Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / ipxe / src / drivers / net / 3c5x9.c
diff --git a/qemu/roms/ipxe/src/drivers/net/3c5x9.c b/qemu/roms/ipxe/src/drivers/net/3c5x9.c
new file mode 100644 (file)
index 0000000..4d9bc8d
--- /dev/null
@@ -0,0 +1,416 @@
+/**************************************************************************
+ETHERBOOT -  BOOTP/TFTP Bootstrap Program
+
+Author: Martin Renters.
+  Date: Mar 22 1995
+
+ This code is based heavily on David Greenman's if_ed.c driver and
+  Andres Vega Garcia's if_ep.c driver.
+
+ Copyright (C) 1993-1994, David Greenman, Martin Renters.
+ Copyright (C) 1993-1995, Andres Vega Garcia.
+ Copyright (C) 1995, Serge Babkin.
+  This software may be used, modified, copied, distributed, and sold, in
+  both source and binary form provided that the above copyright and these
+  terms are retained. Under no circumstances are the authors responsible for
+  the proper functioning of this software, nor do the authors assume any
+  responsibility for damages incurred with its use.
+
+3c509 support added by Serge Babkin (babkin@hq.icb.chel.su)
+
+$Id$
+
+***************************************************************************/
+
+FILE_LICENCE ( BSD2 );
+
+/* #define EDEBUG */
+
+#include <ipxe/ethernet.h>
+#include "etherboot.h"
+#include "nic.h"
+#include <ipxe/isa.h>
+#include "3c509.h"
+
+static enum { none, bnc, utp } connector = none;       /* for 3C509 */
+
+/**************************************************************************
+ETH_RESET - Reset adapter
+***************************************************************************/
+void t5x9_disable ( struct nic *nic ) {
+       /* stop card */
+       outw(RX_DISABLE, nic->ioaddr + EP_COMMAND);
+       outw(RX_DISCARD_TOP_PACK, nic->ioaddr + EP_COMMAND);
+       while (inw(nic->ioaddr + EP_STATUS) & S_COMMAND_IN_PROGRESS)
+               ;
+       outw(TX_DISABLE, nic->ioaddr + EP_COMMAND);
+       outw(STOP_TRANSCEIVER, nic->ioaddr + EP_COMMAND);
+       udelay(1000);
+       outw(RX_RESET, nic->ioaddr + EP_COMMAND);
+       outw(TX_RESET, nic->ioaddr + EP_COMMAND);
+       outw(C_INTR_LATCH, nic->ioaddr + EP_COMMAND);
+       outw(SET_RD_0_MASK, nic->ioaddr + EP_COMMAND);
+       outw(SET_INTR_MASK, nic->ioaddr + EP_COMMAND);
+       outw(SET_RX_FILTER, nic->ioaddr + EP_COMMAND);
+
+       /*
+        * wait for reset to complete
+        */
+       while (inw(nic->ioaddr + EP_STATUS) & S_COMMAND_IN_PROGRESS)
+               ;
+
+       GO_WINDOW(nic->ioaddr,0);
+
+       /* Disable the card */
+       outw(0, nic->ioaddr + EP_W0_CONFIG_CTRL);
+
+       /* Configure IRQ to none */
+       outw(SET_IRQ(0), nic->ioaddr + EP_W0_RESOURCE_CFG);
+}
+
+static void t509_enable ( struct nic *nic ) {
+       int i;
+
+       /* Enable the card */
+       GO_WINDOW(nic->ioaddr,0);
+       outw(ENABLE_DRQ_IRQ, nic->ioaddr + EP_W0_CONFIG_CTRL);
+
+       GO_WINDOW(nic->ioaddr,2);
+
+       /* Reload the ether_addr. */
+       for (i = 0; i < ETH_ALEN; i++)
+               outb(nic->node_addr[i], nic->ioaddr + EP_W2_ADDR_0 + i);
+
+       outw(RX_RESET, nic->ioaddr + EP_COMMAND);
+       outw(TX_RESET, nic->ioaddr + EP_COMMAND);
+
+       /* Window 1 is operating window */
+       GO_WINDOW(nic->ioaddr,1);
+       for (i = 0; i < 31; i++)
+               inb(nic->ioaddr + EP_W1_TX_STATUS);
+
+       /* get rid of stray intr's */
+       outw(ACK_INTR | 0xff, nic->ioaddr + EP_COMMAND);
+
+       outw(SET_RD_0_MASK | S_5_INTS, nic->ioaddr + EP_COMMAND);
+
+       outw(SET_INTR_MASK, nic->ioaddr + EP_COMMAND);
+
+       outw(SET_RX_FILTER | FIL_GROUP | FIL_INDIVIDUAL | FIL_BRDCST,
+            nic->ioaddr + EP_COMMAND);
+
+       /* configure BNC */
+       if (connector == bnc) {
+               outw(START_TRANSCEIVER, nic->ioaddr + EP_COMMAND);
+               udelay(1000);
+       }
+       /* configure UTP */
+       else if (connector == utp) {
+               GO_WINDOW(nic->ioaddr,4);
+               outw(ENABLE_UTP, nic->ioaddr + EP_W4_MEDIA_TYPE);
+               sleep(2);       /* Give time for media to negotiate */
+               GO_WINDOW(nic->ioaddr,1);
+       }
+
+       /* start transceiver and receiver */
+       outw(RX_ENABLE, nic->ioaddr + EP_COMMAND);
+       outw(TX_ENABLE, nic->ioaddr + EP_COMMAND);
+
+       /* set early threshold for minimal packet length */
+       outw(SET_RX_EARLY_THRESH | ETH_ZLEN, nic->ioaddr + EP_COMMAND);
+       outw(SET_TX_START_THRESH | 16, nic->ioaddr + EP_COMMAND);
+}
+
+static void t509_reset ( struct nic *nic ) {
+       t5x9_disable ( nic );
+       t509_enable ( nic );
+}    
+
+/**************************************************************************
+ETH_TRANSMIT - Transmit a frame
+***************************************************************************/
+static char padmap[] = {
+       0, 3, 2, 1};
+
+static void t509_transmit(
+struct nic *nic,
+const char *d,                 /* Destination */
+unsigned int t,                        /* Type */
+unsigned int s,                        /* size */
+const char *p)                 /* Packet */
+{
+       register unsigned int len;
+       int pad;
+       int status;
+
+#ifdef EDEBUG
+       printf("{l=%d,t=%hX}",s+ETH_HLEN,t);
+#endif
+
+       /* swap bytes of type */
+       t= htons(t);
+
+       len=s+ETH_HLEN; /* actual length of packet */
+       pad = padmap[len & 3];
+
+       /*
+       * The 3c509 automatically pads short packets to minimum ethernet length,
+       * but we drop packets that are too large. Perhaps we should truncate
+       * them instead?
+       */
+       if (len + pad > ETH_FRAME_LEN) {
+               return;
+       }
+
+       /* drop acknowledgements */
+       while ((status=inb(nic->ioaddr + EP_W1_TX_STATUS)) & TXS_COMPLETE ) {
+               if (status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) {
+                       outw(TX_RESET, nic->ioaddr + EP_COMMAND);
+                       outw(TX_ENABLE, nic->ioaddr + EP_COMMAND);
+               }
+               outb(0x0, nic->ioaddr + EP_W1_TX_STATUS);
+       }
+
+       while (inw(nic->ioaddr + EP_W1_FREE_TX) < (unsigned short)len + pad + 4)
+               ; /* no room in FIFO */
+
+       outw(len, nic->ioaddr + EP_W1_TX_PIO_WR_1);
+       outw(0x0, nic->ioaddr + EP_W1_TX_PIO_WR_1);     /* Second dword meaningless */
+
+       /* write packet */
+       outsw(nic->ioaddr + EP_W1_TX_PIO_WR_1, d, ETH_ALEN/2);
+       outsw(nic->ioaddr + EP_W1_TX_PIO_WR_1, nic->node_addr, ETH_ALEN/2);
+       outw(t, nic->ioaddr + EP_W1_TX_PIO_WR_1);
+       outsw(nic->ioaddr + EP_W1_TX_PIO_WR_1, p, s / 2);
+       if (s & 1)
+               outb(*(p+s - 1), nic->ioaddr + EP_W1_TX_PIO_WR_1);
+
+       while (pad--)
+               outb(0, nic->ioaddr + EP_W1_TX_PIO_WR_1);       /* Padding */
+
+       /* wait for Tx complete */
+       while((inw(nic->ioaddr + EP_STATUS) & S_COMMAND_IN_PROGRESS) != 0)
+               ;
+}
+
+/**************************************************************************
+ETH_POLL - Wait for a frame
+***************************************************************************/
+static int t509_poll(struct nic *nic, int retrieve)
+{
+       /* common variables */
+       /* variables for 3C509 */
+       short status, cst;
+       register short rx_fifo;
+
+       cst=inw(nic->ioaddr + EP_STATUS);
+
+#ifdef EDEBUG
+       if(cst & 0x1FFF)
+               printf("-%hX-",cst);
+#endif
+
+       if( (cst & S_RX_COMPLETE)==0 ) {
+               /* acknowledge  everything */
+               outw(ACK_INTR| (cst & S_5_INTS), nic->ioaddr + EP_COMMAND);
+               outw(C_INTR_LATCH, nic->ioaddr + EP_COMMAND);
+
+               return 0;
+       }
+
+       status = inw(nic->ioaddr + EP_W1_RX_STATUS);
+#ifdef EDEBUG
+       printf("*%hX*",status);
+#endif
+
+       if (status & ERR_RX) {
+               outw(RX_DISCARD_TOP_PACK, nic->ioaddr + EP_COMMAND);
+               return 0;
+       }
+
+       rx_fifo = status & RX_BYTES_MASK;
+       if (rx_fifo==0)
+               return 0;
+
+       if ( ! retrieve ) return 1;
+
+               /* read packet */
+#ifdef EDEBUG
+       printf("[l=%d",rx_fifo);
+#endif
+       insw(nic->ioaddr + EP_W1_RX_PIO_RD_1, nic->packet, rx_fifo / 2);
+       if(rx_fifo & 1)
+               nic->packet[rx_fifo-1]=inb(nic->ioaddr + EP_W1_RX_PIO_RD_1);
+       nic->packetlen=rx_fifo;
+
+       while(1) {
+               status = inw(nic->ioaddr + EP_W1_RX_STATUS);
+#ifdef EDEBUG
+               printf("*%hX*",status);
+#endif
+               rx_fifo = status & RX_BYTES_MASK;
+               if(rx_fifo>0) {
+                       insw(nic->ioaddr + EP_W1_RX_PIO_RD_1, nic->packet+nic->packetlen, rx_fifo / 2);
+                       if(rx_fifo & 1)
+                               nic->packet[nic->packetlen+rx_fifo-1]=inb(nic->ioaddr + EP_W1_RX_PIO_RD_1);
+                       nic->packetlen+=rx_fifo;
+#ifdef EDEBUG
+                       printf("+%d",rx_fifo);
+#endif
+               }
+               if(( status & RX_INCOMPLETE )==0) {
+#ifdef EDEBUG
+                       printf("=%d",nic->packetlen);
+#endif
+                       break;
+               }
+               udelay(1000);   /* if incomplete wait 1 ms */
+       }
+       /* acknowledge reception of packet */
+       outw(RX_DISCARD_TOP_PACK, nic->ioaddr + EP_COMMAND);
+       while (inw(nic->ioaddr + EP_STATUS) & S_COMMAND_IN_PROGRESS)
+               ;
+#ifdef EDEBUG
+{
+       unsigned short type = 0;        /* used by EDEBUG */
+       type = (nic->packet[12]<<8) | nic->packet[13];
+       if(nic->packet[0]+nic->packet[1]+nic->packet[2]+nic->packet[3]+nic->packet[4]+
+           nic->packet[5] == 0xFF*ETH_ALEN)
+               printf(",t=%hX,b]",type);
+       else
+               printf(",t=%hX]",type);
+}
+#endif
+       return (1);
+}
+
+/**************************************************************************
+ETH_IRQ - interrupt handling
+***************************************************************************/
+static void t509_irq(struct nic *nic __unused, irq_action_t action __unused)
+{
+  switch ( action ) {
+  case DISABLE :
+    break;
+  case ENABLE :
+    break;
+  case FORCE :
+    break;
+  }
+}
+
+/*************************************************************************
+       3Com 509 - specific routines
+**************************************************************************/
+
+static int eeprom_rdy ( uint16_t ioaddr ) {
+       int i;
+
+       for (i = 0; is_eeprom_busy(ioaddr) && i < MAX_EEPROMBUSY; i++);
+       if (i >= MAX_EEPROMBUSY) {
+               /* printf("3c509: eeprom failed to come ready.\n"); */
+               /* memory in EPROM is tight */
+               /* printf("3c509: eeprom busy.\n"); */
+               return (0);
+       }
+       return (1);
+}
+
+/*
+ * get_e: gets a 16 bits word from the EEPROM.
+ */
+static int get_e ( uint16_t ioaddr, int offset ) {
+       GO_WINDOW(ioaddr,0);
+       if (!eeprom_rdy(ioaddr))
+               return (0xffff);
+       outw(EEPROM_CMD_RD | offset, ioaddr + EP_W0_EEPROM_COMMAND);
+       if (!eeprom_rdy(ioaddr))
+               return (0xffff);
+       return (inw(ioaddr + EP_W0_EEPROM_DATA));
+}
+
+static struct nic_operations t509_operations = {
+       .connect        = dummy_connect,
+       .poll           = t509_poll,
+       .transmit       = t509_transmit,
+       .irq            = t509_irq,
+};
+
+/**************************************************************************
+ETH_PROBE - Look for an adapter
+***************************************************************************/
+int t5x9_probe ( struct nic *nic,
+                uint16_t prod_id_check, uint16_t prod_id_mask ) {
+       uint16_t prod_id;
+       int i,j;
+       unsigned short *p;
+       
+       /* Check product ID */
+       prod_id = get_e ( nic->ioaddr, EEPROM_PROD_ID );
+       if ( ( prod_id & prod_id_mask ) != prod_id_check ) {
+               printf ( "EEPROM Product ID is incorrect (%hx & %hx != %hx)\n",
+                        prod_id, prod_id_mask, prod_id_check );
+               return 0;
+       }
+
+       /* test for presence of connectors */
+       GO_WINDOW(nic->ioaddr,0);
+       i = inw(nic->ioaddr + EP_W0_CONFIG_CTRL);
+       j = (inw(nic->ioaddr + EP_W0_ADDRESS_CFG) >> 14) & 0x3;
+
+       switch(j) {
+       case 0:
+               if (i & IS_UTP) {
+                       printf("10baseT\n");
+                       connector = utp;
+               } else {
+                       printf("10baseT not present\n");
+                       return 0;
+               }
+               break;
+       case 1:
+               if (i & IS_AUI) {
+                       printf("10base5\n");
+               } else {
+                       printf("10base5 not present\n");
+                       return 0;
+               }
+               break;
+       case 3:
+               if (i & IS_BNC) {
+                       printf("10base2\n");
+                       connector = bnc;
+               } else {
+                       printf("10base2 not present\n");
+                       return 0;
+               }
+               break;
+       default:
+               printf("unknown connector\n");
+               return 0;
+       }
+
+       /*
+       * Read the station address from the eeprom
+       */
+       p = (unsigned short *) nic->node_addr;
+       for (i = 0; i < ETH_ALEN / 2; i++) {
+               p[i] = htons(get_e(nic->ioaddr,i));
+               GO_WINDOW(nic->ioaddr,2);
+               outw(ntohs(p[i]), nic->ioaddr + EP_W2_ADDR_0 + (i * 2));
+       }
+
+       DBG ( "Ethernet Address: %s\n", eth_ntoa ( nic->node_addr ) );
+
+       t509_reset(nic);
+
+       nic->nic_op = &t509_operations;
+       return 1;
+
+}
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ * End:
+ */