Add qemu 2.4.0
[kvmfornfv.git] / qemu / hw / ipack / tpci200.c
diff --git a/qemu/hw/ipack/tpci200.c b/qemu/hw/ipack/tpci200.c
new file mode 100644 (file)
index 0000000..1df02ee
--- /dev/null
@@ -0,0 +1,656 @@
+/*
+ * QEMU TEWS TPCI200 IndustryPack carrier emulation
+ *
+ * Copyright (C) 2012 Igalia, S.L.
+ * Author: Alberto Garcia <agarcia@igalia.com>
+ *
+ * This code is licensed under the GNU GPL v2 or (at your option) any
+ * later version.
+ */
+
+#include "hw/ipack/ipack.h"
+#include "hw/pci/pci.h"
+#include "qemu/bitops.h"
+#include <stdio.h>
+
+/* #define DEBUG_TPCI */
+
+#ifdef DEBUG_TPCI
+#define DPRINTF(fmt, ...) \
+    do { fprintf(stderr, "TPCI200: " fmt, ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) do { } while (0)
+#endif
+
+#define N_MODULES 4
+
+#define IP_ID_SPACE  2
+#define IP_INT_SPACE 3
+#define IP_IO_SPACE_ADDR_MASK  0x7F
+#define IP_ID_SPACE_ADDR_MASK  0x3F
+#define IP_INT_SPACE_ADDR_MASK 0x3F
+
+#define STATUS_INT(IP, INTNO) BIT((IP) * 2 + (INTNO))
+#define STATUS_TIME(IP)       BIT((IP) + 12)
+#define STATUS_ERR_ANY        0xF00
+
+#define CTRL_CLKRATE          BIT(0)
+#define CTRL_RECOVER          BIT(1)
+#define CTRL_TIME_INT         BIT(2)
+#define CTRL_ERR_INT          BIT(3)
+#define CTRL_INT_EDGE(INTNO)  BIT(4 + (INTNO))
+#define CTRL_INT(INTNO)       BIT(6 + (INTNO))
+
+#define REG_REV_ID    0x00
+#define REG_IP_A_CTRL 0x02
+#define REG_IP_B_CTRL 0x04
+#define REG_IP_C_CTRL 0x06
+#define REG_IP_D_CTRL 0x08
+#define REG_RESET     0x0A
+#define REG_STATUS    0x0C
+#define IP_N_FROM_REG(REG) ((REG) / 2 - 1)
+
+typedef struct {
+    PCIDevice dev;
+    IPackBus bus;
+    MemoryRegion mmio;
+    MemoryRegion io;
+    MemoryRegion las0;
+    MemoryRegion las1;
+    MemoryRegion las2;
+    MemoryRegion las3;
+    bool big_endian[3];
+    uint8_t ctrl[N_MODULES];
+    uint16_t status;
+    uint8_t int_set;
+} TPCI200State;
+
+#define TYPE_TPCI200 "tpci200"
+
+#define TPCI200(obj) \
+    OBJECT_CHECK(TPCI200State, (obj), TYPE_TPCI200)
+
+static const uint8_t local_config_regs[] = {
+    0x00, 0xFF, 0xFF, 0x0F, 0x00, 0xFC, 0xFF, 0x0F, 0x00, 0x00, 0x00,
+    0x0E, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
+    0x00, 0x08, 0x01, 0x00, 0x00, 0x04, 0x01, 0x00, 0x00, 0x00, 0x01,
+    0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0xA0, 0x60, 0x41, 0xD4,
+    0xA2, 0x20, 0x41, 0x14, 0xA2, 0x20, 0x41, 0x14, 0xA2, 0x20, 0x01,
+    0x14, 0x00, 0x00, 0x00, 0x00, 0x81, 0x00, 0x00, 0x08, 0x01, 0x02,
+    0x00, 0x04, 0x01, 0x00, 0x00, 0x01, 0x01, 0x00, 0x80, 0x02, 0x41,
+    0x00, 0x00, 0x00, 0x00, 0x40, 0x7A, 0x00, 0x52, 0x92, 0x24, 0x02
+};
+
+static void adjust_addr(bool big_endian, hwaddr *addr, unsigned size)
+{
+    /* During 8 bit access in big endian mode,
+       odd and even addresses are swapped */
+    if (big_endian && size == 1) {
+        *addr ^= 1;
+    }
+}
+
+static uint64_t adjust_value(bool big_endian, uint64_t *val, unsigned size)
+{
+    /* Local spaces only support 8/16 bit access,
+     * so there's no need to care for sizes > 2 */
+    if (big_endian && size == 2) {
+        *val = bswap16(*val);
+    }
+    return *val;
+}
+
+static void tpci200_set_irq(void *opaque, int intno, int level)
+{
+    IPackDevice *ip = opaque;
+    IPackBus *bus = IPACK_BUS(qdev_get_parent_bus(DEVICE(ip)));
+    PCIDevice *pcidev = PCI_DEVICE(BUS(bus)->parent);
+    TPCI200State *dev = TPCI200(pcidev);
+    unsigned ip_n = ip->slot;
+    uint16_t prev_status = dev->status;
+
+    assert(ip->slot >= 0 && ip->slot < N_MODULES);
+
+    /* The requested interrupt must be enabled in the IP CONTROL
+     * register */
+    if (!(dev->ctrl[ip_n] & CTRL_INT(intno))) {
+        return;
+    }
+
+    /* Update the interrupt status in the IP STATUS register */
+    if (level) {
+        dev->status |=  STATUS_INT(ip_n, intno);
+    } else {
+        dev->status &= ~STATUS_INT(ip_n, intno);
+    }
+
+    /* Return if there are no changes */
+    if (dev->status == prev_status) {
+        return;
+    }
+
+    DPRINTF("IP %u INT%u#: %u\n", ip_n, intno, level);
+
+    /* Check if the interrupt is edge sensitive */
+    if (dev->ctrl[ip_n] & CTRL_INT_EDGE(intno)) {
+        if (level) {
+            pci_set_irq(&dev->dev, !dev->int_set);
+            pci_set_irq(&dev->dev,  dev->int_set);
+        }
+    } else {
+        unsigned i, j;
+        uint16_t level_status = dev->status;
+
+        /* Check if there are any level sensitive interrupts set by
+           removing the ones that are edge sensitive from the status
+           register */
+        for (i = 0; i < N_MODULES; i++) {
+            for (j = 0; j < 2; j++) {
+                if (dev->ctrl[i] & CTRL_INT_EDGE(j)) {
+                    level_status &= ~STATUS_INT(i, j);
+                }
+            }
+        }
+
+        if (level_status && !dev->int_set) {
+            pci_irq_assert(&dev->dev);
+            dev->int_set = 1;
+        } else if (!level_status && dev->int_set) {
+            pci_irq_deassert(&dev->dev);
+            dev->int_set = 0;
+        }
+    }
+}
+
+static uint64_t tpci200_read_cfg(void *opaque, hwaddr addr, unsigned size)
+{
+    TPCI200State *s = opaque;
+    uint8_t ret = 0;
+    if (addr < ARRAY_SIZE(local_config_regs)) {
+        ret = local_config_regs[addr];
+    }
+    /* Endianness is stored in the first bit of these registers */
+    if ((addr == 0x2b && s->big_endian[0]) ||
+        (addr == 0x2f && s->big_endian[1]) ||
+        (addr == 0x33 && s->big_endian[2])) {
+        ret |= 1;
+    }
+    DPRINTF("Read from LCR 0x%x: 0x%x\n", (unsigned) addr, (unsigned) ret);
+    return ret;
+}
+
+static void tpci200_write_cfg(void *opaque, hwaddr addr, uint64_t val,
+                              unsigned size)
+{
+    TPCI200State *s = opaque;
+    /* Endianness is stored in the first bit of these registers */
+    if (addr == 0x2b || addr == 0x2f || addr == 0x33) {
+        unsigned las = (addr - 0x2b) / 4;
+        s->big_endian[las] = val & 1;
+        DPRINTF("LAS%u big endian mode: %u\n", las, (unsigned) val & 1);
+    } else {
+        DPRINTF("Write to LCR 0x%x: 0x%x\n", (unsigned) addr, (unsigned) val);
+    }
+}
+
+static uint64_t tpci200_read_las0(void *opaque, hwaddr addr, unsigned size)
+{
+    TPCI200State *s = opaque;
+    uint64_t ret = 0;
+
+    switch (addr) {
+
+    case REG_REV_ID:
+        DPRINTF("Read REVISION ID\n"); /* Current value is 0x00 */
+        break;
+
+    case REG_IP_A_CTRL:
+    case REG_IP_B_CTRL:
+    case REG_IP_C_CTRL:
+    case REG_IP_D_CTRL:
+        {
+            unsigned ip_n = IP_N_FROM_REG(addr);
+            ret = s->ctrl[ip_n];
+            DPRINTF("Read IP %c CONTROL: 0x%x\n", 'A' + ip_n, (unsigned) ret);
+        }
+        break;
+
+    case REG_RESET:
+        DPRINTF("Read RESET\n"); /* Not implemented */
+        break;
+
+    case REG_STATUS:
+        ret = s->status;
+        DPRINTF("Read STATUS: 0x%x\n", (unsigned) ret);
+        break;
+
+    /* Reserved */
+    default:
+        DPRINTF("Unsupported read from LAS0 0x%x\n", (unsigned) addr);
+        break;
+    }
+
+    return adjust_value(s->big_endian[0], &ret, size);
+}
+
+static void tpci200_write_las0(void *opaque, hwaddr addr, uint64_t val,
+                               unsigned size)
+{
+    TPCI200State *s = opaque;
+
+    adjust_value(s->big_endian[0], &val, size);
+
+    switch (addr) {
+
+    case REG_REV_ID:
+        DPRINTF("Write Revision ID: 0x%x\n", (unsigned) val); /* No effect */
+        break;
+
+    case REG_IP_A_CTRL:
+    case REG_IP_B_CTRL:
+    case REG_IP_C_CTRL:
+    case REG_IP_D_CTRL:
+        {
+            unsigned ip_n = IP_N_FROM_REG(addr);
+            s->ctrl[ip_n] = val;
+            DPRINTF("Write IP %c CONTROL: 0x%x\n", 'A' + ip_n, (unsigned) val);
+        }
+        break;
+
+    case REG_RESET:
+        DPRINTF("Write RESET: 0x%x\n", (unsigned) val); /* Not implemented */
+        break;
+
+    case REG_STATUS:
+        {
+            unsigned i;
+
+            for (i = 0; i < N_MODULES; i++) {
+                IPackDevice *ip = ipack_device_find(&s->bus, i);
+
+                if (ip != NULL) {
+                    if (val & STATUS_INT(i, 0)) {
+                        DPRINTF("Clear IP %c INT0# status\n", 'A' + i);
+                        qemu_irq_lower(ip->irq[0]);
+                    }
+                    if (val & STATUS_INT(i, 1)) {
+                        DPRINTF("Clear IP %c INT1# status\n", 'A' + i);
+                        qemu_irq_lower(ip->irq[1]);
+                    }
+                }
+
+                if (val & STATUS_TIME(i)) {
+                    DPRINTF("Clear IP %c timeout\n", 'A' + i);
+                    s->status &= ~STATUS_TIME(i);
+                }
+            }
+
+            if (val & STATUS_ERR_ANY) {
+                DPRINTF("Unexpected write to STATUS register: 0x%x\n",
+                        (unsigned) val);
+            }
+        }
+        break;
+
+    /* Reserved */
+    default:
+        DPRINTF("Unsupported write to LAS0 0x%x: 0x%x\n",
+                (unsigned) addr, (unsigned) val);
+        break;
+    }
+}
+
+static uint64_t tpci200_read_las1(void *opaque, hwaddr addr, unsigned size)
+{
+    TPCI200State *s = opaque;
+    IPackDevice *ip;
+    uint64_t ret = 0;
+    unsigned ip_n, space;
+    uint8_t offset;
+
+    adjust_addr(s->big_endian[1], &addr, size);
+
+    /*
+     * The address is divided into the IP module number (0-4), the IP
+     * address space (I/O, ID, INT) and the offset within that space.
+     */
+    ip_n = addr >> 8;
+    space = (addr >> 6) & 3;
+    ip = ipack_device_find(&s->bus, ip_n);
+
+    if (ip == NULL) {
+        DPRINTF("Read LAS1: IP module %u not installed\n", ip_n);
+    } else {
+        IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
+        switch (space) {
+
+        case IP_ID_SPACE:
+            offset = addr & IP_ID_SPACE_ADDR_MASK;
+            if (k->id_read) {
+                ret = k->id_read(ip, offset);
+            }
+            break;
+
+        case IP_INT_SPACE:
+            offset = addr & IP_INT_SPACE_ADDR_MASK;
+
+            /* Read address 0 to ACK IP INT0# and address 2 to ACK IP INT1# */
+            if (offset == 0 || offset == 2) {
+                unsigned intno = offset / 2;
+                bool int_set = s->status & STATUS_INT(ip_n, intno);
+                bool int_edge_sensitive = s->ctrl[ip_n] & CTRL_INT_EDGE(intno);
+                if (int_set && !int_edge_sensitive) {
+                    qemu_irq_lower(ip->irq[intno]);
+                }
+            }
+
+            if (k->int_read) {
+                ret = k->int_read(ip, offset);
+            }
+            break;
+
+        default:
+            offset = addr & IP_IO_SPACE_ADDR_MASK;
+            if (k->io_read) {
+                ret = k->io_read(ip, offset);
+            }
+            break;
+        }
+    }
+
+    return adjust_value(s->big_endian[1], &ret, size);
+}
+
+static void tpci200_write_las1(void *opaque, hwaddr addr, uint64_t val,
+                               unsigned size)
+{
+    TPCI200State *s = opaque;
+    IPackDevice *ip;
+    unsigned ip_n, space;
+    uint8_t offset;
+
+    adjust_addr(s->big_endian[1], &addr, size);
+    adjust_value(s->big_endian[1], &val, size);
+
+    /*
+     * The address is divided into the IP module number, the IP
+     * address space (I/O, ID, INT) and the offset within that space.
+     */
+    ip_n = addr >> 8;
+    space = (addr >> 6) & 3;
+    ip = ipack_device_find(&s->bus, ip_n);
+
+    if (ip == NULL) {
+        DPRINTF("Write LAS1: IP module %u not installed\n", ip_n);
+    } else {
+        IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
+        switch (space) {
+
+        case IP_ID_SPACE:
+            offset = addr & IP_ID_SPACE_ADDR_MASK;
+            if (k->id_write) {
+                k->id_write(ip, offset, val);
+            }
+            break;
+
+        case IP_INT_SPACE:
+            offset = addr & IP_INT_SPACE_ADDR_MASK;
+            if (k->int_write) {
+                k->int_write(ip, offset, val);
+            }
+            break;
+
+        default:
+            offset = addr & IP_IO_SPACE_ADDR_MASK;
+            if (k->io_write) {
+                k->io_write(ip, offset, val);
+            }
+            break;
+        }
+    }
+}
+
+static uint64_t tpci200_read_las2(void *opaque, hwaddr addr, unsigned size)
+{
+    TPCI200State *s = opaque;
+    IPackDevice *ip;
+    uint64_t ret = 0;
+    unsigned ip_n;
+    uint32_t offset;
+
+    adjust_addr(s->big_endian[2], &addr, size);
+
+    /*
+     * The address is divided into the IP module number and the offset
+     * within the IP module MEM space.
+     */
+    ip_n = addr >> 23;
+    offset = addr & 0x7fffff;
+    ip = ipack_device_find(&s->bus, ip_n);
+
+    if (ip == NULL) {
+        DPRINTF("Read LAS2: IP module %u not installed\n", ip_n);
+    } else {
+        IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
+        if (k->mem_read16) {
+            ret = k->mem_read16(ip, offset);
+        }
+    }
+
+    return adjust_value(s->big_endian[2], &ret, size);
+}
+
+static void tpci200_write_las2(void *opaque, hwaddr addr, uint64_t val,
+                               unsigned size)
+{
+    TPCI200State *s = opaque;
+    IPackDevice *ip;
+    unsigned ip_n;
+    uint32_t offset;
+
+    adjust_addr(s->big_endian[2], &addr, size);
+    adjust_value(s->big_endian[2], &val, size);
+
+    /*
+     * The address is divided into the IP module number and the offset
+     * within the IP module MEM space.
+     */
+    ip_n = addr >> 23;
+    offset = addr & 0x7fffff;
+    ip = ipack_device_find(&s->bus, ip_n);
+
+    if (ip == NULL) {
+        DPRINTF("Write LAS2: IP module %u not installed\n", ip_n);
+    } else {
+        IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
+        if (k->mem_write16) {
+            k->mem_write16(ip, offset, val);
+        }
+    }
+}
+
+static uint64_t tpci200_read_las3(void *opaque, hwaddr addr, unsigned size)
+{
+    TPCI200State *s = opaque;
+    IPackDevice *ip;
+    uint64_t ret = 0;
+    /*
+     * The address is divided into the IP module number and the offset
+     * within the IP module MEM space.
+     */
+    unsigned ip_n = addr >> 22;
+    uint32_t offset = addr & 0x3fffff;
+
+    ip = ipack_device_find(&s->bus, ip_n);
+
+    if (ip == NULL) {
+        DPRINTF("Read LAS3: IP module %u not installed\n", ip_n);
+    } else {
+        IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
+        if (k->mem_read8) {
+            ret = k->mem_read8(ip, offset);
+        }
+    }
+
+    return ret;
+}
+
+static void tpci200_write_las3(void *opaque, hwaddr addr, uint64_t val,
+                               unsigned size)
+{
+    TPCI200State *s = opaque;
+    IPackDevice *ip;
+    /*
+     * The address is divided into the IP module number and the offset
+     * within the IP module MEM space.
+     */
+    unsigned ip_n = addr >> 22;
+    uint32_t offset = addr & 0x3fffff;
+
+    ip = ipack_device_find(&s->bus, ip_n);
+
+    if (ip == NULL) {
+        DPRINTF("Write LAS3: IP module %u not installed\n", ip_n);
+    } else {
+        IPackDeviceClass *k = IPACK_DEVICE_GET_CLASS(ip);
+        if (k->mem_write8) {
+            k->mem_write8(ip, offset, val);
+        }
+    }
+}
+
+static const MemoryRegionOps tpci200_cfg_ops = {
+    .read = tpci200_read_cfg,
+    .write = tpci200_write_cfg,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid =  {
+        .min_access_size = 1,
+        .max_access_size = 4
+    },
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 1
+    }
+};
+
+static const MemoryRegionOps tpci200_las0_ops = {
+    .read = tpci200_read_las0,
+    .write = tpci200_write_las0,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid =  {
+        .min_access_size = 2,
+        .max_access_size = 2
+    }
+};
+
+static const MemoryRegionOps tpci200_las1_ops = {
+    .read = tpci200_read_las1,
+    .write = tpci200_write_las1,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid =  {
+        .min_access_size = 1,
+        .max_access_size = 2
+    }
+};
+
+static const MemoryRegionOps tpci200_las2_ops = {
+    .read = tpci200_read_las2,
+    .write = tpci200_write_las2,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid =  {
+        .min_access_size = 1,
+        .max_access_size = 2
+    }
+};
+
+static const MemoryRegionOps tpci200_las3_ops = {
+    .read = tpci200_read_las3,
+    .write = tpci200_write_las3,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid =  {
+        .min_access_size = 1,
+        .max_access_size = 1
+    }
+};
+
+static void tpci200_realize(PCIDevice *pci_dev, Error **errp)
+{
+    TPCI200State *s = TPCI200(pci_dev);
+    uint8_t *c = s->dev.config;
+
+    pci_set_word(c + PCI_COMMAND, 0x0003);
+    pci_set_word(c + PCI_STATUS,  0x0280);
+
+    pci_set_byte(c + PCI_INTERRUPT_PIN, 0x01); /* Interrupt pin A */
+
+    pci_set_byte(c + PCI_CAPABILITY_LIST, 0x40);
+    pci_set_long(c + 0x40, 0x48014801);
+    pci_set_long(c + 0x48, 0x00024C06);
+    pci_set_long(c + 0x4C, 0x00000003);
+
+    memory_region_init_io(&s->mmio, OBJECT(s), &tpci200_cfg_ops,
+                          s, "tpci200_mmio", 128);
+    memory_region_init_io(&s->io, OBJECT(s),   &tpci200_cfg_ops,
+                          s, "tpci200_io",   128);
+    memory_region_init_io(&s->las0, OBJECT(s), &tpci200_las0_ops,
+                          s, "tpci200_las0", 256);
+    memory_region_init_io(&s->las1, OBJECT(s), &tpci200_las1_ops,
+                          s, "tpci200_las1", 1024);
+    memory_region_init_io(&s->las2, OBJECT(s), &tpci200_las2_ops,
+                          s, "tpci200_las2", 1024*1024*32);
+    memory_region_init_io(&s->las3, OBJECT(s), &tpci200_las3_ops,
+                          s, "tpci200_las3", 1024*1024*16);
+    pci_register_bar(&s->dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mmio);
+    pci_register_bar(&s->dev, 1, PCI_BASE_ADDRESS_SPACE_IO,     &s->io);
+    pci_register_bar(&s->dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->las0);
+    pci_register_bar(&s->dev, 3, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->las1);
+    pci_register_bar(&s->dev, 4, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->las2);
+    pci_register_bar(&s->dev, 5, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->las3);
+
+    ipack_bus_new_inplace(&s->bus, sizeof(s->bus), DEVICE(pci_dev), NULL,
+                          N_MODULES, tpci200_set_irq);
+}
+
+static const VMStateDescription vmstate_tpci200 = {
+    .name = "tpci200",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_PCI_DEVICE(dev, TPCI200State),
+        VMSTATE_BOOL_ARRAY(big_endian, TPCI200State, 3),
+        VMSTATE_UINT8_ARRAY(ctrl, TPCI200State, N_MODULES),
+        VMSTATE_UINT16(status, TPCI200State),
+        VMSTATE_UINT8(int_set, TPCI200State),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void tpci200_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->realize = tpci200_realize;
+    k->vendor_id = PCI_VENDOR_ID_TEWS;
+    k->device_id = PCI_DEVICE_ID_TEWS_TPCI200;
+    k->class_id = PCI_CLASS_BRIDGE_OTHER;
+    k->subsystem_vendor_id = PCI_VENDOR_ID_TEWS;
+    k->subsystem_id = 0x300A;
+    set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
+    dc->desc = "TEWS TPCI200 IndustryPack carrier";
+    dc->vmsd = &vmstate_tpci200;
+}
+
+static const TypeInfo tpci200_info = {
+    .name          = TYPE_TPCI200,
+    .parent        = TYPE_PCI_DEVICE,
+    .instance_size = sizeof(TPCI200State),
+    .class_init    = tpci200_class_init,
+};
+
+static void tpci200_register_types(void)
+{
+    type_register_static(&tpci200_info);
+}
+
+type_init(tpci200_register_types)