Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / ipxe / src / arch / i386 / include / pxe_types.h

diff --git a/qemu/roms/ipxe/src/arch/i386/include/pxe_types.h b/qemu/roms/ipxe/src/arch/i386/include/pxe_types.h
new file mode 100644 (file)
index 0000000..db82145
--- /dev/null
+++ b/qemu/roms/ipxe/src/arch/i386/include/pxe_types.h
@@ -0,0 +1,127 @@
+#ifndef PXE_TYPES_H
+#define PXE_TYPES_H
+
+/** @file
+ *
+ * PXE data types
+ *
+ */
+
+FILE_LICENCE ( GPL2_OR_LATER );
+
+#include <stdint.h>
+#include <errno.h> /* PXE status codes */
+
+/** @addtogroup pxe Preboot eXecution Environment (PXE) API
+ *  @{
+ */
+
+/** @defgroup pxe_types PXE data types
+ *
+ * Basic PXE data types such as #UINT16_t, #ADDR32_t, #SEGSEL_t etc.
+ *
+ * These definitions are based on Table 1-1 ("Data Type Definitions")
+ * in the Intel PXE specification version 2.1.  They have been
+ * generalised to non-x86 architectures where possible.
+ *
+ * @{
+ */
+
+/** An 8-bit unsigned integer */
+typedef uint8_t UINT8_t;
+
+/** A 16-bit unsigned integer */
+typedef uint16_t UINT16_t;
+
+/** A 32-bit unsigned integer */
+typedef uint32_t UINT32_t;
+
+/** A PXE exit code.
+ *
+ * Permitted values are #PXENV_EXIT_SUCCESS and #PXENV_EXIT_FAILURE.
+ *
+ */
+typedef UINT16_t PXENV_EXIT_t;
+#define PXENV_EXIT_SUCCESS     0x0000  /**< No error occurred */
+#define PXENV_EXIT_FAILURE     0x0001  /**< An error occurred */
+
+/** A PXE status code.
+ *
+ * Status codes are defined in errno.h.
+ *
+ */
+typedef UINT16_t PXENV_STATUS_t;
+
+/** An IPv4 address.
+ *
+ * @note This data type is in network (big-endian) byte order.
+ *
+ */
+typedef UINT32_t IP4_t;
+
+/** A UDP port.
+ *
+ * @note This data type is in network (big-endian) byte order.
+ *
+ */
+typedef UINT16_t UDP_PORT_t;
+
+/** Maximum length of a MAC address */
+#define MAC_ADDR_LEN 16
+
+/** A MAC address */
+typedef UINT8_t MAC_ADDR_t[MAC_ADDR_LEN];
+
+#ifndef HAVE_ARCH_ADDR32
+/** A physical address.
+ *
+ * For x86, this is a 32-bit physical address, and is therefore
+ * limited to the low 4GB.
+ *
+ */
+typedef UINT32_t ADDR32_t;
+#endif
+
+#ifndef HAVE_ARCH_SEGSEL
+/** A segment selector.
+ *
+ * For x86, this is a real mode segment (0x0000-0xffff), or a
+ * protected-mode segment selector, such as could be loaded into a
+ * segment register.
+ *
+ */
+typedef UINT16_t SEGSEL_t;
+#endif
+
+#ifndef HAVE_ARCH_OFF16
+/** An offset within a segment identified by #SEGSEL
+ *
+ * For x86, this is a 16-bit offset.
+ *
+ */
+typedef UINT16_t OFF16_t;
+#endif
+
+/** A segment:offset address
+ *
+ * For x86, this is a 16-bit real-mode or protected-mode
+ * segment:offset address.
+ *
+ */
+typedef struct s_SEGOFF16 {
+       OFF16_t         offset;         /**< Offset within the segment */
+       SEGSEL_t        segment;        /**< Segment selector */
+} __attribute__ (( packed )) SEGOFF16_t;
+
+/** A segment descriptor */
+typedef struct s_SEGDESC {
+       SEGSEL_t        segment_address;        /**< Segment selector */
+       ADDR32_t        Physical_address;       /**< Segment base address */
+       OFF16_t         Seg_size;               /**< Size of the segment */
+} __attribute__ (( packed )) SEGDESC_t;
+
+/** @} */ /* pxe_types */
+
+/** @} */ /* pxe */
+
+#endif /* PXE_TYPES_H */