* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
+#include "qemu/osdep.h"
+#include "qapi/error.h"
#include "gic_internal.h"
+#include "hw/arm/linux-boot-if.h"
static void gic_pre_save(void *opaque)
{
static const VMStateDescription vmstate_gic = {
.name = "arm_gic",
- .version_id = 10,
- .minimum_version_id = 10,
+ .version_id = 12,
+ .minimum_version_id = 12,
.pre_save = gic_pre_save,
.post_load = gic_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT8_ARRAY(irq_target, GICState, GIC_MAXIRQ),
VMSTATE_UINT8_2DARRAY(priority1, GICState, GIC_INTERNAL, GIC_NCPU),
VMSTATE_UINT8_ARRAY(priority2, GICState, GIC_MAXIRQ - GIC_INTERNAL),
- VMSTATE_UINT16_2DARRAY(last_active, GICState, GIC_MAXIRQ, GIC_NCPU),
VMSTATE_UINT8_2DARRAY(sgi_pending, GICState, GIC_NR_SGIS, GIC_NCPU),
VMSTATE_UINT16_ARRAY(priority_mask, GICState, GIC_NCPU),
- VMSTATE_UINT16_ARRAY(running_irq, GICState, GIC_NCPU),
VMSTATE_UINT16_ARRAY(running_priority, GICState, GIC_NCPU),
VMSTATE_UINT16_ARRAY(current_pending, GICState, GIC_NCPU),
VMSTATE_UINT8_ARRAY(bpr, GICState, GIC_NCPU),
VMSTATE_UINT8_ARRAY(abpr, GICState, GIC_NCPU),
VMSTATE_UINT32_2DARRAY(apr, GICState, GIC_NR_APRS, GIC_NCPU),
+ VMSTATE_UINT32_2DARRAY(nsapr, GICState, GIC_NR_APRS, GIC_NCPU),
VMSTATE_END_OF_LIST()
}
};
+void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler,
+ const MemoryRegionOps *ops)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(s);
+ int i = s->num_irq - GIC_INTERNAL;
+
+ /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
+ * GPIO array layout is thus:
+ * [0..N-1] SPIs
+ * [N..N+31] PPIs for CPU 0
+ * [N+32..N+63] PPIs for CPU 1
+ * ...
+ */
+ if (s->revision != REV_NVIC) {
+ i += (GIC_INTERNAL * s->num_cpu);
+ }
+ qdev_init_gpio_in(DEVICE(s), handler, i);
+
+ for (i = 0; i < s->num_cpu; i++) {
+ sysbus_init_irq(sbd, &s->parent_irq[i]);
+ }
+ for (i = 0; i < s->num_cpu; i++) {
+ sysbus_init_irq(sbd, &s->parent_fiq[i]);
+ }
+
+ /* Distributor */
+ memory_region_init_io(&s->iomem, OBJECT(s), ops, s, "gic_dist", 0x1000);
+ sysbus_init_mmio(sbd, &s->iomem);
+
+ if (s->revision != REV_NVIC) {
+ /* This is the main CPU interface "for this core". It is always
+ * present because it is required by both software emulation and KVM.
+ * NVIC is not handled here because its CPU interface is different,
+ * neither it can use KVM.
+ */
+ memory_region_init_io(&s->cpuiomem[0], OBJECT(s), ops ? &ops[1] : NULL,
+ s, "gic_cpu", s->revision == 2 ? 0x2000 : 0x100);
+ sysbus_init_mmio(sbd, &s->cpuiomem[0]);
+ }
+}
+
static void arm_gic_common_realize(DeviceState *dev, Error **errp)
{
GICState *s = ARM_GIC_COMMON(dev);
{
GICState *s = ARM_GIC_COMMON(dev);
int i, j;
+ int resetprio;
+
+ /* If we're resetting a TZ-aware GIC as if secure firmware
+ * had set it up ready to start a kernel in non-secure,
+ * we need to set interrupt priorities to a "zero for the
+ * NS view" value. This is particularly critical for the
+ * priority_mask[] values, because if they are zero then NS
+ * code cannot ever rewrite the priority to anything else.
+ */
+ if (s->security_extn && s->irq_reset_nonsecure) {
+ resetprio = 0x80;
+ } else {
+ resetprio = 0;
+ }
+
memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
for (i = 0 ; i < s->num_cpu; i++) {
if (s->revision == REV_11MPCORE) {
s->priority_mask[i] = 0xf0;
} else {
- s->priority_mask[i] = 0;
+ s->priority_mask[i] = resetprio;
}
s->current_pending[i] = 1023;
- s->running_irq[i] = 1023;
s->running_priority[i] = 0x100;
s->cpu_ctlr[i] = 0;
s->bpr[i] = GIC_MIN_BPR;
s->abpr[i] = GIC_MIN_ABPR;
for (j = 0; j < GIC_INTERNAL; j++) {
- s->priority1[j][i] = 0;
+ s->priority1[j][i] = resetprio;
}
for (j = 0; j < GIC_NR_SGIS; j++) {
s->sgi_pending[j][i] = 0;
}
for (i = 0; i < ARRAY_SIZE(s->priority2); i++) {
- s->priority2[i] = 0;
+ s->priority2[i] = resetprio;
}
for (i = 0; i < GIC_MAXIRQ; i++) {
s->irq_target[i] = 0;
}
}
+ if (s->security_extn && s->irq_reset_nonsecure) {
+ for (i = 0; i < GIC_MAXIRQ; i++) {
+ GIC_SET_GROUP(i, ALL_CPU_MASK);
+ }
+ }
+
s->ctlr = 0;
}
+static void arm_gic_common_linux_init(ARMLinuxBootIf *obj,
+ bool secure_boot)
+{
+ GICState *s = ARM_GIC_COMMON(obj);
+
+ if (s->security_extn && !secure_boot) {
+ /* We're directly booting a kernel into NonSecure. If this GIC
+ * implements the security extensions then we must configure it
+ * to have all the interrupts be NonSecure (this is a job that
+ * is done by the Secure boot firmware in real hardware, and in
+ * this mode QEMU is acting as a minimalist firmware-and-bootloader
+ * equivalent).
+ */
+ s->irq_reset_nonsecure = true;
+ }
+}
+
static Property arm_gic_common_properties[] = {
DEFINE_PROP_UINT32("num-cpu", GICState, num_cpu, 1),
DEFINE_PROP_UINT32("num-irq", GICState, num_irq, 32),
static void arm_gic_common_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
+ ARMLinuxBootIfClass *albifc = ARM_LINUX_BOOT_IF_CLASS(klass);
dc->reset = arm_gic_common_reset;
dc->realize = arm_gic_common_realize;
dc->props = arm_gic_common_properties;
dc->vmsd = &vmstate_gic;
+ albifc->arm_linux_init = arm_gic_common_linux_init;
}
static const TypeInfo arm_gic_common_type = {
.class_size = sizeof(ARMGICCommonClass),
.class_init = arm_gic_common_class_init,
.abstract = true,
+ .interfaces = (InterfaceInfo []) {
+ { TYPE_ARM_LINUX_BOOT_IF },
+ { },
+ },
};
static void register_types(void)
Code Review / kvmfornfv.git / blobdiff