* Copyright (c) 2008 OKL
* Originally Written by Hans Jiang
* Copyright (c) 2011 NICTA Pty Ltd.
+ * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
* is a real serial device.
*/
-#include "hw/hw.h"
-#include "hw/sysbus.h"
+#include "qemu/osdep.h"
+#include "hw/char/imx_serial.h"
#include "sysemu/sysemu.h"
#include "sysemu/char.h"
-#include "hw/arm/imx.h"
-//#define DEBUG_SERIAL 1
-#ifdef DEBUG_SERIAL
-#define DPRINTF(fmt, args...) \
-do { printf("imx_serial: " fmt , ##args); } while (0)
-#else
-#define DPRINTF(fmt, args...) do {} while (0)
-#endif
-
-/*
- * Define to 1 for messages about attempts to
- * access unimplemented registers or similar.
- */
-//#define DEBUG_IMPLEMENTATION 1
-#ifdef DEBUG_IMPLEMENTATION
-# define IPRINTF(fmt, args...) \
- do { fprintf(stderr, "imx_serial: " fmt, ##args); } while (0)
-#else
-# define IPRINTF(fmt, args...) do {} while (0)
+#ifndef DEBUG_IMX_UART
+#define DEBUG_IMX_UART 0
#endif
-#define TYPE_IMX_SERIAL "imx-serial"
-#define IMX_SERIAL(obj) OBJECT_CHECK(IMXSerialState, (obj), TYPE_IMX_SERIAL)
-
-typedef struct IMXSerialState {
- SysBusDevice parent_obj;
-
- MemoryRegion iomem;
- int32_t readbuff;
-
- uint32_t usr1;
- uint32_t usr2;
- uint32_t ucr1;
- uint32_t ucr2;
- uint32_t uts1;
-
- /*
- * The registers below are implemented just so that the
- * guest OS sees what it has written
- */
- uint32_t onems;
- uint32_t ufcr;
- uint32_t ubmr;
- uint32_t ubrc;
- uint32_t ucr3;
-
- qemu_irq irq;
- CharDriverState *chr;
-} IMXSerialState;
+#define DPRINTF(fmt, args...) \
+ do { \
+ if (DEBUG_IMX_UART) { \
+ fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_SERIAL, \
+ __func__, ##args); \
+ } \
+ } while (0)
static const VMStateDescription vmstate_imx_serial = {
- .name = "imx-serial",
+ .name = TYPE_IMX_SERIAL,
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
},
};
-
-#define URXD_CHARRDY (1<<15) /* character read is valid */
-#define URXD_ERR (1<<14) /* Character has error */
-#define URXD_BRK (1<<11) /* Break received */
-
-#define USR1_PARTYER (1<<15) /* Parity Error */
-#define USR1_RTSS (1<<14) /* RTS pin status */
-#define USR1_TRDY (1<<13) /* Tx ready */
-#define USR1_RTSD (1<<12) /* RTS delta: pin changed state */
-#define USR1_ESCF (1<<11) /* Escape sequence interrupt */
-#define USR1_FRAMERR (1<<10) /* Framing error */
-#define USR1_RRDY (1<<9) /* receiver ready */
-#define USR1_AGTIM (1<<8) /* Aging timer interrupt */
-#define USR1_DTRD (1<<7) /* DTR changed */
-#define USR1_RXDS (1<<6) /* Receiver is idle */
-#define USR1_AIRINT (1<<5) /* Aysnch IR interrupt */
-#define USR1_AWAKE (1<<4) /* Falling edge detected on RXd pin */
-
-#define USR2_ADET (1<<15) /* Autobaud complete */
-#define USR2_TXFE (1<<14) /* Transmit FIFO empty */
-#define USR2_DTRF (1<<13) /* DTR/DSR transition */
-#define USR2_IDLE (1<<12) /* UART has been idle for too long */
-#define USR2_ACST (1<<11) /* Autobaud counter stopped */
-#define USR2_RIDELT (1<<10) /* Ring Indicator delta */
-#define USR2_RIIN (1<<9) /* Ring Indicator Input */
-#define USR2_IRINT (1<<8) /* Serial Infrared Interrupt */
-#define USR2_WAKE (1<<7) /* Start bit detected */
-#define USR2_DCDDELT (1<<6) /* Data Carrier Detect delta */
-#define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */
-#define USR2_RTSF (1<<4) /* RTS transition */
-#define USR2_TXDC (1<<3) /* Transmission complete */
-#define USR2_BRCD (1<<2) /* Break condition detected */
-#define USR2_ORE (1<<1) /* Overrun error */
-#define USR2_RDR (1<<0) /* Receive data ready */
-
-#define UCR1_TRDYEN (1<<13) /* Tx Ready Interrupt Enable */
-#define UCR1_RRDYEN (1<<9) /* Rx Ready Interrupt Enable */
-#define UCR1_TXMPTYEN (1<<6) /* Tx Empty Interrupt Enable */
-#define UCR1_UARTEN (1<<0) /* UART Enable */
-
-#define UCR2_TXEN (1<<2) /* Transmitter enable */
-#define UCR2_RXEN (1<<1) /* Receiver enable */
-#define UCR2_SRST (1<<0) /* Reset complete */
-
-#define UTS1_TXEMPTY (1<<6)
-#define UTS1_RXEMPTY (1<<5)
-#define UTS1_TXFULL (1<<4)
-#define UTS1_RXFULL (1<<3)
-
static void imx_update(IMXSerialState *s)
{
uint32_t flags;
flags = (s->usr1 & s->ucr1) & (USR1_TRDY|USR1_RRDY);
- if (!(s->ucr1 & UCR1_TXMPTYEN)) {
+ if (s->ucr1 & UCR1_TXMPTYEN) {
+ flags |= (s->uts1 & UTS1_TXEMPTY);
+ } else {
flags &= ~USR1_TRDY;
}
IMXSerialState *s = (IMXSerialState *)opaque;
uint32_t c;
- DPRINTF("read(offset=%x)\n", offset >> 2);
+ DPRINTF("read(offset=0x%" HWADDR_PRIx ")\n", offset);
+
switch (offset >> 2) {
case 0x0: /* URXD */
c = s->readbuff;
s->usr2 &= ~USR2_RDR;
s->uts1 |= UTS1_RXEMPTY;
imx_update(s);
- qemu_chr_accept_input(s->chr);
+ if (s->chr) {
+ qemu_chr_accept_input(s->chr);
+ }
}
return c;
return 0x0; /* TODO */
default:
- IPRINTF("imx_serial_read: bad offset: 0x%x\n", (int)offset);
+ qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
+ HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
return 0;
}
}
static void imx_serial_write(void *opaque, hwaddr offset,
- uint64_t value, unsigned size)
+ uint64_t value, unsigned size)
{
IMXSerialState *s = (IMXSerialState *)opaque;
unsigned char ch;
- DPRINTF("write(offset=%x, value = %x) to %s\n",
- offset >> 2,
- (unsigned int)value, s->chr ? s->chr->label : "NODEV");
+ DPRINTF("write(offset=0x%" HWADDR_PRIx ", value = 0x%x) to %s\n",
+ offset, (unsigned int)value, s->chr ? s->chr->label : "NODEV");
switch (offset >> 2) {
case 0x10: /* UTXD */
case 0x20: /* UCR1 */
s->ucr1 = value & 0xffff;
+
DPRINTF("write(ucr1=%x)\n", (unsigned int)value);
+
imx_update(s);
break;
}
if (value & UCR2_RXEN) {
if (!(s->ucr2 & UCR2_RXEN)) {
- qemu_chr_accept_input(s->chr);
+ if (s->chr) {
+ qemu_chr_accept_input(s->chr);
+ }
}
}
s->ucr2 = value & 0xffff;
case 0x25: /* USR1 */
value &= USR1_AWAKE | USR1_AIRINT | USR1_DTRD | USR1_AGTIM |
- USR1_FRAMERR | USR1_ESCF | USR1_RTSD | USR1_PARTYER;
+ USR1_FRAMERR | USR1_ESCF | USR1_RTSD | USR1_PARTYER;
s->usr1 &= ~value;
break;
case 0x26: /* USR2 */
- /*
- * Writing 1 to some bits clears them; all other
- * values are ignored
- */
+ /*
+ * Writing 1 to some bits clears them; all other
+ * values are ignored
+ */
value &= USR2_ADET | USR2_DTRF | USR2_IDLE | USR2_ACST |
- USR2_RIDELT | USR2_IRINT | USR2_WAKE |
- USR2_DCDDELT | USR2_RTSF | USR2_BRCD | USR2_ORE;
+ USR2_RIDELT | USR2_IRINT | USR2_WAKE |
+ USR2_DCDDELT | USR2_RTSF | USR2_BRCD | USR2_ORE;
s->usr2 &= ~value;
break;
- /*
- * Linux expects to see what it writes to these registers
- * We don't currently alter the baud rate
- */
+ /*
+ * Linux expects to see what it writes to these registers
+ * We don't currently alter the baud rate
+ */
case 0x29: /* UBIR */
s->ubrc = value & 0xffff;
break;
case 0x2d: /* UTS1 */
case 0x23: /* UCR4 */
- IPRINTF("Unimplemented Register %x written to\n", offset >> 2);
+ qemu_log_mask(LOG_UNIMP, "[%s]%s: Unimplemented reg 0x%"
+ HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
/* TODO */
break;
default:
- IPRINTF("imx_serial_write: Bad offset 0x%x\n", (int)offset);
+ qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
+ HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
}
}
static void imx_put_data(void *opaque, uint32_t value)
{
IMXSerialState *s = (IMXSerialState *)opaque;
+
DPRINTF("received char\n");
+
s->usr1 |= USR1_RRDY;
s->usr2 |= USR2_RDR;
s->uts1 &= ~UTS1_RXEMPTY;
.endianness = DEVICE_NATIVE_ENDIAN,
};
-static int imx_serial_init(SysBusDevice *dev)
+static void imx_serial_realize(DeviceState *dev, Error **errp)
{
IMXSerialState *s = IMX_SERIAL(dev);
-
- memory_region_init_io(&s->iomem, OBJECT(s), &imx_serial_ops, s,
- "imx-serial", 0x1000);
- sysbus_init_mmio(dev, &s->iomem);
- sysbus_init_irq(dev, &s->irq);
-
if (s->chr) {
qemu_chr_add_handlers(s->chr, imx_can_receive, imx_receive,
imx_event, s);
} else {
- DPRINTF("No char dev for uart at 0x%lx\n",
- (unsigned long)s->iomem.ram_addr);
+ DPRINTF("No char dev for uart\n");
}
-
- return 0;
}
-void imx_serial_create(int uart, const hwaddr addr, qemu_irq irq)
+static void imx_serial_init(Object *obj)
{
- DeviceState *dev;
- SysBusDevice *bus;
- CharDriverState *chr;
- const char chr_name[] = "serial";
- char label[ARRAY_SIZE(chr_name) + 1];
-
- dev = qdev_create(NULL, TYPE_IMX_SERIAL);
-
- if (uart >= MAX_SERIAL_PORTS) {
- hw_error("Cannot assign uart %d: QEMU supports only %d ports\n",
- uart, MAX_SERIAL_PORTS);
- }
- chr = serial_hds[uart];
- if (!chr) {
- snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, uart);
- chr = qemu_chr_new(label, "null", NULL);
- if (!(chr)) {
- hw_error("Can't assign serial port to imx-uart%d.\n", uart);
- }
- }
-
- qdev_prop_set_chr(dev, "chardev", chr);
- bus = SYS_BUS_DEVICE(dev);
- qdev_init_nofail(dev);
- if (addr != (hwaddr)-1) {
- sysbus_mmio_map(bus, 0, addr);
- }
- sysbus_connect_irq(bus, 0, irq);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+ IMXSerialState *s = IMX_SERIAL(obj);
+ memory_region_init_io(&s->iomem, obj, &imx_serial_ops, s,
+ TYPE_IMX_SERIAL, 0x1000);
+ sysbus_init_mmio(sbd, &s->iomem);
+ sysbus_init_irq(sbd, &s->irq);
}
-
-static Property imx32_serial_properties[] = {
+static Property imx_serial_properties[] = {
DEFINE_PROP_CHR("chardev", IMXSerialState, chr),
DEFINE_PROP_END_OF_LIST(),
};
static void imx_serial_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
- SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
- k->init = imx_serial_init;
+ dc->realize = imx_serial_realize;
dc->vmsd = &vmstate_imx_serial;
dc->reset = imx_serial_reset_at_boot;
set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
dc->desc = "i.MX series UART";
- dc->props = imx32_serial_properties;
+ dc->props = imx_serial_properties;
}
static const TypeInfo imx_serial_info = {
- .name = TYPE_IMX_SERIAL,
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(IMXSerialState),
- .class_init = imx_serial_class_init,
+ .name = TYPE_IMX_SERIAL,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(IMXSerialState),
+ .instance_init = imx_serial_init,
+ .class_init = imx_serial_class_init,
};
static void imx_serial_register_types(void)
Code Review / kvmfornfv.git / blobdiff