Add qemu 2.4.0

[kvmfornfv.git] / qemu / include / hw / usb / ehci-regs.h

diff --git a/qemu/include/hw/usb/ehci-regs.h b/qemu/include/hw/usb/ehci-regs.h
new file mode 100644 (file)
index 0000000..616f1b8
--- /dev/null
+++ b/qemu/include/hw/usb/ehci-regs.h
@@ -0,0 +1,82 @@
+#ifndef HW_USB_EHCI_REGS_H
+#define HW_USB_EHCI_REGS_H 1
+
+/* Capability Registers Base Address - section 2.2 */
+#define CAPLENGTH        0x0000  /* 1-byte, 0x0001 reserved */
+#define HCIVERSION       0x0002  /* 2-bytes, i/f version # */
+#define HCSPARAMS        0x0004  /* 4-bytes, structural params */
+#define HCCPARAMS        0x0008  /* 4-bytes, capability params */
+#define EECP             HCCPARAMS + 1
+#define HCSPPORTROUTE1   0x000c
+#define HCSPPORTROUTE2   0x0010
+
+#define USBCMD           0x0000
+#define USBCMD_RUNSTOP   (1 << 0)      // run / Stop
+#define USBCMD_HCRESET   (1 << 1)      // HC Reset
+#define USBCMD_FLS       (3 << 2)      // Frame List Size
+#define USBCMD_FLS_SH    2             // Frame List Size Shift
+#define USBCMD_PSE       (1 << 4)      // Periodic Schedule Enable
+#define USBCMD_ASE       (1 << 5)      // Asynch Schedule Enable
+#define USBCMD_IAAD      (1 << 6)      // Int Asynch Advance Doorbell
+#define USBCMD_LHCR      (1 << 7)      // Light Host Controller Reset
+#define USBCMD_ASPMC     (3 << 8)      // Async Sched Park Mode Count
+#define USBCMD_ASPME     (1 << 11)     // Async Sched Park Mode Enable
+#define USBCMD_ITC       (0x7f << 16)  // Int Threshold Control
+#define USBCMD_ITC_SH    16            // Int Threshold Control Shift
+
+#define USBSTS           0x0004
+#define USBSTS_RO_MASK   0x0000003f
+#define USBSTS_INT       (1 << 0)      // USB Interrupt
+#define USBSTS_ERRINT    (1 << 1)      // Error Interrupt
+#define USBSTS_PCD       (1 << 2)      // Port Change Detect
+#define USBSTS_FLR       (1 << 3)      // Frame List Rollover
+#define USBSTS_HSE       (1 << 4)      // Host System Error
+#define USBSTS_IAA       (1 << 5)      // Interrupt on Async Advance
+#define USBSTS_HALT      (1 << 12)     // HC Halted
+#define USBSTS_REC       (1 << 13)     // Reclamation
+#define USBSTS_PSS       (1 << 14)     // Periodic Schedule Status
+#define USBSTS_ASS       (1 << 15)     // Asynchronous Schedule Status
+
+/*
+ *  Interrupt enable bits correspond to the interrupt active bits in USBSTS
+ *  so no need to redefine here.
+ */
+#define USBINTR              0x0008
+#define USBINTR_MASK         0x0000003f
+
+#define FRINDEX              0x000c
+#define CTRLDSSEGMENT        0x0010
+#define PERIODICLISTBASE     0x0014
+#define ASYNCLISTADDR        0x0018
+#define ASYNCLISTADDR_MASK   0xffffffe0
+
+#define CONFIGFLAG           0x0040
+
+/*
+ * Bits that are reserved or are read-only are masked out of values
+ * written to us by software
+ */
+#define PORTSC_RO_MASK       0x007001c0
+#define PORTSC_RWC_MASK      0x0000002a
+#define PORTSC_WKOC_E        (1 << 22)    // Wake on Over Current Enable
+#define PORTSC_WKDS_E        (1 << 21)    // Wake on Disconnect Enable
+#define PORTSC_WKCN_E        (1 << 20)    // Wake on Connect Enable
+#define PORTSC_PTC           (15 << 16)   // Port Test Control
+#define PORTSC_PTC_SH        16           // Port Test Control shift
+#define PORTSC_PIC           (3 << 14)    // Port Indicator Control
+#define PORTSC_PIC_SH        14           // Port Indicator Control Shift
+#define PORTSC_POWNER        (1 << 13)    // Port Owner
+#define PORTSC_PPOWER        (1 << 12)    // Port Power
+#define PORTSC_LINESTAT      (3 << 10)    // Port Line Status
+#define PORTSC_LINESTAT_SH   10           // Port Line Status Shift
+#define PORTSC_PRESET        (1 << 8)     // Port Reset
+#define PORTSC_SUSPEND       (1 << 7)     // Port Suspend
+#define PORTSC_FPRES         (1 << 6)     // Force Port Resume
+#define PORTSC_OCC           (1 << 5)     // Over Current Change
+#define PORTSC_OCA           (1 << 4)     // Over Current Active
+#define PORTSC_PEDC          (1 << 3)     // Port Enable/Disable Change
+#define PORTSC_PED           (1 << 2)     // Port Enable/Disable
+#define PORTSC_CSC           (1 << 1)     // Connect Status Change
+#define PORTSC_CONNECT       (1 << 0)     // Current Connect Status
+
+#endif /* HW_USB_EHCI_REGS_H */