#ifndef _IPXE_PCI_H
#define _IPXE_PCI_H
-/*
- * Support for NE2000 PCI clones added David Monro June 1997
- * Generalised for other PCI NICs by Ken Yap July 1997
- * PCI support rewritten by Michael Brown 2006
+/** @file
+ *
+ * PCI bus
*
- * Most of this is taken from /usr/src/linux/include/linux/pci.h.
- */
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2, or (at
- * your option) any later version.
*/
-FILE_LICENCE ( GPL2_ONLY );
+FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
#include <stdint.h>
#include <ipxe/device.h>
#include <ipxe/tables.h>
#include <ipxe/pci_io.h>
-#include "pci_ids.h"
-/*
- * PCI constants
- *
- */
-
-#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */
-#define PCI_COMMAND_MEM 0x2 /* Enable response in mem space */
-#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */
-
-#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */
-#define PCI_LATENCY_TIMER 0x0d /* 8 bits */
-
-#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */
-#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
-#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
-#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
-#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
-#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
-#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
-#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
-
-
-#define PCI_VENDOR_ID 0x00 /* 16 bits */
-#define PCI_DEVICE_ID 0x02 /* 16 bits */
-#define PCI_COMMAND 0x04 /* 16 bits */
-
-#define PCI_STATUS 0x06 /* 16 bits */
-#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
-#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
-#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
-#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
-#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
-#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */
-#define PCI_STATUS_DEVSEL_FAST 0x000
-#define PCI_STATUS_DEVSEL_MEDIUM 0x200
-#define PCI_STATUS_DEVSEL_SLOW 0x400
-#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
-#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
-#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
-#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
-#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
-
-#define PCI_REVISION 0x08 /* 8 bits */
-#define PCI_REVISION_ID 0x08 /* 8 bits */
-#define PCI_CLASS_REVISION 0x08 /* 32 bits */
-#define PCI_CLASS_CODE 0x0b /* 8 bits */
-#define PCI_SUBCLASS_CODE 0x0a /* 8 bits */
-#define PCI_HEADER_TYPE 0x0e /* 8 bits */
-#define PCI_HEADER_TYPE_NORMAL 0
-#define PCI_HEADER_TYPE_BRIDGE 1
-#define PCI_HEADER_TYPE_CARDBUS 2
-
-
-/* Header type 0 (normal devices) */
-#define PCI_CARDBUS_CIS 0x28
+/** PCI vendor ID */
+#define PCI_VENDOR_ID 0x00
+
+/** PCI device ID */
+#define PCI_DEVICE_ID 0x02
+
+/** PCI command */
+#define PCI_COMMAND 0x04
+#define PCI_COMMAND_IO 0x0001 /**< I/O space */
+#define PCI_COMMAND_MEM 0x0002 /**< Memory space */
+#define PCI_COMMAND_MASTER 0x0004 /**< Bus master */
+#define PCI_COMMAND_INVALIDATE 0x0010 /**< Mem. write & invalidate */
+#define PCI_COMMAND_PARITY 0x0040 /**< Parity error response */
+#define PCI_COMMAND_SERR 0x0100 /**< SERR# enable */
+#define PCI_COMMAND_INTX_DISABLE 0x0400 /**< Interrupt disable */
+
+/** PCI status */
+#define PCI_STATUS 0x06
+#define PCI_STATUS_CAP_LIST 0x0010 /**< Capabilities list */
+#define PCI_STATUS_PARITY 0x0100 /**< Master data parity error */
+#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /**< Received target abort */
+#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /**< Received master abort */
+#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /**< Signalled system error */
+#define PCI_STATUS_DETECTED_PARITY 0x8000 /**< Detected parity error */
+
+/** PCI revision */
+#define PCI_REVISION 0x08
+
+/** PCI cache line size */
+#define PCI_CACHE_LINE_SIZE 0x0c
+
+/** PCI latency timer */
+#define PCI_LATENCY_TIMER 0x0d
+
+/** PCI header type */
+#define PCI_HEADER_TYPE 0x0e
+#define PCI_HEADER_TYPE_NORMAL 0x00 /**< Normal header */
+#define PCI_HEADER_TYPE_BRIDGE 0x01 /**< PCI-to-PCI bridge header */
+#define PCI_HEADER_TYPE_CARDBUS 0x02 /**< CardBus header */
+#define PCI_HEADER_TYPE_MASK 0x7f /**< Header type mask */
+#define PCI_HEADER_TYPE_MULTI 0x80 /**< Multi-function device */
+
+/** PCI base address registers */
+#define PCI_BASE_ADDRESS(n) ( 0x10 + ( 4 * (n) ) )
+#define PCI_BASE_ADDRESS_0 PCI_BASE_ADDRESS ( 0 )
+#define PCI_BASE_ADDRESS_1 PCI_BASE_ADDRESS ( 1 )
+#define PCI_BASE_ADDRESS_2 PCI_BASE_ADDRESS ( 2 )
+#define PCI_BASE_ADDRESS_3 PCI_BASE_ADDRESS ( 3 )
+#define PCI_BASE_ADDRESS_4 PCI_BASE_ADDRESS ( 4 )
+#define PCI_BASE_ADDRESS_5 PCI_BASE_ADDRESS ( 5 )
+#define PCI_BASE_ADDRESS_SPACE_IO 0x00000001UL /**< I/O BAR */
+#define PCI_BASE_ADDRESS_IO_MASK 0x00000003UL /**< I/O BAR mask */
+#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x00000004UL /**< 64-bit memory */
+#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x00000006UL /**< Memory type mask */
+#define PCI_BASE_ADDRESS_MEM_MASK 0x0000000fUL /**< Memory BAR mask */
+
+/** PCI subsystem vendor ID */
#define PCI_SUBSYSTEM_VENDOR_ID 0x2c
+
+/** PCI subsystem ID */
#define PCI_SUBSYSTEM_ID 0x2e
-#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */
-#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits */
-#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits */
-#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */
-#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */
-#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */
-
-#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */
-#define PCI_BASE_ADDRESS_SPACE_IO 0x01
-#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
-
-#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
-#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */
-#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */
-#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */
-#define PCI_BASE_ADDRESS_MEM_MASK (~0x0f)
-#define PCI_BASE_ADDRESS_IO_MASK (~0x03)
-#define PCI_ROM_ADDRESS 0x30 /* 32 bits */
-#define PCI_ROM_ADDRESS_ENABLE 0x01 /* Write 1 to enable ROM,
- bits 31..11 are address,
- 10..2 are reserved */
-
-#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
-
-#define PCI_INTERRUPT_LINE 0x3c /* IRQ number (0-15) */
-#define PCI_INTERRUPT_PIN 0x3d /* IRQ pin on PCI bus (A-D) */
-
-/* Header type 1 (PCI-to-PCI bridges) */
-#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */
-#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */
-#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */
-#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */
-#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */
-#define PCI_IO_LIMIT 0x1d
-#define PCI_IO_RANGE_TYPE_MASK 0x0f /* I/O bridging type */
-#define PCI_IO_RANGE_TYPE_16 0x00
-#define PCI_IO_RANGE_TYPE_32 0x01
-#define PCI_IO_RANGE_MASK ~0x0f
-#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */
-#define PCI_MEMORY_BASE 0x20 /* Memory range behind */
-#define PCI_MEMORY_LIMIT 0x22
-#define PCI_MEMORY_RANGE_TYPE_MASK 0x0f
-#define PCI_MEMORY_RANGE_MASK ~0x0f
-#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */
-#define PCI_PREF_MEMORY_LIMIT 0x26
-#define PCI_PREF_RANGE_TYPE_MASK 0x0f
-#define PCI_PREF_RANGE_TYPE_32 0x00
-#define PCI_PREF_RANGE_TYPE_64 0x01
-#define PCI_PREF_RANGE_MASK ~0x0f
-#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */
-#define PCI_PREF_LIMIT_UPPER32 0x2c
-#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */
-#define PCI_IO_LIMIT_UPPER16 0x32
-/* 0x34 same as for htype 0 */
-/* 0x35-0x3b is reserved */
-#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */
-/* 0x3c-0x3d are same as for htype 0 */
-#define PCI_BRIDGE_CONTROL 0x3e
-#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */
-#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */
-#define PCI_BRIDGE_CTL_NO_ISA 0x04 /* Disable bridging of ISA ports */
-#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */
-#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */
-#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */
-#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */
+/** PCI expansion ROM base address */
+#define PCI_ROM_ADDRESS 0x30
+/** PCI capabilities pointer */
+#define PCI_CAPABILITY_LIST 0x34
+
+/** CardBus capabilities pointer */
#define PCI_CB_CAPABILITY_LIST 0x14
-/* Capability lists */
-
-#define PCI_CAP_LIST_ID 0 /* Capability ID */
-#define PCI_CAP_ID_PM 0x01 /* Power Management */
-#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */
-#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */
-#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */
-#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
-#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
-#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */
-#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
-#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
-#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
-#define PCI_CAP_SIZEOF 4
-
-/* Power Management Registers */
-
-#define PCI_PM_PMC 2 /* PM Capabilities Register */
-#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */
-#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */
-#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */
-#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */
-#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxiliary power support mask */
-#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */
-#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */
-#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */
-#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */
-#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */
-#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */
-#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */
-#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */
-#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */
-#define PCI_PM_CTRL 4 /* PM control and status register */
-#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */
-#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */
-#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */
-#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */
-#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */
-#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */
-#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */
-#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */
-#define PCI_PM_DATA_REGISTER 7 /* (??) */
-#define PCI_PM_SIZEOF 8
-
-/* AGP registers */
-
-#define PCI_AGP_VERSION 2 /* BCD version number */
-#define PCI_AGP_RFU 3 /* Rest of capability flags */
-#define PCI_AGP_STATUS 4 /* Status register */
-#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */
-#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */
-#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */
-#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */
-#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */
-#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */
-#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */
-#define PCI_AGP_COMMAND 8 /* Control register */
-#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
-#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
-#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
-#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
-#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
-#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
-#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */
-#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */
-#define PCI_AGP_SIZEOF 12
-
-/* Slot Identification */
-
-#define PCI_SID_ESR 2 /* Expansion Slot Register */
-#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */
-#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */
-#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */
-
-/* Message Signalled Interrupts registers */
-
-#define PCI_MSI_FLAGS 2 /* Various flags */
-#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */
-#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */
-#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */
-#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */
-#define PCI_MSI_RFU 3 /* Rest of capability flags */
-#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
-#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
-#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
-#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
-
-/* Advanced Error Reporting */
-
-#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */
-#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */
-#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */
-#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */
-#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */
-#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */
-#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */
-#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */
-#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */
-#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */
-#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */
-#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */
-#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */
- /* Same bits as above */
-#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */
- /* Same bits as above */
-#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */
-#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */
-#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */
-#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */
-#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */
-#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */
-#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */
- /* Same bits as above */
+/** PCI interrupt line */
+#define PCI_INTERRUPT_LINE 0x3c
+
+/** Capability ID */
+#define PCI_CAP_ID 0x00
+#define PCI_CAP_ID_PM 0x01 /**< Power management */
+#define PCI_CAP_ID_VPD 0x03 /**< Vital product data */
+#define PCI_CAP_ID_VNDR 0x09 /**< Vendor-specific */
+#define PCI_CAP_ID_EXP 0x10 /**< PCI Express */
+
+/** Next capability */
+#define PCI_CAP_NEXT 0x01
+
+/** Power management control and status */
+#define PCI_PM_CTRL 0x04
+#define PCI_PM_CTRL_STATE_MASK 0x0003 /**< Current power state */
+#define PCI_PM_CTRL_PME_ENABLE 0x0100 /**< PME pin enable */
+#define PCI_PM_CTRL_PME_STATUS 0x8000 /**< PME pin status */
+
+/** Uncorrectable error status */
+#define PCI_ERR_UNCOR_STATUS 0x04
+
+/** Network controller */
+#define PCI_CLASS_NETWORK 0x02
+
+/** Serial bus controller */
+#define PCI_CLASS_SERIAL 0x0c
+#define PCI_CLASS_SERIAL_USB 0x03 /**< USB controller */
+#define PCI_CLASS_SERIAL_USB_UHCI 0x00 /**< UHCI USB controller */
+#define PCI_CLASS_SERIAL_USB_OHCI 0x10 /**< OHCI USB controller */
+#define PCI_CLASS_SERIAL_USB_EHCI 0x20 /**< ECHI USB controller */
+#define PCI_CLASS_SERIAL_USB_XHCI 0x30 /**< xHCI USB controller */
+
+/** Construct PCI class
+ *
+ * @v base Base class (or PCI_ANY_ID)
+ * @v sub Subclass (or PCI_ANY_ID)
+ * @v progif Programming interface (or PCI_ANY_ID)
+ */
+#define PCI_CLASS( base, sub, progif ) \
+ ( ( ( (base) & 0xff ) << 16 ) | ( ( (sub) & 0xff ) << 8 ) | \
+ ( ( (progif) & 0xff) << 0 ) )
/** A PCI device ID list entry */
struct pci_device_id {
/** Match-anything ID */
#define PCI_ANY_ID 0xffff
+/** A PCI class ID */
+struct pci_class_id {
+ /** Class */
+ uint32_t class;
+ /** Class mask */
+ uint32_t mask;
+};
+
+/** Construct PCI class ID
+ *
+ * @v base Base class (or PCI_ANY_ID)
+ * @v sub Subclass (or PCI_ANY_ID)
+ * @v progif Programming interface (or PCI_ANY_ID)
+ */
+#define PCI_CLASS_ID( base, sub, progif ) { \
+ .class = PCI_CLASS ( base, sub, progif ), \
+ .mask = ( ( ( ( (base) == PCI_ANY_ID ) ? 0x00 : 0xff ) << 16 ) | \
+ ( ( ( (sub) == PCI_ANY_ID ) ? 0x00 : 0xff ) << 8 ) | \
+ ( ( ( (progif) == PCI_ANY_ID ) ? 0x00 : 0xff ) << 0 ) ), \
+ }
+
/** A PCI device */
struct pci_device {
/** Generic device */
struct pci_device_id *ids;
/** Number of entries in PCI ID table */
unsigned int id_count;
+ /** PCI class ID */
+ struct pci_class_id class;
/**
* Probe device
*
#define PCI_BUSDEVFN( bus, slot, func ) \
( ( (bus) << 8 ) | ( (slot) << 3 ) | ( (func) << 0 ) )
#define PCI_FIRST_FUNC( busdevfn ) ( (busdevfn) & ~0x07 )
+#define PCI_LAST_FUNC( busdevfn ) ( (busdevfn) | 0x07 )
#define PCI_BASE_CLASS( class ) ( (class) >> 16 )
#define PCI_SUB_CLASS( class ) ( ( (class) >> 8 ) & 0xff )
Code Review / kvmfornfv.git / blobdiff