--- /dev/null
+#ifndef HW_ICH9_H
+#define HW_ICH9_H
+
+#include "hw/hw.h"
+#include "hw/isa/isa.h"
+#include "hw/sysbus.h"
+#include "hw/i386/pc.h"
+#include "hw/isa/apm.h"
+#include "hw/i386/ioapic.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pcie_host.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/acpi/acpi.h"
+#include "hw/acpi/ich9.h"
+#include "hw/pci/pci_bus.h"
+
+void ich9_lpc_set_irq(void *opaque, int irq_num, int level);
+int ich9_lpc_map_irq(PCIDevice *pci_dev, int intx);
+PCIINTxRoute ich9_route_intx_pin_to_irq(void *opaque, int pirq_pin);
+void ich9_lpc_pm_init(PCIDevice *pci_lpc, bool smm_enabled, bool enable_tco);
+I2CBus *ich9_smb_init(PCIBus *bus, int devfn, uint32_t smb_io_base);
+
+void ich9_generate_smi(void);
+void ich9_generate_nmi(void);
+
+#define ICH9_CC_SIZE (16 * 1024) /* 16KB */
+
+#define TYPE_ICH9_LPC_DEVICE "ICH9-LPC"
+#define ICH9_LPC_DEVICE(obj) \
+ OBJECT_CHECK(ICH9LPCState, (obj), TYPE_ICH9_LPC_DEVICE)
+
+typedef struct ICH9LPCState {
+ /* ICH9 LPC PCI to ISA bridge */
+ PCIDevice d;
+
+ /* (pci device, intx) -> pirq
+ * In real chipset case, the unused slots are never used
+ * as ICH9 supports only D25-D32 irq routing.
+ * On the other hand in qemu case, any slot/function can be populated
+ * via command line option.
+ * So fallback interrupt routing for any devices in any slots is necessary.
+ */
+ uint8_t irr[PCI_SLOT_MAX][PCI_NUM_PINS];
+
+ APMState apm;
+ ICH9LPCPMRegs pm;
+ uint32_t sci_level; /* track sci level */
+
+ /* 2.24 Pin Straps */
+ struct {
+ bool spkr_hi;
+ } pin_strap;
+
+ /* 10.1 Chipset Configuration registers(Memory Space)
+ which is pointed by RCBA */
+ uint8_t chip_config[ICH9_CC_SIZE];
+
+ /*
+ * 13.7.5 RST_CNT---Reset Control Register (LPC I/F---D31:F0)
+ *
+ * register contents and IO memory region
+ */
+ uint8_t rst_cnt;
+ MemoryRegion rst_cnt_mem;
+
+ /* isa bus */
+ ISABus *isa_bus;
+ MemoryRegion rbca_mem;
+ Notifier machine_ready;
+
+ qemu_irq *pic;
+ qemu_irq *ioapic;
+} ICH9LPCState;
+
+Object *ich9_lpc_find(void);
+
+#define Q35_MASK(bit, ms_bit, ls_bit) \
+((uint##bit##_t)(((1ULL << ((ms_bit) + 1)) - 1) & ~((1ULL << ls_bit) - 1)))
+
+/* ICH9: Chipset Configuration Registers */
+#define ICH9_CC_ADDR_MASK (ICH9_CC_SIZE - 1)
+
+#define ICH9_CC
+#define ICH9_CC_D28IP 0x310C
+#define ICH9_CC_D28IP_SHIFT 4
+#define ICH9_CC_D28IP_MASK 0xf
+#define ICH9_CC_D28IP_DEFAULT 0x00214321
+#define ICH9_CC_D31IR 0x3140
+#define ICH9_CC_D30IR 0x3142
+#define ICH9_CC_D29IR 0x3144
+#define ICH9_CC_D28IR 0x3146
+#define ICH9_CC_D27IR 0x3148
+#define ICH9_CC_D26IR 0x314C
+#define ICH9_CC_D25IR 0x3150
+#define ICH9_CC_DIR_DEFAULT 0x3210
+#define ICH9_CC_D30IR_DEFAULT 0x0
+#define ICH9_CC_DIR_SHIFT 4
+#define ICH9_CC_DIR_MASK 0x7
+#define ICH9_CC_OIC 0x31FF
+#define ICH9_CC_OIC_AEN 0x1
+#define ICH9_CC_GCS 0x3410
+#define ICH9_CC_GCS_DEFAULT 0x00000020
+#define ICH9_CC_GCS_NO_REBOOT (1 << 5)
+
+/* D28:F[0-5] */
+#define ICH9_PCIE_DEV 28
+#define ICH9_PCIE_FUNC_MAX 6
+
+
+/* D29:F0 USB UHCI Controller #1 */
+#define ICH9_USB_UHCI1_DEV 29
+#define ICH9_USB_UHCI1_FUNC 0
+
+/* D30:F0 DMI-to-PCI bridge */
+#define ICH9_D2P_BRIDGE "ICH9 D2P BRIDGE"
+#define ICH9_D2P_BRIDGE_SAVEVM_VERSION 0
+
+#define ICH9_D2P_BRIDGE_DEV 30
+#define ICH9_D2P_BRIDGE_FUNC 0
+
+#define ICH9_D2P_SECONDARY_DEFAULT (256 - 8)
+
+#define ICH9_D2P_A2_REVISION 0x92
+
+/* D31:F0 LPC Processor Interface */
+#define ICH9_RST_CNT_IOPORT 0xCF9
+
+/* D31:F1 LPC controller */
+#define ICH9_A2_LPC "ICH9 A2 LPC"
+#define ICH9_A2_LPC_SAVEVM_VERSION 0
+
+#define ICH9_LPC_DEV 31
+#define ICH9_LPC_FUNC 0
+
+#define ICH9_A2_LPC_REVISION 0x2
+#define ICH9_LPC_NB_PIRQS 8 /* PCI A-H */
+
+#define ICH9_LPC_PMBASE 0x40
+#define ICH9_LPC_PMBASE_BASE_ADDRESS_MASK Q35_MASK(32, 15, 7)
+#define ICH9_LPC_PMBASE_RTE 0x1
+#define ICH9_LPC_PMBASE_DEFAULT 0x1
+#define ICH9_LPC_ACPI_CTRL 0x44
+#define ICH9_LPC_ACPI_CTRL_ACPI_EN 0x80
+#define ICH9_LPC_ACPI_CTRL_SCI_IRQ_SEL_MASK Q35_MASK(8, 2, 0)
+#define ICH9_LPC_ACPI_CTRL_9 0x0
+#define ICH9_LPC_ACPI_CTRL_10 0x1
+#define ICH9_LPC_ACPI_CTRL_11 0x2
+#define ICH9_LPC_ACPI_CTRL_20 0x4
+#define ICH9_LPC_ACPI_CTRL_21 0x5
+#define ICH9_LPC_ACPI_CTRL_DEFAULT 0x0
+
+#define ICH9_LPC_PIRQA_ROUT 0x60
+#define ICH9_LPC_PIRQB_ROUT 0x61
+#define ICH9_LPC_PIRQC_ROUT 0x62
+#define ICH9_LPC_PIRQD_ROUT 0x63
+
+#define ICH9_LPC_PIRQE_ROUT 0x68
+#define ICH9_LPC_PIRQF_ROUT 0x69
+#define ICH9_LPC_PIRQG_ROUT 0x6a
+#define ICH9_LPC_PIRQH_ROUT 0x6b
+
+#define ICH9_LPC_PIRQ_ROUT_IRQEN 0x80
+#define ICH9_LPC_PIRQ_ROUT_MASK Q35_MASK(8, 3, 0)
+#define ICH9_LPC_PIRQ_ROUT_DEFAULT 0x80
+
+#define ICH9_LPC_GEN_PMCON_1 0xa0
+#define ICH9_LPC_GEN_PMCON_1_SMI_LOCK (1 << 4)
+#define ICH9_LPC_GEN_PMCON_2 0xa2
+#define ICH9_LPC_GEN_PMCON_3 0xa4
+#define ICH9_LPC_GEN_PMCON_LOCK 0xa6
+
+#define ICH9_LPC_RCBA 0xf0
+#define ICH9_LPC_RCBA_BA_MASK Q35_MASK(32, 31, 14)
+#define ICH9_LPC_RCBA_EN 0x1
+#define ICH9_LPC_RCBA_DEFAULT 0x0
+
+#define ICH9_LPC_PIC_NUM_PINS 16
+#define ICH9_LPC_IOAPIC_NUM_PINS 24
+
+/* D31:F2 SATA Controller #1 */
+#define ICH9_SATA1_DEV 31
+#define ICH9_SATA1_FUNC 2
+
+/* D30:F1 power management I/O registers
+ offset from the address ICH9_LPC_PMBASE */
+
+/* ICH9 LPC PM I/O registers are 128 ports and 128-aligned */
+#define ICH9_PMIO_SIZE 128
+#define ICH9_PMIO_MASK (ICH9_PMIO_SIZE - 1)
+
+#define ICH9_PMIO_PM1_STS 0x00
+#define ICH9_PMIO_PM1_EN 0x02
+#define ICH9_PMIO_PM1_CNT 0x04
+#define ICH9_PMIO_PM1_TMR 0x08
+#define ICH9_PMIO_GPE0_STS 0x20
+#define ICH9_PMIO_GPE0_EN 0x28
+#define ICH9_PMIO_GPE0_LEN 16
+#define ICH9_PMIO_SMI_EN 0x30
+#define ICH9_PMIO_SMI_EN_APMC_EN (1 << 5)
+#define ICH9_PMIO_SMI_EN_TCO_EN (1 << 13)
+#define ICH9_PMIO_SMI_STS 0x34
+#define ICH9_PMIO_TCO_RLD 0x60
+#define ICH9_PMIO_TCO_LEN 32
+
+/* FADT ACPI_ENABLE/ACPI_DISABLE */
+#define ICH9_APM_ACPI_ENABLE 0x2
+#define ICH9_APM_ACPI_DISABLE 0x3
+
+
+/* D31:F3 SMBus controller */
+#define ICH9_A2_SMB_REVISION 0x02
+#define ICH9_SMB_PI 0x00
+
+#define ICH9_SMB_SMBMBAR0 0x10
+#define ICH9_SMB_SMBMBAR1 0x14
+#define ICH9_SMB_SMBM_BAR 0
+#define ICH9_SMB_SMBM_SIZE (1 << 8)
+#define ICH9_SMB_SMB_BASE 0x20
+#define ICH9_SMB_SMB_BASE_BAR 4
+#define ICH9_SMB_SMB_BASE_SIZE (1 << 5)
+#define ICH9_SMB_HOSTC 0x40
+#define ICH9_SMB_HOSTC_SSRESET ((uint8_t)(1 << 3))
+#define ICH9_SMB_HOSTC_I2C_EN ((uint8_t)(1 << 2))
+#define ICH9_SMB_HOSTC_SMB_SMI_EN ((uint8_t)(1 << 1))
+#define ICH9_SMB_HOSTC_HST_EN ((uint8_t)(1 << 0))
+
+/* D31:F3 SMBus I/O and memory mapped I/O registers */
+#define ICH9_SMB_DEV 31
+#define ICH9_SMB_FUNC 3
+
+#define ICH9_SMB_HST_STS 0x00
+#define ICH9_SMB_HST_CNT 0x02
+#define ICH9_SMB_HST_CMD 0x03
+#define ICH9_SMB_XMIT_SLVA 0x04
+#define ICH9_SMB_HST_D0 0x05
+#define ICH9_SMB_HST_D1 0x06
+#define ICH9_SMB_HOST_BLOCK_DB 0x07
+
+#endif /* HW_ICH9_H */
Code Review / kvmfornfv.git / blobdiff