These changes are the raw update to qemu-2.6.

[kvmfornfv.git] / qemu / hw / gpio / pl061.c

diff --git a/qemu/hw/gpio/pl061.c b/qemu/hw/gpio/pl061.c
index 4ba730b..29dc7fc 100644 (file)
--- a/qemu/hw/gpio/pl061.c
+++ b/qemu/hw/gpio/pl061.c
@@ -8,6 +8,7 @@
  * This code is licensed under the GPL.
  */
 
+#include "qemu/osdep.h"
 #include "hw/sysbus.h"
 
 //#define DEBUG_PL061 1
@@ -55,17 +56,17 @@ typedef struct PL061State {
     uint32_t slr;
     uint32_t den;
     uint32_t cr;
-    uint32_t float_high;
     uint32_t amsel;
     qemu_irq irq;
     qemu_irq out[8];
     const unsigned char *id;
+    uint32_t rsvd_start; /* reserved area: [rsvd_start, 0xfcc] */
 } PL061State;
 
 static const VMStateDescription vmstate_pl061 = {
     .name = "pl061",
-    .version_id = 3,
-    .minimum_version_id = 3,
+    .version_id = 4,
+    .minimum_version_id = 4,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(locked, PL061State),
         VMSTATE_UINT32(data, PL061State),
@@ -87,7 +88,6 @@ static const VMStateDescription vmstate_pl061 = {
         VMSTATE_UINT32(slr, PL061State),
         VMSTATE_UINT32(den, PL061State),
         VMSTATE_UINT32(cr, PL061State),
-        VMSTATE_UINT32(float_high, PL061State),
         VMSTATE_UINT32_V(amsel, PL061State, 2),
         VMSTATE_END_OF_LIST()
     }
@@ -153,12 +153,15 @@ static uint64_t pl061_read(void *opaque, hwaddr offset,
 {
     PL061State *s = (PL061State *)opaque;
 
-    if (offset >= 0xfd0 && offset < 0x1000) {
-        return s->id[(offset - 0xfd0) >> 2];
-    }
     if (offset < 0x400) {
         return s->data & (offset >> 2);
     }
+    if (offset >= s->rsvd_start && offset <= 0xfcc) {
+        goto err_out;
+    }
+    if (offset >= 0xfd0 && offset < 0x1000) {
+        return s->id[(offset - 0xfd0) >> 2];
+    }
     switch (offset) {
     case 0x400: /* Direction */
         return s->dir;
@@ -199,10 +202,12 @@ static uint64_t pl061_read(void *opaque, hwaddr offset,
     case 0x528: /* Analog mode select */
         return s->amsel;
     default:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "pl061_read: Bad offset %x\n", (int)offset);
-        return 0;
+        break;
     }
+err_out:
+    qemu_log_mask(LOG_GUEST_ERROR,
+                  "pl061_read: Bad offset %x\n", (int)offset);
+    return 0;
 }
 
 static void pl061_write(void *opaque, hwaddr offset,
@@ -217,6 +222,9 @@ static void pl061_write(void *opaque, hwaddr offset,
         pl061_update(s);
         return;
     }
+    if (offset >= s->rsvd_start) {
+        goto err_out;
+    }
     switch (offset) {
     case 0x400: /* Direction */
         s->dir = value & 0xff;
@@ -275,16 +283,41 @@ static void pl061_write(void *opaque, hwaddr offset,
         s->amsel = value & 0xff;
         break;
     default:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "pl061_write: Bad offset %x\n", (int)offset);
+        goto err_out;
     }
     pl061_update(s);
+    return;
+err_out:
+    qemu_log_mask(LOG_GUEST_ERROR,
+                  "pl061_write: Bad offset %x\n", (int)offset);
 }
 
-static void pl061_reset(PL061State *s)
+static void pl061_reset(DeviceState *dev)
 {
-  s->locked = 1;
-  s->cr = 0xff;
+    PL061State *s = PL061(dev);
+
+    /* reset values from PL061 TRM, Stellaris LM3S5P31 & LM3S8962 Data Sheet */
+    s->data = 0;
+    s->old_out_data = 0;
+    s->old_in_data = 0;
+    s->dir = 0;
+    s->isense = 0;
+    s->ibe = 0;
+    s->iev = 0;
+    s->im = 0;
+    s->istate = 0;
+    s->afsel = 0;
+    s->dr2r = 0xff;
+    s->dr4r = 0;
+    s->dr8r = 0;
+    s->odr = 0;
+    s->pur = 0;
+    s->pdr = 0;
+    s->slr = 0;
+    s->den = 0;
+    s->locked = 1;
+    s->cr = 0xff;
+    s->amsel = 0;
 }
 
 static void pl061_set_irq(void * opaque, int irq, int level)
@@ -317,7 +350,7 @@ static int pl061_initfn(SysBusDevice *sbd)
     sysbus_init_irq(sbd, &s->irq);
     qdev_init_gpio_in(dev, pl061_set_irq, 8);
     qdev_init_gpio_out(dev, s->out, 8);
-    pl061_reset(s);
+
     return 0;
 }
 
@@ -326,6 +359,7 @@ static void pl061_luminary_init(Object *obj)
     PL061State *s = PL061(obj);
 
     s->id = pl061_id_luminary;
+    s->rsvd_start = 0x52c;
 }
 
 static void pl061_init(Object *obj)
@@ -333,6 +367,7 @@ static void pl061_init(Object *obj)
     PL061State *s = PL061(obj);
 
     s->id = pl061_id;
+    s->rsvd_start = 0x424;
 }
 
 static void pl061_class_init(ObjectClass *klass, void *data)
@@ -342,6 +377,7 @@ static void pl061_class_init(ObjectClass *klass, void *data)
 
     k->init = pl061_initfn;
     dc->vmsd = &vmstate_pl061;
+    dc->reset = &pl061_reset;
 }
 
 static const TypeInfo pl061_info = {