--- /dev/null
+/*
+ * Raspberry Pi emulation (c) 2012 Gregory Estrade
+ * This code is licensed under the GNU GPLv2 and later.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/misc/bcm2835_property.h"
+#include "hw/misc/bcm2835_mbox_defs.h"
+#include "sysemu/dma.h"
+
+/* https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface */
+
+static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
+{
+ uint32_t tag;
+ uint32_t bufsize;
+ uint32_t tot_len;
+ size_t resplen;
+ uint32_t tmp;
+ int n;
+ uint32_t offset, length, color;
+ uint32_t xres, yres, xoffset, yoffset, bpp, pixo, alpha;
+ uint32_t *newxres = NULL, *newyres = NULL, *newxoffset = NULL,
+ *newyoffset = NULL, *newbpp = NULL, *newpixo = NULL, *newalpha = NULL;
+
+ value &= ~0xf;
+
+ s->addr = value;
+
+ tot_len = ldl_le_phys(&s->dma_as, value);
+
+ /* @(addr + 4) : Buffer response code */
+ value = s->addr + 8;
+ while (value + 8 <= s->addr + tot_len) {
+ tag = ldl_le_phys(&s->dma_as, value);
+ bufsize = ldl_le_phys(&s->dma_as, value + 4);
+ /* @(value + 8) : Request/response indicator */
+ resplen = 0;
+ switch (tag) {
+ case 0x00000000: /* End tag */
+ break;
+ case 0x00000001: /* Get firmware revision */
+ stl_le_phys(&s->dma_as, value + 12, 346337);
+ resplen = 4;
+ break;
+ case 0x00010001: /* Get board model */
+ qemu_log_mask(LOG_UNIMP,
+ "bcm2835_property: %x get board model NYI\n", tag);
+ resplen = 4;
+ break;
+ case 0x00010002: /* Get board revision */
+ stl_le_phys(&s->dma_as, value + 12, s->board_rev);
+ resplen = 4;
+ break;
+ case 0x00010003: /* Get board MAC address */
+ resplen = sizeof(s->macaddr.a);
+ dma_memory_write(&s->dma_as, value + 12, s->macaddr.a, resplen);
+ break;
+ case 0x00010004: /* Get board serial */
+ qemu_log_mask(LOG_UNIMP,
+ "bcm2835_property: %x get board serial NYI\n", tag);
+ resplen = 8;
+ break;
+ case 0x00010005: /* Get ARM memory */
+ /* base */
+ stl_le_phys(&s->dma_as, value + 12, 0);
+ /* size */
+ stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_base);
+ resplen = 8;
+ break;
+ case 0x00010006: /* Get VC memory */
+ /* base */
+ stl_le_phys(&s->dma_as, value + 12, s->fbdev->vcram_base);
+ /* size */
+ stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_size);
+ resplen = 8;
+ break;
+ case 0x00028001: /* Set power state */
+ /* Assume that whatever device they asked for exists,
+ * and we'll just claim we set it to the desired state
+ */
+ tmp = ldl_le_phys(&s->dma_as, value + 16);
+ stl_le_phys(&s->dma_as, value + 16, (tmp & 1));
+ resplen = 8;
+ break;
+
+ /* Clocks */
+
+ case 0x00030001: /* Get clock state */
+ stl_le_phys(&s->dma_as, value + 16, 0x1);
+ resplen = 8;
+ break;
+
+ case 0x00038001: /* Set clock state */
+ qemu_log_mask(LOG_UNIMP,
+ "bcm2835_property: %x set clock state NYI\n", tag);
+ resplen = 8;
+ break;
+
+ case 0x00030002: /* Get clock rate */
+ case 0x00030004: /* Get max clock rate */
+ case 0x00030007: /* Get min clock rate */
+ switch (ldl_le_phys(&s->dma_as, value + 12)) {
+ case 1: /* EMMC */
+ stl_le_phys(&s->dma_as, value + 16, 50000000);
+ break;
+ case 2: /* UART */
+ stl_le_phys(&s->dma_as, value + 16, 3000000);
+ break;
+ default:
+ stl_le_phys(&s->dma_as, value + 16, 700000000);
+ break;
+ }
+ resplen = 8;
+ break;
+
+ case 0x00038002: /* Set clock rate */
+ case 0x00038004: /* Set max clock rate */
+ case 0x00038007: /* Set min clock rate */
+ qemu_log_mask(LOG_UNIMP,
+ "bcm2835_property: %x set clock rates NYI\n", tag);
+ resplen = 8;
+ break;
+
+ /* Temperature */
+
+ case 0x00030006: /* Get temperature */
+ stl_le_phys(&s->dma_as, value + 16, 25000);
+ resplen = 8;
+ break;
+
+ case 0x0003000A: /* Get max temperature */
+ stl_le_phys(&s->dma_as, value + 16, 99000);
+ resplen = 8;
+ break;
+
+ /* Frame buffer */
+
+ case 0x00040001: /* Allocate buffer */
+ stl_le_phys(&s->dma_as, value + 12, s->fbdev->base);
+ stl_le_phys(&s->dma_as, value + 16, s->fbdev->size);
+ resplen = 8;
+ break;
+ case 0x00048001: /* Release buffer */
+ resplen = 0;
+ break;
+ case 0x00040002: /* Blank screen */
+ resplen = 4;
+ break;
+ case 0x00040003: /* Get display width/height */
+ case 0x00040004:
+ stl_le_phys(&s->dma_as, value + 12, s->fbdev->xres);
+ stl_le_phys(&s->dma_as, value + 16, s->fbdev->yres);
+ resplen = 8;
+ break;
+ case 0x00044003: /* Test display width/height */
+ case 0x00044004:
+ resplen = 8;
+ break;
+ case 0x00048003: /* Set display width/height */
+ case 0x00048004:
+ xres = ldl_le_phys(&s->dma_as, value + 12);
+ newxres = &xres;
+ yres = ldl_le_phys(&s->dma_as, value + 16);
+ newyres = &yres;
+ resplen = 8;
+ break;
+ case 0x00040005: /* Get depth */
+ stl_le_phys(&s->dma_as, value + 12, s->fbdev->bpp);
+ resplen = 4;
+ break;
+ case 0x00044005: /* Test depth */
+ resplen = 4;
+ break;
+ case 0x00048005: /* Set depth */
+ bpp = ldl_le_phys(&s->dma_as, value + 12);
+ newbpp = &bpp;
+ resplen = 4;
+ break;
+ case 0x00040006: /* Get pixel order */
+ stl_le_phys(&s->dma_as, value + 12, s->fbdev->pixo);
+ resplen = 4;
+ break;
+ case 0x00044006: /* Test pixel order */
+ resplen = 4;
+ break;
+ case 0x00048006: /* Set pixel order */
+ pixo = ldl_le_phys(&s->dma_as, value + 12);
+ newpixo = &pixo;
+ resplen = 4;
+ break;
+ case 0x00040007: /* Get alpha */
+ stl_le_phys(&s->dma_as, value + 12, s->fbdev->alpha);
+ resplen = 4;
+ break;
+ case 0x00044007: /* Test pixel alpha */
+ resplen = 4;
+ break;
+ case 0x00048007: /* Set alpha */
+ alpha = ldl_le_phys(&s->dma_as, value + 12);
+ newalpha = α
+ resplen = 4;
+ break;
+ case 0x00040008: /* Get pitch */
+ stl_le_phys(&s->dma_as, value + 12, s->fbdev->pitch);
+ resplen = 4;
+ break;
+ case 0x00040009: /* Get virtual offset */
+ stl_le_phys(&s->dma_as, value + 12, s->fbdev->xoffset);
+ stl_le_phys(&s->dma_as, value + 16, s->fbdev->yoffset);
+ resplen = 8;
+ break;
+ case 0x00044009: /* Test virtual offset */
+ resplen = 8;
+ break;
+ case 0x00048009: /* Set virtual offset */
+ xoffset = ldl_le_phys(&s->dma_as, value + 12);
+ newxoffset = &xoffset;
+ yoffset = ldl_le_phys(&s->dma_as, value + 16);
+ newyoffset = &yoffset;
+ resplen = 8;
+ break;
+ case 0x0004000a: /* Get/Test/Set overscan */
+ case 0x0004400a:
+ case 0x0004800a:
+ stl_le_phys(&s->dma_as, value + 12, 0);
+ stl_le_phys(&s->dma_as, value + 16, 0);
+ stl_le_phys(&s->dma_as, value + 20, 0);
+ stl_le_phys(&s->dma_as, value + 24, 0);
+ resplen = 16;
+ break;
+ case 0x0004800b: /* Set palette */
+ offset = ldl_le_phys(&s->dma_as, value + 12);
+ length = ldl_le_phys(&s->dma_as, value + 16);
+ n = 0;
+ while (n < length - offset) {
+ color = ldl_le_phys(&s->dma_as, value + 20 + (n << 2));
+ stl_le_phys(&s->dma_as,
+ s->fbdev->vcram_base + ((offset + n) << 2), color);
+ n++;
+ }
+ stl_le_phys(&s->dma_as, value + 12, 0);
+ resplen = 4;
+ break;
+
+ case 0x00060001: /* Get DMA channels */
+ /* channels 2-5 */
+ stl_le_phys(&s->dma_as, value + 12, 0x003C);
+ resplen = 4;
+ break;
+
+ case 0x00050001: /* Get command line */
+ resplen = 0;
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "bcm2835_property: unhandled tag %08x\n", tag);
+ break;
+ }
+
+ if (tag == 0) {
+ break;
+ }
+
+ stl_le_phys(&s->dma_as, value + 8, (1 << 31) | resplen);
+ value += bufsize + 12;
+ }
+
+ /* Reconfigure framebuffer if required */
+ if (newxres || newyres || newxoffset || newyoffset || newbpp || newpixo
+ || newalpha) {
+ bcm2835_fb_reconfigure(s->fbdev, newxres, newyres, newxoffset,
+ newyoffset, newbpp, newpixo, newalpha);
+ }
+
+ /* Buffer response code */
+ stl_le_phys(&s->dma_as, s->addr + 4, (1 << 31));
+}
+
+static uint64_t bcm2835_property_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ BCM2835PropertyState *s = opaque;
+ uint32_t res = 0;
+
+ switch (offset) {
+ case MBOX_AS_DATA:
+ res = MBOX_CHAN_PROPERTY | s->addr;
+ s->pending = false;
+ qemu_set_irq(s->mbox_irq, 0);
+ break;
+
+ case MBOX_AS_PENDING:
+ res = s->pending;
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+ __func__, offset);
+ return 0;
+ }
+
+ return res;
+}
+
+static void bcm2835_property_write(void *opaque, hwaddr offset,
+ uint64_t value, unsigned size)
+{
+ BCM2835PropertyState *s = opaque;
+
+ switch (offset) {
+ case MBOX_AS_DATA:
+ /* bcm2835_mbox should check our pending status before pushing */
+ assert(!s->pending);
+ s->pending = true;
+ bcm2835_property_mbox_push(s, value);
+ qemu_set_irq(s->mbox_irq, 1);
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+ __func__, offset);
+ return;
+ }
+}
+
+static const MemoryRegionOps bcm2835_property_ops = {
+ .read = bcm2835_property_read,
+ .write = bcm2835_property_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid.min_access_size = 4,
+ .valid.max_access_size = 4,
+};
+
+static const VMStateDescription vmstate_bcm2835_property = {
+ .name = TYPE_BCM2835_PROPERTY,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_MACADDR(macaddr, BCM2835PropertyState),
+ VMSTATE_UINT32(addr, BCM2835PropertyState),
+ VMSTATE_BOOL(pending, BCM2835PropertyState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void bcm2835_property_init(Object *obj)
+{
+ BCM2835PropertyState *s = BCM2835_PROPERTY(obj);
+
+ memory_region_init_io(&s->iomem, OBJECT(s), &bcm2835_property_ops, s,
+ TYPE_BCM2835_PROPERTY, 0x10);
+ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
+ sysbus_init_irq(SYS_BUS_DEVICE(s), &s->mbox_irq);
+}
+
+static void bcm2835_property_reset(DeviceState *dev)
+{
+ BCM2835PropertyState *s = BCM2835_PROPERTY(dev);
+
+ s->pending = false;
+}
+
+static void bcm2835_property_realize(DeviceState *dev, Error **errp)
+{
+ BCM2835PropertyState *s = BCM2835_PROPERTY(dev);
+ Object *obj;
+ Error *err = NULL;
+
+ obj = object_property_get_link(OBJECT(dev), "fb", &err);
+ if (obj == NULL) {
+ error_setg(errp, "%s: required fb link not found: %s",
+ __func__, error_get_pretty(err));
+ return;
+ }
+
+ s->fbdev = BCM2835_FB(obj);
+
+ obj = object_property_get_link(OBJECT(dev), "dma-mr", &err);
+ if (obj == NULL) {
+ error_setg(errp, "%s: required dma-mr link not found: %s",
+ __func__, error_get_pretty(err));
+ return;
+ }
+
+ s->dma_mr = MEMORY_REGION(obj);
+ address_space_init(&s->dma_as, s->dma_mr, NULL);
+
+ /* TODO: connect to MAC address of USB NIC device, once we emulate it */
+ qemu_macaddr_default_if_unset(&s->macaddr);
+
+ bcm2835_property_reset(dev);
+}
+
+static Property bcm2835_property_props[] = {
+ DEFINE_PROP_UINT32("board-rev", BCM2835PropertyState, board_rev, 0),
+ DEFINE_PROP_END_OF_LIST()
+};
+
+static void bcm2835_property_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->props = bcm2835_property_props;
+ dc->realize = bcm2835_property_realize;
+ dc->vmsd = &vmstate_bcm2835_property;
+}
+
+static TypeInfo bcm2835_property_info = {
+ .name = TYPE_BCM2835_PROPERTY,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(BCM2835PropertyState),
+ .class_init = bcm2835_property_class_init,
+ .instance_init = bcm2835_property_init,
+};
+
+static void bcm2835_property_register_types(void)
+{
+ type_register_static(&bcm2835_property_info);
+}
+
+type_init(bcm2835_property_register_types)
Code Review / kvmfornfv.git / blobdiff