rc );
+}
+
+/** Indicate the completed transmission of a packet
+ *
+ * @v dev 802.11 device
+ * @v iob I/O buffer of transmitted packet
+ * @v retries Number of times this packet was retransmitted
+ * @v rc Error code, or 0 for success
+ *
+ * This logs an error with the wrapping net_device if one occurred,
+ * and removes and frees the I/O buffer from its TX queue. The
+ * provided retry information is used to tune our transmission rate.
+ *
+ * If the packet did not need to be retransmitted because it was
+ * properly ACKed the first time, @a retries should be 0.
+ */
+void net80211_tx_complete ( struct net80211_device *dev,
+ struct io_buffer *iob, int retries, int rc )
+{
+ /* Update rate-control algorithm */
+ if ( dev->rctl )
+ rc80211_update_tx ( dev, retries, rc );
+
+ /* Pass completion onward */
+ netdev_tx_complete_err ( dev->netdev, iob, rc );
+}
+
+/** Common 802.11 errors */
+struct errortab common_wireless_errors[] __errortab = {
+ __einfo_errortab ( EINFO_EINVAL_CRYPTO_REQUEST ),
+ __einfo_errortab ( EINFO_ECONNRESET_UNSPECIFIED ),
+ __einfo_errortab ( EINFO_ECONNRESET_INACTIVITY ),
+ __einfo_errortab ( EINFO_ECONNRESET_4WAY_TIMEOUT ),
+ __einfo_errortab ( EINFO_ECONNRESET_8021X_FAILURE ),
+ __einfo_errortab ( EINFO_ECONNREFUSED_FAILURE ),
+ __einfo_errortab ( EINFO_ECONNREFUSED_ASSOC_DENIED ),
+ __einfo_errortab ( EINFO_ECONNREFUSED_AUTH_ALGO_UNSUPP ),
+};
Code Review / kvmfornfv.git / blobdiff