--- /dev/null
+/*
+ * TI OMAP processors GPIO emulation.
+ *
+ * Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org>
+ * Copyright (C) 2007-2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hw/hw.h"
+#include "hw/arm/omap.h"
+#include "hw/sysbus.h"
+
+struct omap_gpio_s {
+ qemu_irq irq;
+ qemu_irq handler[16];
+
+ uint16_t inputs;
+ uint16_t outputs;
+ uint16_t dir;
+ uint16_t edge;
+ uint16_t mask;
+ uint16_t ints;
+ uint16_t pins;
+};
+
+#define TYPE_OMAP1_GPIO "omap-gpio"
+#define OMAP1_GPIO(obj) \
+ OBJECT_CHECK(struct omap_gpif_s, (obj), TYPE_OMAP1_GPIO)
+
+struct omap_gpif_s {
+ SysBusDevice parent_obj;
+
+ MemoryRegion iomem;
+ int mpu_model;
+ void *clk;
+ struct omap_gpio_s omap1;
+};
+
+/* General-Purpose I/O of OMAP1 */
+static void omap_gpio_set(void *opaque, int line, int level)
+{
+ struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1;
+ uint16_t prev = s->inputs;
+
+ if (level)
+ s->inputs |= 1 << line;
+ else
+ s->inputs &= ~(1 << line);
+
+ if (((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) &
+ (1 << line) & s->dir & ~s->mask) {
+ s->ints |= 1 << line;
+ qemu_irq_raise(s->irq);
+ }
+}
+
+static uint64_t omap_gpio_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ struct omap_gpio_s *s = (struct omap_gpio_s *) opaque;
+ int offset = addr & OMAP_MPUI_REG_MASK;
+
+ if (size != 2) {
+ return omap_badwidth_read16(opaque, addr);
+ }
+
+ switch (offset) {
+ case 0x00: /* DATA_INPUT */
+ return s->inputs & s->pins;
+
+ case 0x04: /* DATA_OUTPUT */
+ return s->outputs;
+
+ case 0x08: /* DIRECTION_CONTROL */
+ return s->dir;
+
+ case 0x0c: /* INTERRUPT_CONTROL */
+ return s->edge;
+
+ case 0x10: /* INTERRUPT_MASK */
+ return s->mask;
+
+ case 0x14: /* INTERRUPT_STATUS */
+ return s->ints;
+
+ case 0x18: /* PIN_CONTROL (not in OMAP310) */
+ OMAP_BAD_REG(addr);
+ return s->pins;
+ }
+
+ OMAP_BAD_REG(addr);
+ return 0;
+}
+
+static void omap_gpio_write(void *opaque, hwaddr addr,
+ uint64_t value, unsigned size)
+{
+ struct omap_gpio_s *s = (struct omap_gpio_s *) opaque;
+ int offset = addr & OMAP_MPUI_REG_MASK;
+ uint16_t diff;
+ int ln;
+
+ if (size != 2) {
+ omap_badwidth_write16(opaque, addr, value);
+ return;
+ }
+
+ switch (offset) {
+ case 0x00: /* DATA_INPUT */
+ OMAP_RO_REG(addr);
+ return;
+
+ case 0x04: /* DATA_OUTPUT */
+ diff = (s->outputs ^ value) & ~s->dir;
+ s->outputs = value;
+ while ((ln = ctz32(diff)) != 32) {
+ if (s->handler[ln])
+ qemu_set_irq(s->handler[ln], (value >> ln) & 1);
+ diff &= ~(1 << ln);
+ }
+ break;
+
+ case 0x08: /* DIRECTION_CONTROL */
+ diff = s->outputs & (s->dir ^ value);
+ s->dir = value;
+
+ value = s->outputs & ~s->dir;
+ while ((ln = ctz32(diff)) != 32) {
+ if (s->handler[ln])
+ qemu_set_irq(s->handler[ln], (value >> ln) & 1);
+ diff &= ~(1 << ln);
+ }
+ break;
+
+ case 0x0c: /* INTERRUPT_CONTROL */
+ s->edge = value;
+ break;
+
+ case 0x10: /* INTERRUPT_MASK */
+ s->mask = value;
+ break;
+
+ case 0x14: /* INTERRUPT_STATUS */
+ s->ints &= ~value;
+ if (!s->ints)
+ qemu_irq_lower(s->irq);
+ break;
+
+ case 0x18: /* PIN_CONTROL (not in OMAP310 TRM) */
+ OMAP_BAD_REG(addr);
+ s->pins = value;
+ break;
+
+ default:
+ OMAP_BAD_REG(addr);
+ return;
+ }
+}
+
+/* *Some* sources say the memory region is 32-bit. */
+static const MemoryRegionOps omap_gpio_ops = {
+ .read = omap_gpio_read,
+ .write = omap_gpio_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void omap_gpio_reset(struct omap_gpio_s *s)
+{
+ s->inputs = 0;
+ s->outputs = ~0;
+ s->dir = ~0;
+ s->edge = ~0;
+ s->mask = ~0;
+ s->ints = 0;
+ s->pins = ~0;
+}
+
+struct omap2_gpio_s {
+ qemu_irq irq[2];
+ qemu_irq wkup;
+ qemu_irq *handler;
+ MemoryRegion iomem;
+
+ uint8_t revision;
+ uint8_t config[2];
+ uint32_t inputs;
+ uint32_t outputs;
+ uint32_t dir;
+ uint32_t level[2];
+ uint32_t edge[2];
+ uint32_t mask[2];
+ uint32_t wumask;
+ uint32_t ints[2];
+ uint32_t debounce;
+ uint8_t delay;
+};
+
+#define TYPE_OMAP2_GPIO "omap2-gpio"
+#define OMAP2_GPIO(obj) \
+ OBJECT_CHECK(struct omap2_gpif_s, (obj), TYPE_OMAP2_GPIO)
+
+struct omap2_gpif_s {
+ SysBusDevice parent_obj;
+
+ MemoryRegion iomem;
+ int mpu_model;
+ void *iclk;
+ void *fclk[6];
+ int modulecount;
+ struct omap2_gpio_s *modules;
+ qemu_irq *handler;
+ int autoidle;
+ int gpo;
+};
+
+/* General-Purpose Interface of OMAP2/3 */
+static inline void omap2_gpio_module_int_update(struct omap2_gpio_s *s,
+ int line)
+{
+ qemu_set_irq(s->irq[line], s->ints[line] & s->mask[line]);
+}
+
+static void omap2_gpio_module_wake(struct omap2_gpio_s *s, int line)
+{
+ if (!(s->config[0] & (1 << 2))) /* ENAWAKEUP */
+ return;
+ if (!(s->config[0] & (3 << 3))) /* Force Idle */
+ return;
+ if (!(s->wumask & (1 << line)))
+ return;
+
+ qemu_irq_raise(s->wkup);
+}
+
+static inline void omap2_gpio_module_out_update(struct omap2_gpio_s *s,
+ uint32_t diff)
+{
+ int ln;
+
+ s->outputs ^= diff;
+ diff &= ~s->dir;
+ while ((ln = ctz32(diff)) != 32) {
+ qemu_set_irq(s->handler[ln], (s->outputs >> ln) & 1);
+ diff &= ~(1 << ln);
+ }
+}
+
+static void omap2_gpio_module_level_update(struct omap2_gpio_s *s, int line)
+{
+ s->ints[line] |= s->dir &
+ ((s->inputs & s->level[1]) | (~s->inputs & s->level[0]));
+ omap2_gpio_module_int_update(s, line);
+}
+
+static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line)
+{
+ s->ints[0] |= 1 << line;
+ omap2_gpio_module_int_update(s, 0);
+ s->ints[1] |= 1 << line;
+ omap2_gpio_module_int_update(s, 1);
+ omap2_gpio_module_wake(s, line);
+}
+
+static void omap2_gpio_set(void *opaque, int line, int level)
+{
+ struct omap2_gpif_s *p = opaque;
+ struct omap2_gpio_s *s = &p->modules[line >> 5];
+
+ line &= 31;
+ if (level) {
+ if (s->dir & (1 << line) & ((~s->inputs & s->edge[0]) | s->level[1]))
+ omap2_gpio_module_int(s, line);
+ s->inputs |= 1 << line;
+ } else {
+ if (s->dir & (1 << line) & ((s->inputs & s->edge[1]) | s->level[0]))
+ omap2_gpio_module_int(s, line);
+ s->inputs &= ~(1 << line);
+ }
+}
+
+static void omap2_gpio_module_reset(struct omap2_gpio_s *s)
+{
+ s->config[0] = 0;
+ s->config[1] = 2;
+ s->ints[0] = 0;
+ s->ints[1] = 0;
+ s->mask[0] = 0;
+ s->mask[1] = 0;
+ s->wumask = 0;
+ s->dir = ~0;
+ s->level[0] = 0;
+ s->level[1] = 0;
+ s->edge[0] = 0;
+ s->edge[1] = 0;
+ s->debounce = 0;
+ s->delay = 0;
+}
+
+static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr)
+{
+ struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque;
+
+ switch (addr) {
+ case 0x00: /* GPIO_REVISION */
+ return s->revision;
+
+ case 0x10: /* GPIO_SYSCONFIG */
+ return s->config[0];
+
+ case 0x14: /* GPIO_SYSSTATUS */
+ return 0x01;
+
+ case 0x18: /* GPIO_IRQSTATUS1 */
+ return s->ints[0];
+
+ case 0x1c: /* GPIO_IRQENABLE1 */
+ case 0x60: /* GPIO_CLEARIRQENABLE1 */
+ case 0x64: /* GPIO_SETIRQENABLE1 */
+ return s->mask[0];
+
+ case 0x20: /* GPIO_WAKEUPENABLE */
+ case 0x80: /* GPIO_CLEARWKUENA */
+ case 0x84: /* GPIO_SETWKUENA */
+ return s->wumask;
+
+ case 0x28: /* GPIO_IRQSTATUS2 */
+ return s->ints[1];
+
+ case 0x2c: /* GPIO_IRQENABLE2 */
+ case 0x70: /* GPIO_CLEARIRQENABLE2 */
+ case 0x74: /* GPIO_SETIREQNEABLE2 */
+ return s->mask[1];
+
+ case 0x30: /* GPIO_CTRL */
+ return s->config[1];
+
+ case 0x34: /* GPIO_OE */
+ return s->dir;
+
+ case 0x38: /* GPIO_DATAIN */
+ return s->inputs;
+
+ case 0x3c: /* GPIO_DATAOUT */
+ case 0x90: /* GPIO_CLEARDATAOUT */
+ case 0x94: /* GPIO_SETDATAOUT */
+ return s->outputs;
+
+ case 0x40: /* GPIO_LEVELDETECT0 */
+ return s->level[0];
+
+ case 0x44: /* GPIO_LEVELDETECT1 */
+ return s->level[1];
+
+ case 0x48: /* GPIO_RISINGDETECT */
+ return s->edge[0];
+
+ case 0x4c: /* GPIO_FALLINGDETECT */
+ return s->edge[1];
+
+ case 0x50: /* GPIO_DEBOUNCENABLE */
+ return s->debounce;
+
+ case 0x54: /* GPIO_DEBOUNCINGTIME */
+ return s->delay;
+ }
+
+ OMAP_BAD_REG(addr);
+ return 0;
+}
+
+static void omap2_gpio_module_write(void *opaque, hwaddr addr,
+ uint32_t value)
+{
+ struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque;
+ uint32_t diff;
+ int ln;
+
+ switch (addr) {
+ case 0x00: /* GPIO_REVISION */
+ case 0x14: /* GPIO_SYSSTATUS */
+ case 0x38: /* GPIO_DATAIN */
+ OMAP_RO_REG(addr);
+ break;
+
+ case 0x10: /* GPIO_SYSCONFIG */
+ if (((value >> 3) & 3) == 3)
+ fprintf(stderr, "%s: bad IDLEMODE value\n", __FUNCTION__);
+ if (value & 2)
+ omap2_gpio_module_reset(s);
+ s->config[0] = value & 0x1d;
+ break;
+
+ case 0x18: /* GPIO_IRQSTATUS1 */
+ if (s->ints[0] & value) {
+ s->ints[0] &= ~value;
+ omap2_gpio_module_level_update(s, 0);
+ }
+ break;
+
+ case 0x1c: /* GPIO_IRQENABLE1 */
+ s->mask[0] = value;
+ omap2_gpio_module_int_update(s, 0);
+ break;
+
+ case 0x20: /* GPIO_WAKEUPENABLE */
+ s->wumask = value;
+ break;
+
+ case 0x28: /* GPIO_IRQSTATUS2 */
+ if (s->ints[1] & value) {
+ s->ints[1] &= ~value;
+ omap2_gpio_module_level_update(s, 1);
+ }
+ break;
+
+ case 0x2c: /* GPIO_IRQENABLE2 */
+ s->mask[1] = value;
+ omap2_gpio_module_int_update(s, 1);
+ break;
+
+ case 0x30: /* GPIO_CTRL */
+ s->config[1] = value & 7;
+ break;
+
+ case 0x34: /* GPIO_OE */
+ diff = s->outputs & (s->dir ^ value);
+ s->dir = value;
+
+ value = s->outputs & ~s->dir;
+ while ((ln = ctz32(diff)) != 32) {
+ diff &= ~(1 << ln);
+ qemu_set_irq(s->handler[ln], (value >> ln) & 1);
+ }
+
+ omap2_gpio_module_level_update(s, 0);
+ omap2_gpio_module_level_update(s, 1);
+ break;
+
+ case 0x3c: /* GPIO_DATAOUT */
+ omap2_gpio_module_out_update(s, s->outputs ^ value);
+ break;
+
+ case 0x40: /* GPIO_LEVELDETECT0 */
+ s->level[0] = value;
+ omap2_gpio_module_level_update(s, 0);
+ omap2_gpio_module_level_update(s, 1);
+ break;
+
+ case 0x44: /* GPIO_LEVELDETECT1 */
+ s->level[1] = value;
+ omap2_gpio_module_level_update(s, 0);
+ omap2_gpio_module_level_update(s, 1);
+ break;
+
+ case 0x48: /* GPIO_RISINGDETECT */
+ s->edge[0] = value;
+ break;
+
+ case 0x4c: /* GPIO_FALLINGDETECT */
+ s->edge[1] = value;
+ break;
+
+ case 0x50: /* GPIO_DEBOUNCENABLE */
+ s->debounce = value;
+ break;
+
+ case 0x54: /* GPIO_DEBOUNCINGTIME */
+ s->delay = value;
+ break;
+
+ case 0x60: /* GPIO_CLEARIRQENABLE1 */
+ s->mask[0] &= ~value;
+ omap2_gpio_module_int_update(s, 0);
+ break;
+
+ case 0x64: /* GPIO_SETIRQENABLE1 */
+ s->mask[0] |= value;
+ omap2_gpio_module_int_update(s, 0);
+ break;
+
+ case 0x70: /* GPIO_CLEARIRQENABLE2 */
+ s->mask[1] &= ~value;
+ omap2_gpio_module_int_update(s, 1);
+ break;
+
+ case 0x74: /* GPIO_SETIREQNEABLE2 */
+ s->mask[1] |= value;
+ omap2_gpio_module_int_update(s, 1);
+ break;
+
+ case 0x80: /* GPIO_CLEARWKUENA */
+ s->wumask &= ~value;
+ break;
+
+ case 0x84: /* GPIO_SETWKUENA */
+ s->wumask |= value;
+ break;
+
+ case 0x90: /* GPIO_CLEARDATAOUT */
+ omap2_gpio_module_out_update(s, s->outputs & value);
+ break;
+
+ case 0x94: /* GPIO_SETDATAOUT */
+ omap2_gpio_module_out_update(s, ~s->outputs & value);
+ break;
+
+ default:
+ OMAP_BAD_REG(addr);
+ return;
+ }
+}
+
+static uint32_t omap2_gpio_module_readp(void *opaque, hwaddr addr)
+{
+ return omap2_gpio_module_read(opaque, addr & ~3) >> ((addr & 3) << 3);
+}
+
+static void omap2_gpio_module_writep(void *opaque, hwaddr addr,
+ uint32_t value)
+{
+ uint32_t cur = 0;
+ uint32_t mask = 0xffff;
+
+ switch (addr & ~3) {
+ case 0x00: /* GPIO_REVISION */
+ case 0x14: /* GPIO_SYSSTATUS */
+ case 0x38: /* GPIO_DATAIN */
+ OMAP_RO_REG(addr);
+ break;
+
+ case 0x10: /* GPIO_SYSCONFIG */
+ case 0x1c: /* GPIO_IRQENABLE1 */
+ case 0x20: /* GPIO_WAKEUPENABLE */
+ case 0x2c: /* GPIO_IRQENABLE2 */
+ case 0x30: /* GPIO_CTRL */
+ case 0x34: /* GPIO_OE */
+ case 0x3c: /* GPIO_DATAOUT */
+ case 0x40: /* GPIO_LEVELDETECT0 */
+ case 0x44: /* GPIO_LEVELDETECT1 */
+ case 0x48: /* GPIO_RISINGDETECT */
+ case 0x4c: /* GPIO_FALLINGDETECT */
+ case 0x50: /* GPIO_DEBOUNCENABLE */
+ case 0x54: /* GPIO_DEBOUNCINGTIME */
+ cur = omap2_gpio_module_read(opaque, addr & ~3) &
+ ~(mask << ((addr & 3) << 3));
+
+ /* Fall through. */
+ case 0x18: /* GPIO_IRQSTATUS1 */
+ case 0x28: /* GPIO_IRQSTATUS2 */
+ case 0x60: /* GPIO_CLEARIRQENABLE1 */
+ case 0x64: /* GPIO_SETIRQENABLE1 */
+ case 0x70: /* GPIO_CLEARIRQENABLE2 */
+ case 0x74: /* GPIO_SETIREQNEABLE2 */
+ case 0x80: /* GPIO_CLEARWKUENA */
+ case 0x84: /* GPIO_SETWKUENA */
+ case 0x90: /* GPIO_CLEARDATAOUT */
+ case 0x94: /* GPIO_SETDATAOUT */
+ value <<= (addr & 3) << 3;
+ omap2_gpio_module_write(opaque, addr, cur | value);
+ break;
+
+ default:
+ OMAP_BAD_REG(addr);
+ return;
+ }
+}
+
+static const MemoryRegionOps omap2_gpio_module_ops = {
+ .old_mmio = {
+ .read = {
+ omap2_gpio_module_readp,
+ omap2_gpio_module_readp,
+ omap2_gpio_module_read,
+ },
+ .write = {
+ omap2_gpio_module_writep,
+ omap2_gpio_module_writep,
+ omap2_gpio_module_write,
+ },
+ },
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void omap_gpif_reset(DeviceState *dev)
+{
+ struct omap_gpif_s *s = OMAP1_GPIO(dev);
+
+ omap_gpio_reset(&s->omap1);
+}
+
+static void omap2_gpif_reset(DeviceState *dev)
+{
+ struct omap2_gpif_s *s = OMAP2_GPIO(dev);
+ int i;
+
+ for (i = 0; i < s->modulecount; i++) {
+ omap2_gpio_module_reset(&s->modules[i]);
+ }
+ s->autoidle = 0;
+ s->gpo = 0;
+}
+
+static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque;
+
+ switch (addr) {
+ case 0x00: /* IPGENERICOCPSPL_REVISION */
+ return 0x18;
+
+ case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */
+ return s->autoidle;
+
+ case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */
+ return 0x01;
+
+ case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */
+ return 0x00;
+
+ case 0x40: /* IPGENERICOCPSPL_GPO */
+ return s->gpo;
+
+ case 0x50: /* IPGENERICOCPSPL_GPI */
+ return 0x00;
+ }
+
+ OMAP_BAD_REG(addr);
+ return 0;
+}
+
+static void omap2_gpif_top_write(void *opaque, hwaddr addr,
+ uint64_t value, unsigned size)
+{
+ struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque;
+
+ switch (addr) {
+ case 0x00: /* IPGENERICOCPSPL_REVISION */
+ case 0x14: /* IPGENERICOCPSPL_SYSSTATUS */
+ case 0x18: /* IPGENERICOCPSPL_IRQSTATUS */
+ case 0x50: /* IPGENERICOCPSPL_GPI */
+ OMAP_RO_REG(addr);
+ break;
+
+ case 0x10: /* IPGENERICOCPSPL_SYSCONFIG */
+ if (value & (1 << 1)) /* SOFTRESET */
+ omap2_gpif_reset(DEVICE(s));
+ s->autoidle = value & 1;
+ break;
+
+ case 0x40: /* IPGENERICOCPSPL_GPO */
+ s->gpo = value & 1;
+ break;
+
+ default:
+ OMAP_BAD_REG(addr);
+ return;
+ }
+}
+
+static const MemoryRegionOps omap2_gpif_top_ops = {
+ .read = omap2_gpif_top_read,
+ .write = omap2_gpif_top_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int omap_gpio_init(SysBusDevice *sbd)
+{
+ DeviceState *dev = DEVICE(sbd);
+ struct omap_gpif_s *s = OMAP1_GPIO(dev);
+
+ if (!s->clk) {
+ hw_error("omap-gpio: clk not connected\n");
+ }
+ qdev_init_gpio_in(dev, omap_gpio_set, 16);
+ qdev_init_gpio_out(dev, s->omap1.handler, 16);
+ sysbus_init_irq(sbd, &s->omap1.irq);
+ memory_region_init_io(&s->iomem, OBJECT(s), &omap_gpio_ops, &s->omap1,
+ "omap.gpio", 0x1000);
+ sysbus_init_mmio(sbd, &s->iomem);
+ return 0;
+}
+
+static int omap2_gpio_init(SysBusDevice *sbd)
+{
+ DeviceState *dev = DEVICE(sbd);
+ struct omap2_gpif_s *s = OMAP2_GPIO(dev);
+ int i;
+
+ if (!s->iclk) {
+ hw_error("omap2-gpio: iclk not connected\n");
+ }
+ if (s->mpu_model < omap3430) {
+ s->modulecount = (s->mpu_model < omap2430) ? 4 : 5;
+ memory_region_init_io(&s->iomem, OBJECT(s), &omap2_gpif_top_ops, s,
+ "omap2.gpio", 0x1000);
+ sysbus_init_mmio(sbd, &s->iomem);
+ } else {
+ s->modulecount = 6;
+ }
+ s->modules = g_malloc0(s->modulecount * sizeof(struct omap2_gpio_s));
+ s->handler = g_malloc0(s->modulecount * 32 * sizeof(qemu_irq));
+ qdev_init_gpio_in(dev, omap2_gpio_set, s->modulecount * 32);
+ qdev_init_gpio_out(dev, s->handler, s->modulecount * 32);
+ for (i = 0; i < s->modulecount; i++) {
+ struct omap2_gpio_s *m = &s->modules[i];
+ if (!s->fclk[i]) {
+ hw_error("omap2-gpio: fclk%d not connected\n", i);
+ }
+ m->revision = (s->mpu_model < omap3430) ? 0x18 : 0x25;
+ m->handler = &s->handler[i * 32];
+ sysbus_init_irq(sbd, &m->irq[0]); /* mpu irq */
+ sysbus_init_irq(sbd, &m->irq[1]); /* dsp irq */
+ sysbus_init_irq(sbd, &m->wkup);
+ memory_region_init_io(&m->iomem, OBJECT(s), &omap2_gpio_module_ops, m,
+ "omap.gpio-module", 0x1000);
+ sysbus_init_mmio(sbd, &m->iomem);
+ }
+ return 0;
+}
+
+/* Using qdev pointer properties for the clocks is not ideal.
+ * qdev should support a generic means of defining a 'port' with
+ * an arbitrary interface for connecting two devices. Then we
+ * could reframe the omap clock API in terms of clock ports,
+ * and get some type safety. For now the best qdev provides is
+ * passing an arbitrary pointer.
+ * (It's not possible to pass in the string which is the clock
+ * name, because this device does not have the necessary information
+ * (ie the struct omap_mpu_state_s*) to do the clockname to pointer
+ * translation.)
+ */
+
+static Property omap_gpio_properties[] = {
+ DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0),
+ DEFINE_PROP_PTR("clk", struct omap_gpif_s, clk),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void omap_gpio_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+ k->init = omap_gpio_init;
+ dc->reset = omap_gpif_reset;
+ dc->props = omap_gpio_properties;
+ /* Reason: pointer property "clk" */
+ dc->cannot_instantiate_with_device_add_yet = true;
+}
+
+static const TypeInfo omap_gpio_info = {
+ .name = TYPE_OMAP1_GPIO,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(struct omap_gpif_s),
+ .class_init = omap_gpio_class_init,
+};
+
+static Property omap2_gpio_properties[] = {
+ DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0),
+ DEFINE_PROP_PTR("iclk", struct omap2_gpif_s, iclk),
+ DEFINE_PROP_PTR("fclk0", struct omap2_gpif_s, fclk[0]),
+ DEFINE_PROP_PTR("fclk1", struct omap2_gpif_s, fclk[1]),
+ DEFINE_PROP_PTR("fclk2", struct omap2_gpif_s, fclk[2]),
+ DEFINE_PROP_PTR("fclk3", struct omap2_gpif_s, fclk[3]),
+ DEFINE_PROP_PTR("fclk4", struct omap2_gpif_s, fclk[4]),
+ DEFINE_PROP_PTR("fclk5", struct omap2_gpif_s, fclk[5]),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void omap2_gpio_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+ k->init = omap2_gpio_init;
+ dc->reset = omap2_gpif_reset;
+ dc->props = omap2_gpio_properties;
+ /* Reason: pointer properties "iclk", "fclk0", ..., "fclk5" */
+ dc->cannot_instantiate_with_device_add_yet = true;
+}
+
+static const TypeInfo omap2_gpio_info = {
+ .name = TYPE_OMAP2_GPIO,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(struct omap2_gpif_s),
+ .class_init = omap2_gpio_class_init,
+};
+
+static void omap_gpio_register_types(void)
+{
+ type_register_static(&omap_gpio_info);
+ type_register_static(&omap2_gpio_info);
+}
+
+type_init(omap_gpio_register_types)
Code Review / kvmfornfv.git / blobdiff