--- /dev/null
+#if !defined(__HW_SPAPR_H__)
+#define __HW_SPAPR_H__
+
+#include "sysemu/dma.h"
+#include "hw/boards.h"
+#include "hw/ppc/xics.h"
+#include "hw/ppc/spapr_drc.h"
+
+struct VIOsPAPRBus;
+struct sPAPRPHBState;
+struct sPAPRNVRAM;
+typedef struct sPAPRConfigureConnectorState sPAPRConfigureConnectorState;
+typedef struct sPAPREventLogEntry sPAPREventLogEntry;
+
+#define HPTE64_V_HPTE_DIRTY 0x0000000000000040ULL
+#define SPAPR_ENTRY_POINT 0x100
+
+typedef struct sPAPRMachineClass sPAPRMachineClass;
+typedef struct sPAPRMachineState sPAPRMachineState;
+
+#define TYPE_SPAPR_MACHINE "spapr-machine"
+#define SPAPR_MACHINE(obj) \
+ OBJECT_CHECK(sPAPRMachineState, (obj), TYPE_SPAPR_MACHINE)
+#define SPAPR_MACHINE_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(sPAPRMachineClass, obj, TYPE_SPAPR_MACHINE)
+#define SPAPR_MACHINE_CLASS(klass) \
+ OBJECT_CLASS_CHECK(sPAPRMachineClass, klass, TYPE_SPAPR_MACHINE)
+
+/**
+ * sPAPRMachineClass:
+ */
+struct sPAPRMachineClass {
+ /*< private >*/
+ MachineClass parent_class;
+
+ /*< public >*/
+};
+
+/**
+ * sPAPRMachineState:
+ */
+struct sPAPRMachineState {
+ /*< private >*/
+ MachineState parent_obj;
+
+ struct VIOsPAPRBus *vio_bus;
+ QLIST_HEAD(, sPAPRPHBState) phbs;
+ struct sPAPRNVRAM *nvram;
+ XICSState *icp;
+ DeviceState *rtc;
+
+ void *htab;
+ uint32_t htab_shift;
+ hwaddr rma_size;
+ int vrma_adjust;
+ hwaddr fdt_addr, rtas_addr;
+ ssize_t rtas_size;
+ void *rtas_blob;
+ void *fdt_skel;
+ uint64_t rtc_offset; /* Now used only during incoming migration */
+ struct PPCTimebase tb;
+ bool has_graphics;
+
+ uint32_t check_exception_irq;
+ Notifier epow_notifier;
+ QTAILQ_HEAD(, sPAPREventLogEntry) pending_events;
+
+ /* Migration state */
+ int htab_save_index;
+ bool htab_first_pass;
+ int htab_fd;
+ bool htab_fd_stale;
+
+ /* RTAS state */
+ QTAILQ_HEAD(, sPAPRConfigureConnectorState) ccs_list;
+
+ /*< public >*/
+ char *kvm_type;
+};
+
+#define H_SUCCESS 0
+#define H_BUSY 1 /* Hardware busy -- retry later */
+#define H_CLOSED 2 /* Resource closed */
+#define H_NOT_AVAILABLE 3
+#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
+#define H_PARTIAL 5
+#define H_IN_PROGRESS 14 /* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE 16
+#define H_PENDING 17 /* returned from H_POLL_PENDING */
+#define H_CONTINUE 18 /* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
+ is a good time to retry */
+#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
+#define H_HARDWARE -1 /* Hardware error */
+#define H_FUNCTION -2 /* Function not supported */
+#define H_PRIVILEGE -3 /* Caller not privileged */
+#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE -5 /* Illegal msr value */
+#define H_PTEG_FULL -6 /* PTEG is full */
+#define H_NOT_FOUND -7 /* PTE was not found" */
+#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM -9
+#define H_AUTHORITY -10
+#define H_PERMISSION -11
+#define H_DROPPED -12
+#define H_SOURCE_PARM -13
+#define H_DEST_PARM -14
+#define H_REMOTE_PARM -15
+#define H_RESOURCE -16
+#define H_ADAPTER_PARM -17
+#define H_RH_PARM -18
+#define H_RCQ_PARM -19
+#define H_SCQ_PARM -20
+#define H_EQ_PARM -21
+#define H_RT_PARM -22
+#define H_ST_PARM -23
+#define H_SIGT_PARM -24
+#define H_TOKEN_PARM -25
+#define H_MLENGTH_PARM -27
+#define H_MEM_PARM -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM -30
+#define H_PORT_PARM -31
+#define H_MCG_PARM -32
+#define H_VL_PARM -33
+#define H_TSIZE_PARM -34
+#define H_TRACE_PARM -35
+
+#define H_MASK_PARM -37
+#define H_MCG_FULL -38
+#define H_ALIAS_EXIST -39
+#define H_P_COUNTER -40
+#define H_TABLE_FULL -41
+#define H_ALT_TABLE -42
+#define H_MR_CONDITION -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE -45
+#define H_RESCINDEND -46
+#define H_P2 -55
+#define H_P3 -56
+#define H_P4 -57
+#define H_P5 -58
+#define H_P6 -59
+#define H_P7 -60
+#define H_P8 -61
+#define H_P9 -62
+#define H_UNSUPPORTED_FLAG -256
+#define H_MULTI_THREADS_ACTIVE -9005
+
+
+/* Long Busy is a condition that can be returned by the firmware
+ * when a call cannot be completed now, but the identical call
+ * should be retried later. This prevents calls blocking in the
+ * firmware for long periods of time. Annoyingly the firmware can return
+ * a range of return codes, hinting at how long we should wait before
+ * retrying. If you don't care for the hint, the macro below is a good
+ * way to check for the long_busy return codes
+ */
+#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
+ && (x <= H_LONG_BUSY_END_RANGE))
+
+/* Flags */
+#define H_LARGE_PAGE (1ULL<<(63-16))
+#define H_EXACT (1ULL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */
+#define H_R_XLATE (1ULL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */
+#define H_READ_4 (1ULL<<(63-26)) /* Return 4 PTEs */
+#define H_PAGE_STATE_CHANGE (1ULL<<(63-28))
+#define H_PAGE_UNUSED ((1ULL<<(63-29)) | (1ULL<<(63-30)))
+#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
+#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1ULL<<(63-31)))
+#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
+#define H_AVPN (1ULL<<(63-32)) /* An avpn is provided as a sanity test */
+#define H_ANDCOND (1ULL<<(63-33))
+#define H_ICACHE_INVALIDATE (1ULL<<(63-40)) /* icbi, etc. (ignored for IO pages) */
+#define H_ICACHE_SYNCHRONIZE (1ULL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */
+#define H_ZERO_PAGE (1ULL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */
+#define H_COPY_PAGE (1ULL<<(63-49))
+#define H_N (1ULL<<(63-61))
+#define H_PP1 (1ULL<<(63-62))
+#define H_PP2 (1ULL<<(63-63))
+
+/* Values for 2nd argument to H_SET_MODE */
+#define H_SET_MODE_RESOURCE_SET_CIABR 1
+#define H_SET_MODE_RESOURCE_SET_DAWR 2
+#define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3
+#define H_SET_MODE_RESOURCE_LE 4
+
+/* Flags for H_SET_MODE_RESOURCE_LE */
+#define H_SET_MODE_ENDIAN_BIG 0
+#define H_SET_MODE_ENDIAN_LITTLE 1
+
+/* Flags for H_SET_MODE_RESOURCE_ADDR_TRANS_MODE */
+#define H_SET_MODE_ADDR_TRANS_NONE 0
+#define H_SET_MODE_ADDR_TRANS_0001_8000 2
+#define H_SET_MODE_ADDR_TRANS_C000_0000_0000_4000 3
+
+/* VASI States */
+#define H_VASI_INVALID 0
+#define H_VASI_ENABLED 1
+#define H_VASI_ABORTED 2
+#define H_VASI_SUSPENDING 3
+#define H_VASI_SUSPENDED 4
+#define H_VASI_RESUMED 5
+#define H_VASI_COMPLETED 6
+
+/* DABRX flags */
+#define H_DABRX_HYPERVISOR (1ULL<<(63-61))
+#define H_DABRX_KERNEL (1ULL<<(63-62))
+#define H_DABRX_USER (1ULL<<(63-63))
+
+/* Each control block has to be on a 4K boundary */
+#define H_CB_ALIGNMENT 4096
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE 0x04
+#define H_ENTER 0x08
+#define H_READ 0x0c
+#define H_CLEAR_MOD 0x10
+#define H_CLEAR_REF 0x14
+#define H_PROTECT 0x18
+#define H_GET_TCE 0x1c
+#define H_PUT_TCE 0x20
+#define H_SET_SPRG0 0x24
+#define H_SET_DABR 0x28
+#define H_PAGE_INIT 0x2c
+#define H_SET_ASR 0x30
+#define H_ASR_ON 0x34
+#define H_ASR_OFF 0x38
+#define H_LOGICAL_CI_LOAD 0x3c
+#define H_LOGICAL_CI_STORE 0x40
+#define H_LOGICAL_CACHE_LOAD 0x44
+#define H_LOGICAL_CACHE_STORE 0x48
+#define H_LOGICAL_ICBI 0x4c
+#define H_LOGICAL_DCBF 0x50
+#define H_GET_TERM_CHAR 0x54
+#define H_PUT_TERM_CHAR 0x58
+#define H_REAL_TO_LOGICAL 0x5c
+#define H_HYPERVISOR_DATA 0x60
+#define H_EOI 0x64
+#define H_CPPR 0x68
+#define H_IPI 0x6c
+#define H_IPOLL 0x70
+#define H_XIRR 0x74
+#define H_PERFMON 0x7c
+#define H_MIGRATE_DMA 0x78
+#define H_REGISTER_VPA 0xDC
+#define H_CEDE 0xE0
+#define H_CONFER 0xE4
+#define H_PROD 0xE8
+#define H_GET_PPP 0xEC
+#define H_SET_PPP 0xF0
+#define H_PURR 0xF4
+#define H_PIC 0xF8
+#define H_REG_CRQ 0xFC
+#define H_FREE_CRQ 0x100
+#define H_VIO_SIGNAL 0x104
+#define H_SEND_CRQ 0x108
+#define H_COPY_RDMA 0x110
+#define H_REGISTER_LOGICAL_LAN 0x114
+#define H_FREE_LOGICAL_LAN 0x118
+#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
+#define H_SEND_LOGICAL_LAN 0x120
+#define H_BULK_REMOVE 0x124
+#define H_MULTICAST_CTRL 0x130
+#define H_SET_XDABR 0x134
+#define H_STUFF_TCE 0x138
+#define H_PUT_TCE_INDIRECT 0x13C
+#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
+#define H_VTERM_PARTNER_INFO 0x150
+#define H_REGISTER_VTERM 0x154
+#define H_FREE_VTERM 0x158
+#define H_RESET_EVENTS 0x15C
+#define H_ALLOC_RESOURCE 0x160
+#define H_FREE_RESOURCE 0x164
+#define H_MODIFY_QP 0x168
+#define H_QUERY_QP 0x16C
+#define H_REREGISTER_PMR 0x170
+#define H_REGISTER_SMR 0x174
+#define H_QUERY_MR 0x178
+#define H_QUERY_MW 0x17C
+#define H_QUERY_HCA 0x180
+#define H_QUERY_PORT 0x184
+#define H_MODIFY_PORT 0x188
+#define H_DEFINE_AQP1 0x18C
+#define H_GET_TRACE_BUFFER 0x190
+#define H_DEFINE_AQP0 0x194
+#define H_RESIZE_MR 0x198
+#define H_ATTACH_MCQP 0x19C
+#define H_DETACH_MCQP 0x1A0
+#define H_CREATE_RPT 0x1A4
+#define H_REMOVE_RPT 0x1A8
+#define H_REGISTER_RPAGES 0x1AC
+#define H_DISABLE_AND_GETC 0x1B0
+#define H_ERROR_DATA 0x1B4
+#define H_GET_HCA_INFO 0x1B8
+#define H_GET_PERF_COUNT 0x1BC
+#define H_MANAGE_TRACE 0x1C0
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
+#define H_QUERY_INT_STATE 0x1E4
+#define H_POLL_PENDING 0x1D8
+#define H_ILLAN_ATTRIBUTES 0x244
+#define H_MODIFY_HEA_QP 0x250
+#define H_QUERY_HEA_QP 0x254
+#define H_QUERY_HEA 0x258
+#define H_QUERY_HEA_PORT 0x25C
+#define H_MODIFY_HEA_PORT 0x260
+#define H_REG_BCMC 0x264
+#define H_DEREG_BCMC 0x268
+#define H_REGISTER_HEA_RPAGES 0x26C
+#define H_DISABLE_AND_GET_HEA 0x270
+#define H_GET_HEA_INFO 0x274
+#define H_ALLOC_HEA_RESOURCE 0x278
+#define H_ADD_CONN 0x284
+#define H_DEL_CONN 0x288
+#define H_JOIN 0x298
+#define H_VASI_STATE 0x2A4
+#define H_ENABLE_CRQ 0x2B0
+#define H_GET_EM_PARMS 0x2B8
+#define H_SET_MPP 0x2D0
+#define H_GET_MPP 0x2D4
+#define H_XIRR_X 0x2FC
+#define H_SET_MODE 0x31C
+#define MAX_HCALL_OPCODE H_SET_MODE
+
+/* The hcalls above are standardized in PAPR and implemented by pHyp
+ * as well.
+ *
+ * We also need some hcalls which are specific to qemu / KVM-on-POWER.
+ * So far we just need one for H_RTAS, but in future we'll need more
+ * for extensions like virtio. We put those into the 0xf000-0xfffc
+ * range which is reserved by PAPR for "platform-specific" hcalls.
+ */
+#define KVMPPC_HCALL_BASE 0xf000
+#define KVMPPC_H_RTAS (KVMPPC_HCALL_BASE + 0x0)
+#define KVMPPC_H_LOGICAL_MEMOP (KVMPPC_HCALL_BASE + 0x1)
+/* Client Architecture support */
+#define KVMPPC_H_CAS (KVMPPC_HCALL_BASE + 0x2)
+#define KVMPPC_HCALL_MAX KVMPPC_H_CAS
+
+typedef struct sPAPRDeviceTreeUpdateHeader {
+ uint32_t version_id;
+} sPAPRDeviceTreeUpdateHeader;
+
+/*#define DEBUG_SPAPR_HCALLS*/
+
+#ifdef DEBUG_SPAPR_HCALLS
+#define hcall_dprintf(fmt, ...) \
+ do { fprintf(stderr, "%s: " fmt, __func__, ## __VA_ARGS__); } while (0)
+#else
+#define hcall_dprintf(fmt, ...) \
+ do { } while (0)
+#endif
+
+typedef target_ulong (*spapr_hcall_fn)(PowerPCCPU *cpu, sPAPRMachineState *sm,
+ target_ulong opcode,
+ target_ulong *args);
+
+void spapr_register_hypercall(target_ulong opcode, spapr_hcall_fn fn);
+target_ulong spapr_hypercall(PowerPCCPU *cpu, target_ulong opcode,
+ target_ulong *args);
+
+int spapr_allocate_irq(int hint, bool lsi);
+int spapr_allocate_irq_block(int num, bool lsi, bool msi);
+
+/* ibm,set-eeh-option */
+#define RTAS_EEH_DISABLE 0
+#define RTAS_EEH_ENABLE 1
+#define RTAS_EEH_THAW_IO 2
+#define RTAS_EEH_THAW_DMA 3
+
+/* ibm,get-config-addr-info2 */
+#define RTAS_GET_PE_ADDR 0
+#define RTAS_GET_PE_MODE 1
+#define RTAS_PE_MODE_NONE 0
+#define RTAS_PE_MODE_NOT_SHARED 1
+#define RTAS_PE_MODE_SHARED 2
+
+/* ibm,read-slot-reset-state2 */
+#define RTAS_EEH_PE_STATE_NORMAL 0
+#define RTAS_EEH_PE_STATE_RESET 1
+#define RTAS_EEH_PE_STATE_STOPPED_IO_DMA 2
+#define RTAS_EEH_PE_STATE_STOPPED_DMA 4
+#define RTAS_EEH_PE_STATE_UNAVAIL 5
+#define RTAS_EEH_NOT_SUPPORT 0
+#define RTAS_EEH_SUPPORT 1
+#define RTAS_EEH_PE_UNAVAIL_INFO 1000
+#define RTAS_EEH_PE_RECOVER_INFO 0
+
+/* ibm,set-slot-reset */
+#define RTAS_SLOT_RESET_DEACTIVATE 0
+#define RTAS_SLOT_RESET_HOT 1
+#define RTAS_SLOT_RESET_FUNDAMENTAL 3
+
+/* ibm,slot-error-detail */
+#define RTAS_SLOT_TEMP_ERR_LOG 1
+#define RTAS_SLOT_PERM_ERR_LOG 2
+
+/* RTAS return codes */
+#define RTAS_OUT_SUCCESS 0
+#define RTAS_OUT_NO_ERRORS_FOUND 1
+#define RTAS_OUT_HW_ERROR -1
+#define RTAS_OUT_BUSY -2
+#define RTAS_OUT_PARAM_ERROR -3
+#define RTAS_OUT_NOT_SUPPORTED -3
+#define RTAS_OUT_NOT_AUTHORIZED -9002
+
+/* RTAS tokens */
+#define RTAS_TOKEN_BASE 0x2000
+
+#define RTAS_DISPLAY_CHARACTER (RTAS_TOKEN_BASE + 0x00)
+#define RTAS_GET_TIME_OF_DAY (RTAS_TOKEN_BASE + 0x01)
+#define RTAS_SET_TIME_OF_DAY (RTAS_TOKEN_BASE + 0x02)
+#define RTAS_POWER_OFF (RTAS_TOKEN_BASE + 0x03)
+#define RTAS_SYSTEM_REBOOT (RTAS_TOKEN_BASE + 0x04)
+#define RTAS_QUERY_CPU_STOPPED_STATE (RTAS_TOKEN_BASE + 0x05)
+#define RTAS_START_CPU (RTAS_TOKEN_BASE + 0x06)
+#define RTAS_STOP_SELF (RTAS_TOKEN_BASE + 0x07)
+#define RTAS_IBM_GET_SYSTEM_PARAMETER (RTAS_TOKEN_BASE + 0x08)
+#define RTAS_IBM_SET_SYSTEM_PARAMETER (RTAS_TOKEN_BASE + 0x09)
+#define RTAS_IBM_SET_XIVE (RTAS_TOKEN_BASE + 0x0A)
+#define RTAS_IBM_GET_XIVE (RTAS_TOKEN_BASE + 0x0B)
+#define RTAS_IBM_INT_OFF (RTAS_TOKEN_BASE + 0x0C)
+#define RTAS_IBM_INT_ON (RTAS_TOKEN_BASE + 0x0D)
+#define RTAS_CHECK_EXCEPTION (RTAS_TOKEN_BASE + 0x0E)
+#define RTAS_EVENT_SCAN (RTAS_TOKEN_BASE + 0x0F)
+#define RTAS_IBM_SET_TCE_BYPASS (RTAS_TOKEN_BASE + 0x10)
+#define RTAS_QUIESCE (RTAS_TOKEN_BASE + 0x11)
+#define RTAS_NVRAM_FETCH (RTAS_TOKEN_BASE + 0x12)
+#define RTAS_NVRAM_STORE (RTAS_TOKEN_BASE + 0x13)
+#define RTAS_READ_PCI_CONFIG (RTAS_TOKEN_BASE + 0x14)
+#define RTAS_WRITE_PCI_CONFIG (RTAS_TOKEN_BASE + 0x15)
+#define RTAS_IBM_READ_PCI_CONFIG (RTAS_TOKEN_BASE + 0x16)
+#define RTAS_IBM_WRITE_PCI_CONFIG (RTAS_TOKEN_BASE + 0x17)
+#define RTAS_IBM_QUERY_INTERRUPT_SOURCE_NUMBER (RTAS_TOKEN_BASE + 0x18)
+#define RTAS_IBM_CHANGE_MSI (RTAS_TOKEN_BASE + 0x19)
+#define RTAS_SET_INDICATOR (RTAS_TOKEN_BASE + 0x1A)
+#define RTAS_SET_POWER_LEVEL (RTAS_TOKEN_BASE + 0x1B)
+#define RTAS_GET_POWER_LEVEL (RTAS_TOKEN_BASE + 0x1C)
+#define RTAS_GET_SENSOR_STATE (RTAS_TOKEN_BASE + 0x1D)
+#define RTAS_IBM_CONFIGURE_CONNECTOR (RTAS_TOKEN_BASE + 0x1E)
+#define RTAS_IBM_OS_TERM (RTAS_TOKEN_BASE + 0x1F)
+#define RTAS_IBM_SET_EEH_OPTION (RTAS_TOKEN_BASE + 0x20)
+#define RTAS_IBM_GET_CONFIG_ADDR_INFO2 (RTAS_TOKEN_BASE + 0x21)
+#define RTAS_IBM_READ_SLOT_RESET_STATE2 (RTAS_TOKEN_BASE + 0x22)
+#define RTAS_IBM_SET_SLOT_RESET (RTAS_TOKEN_BASE + 0x23)
+#define RTAS_IBM_CONFIGURE_PE (RTAS_TOKEN_BASE + 0x24)
+#define RTAS_IBM_SLOT_ERROR_DETAIL (RTAS_TOKEN_BASE + 0x25)
+
+#define RTAS_TOKEN_MAX (RTAS_TOKEN_BASE + 0x26)
+
+/* RTAS ibm,get-system-parameter token values */
+#define RTAS_SYSPARM_SPLPAR_CHARACTERISTICS 20
+#define RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE 42
+#define RTAS_SYSPARM_UUID 48
+
+/* RTAS indicator/sensor types
+ *
+ * as defined by PAPR+ 2.7 7.3.5.4, Table 41
+ *
+ * NOTE: currently only DR-related sensors are implemented here
+ */
+#define RTAS_SENSOR_TYPE_ISOLATION_STATE 9001
+#define RTAS_SENSOR_TYPE_DR 9002
+#define RTAS_SENSOR_TYPE_ALLOCATION_STATE 9003
+#define RTAS_SENSOR_TYPE_ENTITY_SENSE RTAS_SENSOR_TYPE_ALLOCATION_STATE
+
+/* Possible values for the platform-processor-diagnostics-run-mode parameter
+ * of the RTAS ibm,get-system-parameter call.
+ */
+#define DIAGNOSTICS_RUN_MODE_DISABLED 0
+#define DIAGNOSTICS_RUN_MODE_STAGGERED 1
+#define DIAGNOSTICS_RUN_MODE_IMMEDIATE 2
+#define DIAGNOSTICS_RUN_MODE_PERIODIC 3
+
+static inline uint64_t ppc64_phys_to_real(uint64_t addr)
+{
+ return addr & ~0xF000000000000000ULL;
+}
+
+static inline uint32_t rtas_ld(target_ulong phys, int n)
+{
+ return ldl_be_phys(&address_space_memory, ppc64_phys_to_real(phys + 4*n));
+}
+
+static inline void rtas_st(target_ulong phys, int n, uint32_t val)
+{
+ stl_be_phys(&address_space_memory, ppc64_phys_to_real(phys + 4*n), val);
+}
+
+static inline void rtas_st_buffer_direct(target_ulong phys,
+ target_ulong phys_len,
+ uint8_t *buffer, uint16_t buffer_len)
+{
+ cpu_physical_memory_write(ppc64_phys_to_real(phys), buffer,
+ MIN(buffer_len, phys_len));
+}
+
+static inline void rtas_st_buffer(target_ulong phys, target_ulong phys_len,
+ uint8_t *buffer, uint16_t buffer_len)
+{
+ if (phys_len < 2) {
+ return;
+ }
+ stw_be_phys(&address_space_memory,
+ ppc64_phys_to_real(phys), buffer_len);
+ rtas_st_buffer_direct(phys + 2, phys_len - 2, buffer, buffer_len);
+}
+
+typedef void (*spapr_rtas_fn)(PowerPCCPU *cpu, sPAPRMachineState *sm,
+ uint32_t token,
+ uint32_t nargs, target_ulong args,
+ uint32_t nret, target_ulong rets);
+void spapr_rtas_register(int token, const char *name, spapr_rtas_fn fn);
+target_ulong spapr_rtas_call(PowerPCCPU *cpu, sPAPRMachineState *sm,
+ uint32_t token, uint32_t nargs, target_ulong args,
+ uint32_t nret, target_ulong rets);
+int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr,
+ hwaddr rtas_size);
+
+#define SPAPR_TCE_PAGE_SHIFT 12
+#define SPAPR_TCE_PAGE_SIZE (1ULL << SPAPR_TCE_PAGE_SHIFT)
+#define SPAPR_TCE_PAGE_MASK (SPAPR_TCE_PAGE_SIZE - 1)
+
+#define SPAPR_VIO_BASE_LIOBN 0x00000000
+#define SPAPR_VIO_LIOBN(reg) (0x00000000 | (reg))
+#define SPAPR_PCI_LIOBN(phb_index, window_num) \
+ (0x80000000 | ((phb_index) << 8) | (window_num))
+#define SPAPR_IS_PCI_LIOBN(liobn) (!!((liobn) & 0x80000000))
+#define SPAPR_PCI_DMA_WINDOW_NUM(liobn) ((liobn) & 0xff)
+
+#define RTAS_ERROR_LOG_MAX 2048
+
+#define RTAS_EVENT_SCAN_RATE 1
+
+typedef struct sPAPRTCETable sPAPRTCETable;
+
+#define TYPE_SPAPR_TCE_TABLE "spapr-tce-table"
+#define SPAPR_TCE_TABLE(obj) \
+ OBJECT_CHECK(sPAPRTCETable, (obj), TYPE_SPAPR_TCE_TABLE)
+
+struct sPAPRTCETable {
+ DeviceState parent;
+ uint32_t liobn;
+ uint32_t nb_table;
+ uint64_t bus_offset;
+ uint32_t page_shift;
+ uint64_t *table;
+ bool bypass;
+ bool vfio_accel;
+ int fd;
+ MemoryRegion iommu;
+ struct VIOsPAPRDevice *vdev; /* for @bypass migration compatibility only */
+ QLIST_ENTRY(sPAPRTCETable) list;
+};
+
+sPAPRTCETable *spapr_tce_find_by_liobn(target_ulong liobn);
+
+struct sPAPREventLogEntry {
+ int log_type;
+ bool exception;
+ void *data;
+ QTAILQ_ENTRY(sPAPREventLogEntry) next;
+};
+
+void spapr_events_init(sPAPRMachineState *sm);
+void spapr_events_fdt_skel(void *fdt, uint32_t epow_irq);
+int spapr_h_cas_compose_response(sPAPRMachineState *sm,
+ target_ulong addr, target_ulong size);
+sPAPRTCETable *spapr_tce_new_table(DeviceState *owner, uint32_t liobn,
+ uint64_t bus_offset,
+ uint32_t page_shift,
+ uint32_t nb_table,
+ bool vfio_accel);
+MemoryRegion *spapr_tce_get_iommu(sPAPRTCETable *tcet);
+int spapr_dma_dt(void *fdt, int node_off, const char *propname,
+ uint32_t liobn, uint64_t window, uint32_t size);
+int spapr_tcet_dma_dt(void *fdt, int node_off, const char *propname,
+ sPAPRTCETable *tcet);
+void spapr_pci_switch_vga(bool big_endian);
+void spapr_hotplug_req_add_event(sPAPRDRConnector *drc);
+void spapr_hotplug_req_remove_event(sPAPRDRConnector *drc);
+
+/* rtas-configure-connector state */
+struct sPAPRConfigureConnectorState {
+ uint32_t drc_index;
+ int fdt_offset;
+ int fdt_depth;
+ QTAILQ_ENTRY(sPAPRConfigureConnectorState) next;
+};
+
+void spapr_ccs_reset_hook(void *opaque);
+
+#define TYPE_SPAPR_RTC "spapr-rtc"
+
+void spapr_rtc_read(DeviceState *dev, struct tm *tm, uint32_t *ns);
+int spapr_rtc_import_offset(DeviceState *dev, int64_t legacy_offset);
+
+#define SPAPR_MEMORY_BLOCK_SIZE (1 << 28) /* 256MB */
+
+#endif /* !defined (__HW_SPAPR_H__) */
Code Review / kvmfornfv.git / blobdiff