*
*/
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include <libfdt.h>
+#include "qemu-common.h"
+#ifdef CONFIG_LINUX
+#include <linux/vfio.h>
+#endif
#include "hw/arm/sysbus-fdt.h"
#include "qemu/error-report.h"
#include "sysemu/device_tree.h"
#include "sysemu/sysemu.h"
#include "hw/vfio/vfio-platform.h"
#include "hw/vfio/vfio-calxeda-xgmac.h"
+#include "hw/vfio/vfio-amd-xgbe.h"
#include "hw/arm/fdt.h"
/*
int (*add_fdt_node_fn)(SysBusDevice *sbdev, void *opaque);
} NodeCreationPair;
+/* helpers */
+
+typedef struct HostProperty {
+ const char *name;
+ bool optional;
+} HostProperty;
+
+#ifdef CONFIG_LINUX
+
+/**
+ * copy_properties_from_host
+ *
+ * copies properties listed in an array from host device tree to
+ * guest device tree. If a non optional property is not found, the
+ * function asserts. An optional property is ignored if not found
+ * in the host device tree.
+ * @props: array of HostProperty to copy
+ * @nb_props: number of properties in the array
+ * @host_dt: host device tree blob
+ * @guest_dt: guest device tree blob
+ * @node_path: host dt node path where the property is supposed to be
+ found
+ * @nodename: guest node name the properties should be added to
+ */
+static void copy_properties_from_host(HostProperty *props, int nb_props,
+ void *host_fdt, void *guest_fdt,
+ char *node_path, char *nodename)
+{
+ int i, prop_len;
+ const void *r;
+ Error *err = NULL;
+
+ for (i = 0; i < nb_props; i++) {
+ r = qemu_fdt_getprop(host_fdt, node_path,
+ props[i].name,
+ &prop_len,
+ props[i].optional ? &err : &error_fatal);
+ if (r) {
+ qemu_fdt_setprop(guest_fdt, nodename,
+ props[i].name, r, prop_len);
+ } else {
+ if (prop_len != -FDT_ERR_NOTFOUND) {
+ /* optional property not returned although property exists */
+ error_report_err(err);
+ } else {
+ error_free(err);
+ }
+ }
+ }
+}
+
+/* clock properties whose values are copied/pasted from host */
+static HostProperty clock_copied_properties[] = {
+ {"compatible", false},
+ {"#clock-cells", false},
+ {"clock-frequency", true},
+ {"clock-output-names", true},
+};
+
+/**
+ * fdt_build_clock_node
+ *
+ * Build a guest clock node, used as a dependency from a passthrough'ed
+ * device. Most information are retrieved from the host clock node.
+ * Also check the host clock is a fixed one.
+ *
+ * @host_fdt: host device tree blob from which info are retrieved
+ * @guest_fdt: guest device tree blob where the clock node is added
+ * @host_phandle: phandle of the clock in host device tree
+ * @guest_phandle: phandle to assign to the guest node
+ */
+static void fdt_build_clock_node(void *host_fdt, void *guest_fdt,
+ uint32_t host_phandle,
+ uint32_t guest_phandle)
+{
+ char *node_path = NULL;
+ char *nodename;
+ const void *r;
+ int ret, node_offset, prop_len, path_len = 16;
+
+ node_offset = fdt_node_offset_by_phandle(host_fdt, host_phandle);
+ if (node_offset <= 0) {
+ error_setg(&error_fatal,
+ "not able to locate clock handle %d in host device tree",
+ host_phandle);
+ }
+ node_path = g_malloc(path_len);
+ while ((ret = fdt_get_path(host_fdt, node_offset, node_path, path_len))
+ == -FDT_ERR_NOSPACE) {
+ path_len += 16;
+ node_path = g_realloc(node_path, path_len);
+ }
+ if (ret < 0) {
+ error_setg(&error_fatal,
+ "not able to retrieve node path for clock handle %d",
+ host_phandle);
+ }
+
+ r = qemu_fdt_getprop(host_fdt, node_path, "compatible", &prop_len,
+ &error_fatal);
+ if (strcmp(r, "fixed-clock")) {
+ error_setg(&error_fatal,
+ "clock handle %d is not a fixed clock", host_phandle);
+ }
+
+ nodename = strrchr(node_path, '/');
+ qemu_fdt_add_subnode(guest_fdt, nodename);
+
+ copy_properties_from_host(clock_copied_properties,
+ ARRAY_SIZE(clock_copied_properties),
+ host_fdt, guest_fdt,
+ node_path, nodename);
+
+ qemu_fdt_setprop_cell(guest_fdt, nodename, "phandle", guest_phandle);
+
+ g_free(node_path);
+}
+
+/**
+ * sysfs_to_dt_name: convert the name found in sysfs into the node name
+ * for instance e0900000.xgmac is converted into xgmac@e0900000
+ * @sysfs_name: directory name in sysfs
+ *
+ * returns the device tree name upon success or NULL in case the sysfs name
+ * does not match the expected format
+ */
+static char *sysfs_to_dt_name(const char *sysfs_name)
+{
+ gchar **substrings = g_strsplit(sysfs_name, ".", 2);
+ char *dt_name = NULL;
+
+ if (!substrings || !substrings[0] || !substrings[1]) {
+ goto out;
+ }
+ dt_name = g_strdup_printf("%s@%s", substrings[1], substrings[0]);
+out:
+ g_strfreev(substrings);
+ return dt_name;
+}
+
/* Device Specific Code */
/**
PlatformBusDevice *pbus = data->pbus;
void *fdt = data->fdt;
const char *parent_node = data->pbus_node_name;
- int compat_str_len, i, ret = -1;
+ int compat_str_len, i;
char *nodename;
uint32_t *irq_attr, *reg_attr;
uint64_t mmio_base, irq_number;
mmio_base = platform_bus_get_mmio_addr(pbus, sbdev, i);
reg_attr[2 * i] = cpu_to_be32(mmio_base);
reg_attr[2 * i + 1] = cpu_to_be32(
- memory_region_size(&vdev->regions[i]->mem));
- }
- ret = qemu_fdt_setprop(fdt, nodename, "reg", reg_attr,
- vbasedev->num_regions * 2 * sizeof(uint32_t));
- if (ret) {
- error_report("could not set reg property of node %s", nodename);
- goto fail_reg;
+ memory_region_size(vdev->regions[i]->mem));
}
+ qemu_fdt_setprop(fdt, nodename, "reg", reg_attr,
+ vbasedev->num_regions * 2 * sizeof(uint32_t));
irq_attr = g_new(uint32_t, vbasedev->num_irqs * 3);
for (i = 0; i < vbasedev->num_irqs; i++) {
irq_attr[3 * i + 1] = cpu_to_be32(irq_number);
irq_attr[3 * i + 2] = cpu_to_be32(GIC_FDT_IRQ_FLAGS_LEVEL_HI);
}
- ret = qemu_fdt_setprop(fdt, nodename, "interrupts",
+ qemu_fdt_setprop(fdt, nodename, "interrupts",
irq_attr, vbasedev->num_irqs * 3 * sizeof(uint32_t));
- if (ret) {
- error_report("could not set interrupts property of node %s",
- nodename);
+ g_free(irq_attr);
+ g_free(reg_attr);
+ g_free(nodename);
+ return 0;
+}
+
+/* AMD xgbe properties whose values are copied/pasted from host */
+static HostProperty amd_xgbe_copied_properties[] = {
+ {"compatible", false},
+ {"dma-coherent", true},
+ {"amd,per-channel-interrupt", true},
+ {"phy-mode", false},
+ {"mac-address", true},
+ {"amd,speed-set", false},
+ {"amd,serdes-blwc", true},
+ {"amd,serdes-cdr-rate", true},
+ {"amd,serdes-pq-skew", true},
+ {"amd,serdes-tx-amp", true},
+ {"amd,serdes-dfe-tap-config", true},
+ {"amd,serdes-dfe-tap-enable", true},
+ {"clock-names", false},
+};
+
+/**
+ * add_amd_xgbe_fdt_node
+ *
+ * Generates the combined xgbe/phy node following kernel >=4.2
+ * binding documentation:
+ * Documentation/devicetree/bindings/net/amd-xgbe.txt:
+ * Also 2 clock nodes are created (dma and ptp)
+ *
+ * Asserts in case of error
+ */
+static int add_amd_xgbe_fdt_node(SysBusDevice *sbdev, void *opaque)
+{
+ PlatformBusFDTData *data = opaque;
+ PlatformBusDevice *pbus = data->pbus;
+ VFIOPlatformDevice *vdev = VFIO_PLATFORM_DEVICE(sbdev);
+ VFIODevice *vbasedev = &vdev->vbasedev;
+ VFIOINTp *intp;
+ const char *parent_node = data->pbus_node_name;
+ char **node_path, *nodename, *dt_name;
+ void *guest_fdt = data->fdt, *host_fdt;
+ const void *r;
+ int i, prop_len;
+ uint32_t *irq_attr, *reg_attr, *host_clock_phandles;
+ uint64_t mmio_base, irq_number;
+ uint32_t guest_clock_phandles[2];
+
+ host_fdt = load_device_tree_from_sysfs();
+
+ dt_name = sysfs_to_dt_name(vbasedev->name);
+ if (!dt_name) {
+ error_setg(&error_fatal, "%s incorrect sysfs device name %s",
+ __func__, vbasedev->name);
+ }
+ node_path = qemu_fdt_node_path(host_fdt, dt_name, vdev->compat,
+ &error_fatal);
+ if (!node_path || !node_path[0]) {
+ error_setg(&error_fatal, "%s unable to retrieve node path for %s/%s",
+ __func__, dt_name, vdev->compat);
}
+
+ if (node_path[1]) {
+ error_setg(&error_fatal, "%s more than one node matching %s/%s!",
+ __func__, dt_name, vdev->compat);
+ }
+
+ g_free(dt_name);
+
+ if (vbasedev->num_regions != 5) {
+ error_setg(&error_fatal, "%s Does the host dt node combine XGBE/PHY?",
+ __func__);
+ }
+
+ /* generate nodes for DMA_CLK and PTP_CLK */
+ r = qemu_fdt_getprop(host_fdt, node_path[0], "clocks",
+ &prop_len, &error_fatal);
+ if (prop_len != 8) {
+ error_setg(&error_fatal, "%s clocks property should contain 2 handles",
+ __func__);
+ }
+ host_clock_phandles = (uint32_t *)r;
+ guest_clock_phandles[0] = qemu_fdt_alloc_phandle(guest_fdt);
+ guest_clock_phandles[1] = qemu_fdt_alloc_phandle(guest_fdt);
+
+ /**
+ * clock handles fetched from host dt are in be32 layout whereas
+ * rest of the code uses cpu layout. Also guest clock handles are
+ * in cpu layout.
+ */
+ fdt_build_clock_node(host_fdt, guest_fdt,
+ be32_to_cpu(host_clock_phandles[0]),
+ guest_clock_phandles[0]);
+
+ fdt_build_clock_node(host_fdt, guest_fdt,
+ be32_to_cpu(host_clock_phandles[1]),
+ guest_clock_phandles[1]);
+
+ /* combined XGBE/PHY node */
+ mmio_base = platform_bus_get_mmio_addr(pbus, sbdev, 0);
+ nodename = g_strdup_printf("%s/%s@%" PRIx64, parent_node,
+ vbasedev->name, mmio_base);
+ qemu_fdt_add_subnode(guest_fdt, nodename);
+
+ copy_properties_from_host(amd_xgbe_copied_properties,
+ ARRAY_SIZE(amd_xgbe_copied_properties),
+ host_fdt, guest_fdt,
+ node_path[0], nodename);
+
+ qemu_fdt_setprop_cells(guest_fdt, nodename, "clocks",
+ guest_clock_phandles[0],
+ guest_clock_phandles[1]);
+
+ reg_attr = g_new(uint32_t, vbasedev->num_regions * 2);
+ for (i = 0; i < vbasedev->num_regions; i++) {
+ mmio_base = platform_bus_get_mmio_addr(pbus, sbdev, i);
+ reg_attr[2 * i] = cpu_to_be32(mmio_base);
+ reg_attr[2 * i + 1] = cpu_to_be32(
+ memory_region_size(vdev->regions[i]->mem));
+ }
+ qemu_fdt_setprop(guest_fdt, nodename, "reg", reg_attr,
+ vbasedev->num_regions * 2 * sizeof(uint32_t));
+
+ irq_attr = g_new(uint32_t, vbasedev->num_irqs * 3);
+ for (i = 0; i < vbasedev->num_irqs; i++) {
+ irq_number = platform_bus_get_irqn(pbus, sbdev , i)
+ + data->irq_start;
+ irq_attr[3 * i] = cpu_to_be32(GIC_FDT_IRQ_TYPE_SPI);
+ irq_attr[3 * i + 1] = cpu_to_be32(irq_number);
+ /*
+ * General device interrupt and PCS auto-negotiation interrupts are
+ * level-sensitive while the 4 per-channel interrupts are edge
+ * sensitive
+ */
+ QLIST_FOREACH(intp, &vdev->intp_list, next) {
+ if (intp->pin == i) {
+ break;
+ }
+ }
+ if (intp->flags & VFIO_IRQ_INFO_AUTOMASKED) {
+ irq_attr[3 * i + 2] = cpu_to_be32(GIC_FDT_IRQ_FLAGS_LEVEL_HI);
+ } else {
+ irq_attr[3 * i + 2] = cpu_to_be32(GIC_FDT_IRQ_FLAGS_EDGE_LO_HI);
+ }
+ }
+ qemu_fdt_setprop(guest_fdt, nodename, "interrupts",
+ irq_attr, vbasedev->num_irqs * 3 * sizeof(uint32_t));
+
+ g_free(host_fdt);
+ g_strfreev(node_path);
g_free(irq_attr);
-fail_reg:
g_free(reg_attr);
g_free(nodename);
- return ret;
+ return 0;
}
+#endif /* CONFIG_LINUX */
+
/* list of supported dynamic sysbus devices */
static const NodeCreationPair add_fdt_node_functions[] = {
+#ifdef CONFIG_LINUX
{TYPE_VFIO_CALXEDA_XGMAC, add_calxeda_midway_xgmac_fdt_node},
+ {TYPE_VFIO_AMD_XGBE, add_amd_xgbe_fdt_node},
+#endif
{"", NULL}, /* last element */
};
Code Review / kvmfornfv.git / blobdiff