# QAPI common definitions
{ 'include': 'qapi/common.json' }
+# QAPI crypto definitions
+{ 'include': 'qapi/crypto.json' }
+
# QAPI block definitions
{ 'include': 'qapi/block.json' }
# Tracing commands
{ 'include': 'qapi/trace.json' }
+# QAPI introspection
+{ 'include': 'qapi/introspect.json' }
+
##
# @LostTickPolicy:
#
# @format: #optional data encoding (default 'utf8').
# - base64: data must be base64 encoded text. Its binary
# decoding gets written.
-# Bug: invalid base64 is currently not rejected.
-# Whitespace *is* invalid.
# - utf8: data's UTF-8 encoding is written
# - data itself is always Unicode regardless of format, like
# any other string.
#
# @active: in the process of doing migration.
#
+# @postcopy-active: like active, but now in postcopy mode. (since 2.5)
+#
# @completed: migration is finished.
#
# @failed: some error occurred during migration process.
##
{ 'enum': 'MigrationStatus',
'data': [ 'none', 'setup', 'cancelling', 'cancelled',
- 'active', 'completed', 'failed' ] }
+ 'active', 'postcopy-active', 'completed', 'failed' ] }
##
# @MigrationInfo
# may be expensive, but do not actually occur during the iterative
# migration rounds themselves. (since 1.6)
#
+# @x-cpu-throttle-percentage: #optional percentage of time guest cpus are being
+# throttled during auto-converge. This is only present when auto-converge
+# has started throttling guest cpus. (Since 2.5)
+#
# Since: 0.14.0
##
{ 'struct': 'MigrationInfo',
'*total-time': 'int',
'*expected-downtime': 'int',
'*downtime': 'int',
- '*setup-time': 'int'} }
+ '*setup-time': 'int',
+ '*x-cpu-throttle-percentage': 'int'} }
##
# @query-migrate
# @auto-converge: If enabled, QEMU will automatically throttle down the guest
# to speed up convergence of RAM migration. (since 1.6)
#
+# @postcopy-ram: Start executing on the migration target before all of RAM has
+# been migrated, pulling the remaining pages along as needed. NOTE: If
+# the migration fails during postcopy the VM will fail. (since 2.6)
+#
# Since: 1.2
##
{ 'enum': 'MigrationCapability',
'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
- 'compress', 'events'] }
+ 'compress', 'events', 'postcopy-ram'] }
##
# @MigrationCapabilityStatus
# compression, so set the decompress-threads to the number about 1/4
# of compress-threads is adequate.
#
+# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.5)
+#
+# @x-cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.5)
# Since: 2.4
##
{ 'enum': 'MigrationParameter',
- 'data': ['compress-level', 'compress-threads', 'decompress-threads'] }
+ 'data': ['compress-level', 'compress-threads', 'decompress-threads',
+ 'x-cpu-throttle-initial', 'x-cpu-throttle-increment'] }
#
# @migrate-set-parameters
#
# @decompress-threads: decompression thread count
#
+# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.5)
+#
+# @x-cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.5)
# Since: 2.4
##
{ 'command': 'migrate-set-parameters',
'data': { '*compress-level': 'int',
'*compress-threads': 'int',
- '*decompress-threads': 'int'} }
+ '*decompress-threads': 'int',
+ '*x-cpu-throttle-initial': 'int',
+ '*x-cpu-throttle-increment': 'int'} }
#
# @MigrationParameters
#
# @decompress-threads: decompression thread count
#
+# @x-cpu-throttle-initial: Initial percentage of time guest cpus are throttled
+# when migration auto-converge is activated. The
+# default value is 20. (Since 2.5)
+#
+# @x-cpu-throttle-increment: throttle percentage increase each time
+# auto-converge detects that migration is not making
+# progress. The default value is 10. (Since 2.5)
+#
# Since: 2.4
##
{ 'struct': 'MigrationParameters',
'data': { 'compress-level': 'int',
'compress-threads': 'int',
- 'decompress-threads': 'int'} }
+ 'decompress-threads': 'int',
+ 'x-cpu-throttle-initial': 'int',
+ 'x-cpu-throttle-increment': 'int'} }
##
# @query-migrate-parameters
#
'data': { 'protocol': 'str', 'hostname': 'str', '*port': 'int',
'*tls-port': 'int', '*cert-subject': 'str' } }
+##
+# @migrate-start-postcopy
+#
+# Followup to a migration command to switch the migration to postcopy mode.
+# The postcopy-ram capability must be set before the original migration
+# command.
+#
+# Since: 2.5
+{ 'command': 'migrate-start-postcopy' }
+
##
# @MouseInfo:
#
##
{ 'command': 'query-mice', 'returns': ['MouseInfo'] }
+##
+# @CpuInfoArch:
+#
+# An enumeration of cpu types that enable additional information during
+# @query-cpus.
+#
+# Since: 2.6
+##
+{ 'enum': 'CpuInfoArch',
+ 'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 'other' ] }
+
##
# @CpuInfo:
#
#
# @CPU: the index of the virtual CPU
#
-# @current: this only exists for backwards compatible and should be ignored
+# @current: this only exists for backwards compatibility and should be ignored
#
# @halted: true if the virtual CPU is in the halt state. Halt usually refers
# to a processor specific low power mode.
#
# @qom_path: path to the CPU object in the QOM tree (since 2.4)
#
-# @pc: #optional If the target is i386 or x86_64, this is the 64-bit instruction
-# pointer.
-# If the target is Sparc, this is the PC component of the
-# instruction pointer.
-#
-# @nip: #optional If the target is PPC, the instruction pointer
-#
-# @npc: #optional If the target is Sparc, the NPC component of the instruction
-# pointer
-#
-# @PC: #optional If the target is MIPS, the instruction pointer
-#
# @thread_id: ID of the underlying host thread
#
+# @arch: architecture of the cpu, which determines which additional fields
+# will be listed (since 2.6)
+#
# Since: 0.14.0
#
# Notes: @halted is a transient state that changes frequently. By the time the
# data is sent to the client, the guest may no longer be halted.
##
-{ 'struct': 'CpuInfo',
- 'data': {'CPU': 'int', 'current': 'bool', 'halted': 'bool',
- 'qom_path': 'str',
- '*pc': 'int', '*nip': 'int', '*npc': 'int', '*PC': 'int',
- 'thread_id': 'int'} }
+{ 'union': 'CpuInfo',
+ 'base': {'CPU': 'int', 'current': 'bool', 'halted': 'bool',
+ 'qom_path': 'str', 'thread_id': 'int', 'arch': 'CpuInfoArch' },
+ 'discriminator': 'arch',
+ 'data': { 'x86': 'CpuInfoX86',
+ 'sparc': 'CpuInfoSPARC',
+ 'ppc': 'CpuInfoPPC',
+ 'mips': 'CpuInfoMIPS',
+ 'tricore': 'CpuInfoTricore',
+ 'other': 'CpuInfoOther' } }
+
+##
+# @CpuInfoX86:
+#
+# Additional information about a virtual i386 or x86_64 CPU
+#
+# @pc: the 64-bit instruction pointer
+#
+# Since 2.6
+##
+{ 'struct': 'CpuInfoX86', 'data': { 'pc': 'int' } }
+
+##
+# @CpuInfoSPARC:
+#
+# Additional information about a virtual SPARC CPU
+#
+# @pc: the PC component of the instruction pointer
+#
+# @npc: the NPC component of the instruction pointer
+#
+# Since 2.6
+##
+{ 'struct': 'CpuInfoSPARC', 'data': { 'pc': 'int', 'npc': 'int' } }
+
+##
+# @CpuInfoPPC:
+#
+# Additional information about a virtual PPC CPU
+#
+# @nip: the instruction pointer
+#
+# Since 2.6
+##
+{ 'struct': 'CpuInfoPPC', 'data': { 'nip': 'int' } }
+
+##
+# @CpuInfoMIPS:
+#
+# Additional information about a virtual MIPS CPU
+#
+# @PC: the instruction pointer
+#
+# Since 2.6
+##
+{ 'struct': 'CpuInfoMIPS', 'data': { 'PC': 'int' } }
+
+##
+# @CpuInfoTricore:
+#
+# Additional information about a virtual Tricore CPU
+#
+# @PC: the instruction pointer
+#
+# Since 2.6
+##
+{ 'struct': 'CpuInfoTricore', 'data': { 'PC': 'int' } }
+
+##
+# @CpuInfoOther:
+#
+# No additional information is available about the virtual CPU
+#
+# Since 2.6
+#
+##
+{ 'struct': 'CpuInfoOther', 'data': { } }
##
# @query-cpus:
{ 'struct': 'Abort',
'data': { } }
+##
+# @ActionCompletionMode
+#
+# An enumeration of Transactional completion modes.
+#
+# @individual: Do not attempt to cancel any other Actions if any Actions fail
+# after the Transaction request succeeds. All Actions that
+# can complete successfully will do so without waiting on others.
+# This is the default.
+#
+# @grouped: If any Action fails after the Transaction succeeds, cancel all
+# Actions. Actions do not complete until all Actions are ready to
+# complete. May be rejected by Actions that do not support this
+# completion mode.
+#
+# Since: 2.5
+##
+{ 'enum': 'ActionCompletionMode',
+ 'data': [ 'individual', 'grouped' ] }
+
##
# @TransactionAction
#
# abort since 1.6
# blockdev-snapshot-internal-sync since 1.7
# blockdev-backup since 2.3
+# blockdev-snapshot since 2.5
+# block-dirty-bitmap-add since 2.5
+# block-dirty-bitmap-clear since 2.5
##
{ 'union': 'TransactionAction',
'data': {
- 'blockdev-snapshot-sync': 'BlockdevSnapshot',
+ 'blockdev-snapshot': 'BlockdevSnapshot',
+ 'blockdev-snapshot-sync': 'BlockdevSnapshotSync',
'drive-backup': 'DriveBackup',
'blockdev-backup': 'BlockdevBackup',
'abort': 'Abort',
- 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal'
+ 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal',
+ 'block-dirty-bitmap-add': 'BlockDirtyBitmapAdd',
+ 'block-dirty-bitmap-clear': 'BlockDirtyBitmap'
} }
+##
+# @TransactionProperties
+#
+# Optional arguments to modify the behavior of a Transaction.
+#
+# @completion-mode: #optional Controls how jobs launched asynchronously by
+# Actions will complete or fail as a group.
+# See @ActionCompletionMode for details.
+#
+# Since: 2.5
+##
+{ 'struct': 'TransactionProperties',
+ 'data': {
+ '*completion-mode': 'ActionCompletionMode'
+ }
+}
+
##
# @transaction
#
# operation fails, then the entire set of actions will be abandoned and the
# appropriate error returned.
#
-# List of:
-# @TransactionAction: information needed for the respective operation
+# @actions: List of @TransactionAction;
+# information needed for the respective operations.
+#
+# @properties: #optional structure of additional options to control the
+# execution of the transaction. See @TransactionProperties
+# for additional detail.
#
# Returns: nothing on success
# Errors depend on the operations of the transaction
# Since 1.1
##
{ 'command': 'transaction',
- 'data': { 'actions': [ 'TransactionAction' ] } }
+ 'data': { 'actions': [ 'TransactionAction' ],
+ '*properties': 'TransactionProperties'
+ }
+}
##
# @human-monitor-command:
# 1) A primitive type such as 'u8', 'u16', 'bool', 'str', or 'double'.
# These types are mapped to the appropriate JSON type.
#
-# 2) A legacy type in the form 'legacy<subtype>' where subtype is the
-# legacy qdev typename. These types are always treated as strings.
-#
-# 3) A child type in the form 'child<subtype>' where subtype is a qdev
+# 2) A child type in the form 'child<subtype>' where subtype is a qdev
# device type name. Child properties create the composition tree.
#
-# 4) A link type in the form 'link<subtype>' where subtype is a qdev
+# 3) A link type in the form 'link<subtype>' where subtype is a qdev
# device type name. Link properties form the device model graph.
#
# Since: 1.2
#
# @property: The property name to read
#
-# Returns: The property value. The type depends on the property type. legacy<>
-# properties are returned as #str. child<> and link<> properties are
-# returns as #str pathnames. All integer property types (u8, u16, etc)
-# are returned as #int.
+# Returns: The property value. The type depends on the property
+# type. child<> and link<> properties are returned as #str
+# pathnames. All integer property types (u8, u16, etc) are
+# returned as #int.
#
# Since: 1.2
##
{ 'command': 'qom-get',
'data': { 'path': 'str', 'property': 'str' },
- 'returns': '**',
- 'gen': false }
+ 'returns': 'any' }
##
# @qom-set:
# Since: 1.2
##
{ 'command': 'qom-set',
- 'data': { 'path': 'str', 'property': 'str', 'value': '**' },
- 'gen': false }
+ 'data': { 'path': 'str', 'property': 'str', 'value': 'any' } }
##
# @set_password:
# device's password. The behavior of reads and writes to the block
# device between when these calls are executed is undefined.
#
-# Notes: It is strongly recommended that this interface is not used especially
-# for changing block devices.
+# Notes: This interface is deprecated, and it is strongly recommended that you
+# avoid using it. For changing block devices, use
+# blockdev-change-medium; for changing VNC parameters, use
+# change-vnc-password.
#
# Since: 0.14.0
##
#
# Remove a device from a guest
#
-# @id: the name of the device
+# @id: the name or QOM path of the device
#
# Returns: Nothing on success
# If @id is not a valid device, DeviceNotFound
# @dump-guest-memory
#
# Dump guest's memory to vmcore. It is a synchronous operation that can take
-# very long depending on the amount of guest memory. This command is only
-# supported on i386 and x86_64.
+# very long depending on the amount of guest memory.
#
# @paging: if true, do paging to get guest's memory mapping. This allows
# using gdb to process the core file.
# 2. The guest can be in real-mode even if paging is enabled. For
# example, the guest uses ACPI to sleep, and ACPI sleep state
# goes in real-mode
+# 3. Currently only supported on i386 and x86_64.
#
# @protocol: the filename or file descriptor of the vmcore. The supported
# protocols are:
# 2. fd: the protocol starts with "fd:", and the following string
# is the fd's name.
#
+# @detach: #optional if true, QMP will return immediately rather than
+# waiting for the dump to finish. The user can track progress
+# using "query-dump". (since 2.6).
+#
# @begin: #optional if specified, the starting physical address.
#
# @length: #optional if specified, the memory size, in bytes. If you don't
# Since: 1.2
##
{ 'command': 'dump-guest-memory',
- 'data': { 'paging': 'bool', 'protocol': 'str', '*begin': 'int',
- '*length': 'int', '*format': 'DumpGuestMemoryFormat' } }
+ 'data': { 'paging': 'bool', 'protocol': 'str', '*detach': 'bool',
+ '*begin': 'int', '*length': 'int',
+ '*format': 'DumpGuestMemoryFormat'} }
+
+##
+# @DumpStatus
+#
+# Describe the status of a long-running background guest memory dump.
+#
+# @none: no dump-guest-memory has started yet.
+#
+# @active: there is one dump running in background.
+#
+# @completed: the last dump has finished successfully.
+#
+# @failed: the last dump has failed.
+#
+# Since 2.6
+##
+{ 'enum': 'DumpStatus',
+ 'data': [ 'none', 'active', 'completed', 'failed' ] }
+
+##
+# @DumpQueryResult
+#
+# The result format for 'query-dump'.
+#
+# @status: enum of @DumpStatus, which shows current dump status
+#
+# @completed: bytes written in latest dump (uncompressed)
+#
+# @total: total bytes to be written in latest dump (uncompressed)
+#
+# Since 2.6
+##
+{ 'struct': 'DumpQueryResult',
+ 'data': { 'status': 'DumpStatus',
+ 'completed': 'int',
+ 'total': 'int' } }
+
+##
+# @query-dump
+#
+# Query latest dump status.
+#
+# Returns: A @DumpStatus object showing the dump status.
+#
+# Since: 2.6
+##
+{ 'command': 'query-dump', 'returns': 'DumpQueryResult' }
##
# @DumpGuestMemoryCapability:
{ 'command': 'query-dump-guest-memory-capability',
'returns': 'DumpGuestMemoryCapability' }
+##
+# @dump-skeys
+#
+# Dump guest's storage keys
+#
+# @filename: the path to the file to dump to
+#
+# This command is only supported on s390 architecture.
+#
+# Since: 2.5
+##
+{ 'command': 'dump-skeys',
+ 'data': { 'filename': 'str' } }
+
##
# @netdev_add:
#
#
# @id: the name of the new network backend
#
-# @props: #optional a list of properties to be passed to the backend in
-# the format 'name=value', like 'ifname=tap0,script=no'
+# Additional arguments depend on the type.
#
-# Notes: The semantics of @props is not well defined. Future commands will be
-# introduced that provide stronger typing for backend creation.
+# TODO This command effectively bypasses QAPI completely due to its
+# "additional arguments" business. It shouldn't have been added to
+# the schema in this form. It should be qapified properly, or
+# replaced by a properly qapified command.
#
# Since: 0.14.0
#
# If @type is not a valid network backend, DeviceNotFound
##
{ 'command': 'netdev_add',
- 'data': {'type': 'str', 'id': 'str', '*props': '**'},
- 'gen': false }
+ 'data': {'type': 'str', 'id': 'str'},
+ 'gen': false } # so we can get the additional arguments
##
# @netdev_del:
# Since: 2.0
##
{ 'command': 'object-add',
- 'data': {'qom-type': 'str', 'id': 'str', '*props': '**'},
- 'gen': false }
+ 'data': {'qom-type': 'str', 'id': 'str', '*props': 'any'} }
##
# @object-del:
#
# @restrict: #optional isolate the guest from the host
#
+# @ipv4: #optional whether to support IPv4, default true for enabled
+# (since 2.6)
+#
+# @ipv6: #optional whether to support IPv6, default true for enabled
+# (since 2.6)
+#
# @ip: #optional legacy parameter, use net= instead
#
-# @net: #optional IP address and optional netmask
+# @net: #optional IP network address that the guest will see, in the
+# form addr[/netmask] The netmask is optional, and can be
+# either in the form a.b.c.d or as a number of valid top-most
+# bits. Default is 10.0.2.0/24.
#
# @host: #optional guest-visible address of the host
#
# @dnssearch: #optional list of DNS suffixes to search, passed as DHCP option
# to the guest
#
+# @ipv6-prefix: #optional IPv6 network prefix (default is fec0::) (since
+# 2.6). The network prefix is given in the usual
+# hexadecimal IPv6 address notation.
+#
+# @ipv6-prefixlen: #optional IPv6 network prefix length (default is 64)
+# (since 2.6)
+#
+# @ipv6-host: #optional guest-visible IPv6 address of the host (since 2.6)
+#
+# @ipv6-dns: #optional guest-visible IPv6 address of the virtual
+# nameserver (since 2.6)
+#
# @smb: #optional root directory of the built-in SMB server
#
# @smbserver: #optional IP address of the built-in SMB server
'data': {
'*hostname': 'str',
'*restrict': 'bool',
+ '*ipv4': 'bool',
+ '*ipv6': 'bool',
'*ip': 'str',
'*net': 'str',
'*host': 'str',
'*dhcpstart': 'str',
'*dns': 'str',
'*dnssearch': ['String'],
+ '*ipv6-prefix': 'str',
+ '*ipv6-prefixlen': 'int',
+ '*ipv6-host': 'str',
+ '*ipv6-dns': 'str',
'*smb': 'str',
'*smbserver': 'str',
'*hostfwd': ['String'],
#
# @vhostforce: #optional vhost on for non-MSIX virtio guests (default: false).
#
+# @queues: #optional number of queues to be created for multiqueue vhost-user
+# (default: 1) (Since 2.5)
+#
# Since 2.1
##
{ 'struct': 'NetdevVhostUserOptions',
'data': {
'chardev': 'str',
- '*vhostforce': 'bool' } }
+ '*vhostforce': 'bool',
+ '*queues': 'int' } }
##
# @NetClientOptions
'id': 'str',
'opts': 'NetClientOptions' } }
+##
+# @NetFilterDirection
+#
+# Indicates whether a netfilter is attached to a netdev's transmit queue or
+# receive queue or both.
+#
+# @all: the filter is attached both to the receive and the transmit
+# queue of the netdev (default).
+#
+# @rx: the filter is attached to the receive queue of the netdev,
+# where it will receive packets sent to the netdev.
+#
+# @tx: the filter is attached to the transmit queue of the netdev,
+# where it will receive packets sent by the netdev.
+#
+# Since 2.5
+##
+{ 'enum': 'NetFilterDirection',
+ 'data': [ 'all', 'rx', 'tx' ] }
+
##
# @InetSocketAddress
#
#
# 'unmapped' and 'pause' since 2.0
# 'ro' and 'kp_comma' since 2.4
+# 'kp_equals' and 'power' since 2.6
##
{ 'enum': 'QKeyCode',
'data': [ 'unmapped',
'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again',
'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut',
'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 'ro',
- 'kp_comma' ] }
+ 'kp_comma', 'kp_equals', 'power' ] }
##
# @KeyValue
##
{ 'command': 'screendump', 'data': {'filename': 'str'} }
+
+##
+# @ChardevCommon:
+#
+# Configuration shared across all chardev backends
+#
+# @logfile: #optional The name of a logfile to save output
+# @logappend: #optional true to append instead of truncate
+# (default to false to truncate)
+#
+# Since: 2.6
+##
+{ 'struct': 'ChardevCommon', 'data': { '*logfile': 'str',
+ '*logappend': 'bool' } }
+
##
# @ChardevFile:
#
#
# @in: #optional The name of the input file
# @out: The name of the output file
+# @append: #optional Open the file in append mode (default false to
+# truncate) (Since 2.6)
#
# Since: 1.4
##
{ 'struct': 'ChardevFile', 'data': { '*in' : 'str',
- 'out' : 'str' } }
+ 'out' : 'str',
+ '*append': 'bool' },
+ 'base': 'ChardevCommon' }
##
# @ChardevHostdev:
#
# Since: 1.4
##
-{ 'struct': 'ChardevHostdev', 'data': { 'device' : 'str' } }
+{ 'struct': 'ChardevHostdev', 'data': { 'device' : 'str' },
+ 'base': 'ChardevCommon' }
##
# @ChardevSocket:
#
# @addr: socket address to listen on (server=true)
# or connect to (server=false)
+# @tls-creds: #optional the ID of the TLS credentials object (since 2.6)
# @server: #optional create server socket (default: true)
# @wait: #optional wait for incoming connection on server
# sockets (default: false).
# Since: 1.4
##
{ 'struct': 'ChardevSocket', 'data': { 'addr' : 'SocketAddress',
+ '*tls-creds' : 'str',
'*server' : 'bool',
'*wait' : 'bool',
'*nodelay' : 'bool',
'*telnet' : 'bool',
- '*reconnect' : 'int' } }
+ '*reconnect' : 'int' },
+ 'base': 'ChardevCommon' }
##
# @ChardevUdp:
# Since: 1.5
##
{ 'struct': 'ChardevUdp', 'data': { 'remote' : 'SocketAddress',
- '*local' : 'SocketAddress' } }
+ '*local' : 'SocketAddress' },
+ 'base': 'ChardevCommon' }
##
# @ChardevMux:
#
# Since: 1.5
##
-{ 'struct': 'ChardevMux', 'data': { 'chardev' : 'str' } }
+{ 'struct': 'ChardevMux', 'data': { 'chardev' : 'str' },
+ 'base': 'ChardevCommon' }
##
# @ChardevStdio:
#
# Since: 1.5
##
-{ 'struct': 'ChardevStdio', 'data': { '*signal' : 'bool' } }
+{ 'struct': 'ChardevStdio', 'data': { '*signal' : 'bool' },
+ 'base': 'ChardevCommon' }
+
##
# @ChardevSpiceChannel:
#
# Since: 1.5
##
-{ 'struct': 'ChardevSpiceChannel', 'data': { 'type' : 'str' } }
+{ 'struct': 'ChardevSpiceChannel', 'data': { 'type' : 'str' },
+ 'base': 'ChardevCommon' }
##
# @ChardevSpicePort:
#
# Since: 1.5
##
-{ 'struct': 'ChardevSpicePort', 'data': { 'fqdn' : 'str' } }
+{ 'struct': 'ChardevSpicePort', 'data': { 'fqdn' : 'str' },
+ 'base': 'ChardevCommon' }
##
# @ChardevVC:
{ 'struct': 'ChardevVC', 'data': { '*width' : 'int',
'*height' : 'int',
'*cols' : 'int',
- '*rows' : 'int' } }
+ '*rows' : 'int' },
+ 'base': 'ChardevCommon' }
##
# @ChardevRingbuf:
#
# Since: 1.5
##
-{ 'struct': 'ChardevRingbuf', 'data': { '*size' : 'int' } }
+{ 'struct': 'ChardevRingbuf', 'data': { '*size' : 'int' },
+ 'base': 'ChardevCommon' }
##
# @ChardevBackend:
#
# Since: 1.4 (testdev since 2.2)
##
-{ 'struct': 'ChardevDummy', 'data': { } }
-
{ 'union': 'ChardevBackend', 'data': { 'file' : 'ChardevFile',
'serial' : 'ChardevHostdev',
'parallel': 'ChardevHostdev',
'pipe' : 'ChardevHostdev',
'socket' : 'ChardevSocket',
'udp' : 'ChardevUdp',
- 'pty' : 'ChardevDummy',
- 'null' : 'ChardevDummy',
+ 'pty' : 'ChardevCommon',
+ 'null' : 'ChardevCommon',
'mux' : 'ChardevMux',
- 'msmouse': 'ChardevDummy',
- 'braille': 'ChardevDummy',
- 'testdev': 'ChardevDummy',
+ 'msmouse': 'ChardevCommon',
+ 'braille': 'ChardevCommon',
+ 'testdev': 'ChardevCommon',
'stdio' : 'ChardevStdio',
- 'console': 'ChardevDummy',
+ 'console': 'ChardevCommon',
'spicevmc' : 'ChardevSpiceChannel',
'spiceport' : 'ChardevSpicePort',
'vc' : 'ChardevVC',
'cpuid-register': 'X86CPURegister32',
'features': 'int' } }
+##
+# @DummyForceArrays
+#
+# Not used by QMP; hack to let us use X86CPUFeatureWordInfoList internally
+#
+# Since 2.5
+##
+{ 'struct': 'DummyForceArrays',
+ 'data': { 'unused': ['X86CPUFeatureWordInfo'] } }
+
+
##
# @RxState:
#
# Since: 2.0
##
{ 'enum' : 'InputButton',
- 'data' : [ 'Left', 'Middle', 'Right', 'WheelUp', 'WheelDown' ] }
+ 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down' ] }
##
-# @InputButton
+# @InputAxis
#
# Position axis of a pointer input device (mouse, tablet).
#
# Since: 2.0
##
{ 'enum' : 'InputAxis',
- 'data' : [ 'X', 'Y' ] }
+ 'data' : [ 'x', 'y' ] }
##
# @InputKeyEvent
'abs' : 'InputMoveEvent' } }
##
-# @x-input-send-event
+# @input-send-event
#
# Send input event(s) to guest.
#
-# @console: #optional console to send event(s) to.
-# This parameter can be used to send the input event to
-# specific input devices in case (a) multiple input devices
-# of the same kind are added to the virtual machine and (b)
-# you have configured input routing (see docs/multiseat.txt)
-# for those input devices. If input routing is not
-# configured this parameter has no effect.
-# If @console is missing, only devices that aren't associated
-# with a console are admissible.
-# If @console is specified, it must exist, and both devices
-# associated with that console and devices not associated with a
-# console are admissible, but the former take precedence.
-
-#
+# @device: #optional display device to send event(s) to.
+# @head: #optional head to send event(s) to, in case the
+# display device supports multiple scanouts.
# @events: List of InputEvent union.
#
# Returns: Nothing on success.
#
-# Since: 2.2
-#
-# Note: this command is experimental, and not a stable API.
+# The @display and @head parameters can be used to send the input
+# event to specific input devices in case (a) multiple input devices
+# of the same kind are added to the virtual machine and (b) you have
+# configured input routing (see docs/multiseat.txt) for those input
+# devices. The parameters work exactly like the device and head
+# properties of input devices. If @device is missing, only devices
+# that have no input routing config are admissible. If @device is
+# specified, both input devices with and without input routing config
+# are admissible, but devices with input routing config take
+# precedence.
#
+# Since: 2.6
##
-{ 'command': 'x-input-send-event',
- 'data': { '*console':'int', 'events': [ 'InputEvent' ] } }
+{ 'command': 'input-send-event',
+ 'data': { '*device': 'str',
+ '*head' : 'int',
+ 'events' : [ 'InputEvent' ] } }
##
# @NumaOptions
# Rocker ethernet network switch
{ 'include': 'qapi/rocker.json' }
+
+##
+# ReplayMode:
+#
+# Mode of the replay subsystem.
+#
+# @none: normal execution mode. Replay or record are not enabled.
+#
+# @record: record mode. All non-deterministic data is written into the
+# replay log.
+#
+# @play: replay mode. Non-deterministic data required for system execution
+# is read from the log.
+#
+# Since: 2.5
+##
+{ 'enum': 'ReplayMode',
+ 'data': [ 'none', 'record', 'play' ] }
+
+##
+# @GICCapability:
+#
+# The struct describes capability for a specific GIC (Generic
+# Interrupt Controller) version. These bits are not only decided by
+# QEMU/KVM software version, but also decided by the hardware that
+# the program is running upon.
+#
+# @version: version of GIC to be described. Currently, only 2 and 3
+# are supported.
+#
+# @emulated: whether current QEMU/hardware supports emulated GIC
+# device in user space.
+#
+# @kernel: whether current QEMU/hardware supports hardware
+# accelerated GIC device in kernel.
+#
+# Since: 2.6
+##
+{ 'struct': 'GICCapability',
+ 'data': { 'version': 'int',
+ 'emulated': 'bool',
+ 'kernel': 'bool' } }
+
+##
+# @query-gic-capabilities:
+#
+# This command is ARM-only. It will return a list of GICCapability
+# objects that describe its capability bits.
+#
+# Returns: a list of GICCapability objects.
+#
+# Since: 2.6
+##
+{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'] }
Code Review / kvmfornfv.git / blobdiff