--- /dev/null
+/* Interface between the opcode library and its callers.
+ Written by Cygnus Support, 1993.
+
+ The opcode library (libopcodes.a) provides instruction decoders for
+ a large variety of instruction sets, callable with an identical
+ interface, for making instruction-processing programs more independent
+ of the instruction set being processed. */
+
+#ifndef DIS_ASM_H
+#define DIS_ASM_H
+
+#include "qemu-common.h"
+
+typedef void *PTR;
+typedef uint64_t bfd_vma;
+typedef int64_t bfd_signed_vma;
+typedef uint8_t bfd_byte;
+#define sprintf_vma(s,x) sprintf (s, "%0" PRIx64, x)
+#define snprintf_vma(s,ss,x) snprintf (s, ss, "%0" PRIx64, x)
+
+#define BFD64
+
+enum bfd_flavour {
+ bfd_target_unknown_flavour,
+ bfd_target_aout_flavour,
+ bfd_target_coff_flavour,
+ bfd_target_ecoff_flavour,
+ bfd_target_elf_flavour,
+ bfd_target_ieee_flavour,
+ bfd_target_nlm_flavour,
+ bfd_target_oasys_flavour,
+ bfd_target_tekhex_flavour,
+ bfd_target_srec_flavour,
+ bfd_target_ihex_flavour,
+ bfd_target_som_flavour,
+ bfd_target_os9k_flavour,
+ bfd_target_versados_flavour,
+ bfd_target_msdos_flavour,
+ bfd_target_evax_flavour
+};
+
+enum bfd_endian { BFD_ENDIAN_BIG, BFD_ENDIAN_LITTLE, BFD_ENDIAN_UNKNOWN };
+
+enum bfd_architecture
+{
+ bfd_arch_unknown, /* File arch not known */
+ bfd_arch_obscure, /* Arch known, not one of these */
+ bfd_arch_m68k, /* Motorola 68xxx */
+#define bfd_mach_m68000 1
+#define bfd_mach_m68008 2
+#define bfd_mach_m68010 3
+#define bfd_mach_m68020 4
+#define bfd_mach_m68030 5
+#define bfd_mach_m68040 6
+#define bfd_mach_m68060 7
+#define bfd_mach_cpu32 8
+#define bfd_mach_mcf5200 9
+#define bfd_mach_mcf5206e 10
+#define bfd_mach_mcf5307 11
+#define bfd_mach_mcf5407 12
+#define bfd_mach_mcf528x 13
+#define bfd_mach_mcfv4e 14
+#define bfd_mach_mcf521x 15
+#define bfd_mach_mcf5249 16
+#define bfd_mach_mcf547x 17
+#define bfd_mach_mcf548x 18
+ bfd_arch_vax, /* DEC Vax */
+ bfd_arch_i960, /* Intel 960 */
+ /* The order of the following is important.
+ lower number indicates a machine type that
+ only accepts a subset of the instructions
+ available to machines with higher numbers.
+ The exception is the "ca", which is
+ incompatible with all other machines except
+ "core". */
+
+#define bfd_mach_i960_core 1
+#define bfd_mach_i960_ka_sa 2
+#define bfd_mach_i960_kb_sb 3
+#define bfd_mach_i960_mc 4
+#define bfd_mach_i960_xa 5
+#define bfd_mach_i960_ca 6
+#define bfd_mach_i960_jx 7
+#define bfd_mach_i960_hx 8
+
+ bfd_arch_a29k, /* AMD 29000 */
+ bfd_arch_sparc, /* SPARC */
+#define bfd_mach_sparc 1
+/* The difference between v8plus and v9 is that v9 is a true 64 bit env. */
+#define bfd_mach_sparc_sparclet 2
+#define bfd_mach_sparc_sparclite 3
+#define bfd_mach_sparc_v8plus 4
+#define bfd_mach_sparc_v8plusa 5 /* with ultrasparc add'ns. */
+#define bfd_mach_sparc_sparclite_le 6
+#define bfd_mach_sparc_v9 7
+#define bfd_mach_sparc_v9a 8 /* with ultrasparc add'ns. */
+#define bfd_mach_sparc_v8plusb 9 /* with cheetah add'ns. */
+#define bfd_mach_sparc_v9b 10 /* with cheetah add'ns. */
+/* Nonzero if MACH has the v9 instruction set. */
+#define bfd_mach_sparc_v9_p(mach) \
+ ((mach) >= bfd_mach_sparc_v8plus && (mach) <= bfd_mach_sparc_v9b \
+ && (mach) != bfd_mach_sparc_sparclite_le)
+ bfd_arch_mips, /* MIPS Rxxxx */
+#define bfd_mach_mips3000 3000
+#define bfd_mach_mips3900 3900
+#define bfd_mach_mips4000 4000
+#define bfd_mach_mips4010 4010
+#define bfd_mach_mips4100 4100
+#define bfd_mach_mips4300 4300
+#define bfd_mach_mips4400 4400
+#define bfd_mach_mips4600 4600
+#define bfd_mach_mips4650 4650
+#define bfd_mach_mips5000 5000
+#define bfd_mach_mips6000 6000
+#define bfd_mach_mips8000 8000
+#define bfd_mach_mips10000 10000
+#define bfd_mach_mips16 16
+ bfd_arch_i386, /* Intel 386 */
+#define bfd_mach_i386_i386 0
+#define bfd_mach_i386_i8086 1
+#define bfd_mach_i386_i386_intel_syntax 2
+#define bfd_mach_x86_64 3
+#define bfd_mach_x86_64_intel_syntax 4
+ bfd_arch_we32k, /* AT&T WE32xxx */
+ bfd_arch_tahoe, /* CCI/Harris Tahoe */
+ bfd_arch_i860, /* Intel 860 */
+ bfd_arch_romp, /* IBM ROMP PC/RT */
+ bfd_arch_alliant, /* Alliant */
+ bfd_arch_convex, /* Convex */
+ bfd_arch_m88k, /* Motorola 88xxx */
+ bfd_arch_pyramid, /* Pyramid Technology */
+ bfd_arch_h8300, /* Hitachi H8/300 */
+#define bfd_mach_h8300 1
+#define bfd_mach_h8300h 2
+#define bfd_mach_h8300s 3
+ bfd_arch_powerpc, /* PowerPC */
+#define bfd_mach_ppc 0
+#define bfd_mach_ppc64 1
+#define bfd_mach_ppc_403 403
+#define bfd_mach_ppc_403gc 4030
+#define bfd_mach_ppc_e500 500
+#define bfd_mach_ppc_505 505
+#define bfd_mach_ppc_601 601
+#define bfd_mach_ppc_602 602
+#define bfd_mach_ppc_603 603
+#define bfd_mach_ppc_ec603e 6031
+#define bfd_mach_ppc_604 604
+#define bfd_mach_ppc_620 620
+#define bfd_mach_ppc_630 630
+#define bfd_mach_ppc_750 750
+#define bfd_mach_ppc_860 860
+#define bfd_mach_ppc_a35 35
+#define bfd_mach_ppc_rs64ii 642
+#define bfd_mach_ppc_rs64iii 643
+#define bfd_mach_ppc_7400 7400
+ bfd_arch_rs6000, /* IBM RS/6000 */
+ bfd_arch_hppa, /* HP PA RISC */
+#define bfd_mach_hppa10 10
+#define bfd_mach_hppa11 11
+#define bfd_mach_hppa20 20
+#define bfd_mach_hppa20w 25
+ bfd_arch_d10v, /* Mitsubishi D10V */
+ bfd_arch_z8k, /* Zilog Z8000 */
+#define bfd_mach_z8001 1
+#define bfd_mach_z8002 2
+ bfd_arch_h8500, /* Hitachi H8/500 */
+ bfd_arch_sh, /* Hitachi SH */
+#define bfd_mach_sh 1
+#define bfd_mach_sh2 0x20
+#define bfd_mach_sh_dsp 0x2d
+#define bfd_mach_sh2a 0x2a
+#define bfd_mach_sh2a_nofpu 0x2b
+#define bfd_mach_sh2e 0x2e
+#define bfd_mach_sh3 0x30
+#define bfd_mach_sh3_nommu 0x31
+#define bfd_mach_sh3_dsp 0x3d
+#define bfd_mach_sh3e 0x3e
+#define bfd_mach_sh4 0x40
+#define bfd_mach_sh4_nofpu 0x41
+#define bfd_mach_sh4_nommu_nofpu 0x42
+#define bfd_mach_sh4a 0x4a
+#define bfd_mach_sh4a_nofpu 0x4b
+#define bfd_mach_sh4al_dsp 0x4d
+#define bfd_mach_sh5 0x50
+ bfd_arch_alpha, /* Dec Alpha */
+#define bfd_mach_alpha 1
+#define bfd_mach_alpha_ev4 0x10
+#define bfd_mach_alpha_ev5 0x20
+#define bfd_mach_alpha_ev6 0x30
+ bfd_arch_arm, /* Advanced Risc Machines ARM */
+#define bfd_mach_arm_unknown 0
+#define bfd_mach_arm_2 1
+#define bfd_mach_arm_2a 2
+#define bfd_mach_arm_3 3
+#define bfd_mach_arm_3M 4
+#define bfd_mach_arm_4 5
+#define bfd_mach_arm_4T 6
+#define bfd_mach_arm_5 7
+#define bfd_mach_arm_5T 8
+#define bfd_mach_arm_5TE 9
+#define bfd_mach_arm_XScale 10
+#define bfd_mach_arm_ep9312 11
+#define bfd_mach_arm_iWMMXt 12
+#define bfd_mach_arm_iWMMXt2 13
+ bfd_arch_ns32k, /* National Semiconductors ns32000 */
+ bfd_arch_w65, /* WDC 65816 */
+ bfd_arch_tic30, /* Texas Instruments TMS320C30 */
+ bfd_arch_v850, /* NEC V850 */
+#define bfd_mach_v850 0
+ bfd_arch_arc, /* Argonaut RISC Core */
+#define bfd_mach_arc_base 0
+ bfd_arch_m32r, /* Mitsubishi M32R/D */
+#define bfd_mach_m32r 0 /* backwards compatibility */
+ bfd_arch_mn10200, /* Matsushita MN10200 */
+ bfd_arch_mn10300, /* Matsushita MN10300 */
+ bfd_arch_cris, /* Axis CRIS */
+#define bfd_mach_cris_v0_v10 255
+#define bfd_mach_cris_v32 32
+#define bfd_mach_cris_v10_v32 1032
+ bfd_arch_microblaze, /* Xilinx MicroBlaze. */
+ bfd_arch_moxie, /* The Moxie core. */
+ bfd_arch_ia64, /* HP/Intel ia64 */
+#define bfd_mach_ia64_elf64 64
+#define bfd_mach_ia64_elf32 32
+ bfd_arch_lm32, /* Lattice Mico32 */
+#define bfd_mach_lm32 1
+ bfd_arch_last
+ };
+#define bfd_mach_s390_31 31
+#define bfd_mach_s390_64 64
+
+typedef struct symbol_cache_entry
+{
+ const char *name;
+ union
+ {
+ PTR p;
+ bfd_vma i;
+ } udata;
+} asymbol;
+
+enum dis_insn_type {
+ dis_noninsn, /* Not a valid instruction */
+ dis_nonbranch, /* Not a branch instruction */
+ dis_branch, /* Unconditional branch */
+ dis_condbranch, /* Conditional branch */
+ dis_jsr, /* Jump to subroutine */
+ dis_condjsr, /* Conditional jump to subroutine */
+ dis_dref, /* Data reference instruction */
+ dis_dref2 /* Two data references in instruction */
+};
+
+/* This struct is passed into the instruction decoding routine,
+ and is passed back out into each callback. The various fields are used
+ for conveying information from your main routine into your callbacks,
+ for passing information into the instruction decoders (such as the
+ addresses of the callback functions), or for passing information
+ back from the instruction decoders to their callers.
+
+ It must be initialized before it is first passed; this can be done
+ by hand, or using one of the initialization macros below. */
+
+typedef struct disassemble_info {
+ fprintf_function fprintf_func;
+ FILE *stream;
+ PTR application_data;
+
+ /* Target description. We could replace this with a pointer to the bfd,
+ but that would require one. There currently isn't any such requirement
+ so to avoid introducing one we record these explicitly. */
+ /* The bfd_flavour. This can be bfd_target_unknown_flavour. */
+ enum bfd_flavour flavour;
+ /* The bfd_arch value. */
+ enum bfd_architecture arch;
+ /* The bfd_mach value. */
+ unsigned long mach;
+ /* Endianness (for bi-endian cpus). Mono-endian cpus can ignore this. */
+ enum bfd_endian endian;
+
+ /* An array of pointers to symbols either at the location being disassembled
+ or at the start of the function being disassembled. The array is sorted
+ so that the first symbol is intended to be the one used. The others are
+ present for any misc. purposes. This is not set reliably, but if it is
+ not NULL, it is correct. */
+ asymbol **symbols;
+ /* Number of symbols in array. */
+ int num_symbols;
+
+ /* For use by the disassembler.
+ The top 16 bits are reserved for public use (and are documented here).
+ The bottom 16 bits are for the internal use of the disassembler. */
+ unsigned long flags;
+#define INSN_HAS_RELOC 0x80000000
+ PTR private_data;
+
+ /* Function used to get bytes to disassemble. MEMADDR is the
+ address of the stuff to be disassembled, MYADDR is the address to
+ put the bytes in, and LENGTH is the number of bytes to read.
+ INFO is a pointer to this struct.
+ Returns an errno value or 0 for success. */
+ int (*read_memory_func)
+ (bfd_vma memaddr, bfd_byte *myaddr, int length,
+ struct disassemble_info *info);
+
+ /* Function which should be called if we get an error that we can't
+ recover from. STATUS is the errno value from read_memory_func and
+ MEMADDR is the address that we were trying to read. INFO is a
+ pointer to this struct. */
+ void (*memory_error_func)
+ (int status, bfd_vma memaddr, struct disassemble_info *info);
+
+ /* Function called to print ADDR. */
+ void (*print_address_func)
+ (bfd_vma addr, struct disassemble_info *info);
+
+ /* Function called to print an instruction. The function is architecture
+ * specific.
+ */
+ int (*print_insn)(bfd_vma addr, struct disassemble_info *info);
+
+ /* Function called to determine if there is a symbol at the given ADDR.
+ If there is, the function returns 1, otherwise it returns 0.
+ This is used by ports which support an overlay manager where
+ the overlay number is held in the top part of an address. In
+ some circumstances we want to include the overlay number in the
+ address, (normally because there is a symbol associated with
+ that address), but sometimes we want to mask out the overlay bits. */
+ int (* symbol_at_address_func)
+ (bfd_vma addr, struct disassemble_info * info);
+
+ /* These are for buffer_read_memory. */
+ bfd_byte *buffer;
+ bfd_vma buffer_vma;
+ int buffer_length;
+
+ /* This variable may be set by the instruction decoder. It suggests
+ the number of bytes objdump should display on a single line. If
+ the instruction decoder sets this, it should always set it to
+ the same value in order to get reasonable looking output. */
+ int bytes_per_line;
+
+ /* the next two variables control the way objdump displays the raw data */
+ /* For example, if bytes_per_line is 8 and bytes_per_chunk is 4, the */
+ /* output will look like this:
+ 00: 00000000 00000000
+ with the chunks displayed according to "display_endian". */
+ int bytes_per_chunk;
+ enum bfd_endian display_endian;
+
+ /* Results from instruction decoders. Not all decoders yet support
+ this information. This info is set each time an instruction is
+ decoded, and is only valid for the last such instruction.
+
+ To determine whether this decoder supports this information, set
+ insn_info_valid to 0, decode an instruction, then check it. */
+
+ char insn_info_valid; /* Branch info has been set. */
+ char branch_delay_insns; /* How many sequential insn's will run before
+ a branch takes effect. (0 = normal) */
+ char data_size; /* Size of data reference in insn, in bytes */
+ enum dis_insn_type insn_type; /* Type of instruction */
+ bfd_vma target; /* Target address of branch or dref, if known;
+ zero if unknown. */
+ bfd_vma target2; /* Second target address for dref2 */
+
+ /* Command line options specific to the target disassembler. */
+ char * disassembler_options;
+
+} disassemble_info;
+
+\f
+/* Standard disassemblers. Disassemble one instruction at the given
+ target address. Return number of bytes processed. */
+typedef int (*disassembler_ftype) (bfd_vma, disassemble_info *);
+
+int print_insn_tci(bfd_vma, disassemble_info*);
+int print_insn_big_mips (bfd_vma, disassemble_info*);
+int print_insn_little_mips (bfd_vma, disassemble_info*);
+int print_insn_i386 (bfd_vma, disassemble_info*);
+int print_insn_m68k (bfd_vma, disassemble_info*);
+int print_insn_z8001 (bfd_vma, disassemble_info*);
+int print_insn_z8002 (bfd_vma, disassemble_info*);
+int print_insn_h8300 (bfd_vma, disassemble_info*);
+int print_insn_h8300h (bfd_vma, disassemble_info*);
+int print_insn_h8300s (bfd_vma, disassemble_info*);
+int print_insn_h8500 (bfd_vma, disassemble_info*);
+int print_insn_arm_a64 (bfd_vma, disassemble_info*);
+int print_insn_alpha (bfd_vma, disassemble_info*);
+disassembler_ftype arc_get_disassembler (int, int);
+int print_insn_arm (bfd_vma, disassemble_info*);
+int print_insn_sparc (bfd_vma, disassemble_info*);
+int print_insn_big_a29k (bfd_vma, disassemble_info*);
+int print_insn_little_a29k (bfd_vma, disassemble_info*);
+int print_insn_i960 (bfd_vma, disassemble_info*);
+int print_insn_sh (bfd_vma, disassemble_info*);
+int print_insn_shl (bfd_vma, disassemble_info*);
+int print_insn_hppa (bfd_vma, disassemble_info*);
+int print_insn_m32r (bfd_vma, disassemble_info*);
+int print_insn_m88k (bfd_vma, disassemble_info*);
+int print_insn_mn10200 (bfd_vma, disassemble_info*);
+int print_insn_mn10300 (bfd_vma, disassemble_info*);
+int print_insn_moxie (bfd_vma, disassemble_info*);
+int print_insn_ns32k (bfd_vma, disassemble_info*);
+int print_insn_big_powerpc (bfd_vma, disassemble_info*);
+int print_insn_little_powerpc (bfd_vma, disassemble_info*);
+int print_insn_rs6000 (bfd_vma, disassemble_info*);
+int print_insn_w65 (bfd_vma, disassemble_info*);
+int print_insn_d10v (bfd_vma, disassemble_info*);
+int print_insn_v850 (bfd_vma, disassemble_info*);
+int print_insn_tic30 (bfd_vma, disassemble_info*);
+int print_insn_ppc (bfd_vma, disassemble_info*);
+int print_insn_s390 (bfd_vma, disassemble_info*);
+int print_insn_crisv32 (bfd_vma, disassemble_info*);
+int print_insn_crisv10 (bfd_vma, disassemble_info*);
+int print_insn_microblaze (bfd_vma, disassemble_info*);
+int print_insn_ia64 (bfd_vma, disassemble_info*);
+int print_insn_lm32 (bfd_vma, disassemble_info*);
+
+#if 0
+/* Fetch the disassembler for a given BFD, if that support is available. */
+disassembler_ftype disassembler(bfd *);
+#endif
+
+\f
+/* This block of definitions is for particular callers who read instructions
+ into a buffer before calling the instruction decoder. */
+
+/* Here is a function which callers may wish to use for read_memory_func.
+ It gets bytes from a buffer. */
+int buffer_read_memory(bfd_vma, bfd_byte *, int, struct disassemble_info *);
+
+/* This function goes with buffer_read_memory.
+ It prints a message using info->fprintf_func and info->stream. */
+void perror_memory(int, bfd_vma, struct disassemble_info *);
+
+
+/* Just print the address in hex. This is included for completeness even
+ though both GDB and objdump provide their own (to print symbolic
+ addresses). */
+void generic_print_address(bfd_vma, struct disassemble_info *);
+
+/* Always true. */
+int generic_symbol_at_address(bfd_vma, struct disassemble_info *);
+
+/* Macro to initialize a disassemble_info struct. This should be called
+ by all applications creating such a struct. */
+#define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \
+ (INFO).flavour = bfd_target_unknown_flavour, \
+ (INFO).arch = bfd_arch_unknown, \
+ (INFO).mach = 0, \
+ (INFO).endian = BFD_ENDIAN_UNKNOWN, \
+ INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC)
+
+/* Call this macro to initialize only the internal variables for the
+ disassembler. Architecture dependent things such as byte order, or machine
+ variant are not touched by this macro. This makes things much easier for
+ GDB which must initialize these things separately. */
+
+#define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
+ (INFO).fprintf_func = (FPRINTF_FUNC), \
+ (INFO).stream = (STREAM), \
+ (INFO).symbols = NULL, \
+ (INFO).num_symbols = 0, \
+ (INFO).private_data = NULL, \
+ (INFO).buffer = NULL, \
+ (INFO).buffer_vma = 0, \
+ (INFO).buffer_length = 0, \
+ (INFO).read_memory_func = buffer_read_memory, \
+ (INFO).memory_error_func = perror_memory, \
+ (INFO).print_address_func = generic_print_address, \
+ (INFO).print_insn = NULL, \
+ (INFO).symbol_at_address_func = generic_symbol_at_address, \
+ (INFO).flags = 0, \
+ (INFO).bytes_per_line = 0, \
+ (INFO).bytes_per_chunk = 0, \
+ (INFO).display_endian = BFD_ENDIAN_UNKNOWN, \
+ (INFO).disassembler_options = NULL, \
+ (INFO).insn_info_valid = 0
+
+#define _(x) x
+#define ATTRIBUTE_UNUSED __attribute__((unused))
+
+/* from libbfd */
+
+bfd_vma bfd_getl64 (const bfd_byte *addr);
+bfd_vma bfd_getl32 (const bfd_byte *addr);
+bfd_vma bfd_getb32 (const bfd_byte *addr);
+bfd_vma bfd_getl16 (const bfd_byte *addr);
+bfd_vma bfd_getb16 (const bfd_byte *addr);
+typedef bool bfd_boolean;
+
+#endif /* ! defined (DIS_ASM_H) */
Code Review / kvmfornfv.git / blobdiff