--- /dev/null
+/*
+ * Postcopy migration for RAM
+ *
+ * Copyright 2013-2015 Red Hat, Inc. and/or its affiliates
+ *
+ * Authors:
+ * Dave Gilbert <dgilbert@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+/*
+ * Postcopy is a migration technique where the execution flips from the
+ * source to the destination before all the data has been copied.
+ */
+
+#include "qemu/osdep.h"
+#include <glib.h>
+
+#include "qemu-common.h"
+#include "migration/migration.h"
+#include "migration/postcopy-ram.h"
+#include "sysemu/sysemu.h"
+#include "sysemu/balloon.h"
+#include "qemu/error-report.h"
+#include "trace.h"
+
+/* Arbitrary limit on size of each discard command,
+ * keeps them around ~200 bytes
+ */
+#define MAX_DISCARDS_PER_COMMAND 12
+
+struct PostcopyDiscardState {
+ const char *ramblock_name;
+ uint64_t offset; /* Bitmap entry for the 1st bit of this RAMBlock */
+ uint16_t cur_entry;
+ /*
+ * Start and length of a discard range (bytes)
+ */
+ uint64_t start_list[MAX_DISCARDS_PER_COMMAND];
+ uint64_t length_list[MAX_DISCARDS_PER_COMMAND];
+ unsigned int nsentwords;
+ unsigned int nsentcmds;
+};
+
+/* Postcopy needs to detect accesses to pages that haven't yet been copied
+ * across, and efficiently map new pages in, the techniques for doing this
+ * are target OS specific.
+ */
+#if defined(__linux__)
+
+#include <poll.h>
+#include <sys/mman.h>
+#include <sys/ioctl.h>
+#include <sys/syscall.h>
+#include <asm/types.h> /* for __u64 */
+#endif
+
+#if defined(__linux__) && defined(__NR_userfaultfd) && defined(CONFIG_EVENTFD)
+#include <sys/eventfd.h>
+#include <linux/userfaultfd.h>
+
+static bool ufd_version_check(int ufd)
+{
+ struct uffdio_api api_struct;
+ uint64_t ioctl_mask;
+
+ api_struct.api = UFFD_API;
+ api_struct.features = 0;
+ if (ioctl(ufd, UFFDIO_API, &api_struct)) {
+ error_report("postcopy_ram_supported_by_host: UFFDIO_API failed: %s",
+ strerror(errno));
+ return false;
+ }
+
+ ioctl_mask = (__u64)1 << _UFFDIO_REGISTER |
+ (__u64)1 << _UFFDIO_UNREGISTER;
+ if ((api_struct.ioctls & ioctl_mask) != ioctl_mask) {
+ error_report("Missing userfault features: %" PRIx64,
+ (uint64_t)(~api_struct.ioctls & ioctl_mask));
+ return false;
+ }
+
+ return true;
+}
+
+/*
+ * Note: This has the side effect of munlock'ing all of RAM, that's
+ * normally fine since if the postcopy succeeds it gets turned back on at the
+ * end.
+ */
+bool postcopy_ram_supported_by_host(void)
+{
+ long pagesize = getpagesize();
+ int ufd = -1;
+ bool ret = false; /* Error unless we change it */
+ void *testarea = NULL;
+ struct uffdio_register reg_struct;
+ struct uffdio_range range_struct;
+ uint64_t feature_mask;
+
+ if ((1ul << qemu_target_page_bits()) > pagesize) {
+ error_report("Target page size bigger than host page size");
+ goto out;
+ }
+
+ ufd = syscall(__NR_userfaultfd, O_CLOEXEC);
+ if (ufd == -1) {
+ error_report("%s: userfaultfd not available: %s", __func__,
+ strerror(errno));
+ goto out;
+ }
+
+ /* Version and features check */
+ if (!ufd_version_check(ufd)) {
+ goto out;
+ }
+
+ /*
+ * userfault and mlock don't go together; we'll put it back later if
+ * it was enabled.
+ */
+ if (munlockall()) {
+ error_report("%s: munlockall: %s", __func__, strerror(errno));
+ return -1;
+ }
+
+ /*
+ * We need to check that the ops we need are supported on anon memory
+ * To do that we need to register a chunk and see the flags that
+ * are returned.
+ */
+ testarea = mmap(NULL, pagesize, PROT_READ | PROT_WRITE, MAP_PRIVATE |
+ MAP_ANONYMOUS, -1, 0);
+ if (testarea == MAP_FAILED) {
+ error_report("%s: Failed to map test area: %s", __func__,
+ strerror(errno));
+ goto out;
+ }
+ g_assert(((size_t)testarea & (pagesize-1)) == 0);
+
+ reg_struct.range.start = (uintptr_t)testarea;
+ reg_struct.range.len = pagesize;
+ reg_struct.mode = UFFDIO_REGISTER_MODE_MISSING;
+
+ if (ioctl(ufd, UFFDIO_REGISTER, ®_struct)) {
+ error_report("%s userfault register: %s", __func__, strerror(errno));
+ goto out;
+ }
+
+ range_struct.start = (uintptr_t)testarea;
+ range_struct.len = pagesize;
+ if (ioctl(ufd, UFFDIO_UNREGISTER, &range_struct)) {
+ error_report("%s userfault unregister: %s", __func__, strerror(errno));
+ goto out;
+ }
+
+ feature_mask = (__u64)1 << _UFFDIO_WAKE |
+ (__u64)1 << _UFFDIO_COPY |
+ (__u64)1 << _UFFDIO_ZEROPAGE;
+ if ((reg_struct.ioctls & feature_mask) != feature_mask) {
+ error_report("Missing userfault map features: %" PRIx64,
+ (uint64_t)(~reg_struct.ioctls & feature_mask));
+ goto out;
+ }
+
+ /* Success! */
+ ret = true;
+out:
+ if (testarea) {
+ munmap(testarea, pagesize);
+ }
+ if (ufd != -1) {
+ close(ufd);
+ }
+ return ret;
+}
+
+/**
+ * postcopy_ram_discard_range: Discard a range of memory.
+ * We can assume that if we've been called postcopy_ram_hosttest returned true.
+ *
+ * @mis: Current incoming migration state.
+ * @start, @length: range of memory to discard.
+ *
+ * returns: 0 on success.
+ */
+int postcopy_ram_discard_range(MigrationIncomingState *mis, uint8_t *start,
+ size_t length)
+{
+ trace_postcopy_ram_discard_range(start, length);
+ if (madvise(start, length, MADV_DONTNEED)) {
+ error_report("%s MADV_DONTNEED: %s", __func__, strerror(errno));
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Setup an area of RAM so that it *can* be used for postcopy later; this
+ * must be done right at the start prior to pre-copy.
+ * opaque should be the MIS.
+ */
+static int init_range(const char *block_name, void *host_addr,
+ ram_addr_t offset, ram_addr_t length, void *opaque)
+{
+ MigrationIncomingState *mis = opaque;
+
+ trace_postcopy_init_range(block_name, host_addr, offset, length);
+
+ /*
+ * We need the whole of RAM to be truly empty for postcopy, so things
+ * like ROMs and any data tables built during init must be zero'd
+ * - we're going to get the copy from the source anyway.
+ * (Precopy will just overwrite this data, so doesn't need the discard)
+ */
+ if (postcopy_ram_discard_range(mis, host_addr, length)) {
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * At the end of migration, undo the effects of init_range
+ * opaque should be the MIS.
+ */
+static int cleanup_range(const char *block_name, void *host_addr,
+ ram_addr_t offset, ram_addr_t length, void *opaque)
+{
+ MigrationIncomingState *mis = opaque;
+ struct uffdio_range range_struct;
+ trace_postcopy_cleanup_range(block_name, host_addr, offset, length);
+
+ /*
+ * We turned off hugepage for the precopy stage with postcopy enabled
+ * we can turn it back on now.
+ */
+ qemu_madvise(host_addr, length, QEMU_MADV_HUGEPAGE);
+
+ /*
+ * We can also turn off userfault now since we should have all the
+ * pages. It can be useful to leave it on to debug postcopy
+ * if you're not sure it's always getting every page.
+ */
+ range_struct.start = (uintptr_t)host_addr;
+ range_struct.len = length;
+
+ if (ioctl(mis->userfault_fd, UFFDIO_UNREGISTER, &range_struct)) {
+ error_report("%s: userfault unregister %s", __func__, strerror(errno));
+
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Initialise postcopy-ram, setting the RAM to a state where we can go into
+ * postcopy later; must be called prior to any precopy.
+ * called from arch_init's similarly named ram_postcopy_incoming_init
+ */
+int postcopy_ram_incoming_init(MigrationIncomingState *mis, size_t ram_pages)
+{
+ if (qemu_ram_foreach_block(init_range, mis)) {
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * At the end of a migration where postcopy_ram_incoming_init was called.
+ */
+int postcopy_ram_incoming_cleanup(MigrationIncomingState *mis)
+{
+ trace_postcopy_ram_incoming_cleanup_entry();
+
+ if (mis->have_fault_thread) {
+ uint64_t tmp64;
+
+ if (qemu_ram_foreach_block(cleanup_range, mis)) {
+ return -1;
+ }
+ /*
+ * Tell the fault_thread to exit, it's an eventfd that should
+ * currently be at 0, we're going to increment it to 1
+ */
+ tmp64 = 1;
+ if (write(mis->userfault_quit_fd, &tmp64, 8) == 8) {
+ trace_postcopy_ram_incoming_cleanup_join();
+ qemu_thread_join(&mis->fault_thread);
+ } else {
+ /* Not much we can do here, but may as well report it */
+ error_report("%s: incrementing userfault_quit_fd: %s", __func__,
+ strerror(errno));
+ }
+ trace_postcopy_ram_incoming_cleanup_closeuf();
+ close(mis->userfault_fd);
+ close(mis->userfault_quit_fd);
+ mis->have_fault_thread = false;
+ }
+
+ qemu_balloon_inhibit(false);
+
+ if (enable_mlock) {
+ if (os_mlock() < 0) {
+ error_report("mlock: %s", strerror(errno));
+ /*
+ * It doesn't feel right to fail at this point, we have a valid
+ * VM state.
+ */
+ }
+ }
+
+ postcopy_state_set(POSTCOPY_INCOMING_END);
+ migrate_send_rp_shut(mis, qemu_file_get_error(mis->from_src_file) != 0);
+
+ if (mis->postcopy_tmp_page) {
+ munmap(mis->postcopy_tmp_page, getpagesize());
+ mis->postcopy_tmp_page = NULL;
+ }
+ trace_postcopy_ram_incoming_cleanup_exit();
+ return 0;
+}
+
+/*
+ * Disable huge pages on an area
+ */
+static int nhp_range(const char *block_name, void *host_addr,
+ ram_addr_t offset, ram_addr_t length, void *opaque)
+{
+ trace_postcopy_nhp_range(block_name, host_addr, offset, length);
+
+ /*
+ * Before we do discards we need to ensure those discards really
+ * do delete areas of the page, even if THP thinks a hugepage would
+ * be a good idea, so force hugepages off.
+ */
+ qemu_madvise(host_addr, length, QEMU_MADV_NOHUGEPAGE);
+
+ return 0;
+}
+
+/*
+ * Userfault requires us to mark RAM as NOHUGEPAGE prior to discard
+ * however leaving it until after precopy means that most of the precopy
+ * data is still THPd
+ */
+int postcopy_ram_prepare_discard(MigrationIncomingState *mis)
+{
+ if (qemu_ram_foreach_block(nhp_range, mis)) {
+ return -1;
+ }
+
+ postcopy_state_set(POSTCOPY_INCOMING_DISCARD);
+
+ return 0;
+}
+
+/*
+ * Mark the given area of RAM as requiring notification to unwritten areas
+ * Used as a callback on qemu_ram_foreach_block.
+ * host_addr: Base of area to mark
+ * offset: Offset in the whole ram arena
+ * length: Length of the section
+ * opaque: MigrationIncomingState pointer
+ * Returns 0 on success
+ */
+static int ram_block_enable_notify(const char *block_name, void *host_addr,
+ ram_addr_t offset, ram_addr_t length,
+ void *opaque)
+{
+ MigrationIncomingState *mis = opaque;
+ struct uffdio_register reg_struct;
+
+ reg_struct.range.start = (uintptr_t)host_addr;
+ reg_struct.range.len = length;
+ reg_struct.mode = UFFDIO_REGISTER_MODE_MISSING;
+
+ /* Now tell our userfault_fd that it's responsible for this area */
+ if (ioctl(mis->userfault_fd, UFFDIO_REGISTER, ®_struct)) {
+ error_report("%s userfault register: %s", __func__, strerror(errno));
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Handle faults detected by the USERFAULT markings
+ */
+static void *postcopy_ram_fault_thread(void *opaque)
+{
+ MigrationIncomingState *mis = opaque;
+ struct uffd_msg msg;
+ int ret;
+ size_t hostpagesize = getpagesize();
+ RAMBlock *rb = NULL;
+ RAMBlock *last_rb = NULL; /* last RAMBlock we sent part of */
+
+ trace_postcopy_ram_fault_thread_entry();
+ qemu_sem_post(&mis->fault_thread_sem);
+
+ while (true) {
+ ram_addr_t rb_offset;
+ ram_addr_t in_raspace;
+ struct pollfd pfd[2];
+
+ /*
+ * We're mainly waiting for the kernel to give us a faulting HVA,
+ * however we can be told to quit via userfault_quit_fd which is
+ * an eventfd
+ */
+ pfd[0].fd = mis->userfault_fd;
+ pfd[0].events = POLLIN;
+ pfd[0].revents = 0;
+ pfd[1].fd = mis->userfault_quit_fd;
+ pfd[1].events = POLLIN; /* Waiting for eventfd to go positive */
+ pfd[1].revents = 0;
+
+ if (poll(pfd, 2, -1 /* Wait forever */) == -1) {
+ error_report("%s: userfault poll: %s", __func__, strerror(errno));
+ break;
+ }
+
+ if (pfd[1].revents) {
+ trace_postcopy_ram_fault_thread_quit();
+ break;
+ }
+
+ ret = read(mis->userfault_fd, &msg, sizeof(msg));
+ if (ret != sizeof(msg)) {
+ if (errno == EAGAIN) {
+ /*
+ * if a wake up happens on the other thread just after
+ * the poll, there is nothing to read.
+ */
+ continue;
+ }
+ if (ret < 0) {
+ error_report("%s: Failed to read full userfault message: %s",
+ __func__, strerror(errno));
+ break;
+ } else {
+ error_report("%s: Read %d bytes from userfaultfd expected %zd",
+ __func__, ret, sizeof(msg));
+ break; /* Lost alignment, don't know what we'd read next */
+ }
+ }
+ if (msg.event != UFFD_EVENT_PAGEFAULT) {
+ error_report("%s: Read unexpected event %ud from userfaultfd",
+ __func__, msg.event);
+ continue; /* It's not a page fault, shouldn't happen */
+ }
+
+ rb = qemu_ram_block_from_host(
+ (void *)(uintptr_t)msg.arg.pagefault.address,
+ true, &in_raspace, &rb_offset);
+ if (!rb) {
+ error_report("postcopy_ram_fault_thread: Fault outside guest: %"
+ PRIx64, (uint64_t)msg.arg.pagefault.address);
+ break;
+ }
+
+ rb_offset &= ~(hostpagesize - 1);
+ trace_postcopy_ram_fault_thread_request(msg.arg.pagefault.address,
+ qemu_ram_get_idstr(rb),
+ rb_offset);
+
+ /*
+ * Send the request to the source - we want to request one
+ * of our host page sizes (which is >= TPS)
+ */
+ if (rb != last_rb) {
+ last_rb = rb;
+ migrate_send_rp_req_pages(mis, qemu_ram_get_idstr(rb),
+ rb_offset, hostpagesize);
+ } else {
+ /* Save some space */
+ migrate_send_rp_req_pages(mis, NULL,
+ rb_offset, hostpagesize);
+ }
+ }
+ trace_postcopy_ram_fault_thread_exit();
+ return NULL;
+}
+
+int postcopy_ram_enable_notify(MigrationIncomingState *mis)
+{
+ /* Open the fd for the kernel to give us userfaults */
+ mis->userfault_fd = syscall(__NR_userfaultfd, O_CLOEXEC | O_NONBLOCK);
+ if (mis->userfault_fd == -1) {
+ error_report("%s: Failed to open userfault fd: %s", __func__,
+ strerror(errno));
+ return -1;
+ }
+
+ /*
+ * Although the host check already tested the API, we need to
+ * do the check again as an ABI handshake on the new fd.
+ */
+ if (!ufd_version_check(mis->userfault_fd)) {
+ return -1;
+ }
+
+ /* Now an eventfd we use to tell the fault-thread to quit */
+ mis->userfault_quit_fd = eventfd(0, EFD_CLOEXEC);
+ if (mis->userfault_quit_fd == -1) {
+ error_report("%s: Opening userfault_quit_fd: %s", __func__,
+ strerror(errno));
+ close(mis->userfault_fd);
+ return -1;
+ }
+
+ qemu_sem_init(&mis->fault_thread_sem, 0);
+ qemu_thread_create(&mis->fault_thread, "postcopy/fault",
+ postcopy_ram_fault_thread, mis, QEMU_THREAD_JOINABLE);
+ qemu_sem_wait(&mis->fault_thread_sem);
+ qemu_sem_destroy(&mis->fault_thread_sem);
+ mis->have_fault_thread = true;
+
+ /* Mark so that we get notified of accesses to unwritten areas */
+ if (qemu_ram_foreach_block(ram_block_enable_notify, mis)) {
+ return -1;
+ }
+
+ /*
+ * Ballooning can mark pages as absent while we're postcopying
+ * that would cause false userfaults.
+ */
+ qemu_balloon_inhibit(true);
+
+ trace_postcopy_ram_enable_notify();
+
+ return 0;
+}
+
+/*
+ * Place a host page (from) at (host) atomically
+ * returns 0 on success
+ */
+int postcopy_place_page(MigrationIncomingState *mis, void *host, void *from)
+{
+ struct uffdio_copy copy_struct;
+
+ copy_struct.dst = (uint64_t)(uintptr_t)host;
+ copy_struct.src = (uint64_t)(uintptr_t)from;
+ copy_struct.len = getpagesize();
+ copy_struct.mode = 0;
+
+ /* copy also acks to the kernel waking the stalled thread up
+ * TODO: We can inhibit that ack and only do it if it was requested
+ * which would be slightly cheaper, but we'd have to be careful
+ * of the order of updating our page state.
+ */
+ if (ioctl(mis->userfault_fd, UFFDIO_COPY, ©_struct)) {
+ int e = errno;
+ error_report("%s: %s copy host: %p from: %p",
+ __func__, strerror(e), host, from);
+
+ return -e;
+ }
+
+ trace_postcopy_place_page(host);
+ return 0;
+}
+
+/*
+ * Place a zero page at (host) atomically
+ * returns 0 on success
+ */
+int postcopy_place_page_zero(MigrationIncomingState *mis, void *host)
+{
+ struct uffdio_zeropage zero_struct;
+
+ zero_struct.range.start = (uint64_t)(uintptr_t)host;
+ zero_struct.range.len = getpagesize();
+ zero_struct.mode = 0;
+
+ if (ioctl(mis->userfault_fd, UFFDIO_ZEROPAGE, &zero_struct)) {
+ int e = errno;
+ error_report("%s: %s zero host: %p",
+ __func__, strerror(e), host);
+
+ return -e;
+ }
+
+ trace_postcopy_place_page_zero(host);
+ return 0;
+}
+
+/*
+ * Returns a target page of memory that can be mapped at a later point in time
+ * using postcopy_place_page
+ * The same address is used repeatedly, postcopy_place_page just takes the
+ * backing page away.
+ * Returns: Pointer to allocated page
+ *
+ */
+void *postcopy_get_tmp_page(MigrationIncomingState *mis)
+{
+ if (!mis->postcopy_tmp_page) {
+ mis->postcopy_tmp_page = mmap(NULL, getpagesize(),
+ PROT_READ | PROT_WRITE, MAP_PRIVATE |
+ MAP_ANONYMOUS, -1, 0);
+ if (!mis->postcopy_tmp_page) {
+ error_report("%s: %s", __func__, strerror(errno));
+ return NULL;
+ }
+ }
+
+ return mis->postcopy_tmp_page;
+}
+
+#else
+/* No target OS support, stubs just fail */
+bool postcopy_ram_supported_by_host(void)
+{
+ error_report("%s: No OS support", __func__);
+ return false;
+}
+
+int postcopy_ram_incoming_init(MigrationIncomingState *mis, size_t ram_pages)
+{
+ error_report("postcopy_ram_incoming_init: No OS support");
+ return -1;
+}
+
+int postcopy_ram_incoming_cleanup(MigrationIncomingState *mis)
+{
+ assert(0);
+ return -1;
+}
+
+int postcopy_ram_discard_range(MigrationIncomingState *mis, uint8_t *start,
+ size_t length)
+{
+ assert(0);
+ return -1;
+}
+
+int postcopy_ram_prepare_discard(MigrationIncomingState *mis)
+{
+ assert(0);
+ return -1;
+}
+
+int postcopy_ram_enable_notify(MigrationIncomingState *mis)
+{
+ assert(0);
+ return -1;
+}
+
+int postcopy_place_page(MigrationIncomingState *mis, void *host, void *from)
+{
+ assert(0);
+ return -1;
+}
+
+int postcopy_place_page_zero(MigrationIncomingState *mis, void *host)
+{
+ assert(0);
+ return -1;
+}
+
+void *postcopy_get_tmp_page(MigrationIncomingState *mis)
+{
+ assert(0);
+ return NULL;
+}
+
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * postcopy_discard_send_init: Called at the start of each RAMBlock before
+ * asking to discard individual ranges.
+ *
+ * @ms: The current migration state.
+ * @offset: the bitmap offset of the named RAMBlock in the migration
+ * bitmap.
+ * @name: RAMBlock that discards will operate on.
+ *
+ * returns: a new PDS.
+ */
+PostcopyDiscardState *postcopy_discard_send_init(MigrationState *ms,
+ unsigned long offset,
+ const char *name)
+{
+ PostcopyDiscardState *res = g_malloc0(sizeof(PostcopyDiscardState));
+
+ if (res) {
+ res->ramblock_name = name;
+ res->offset = offset;
+ }
+
+ return res;
+}
+
+/**
+ * postcopy_discard_send_range: Called by the bitmap code for each chunk to
+ * discard. May send a discard message, may just leave it queued to
+ * be sent later.
+ *
+ * @ms: Current migration state.
+ * @pds: Structure initialised by postcopy_discard_send_init().
+ * @start,@length: a range of pages in the migration bitmap in the
+ * RAM block passed to postcopy_discard_send_init() (length=1 is one page)
+ */
+void postcopy_discard_send_range(MigrationState *ms, PostcopyDiscardState *pds,
+ unsigned long start, unsigned long length)
+{
+ size_t tp_bits = qemu_target_page_bits();
+ /* Convert to byte offsets within the RAM block */
+ pds->start_list[pds->cur_entry] = (start - pds->offset) << tp_bits;
+ pds->length_list[pds->cur_entry] = length << tp_bits;
+ trace_postcopy_discard_send_range(pds->ramblock_name, start, length);
+ pds->cur_entry++;
+ pds->nsentwords++;
+
+ if (pds->cur_entry == MAX_DISCARDS_PER_COMMAND) {
+ /* Full set, ship it! */
+ qemu_savevm_send_postcopy_ram_discard(ms->to_dst_file,
+ pds->ramblock_name,
+ pds->cur_entry,
+ pds->start_list,
+ pds->length_list);
+ pds->nsentcmds++;
+ pds->cur_entry = 0;
+ }
+}
+
+/**
+ * postcopy_discard_send_finish: Called at the end of each RAMBlock by the
+ * bitmap code. Sends any outstanding discard messages, frees the PDS
+ *
+ * @ms: Current migration state.
+ * @pds: Structure initialised by postcopy_discard_send_init().
+ */
+void postcopy_discard_send_finish(MigrationState *ms, PostcopyDiscardState *pds)
+{
+ /* Anything unsent? */
+ if (pds->cur_entry) {
+ qemu_savevm_send_postcopy_ram_discard(ms->to_dst_file,
+ pds->ramblock_name,
+ pds->cur_entry,
+ pds->start_list,
+ pds->length_list);
+ pds->nsentcmds++;
+ }
+
+ trace_postcopy_discard_send_finish(pds->ramblock_name, pds->nsentwords,
+ pds->nsentcmds);
+
+ g_free(pds);
+}
Code Review / kvmfornfv.git / blobdiff