* Copyright (c) 2011 NICTA Pty Ltd
* Originally written by Hans Jiang
* Updated by Peter Chubb
- * Updated by Jean-Christophe Dubois
+ * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
*
* This code is licensed under GPL version 2 or later. See
* the COPYING file in the top-level directory.
*
*/
-#include "hw/hw.h"
-#include "qemu/bitops.h"
-#include "qemu/timer.h"
-#include "hw/ptimer.h"
-#include "hw/sysbus.h"
-#include "hw/arm/imx.h"
+#include "qemu/osdep.h"
+#include "hw/timer/imx_gpt.h"
+#include "hw/misc/imx_ccm.h"
#include "qemu/main-loop.h"
-#define TYPE_IMX_GPT "imx.gpt"
+#ifndef DEBUG_IMX_GPT
+#define DEBUG_IMX_GPT 0
+#endif
-/*
- * Define to 1 for debug messages
- */
-#define DEBUG_TIMER 0
-#if DEBUG_TIMER
+#define DPRINTF(fmt, args...) \
+ do { \
+ if (DEBUG_IMX_GPT) { \
+ fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_GPT, \
+ __func__, ##args); \
+ } \
+ } while (0)
static char const *imx_gpt_reg_name(uint32_t reg)
{
}
}
-# define DPRINTF(fmt, args...) \
- do { printf("%s: " fmt , __func__, ##args); } while (0)
-#else
-# define DPRINTF(fmt, args...) do {} while (0)
-#endif
-
-/*
- * Define to 1 for messages about attempts to
- * access unimplemented registers or similar.
- */
-#define DEBUG_IMPLEMENTATION 1
-#if DEBUG_IMPLEMENTATION
-# define IPRINTF(fmt, args...) \
- do { fprintf(stderr, "%s: " fmt, __func__, ##args); } while (0)
-#else
-# define IPRINTF(fmt, args...) do {} while (0)
-#endif
-
-#define IMX_GPT(obj) \
- OBJECT_CHECK(IMXGPTState, (obj), TYPE_IMX_GPT)
-/*
- * GPT : General purpose timer
- *
- * This timer counts up continuously while it is enabled, resetting itself
- * to 0 when it reaches GPT_TIMER_MAX (in freerun mode) or when it
- * reaches the value of one of the ocrX (in periodic mode).
- */
-
-#define GPT_TIMER_MAX 0XFFFFFFFFUL
-
-/* Control register. Not all of these bits have any effect (yet) */
-#define GPT_CR_EN (1 << 0) /* GPT Enable */
-#define GPT_CR_ENMOD (1 << 1) /* GPT Enable Mode */
-#define GPT_CR_DBGEN (1 << 2) /* GPT Debug mode enable */
-#define GPT_CR_WAITEN (1 << 3) /* GPT Wait Mode Enable */
-#define GPT_CR_DOZEN (1 << 4) /* GPT Doze mode enable */
-#define GPT_CR_STOPEN (1 << 5) /* GPT Stop Mode Enable */
-#define GPT_CR_CLKSRC_SHIFT (6)
-#define GPT_CR_CLKSRC_MASK (0x7)
-
-#define GPT_CR_FRR (1 << 9) /* Freerun or Restart */
-#define GPT_CR_SWR (1 << 15) /* Software Reset */
-#define GPT_CR_IM1 (3 << 16) /* Input capture channel 1 mode (2 bits) */
-#define GPT_CR_IM2 (3 << 18) /* Input capture channel 2 mode (2 bits) */
-#define GPT_CR_OM1 (7 << 20) /* Output Compare Channel 1 Mode (3 bits) */
-#define GPT_CR_OM2 (7 << 23) /* Output Compare Channel 2 Mode (3 bits) */
-#define GPT_CR_OM3 (7 << 26) /* Output Compare Channel 3 Mode (3 bits) */
-#define GPT_CR_FO1 (1 << 29) /* Force Output Compare Channel 1 */
-#define GPT_CR_FO2 (1 << 30) /* Force Output Compare Channel 2 */
-#define GPT_CR_FO3 (1 << 31) /* Force Output Compare Channel 3 */
-
-#define GPT_SR_OF1 (1 << 0)
-#define GPT_SR_OF2 (1 << 1)
-#define GPT_SR_OF3 (1 << 2)
-#define GPT_SR_ROV (1 << 5)
-
-#define GPT_IR_OF1IE (1 << 0)
-#define GPT_IR_OF2IE (1 << 1)
-#define GPT_IR_OF3IE (1 << 2)
-#define GPT_IR_ROVIE (1 << 5)
-
-typedef struct {
- SysBusDevice busdev;
- ptimer_state *timer;
- MemoryRegion iomem;
- DeviceState *ccm;
-
- uint32_t cr;
- uint32_t pr;
- uint32_t sr;
- uint32_t ir;
- uint32_t ocr1;
- uint32_t ocr2;
- uint32_t ocr3;
- uint32_t icr1;
- uint32_t icr2;
- uint32_t cnt;
-
- uint32_t next_timeout;
- uint32_t next_int;
-
- uint32_t freq;
-
- qemu_irq irq;
-} IMXGPTState;
-
static const VMStateDescription vmstate_imx_timer_gpt = {
- .name = "imx.gpt",
+ .name = TYPE_IMX_GPT,
.version_id = 3,
.minimum_version_id = 3,
.fields = (VMStateField[]) {
};
static const IMXClk imx_gpt_clocks[] = {
- NOCLK, /* 000 No clock source */
- IPG, /* 001 ipg_clk, 532MHz*/
- IPG, /* 010 ipg_clk_highfreq */
- NOCLK, /* 011 not defined */
- CLK_32k, /* 100 ipg_clk_32k */
- NOCLK, /* 101 not defined */
- NOCLK, /* 110 not defined */
- NOCLK, /* 111 not defined */
+ CLK_NONE, /* 000 No clock source */
+ CLK_IPG, /* 001 ipg_clk, 532MHz*/
+ CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */
+ CLK_NONE, /* 011 not defined */
+ CLK_32k, /* 100 ipg_clk_32k */
+ CLK_NONE, /* 101 not defined */
+ CLK_NONE, /* 110 not defined */
+ CLK_NONE, /* 111 not defined */
};
static void imx_gpt_set_freq(IMXGPTState *s)
{
uint32_t clksrc = extract32(s->cr, GPT_CR_CLKSRC_SHIFT, 3);
- uint32_t freq = imx_clock_frequency(s->ccm, imx_gpt_clocks[clksrc])
- / (1 + s->pr);
- s->freq = freq;
- DPRINTF("Setting clksrc %d to frequency %d\n", clksrc, freq);
+ s->freq = imx_ccm_get_clock_frequency(s->ccm,
+ imx_gpt_clocks[clksrc]) / (1 + s->pr);
+
+ DPRINTF("Setting clksrc %d to frequency %d\n", clksrc, s->freq);
- if (freq) {
- ptimer_set_freq(s->timer, freq);
+ if (s->freq) {
+ ptimer_set_freq(s->timer, s->freq);
}
}
}
static inline uint32_t imx_gpt_find_limit(uint32_t count, uint32_t reg,
- uint32_t timeout)
+ uint32_t timeout)
{
if ((count < reg) && (timeout > reg)) {
timeout = reg;
static void imx_gpt_compute_next_timeout(IMXGPTState *s, bool event)
{
uint32_t timeout = GPT_TIMER_MAX;
- uint32_t count = 0;
+ uint32_t count;
long long limit;
if (!(s->cr & GPT_CR_EN)) {
return;
}
- if (event) {
- /* This is a timer event */
+ /* update the count */
+ count = imx_gpt_update_count(s);
- if ((s->cr & GPT_CR_FRR) && (s->next_timeout != GPT_TIMER_MAX)) {
- /*
- * if we are in free running mode and we have not reached
- * the GPT_TIMER_MAX limit, then update the count
+ if (event) {
+ /*
+ * This is an event (the ptimer reached 0 and stopped), and the
+ * timer counter is now equal to s->next_timeout.
+ */
+ if (!(s->cr & GPT_CR_FRR) && (count == s->ocr1)) {
+ /* We are in restart mode and we crossed the compare channel 1
+ * value. We need to reset the counter to 0.
*/
- count = imx_gpt_update_count(s);
+ count = s->cnt = s->next_timeout = 0;
+ } else if (count == GPT_TIMER_MAX) {
+ /* We reached GPT_TIMER_MAX so we need to rollover */
+ count = s->cnt = s->next_timeout = 0;
}
- } else {
- /* not a timer event, then just update the count */
-
- count = imx_gpt_update_count(s);
}
/* now, find the next timeout related to count */
{
IMXGPTState *s = IMX_GPT(opaque);
uint32_t reg_value = 0;
- uint32_t reg = offset >> 2;
- switch (reg) {
+ switch (offset >> 2) {
case 0: /* Control Register */
reg_value = s->cr;
break;
break;
case 7: /* input Capture Register 1 */
- qemu_log_mask(LOG_UNIMP, "icr1 feature is not implemented\n");
+ qemu_log_mask(LOG_UNIMP, "[%s]%s: icr1 feature is not implemented\n",
+ TYPE_IMX_GPT, __func__);
reg_value = s->icr1;
break;
case 8: /* input Capture Register 2 */
- qemu_log_mask(LOG_UNIMP, "icr2 feature is not implemented\n");
+ qemu_log_mask(LOG_UNIMP, "[%s]%s: icr2 feature is not implemented\n",
+ TYPE_IMX_GPT, __func__);
reg_value = s->icr2;
break;
break;
default:
- IPRINTF("Bad offset %x\n", reg);
+ qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
+ HWADDR_PRIx "\n", TYPE_IMX_GPT, __func__, offset);
break;
}
- DPRINTF("(%s) = 0x%08x\n", imx_gpt_reg_name(reg), reg_value);
+ DPRINTF("(%s) = 0x%08x\n", imx_gpt_reg_name(offset >> 2), reg_value);
return reg_value;
}
{
IMXGPTState *s = IMX_GPT(opaque);
uint32_t oldreg;
- uint32_t reg = offset >> 2;
- DPRINTF("(%s, value = 0x%08x)\n", imx_gpt_reg_name(reg),
+ DPRINTF("(%s, value = 0x%08x)\n", imx_gpt_reg_name(offset >> 2),
(uint32_t)value);
- switch (reg) {
+ switch (offset >> 2) {
case 0:
oldreg = s->cr;
s->cr = value & ~0x7c14;
break;
default:
- IPRINTF("Bad offset %x\n", reg);
+ qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
+ HWADDR_PRIx "\n", TYPE_IMX_GPT, __func__, offset);
break;
}
}
s->timer = ptimer_init(bh);
}
-void imx_timerg_create(const hwaddr addr, qemu_irq irq, DeviceState *ccm)
-{
- IMXGPTState *pp;
- DeviceState *dev;
-
- dev = sysbus_create_simple(TYPE_IMX_GPT, addr, irq);
- pp = IMX_GPT(dev);
- pp->ccm = ccm;
-}
-
static void imx_gpt_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
Code Review / kvmfornfv.git / blobdiff