+++ /dev/null
- QEMU Machine Protocol Events
- ============================
-
-ACPI_DEVICE_OST
----------------
-
-Emitted when guest executes ACPI _OST method.
-
- - data: ACPIOSTInfo type as described in qapi-schema.json
-
-{ "event": "ACPI_DEVICE_OST",
- "data": { "device": "d1", "slot": "0", "slot-type": "DIMM", "source": 1, "status": 0 } }
-
-BALLOON_CHANGE
---------------
-
-Emitted when the guest changes the actual BALLOON level. This
-value is equivalent to the 'actual' field return by the
-'query-balloon' command
-
-Data:
-
-- "actual": actual level of the guest memory balloon in bytes (json-number)
-
-Example:
-
-{ "event": "BALLOON_CHANGE",
- "data": { "actual": 944766976 },
- "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
-
-BLOCK_IMAGE_CORRUPTED
----------------------
-
-Emitted when a disk image is being marked corrupt. The image can be
-identified by its device or node name. The 'device' field is always
-present for compatibility reasons, but it can be empty ("") if the
-image does not have a device name associated.
-
-Data:
-
-- "device": Device name (json-string)
-- "node-name": Node name (json-string, optional)
-- "msg": Informative message (e.g., reason for the corruption)
- (json-string)
-- "offset": If the corruption resulted from an image access, this
- is the host's access offset into the image
- (json-int, optional)
-- "size": If the corruption resulted from an image access, this
- is the access size (json-int, optional)
-
-Example:
-
-{ "event": "BLOCK_IMAGE_CORRUPTED",
- "data": { "device": "ide0-hd0", "node-name": "node0",
- "msg": "Prevented active L1 table overwrite", "offset": 196608,
- "size": 65536 },
- "timestamp": { "seconds": 1378126126, "microseconds": 966463 } }
-
-BLOCK_IO_ERROR
---------------
-
-Emitted when a disk I/O error occurs.
-
-Data:
-
-- "device": device name (json-string)
-- "operation": I/O operation (json-string, "read" or "write")
-- "action": action that has been taken, it's one of the following (json-string):
- "ignore": error has been ignored
- "report": error has been reported to the device
- "stop": the VM is going to stop because of the error
-
-Example:
-
-{ "event": "BLOCK_IO_ERROR",
- "data": { "device": "ide0-hd1",
- "operation": "write",
- "action": "stop" },
- "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
-Note: If action is "stop", a STOP event will eventually follow the
-BLOCK_IO_ERROR event.
-
-BLOCK_JOB_CANCELLED
--------------------
-
-Emitted when a block job has been cancelled.
-
-Data:
-
-- "type": Job type (json-string; "stream" for image streaming
- "commit" for block commit)
-- "device": Device name (json-string)
-- "len": Maximum progress value (json-int)
-- "offset": Current progress value (json-int)
- On success this is equal to len.
- On failure this is less than len.
-- "speed": Rate limit, bytes per second (json-int)
-
-Example:
-
-{ "event": "BLOCK_JOB_CANCELLED",
- "data": { "type": "stream", "device": "virtio-disk0",
- "len": 10737418240, "offset": 134217728,
- "speed": 0 },
- "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-
-BLOCK_JOB_COMPLETED
--------------------
-
-Emitted when a block job has completed.
-
-Data:
-
-- "type": Job type (json-string; "stream" for image streaming
- "commit" for block commit)
-- "device": Device name (json-string)
-- "len": Maximum progress value (json-int)
-- "offset": Current progress value (json-int)
- On success this is equal to len.
- On failure this is less than len.
-- "speed": Rate limit, bytes per second (json-int)
-- "error": Error message (json-string, optional)
- Only present on failure. This field contains a human-readable
- error message. There are no semantics other than that streaming
- has failed and clients should not try to interpret the error
- string.
-
-Example:
-
-{ "event": "BLOCK_JOB_COMPLETED",
- "data": { "type": "stream", "device": "virtio-disk0",
- "len": 10737418240, "offset": 10737418240,
- "speed": 0 },
- "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-
-BLOCK_JOB_ERROR
----------------
-
-Emitted when a block job encounters an error.
-
-Data:
-
-- "device": device name (json-string)
-- "operation": I/O operation (json-string, "read" or "write")
-- "action": action that has been taken, it's one of the following (json-string):
- "ignore": error has been ignored, the job may fail later
- "report": error will be reported and the job canceled
- "stop": error caused job to be paused
-
-Example:
-
-{ "event": "BLOCK_JOB_ERROR",
- "data": { "device": "ide0-hd1",
- "operation": "write",
- "action": "stop" },
- "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
-BLOCK_JOB_READY
----------------
-
-Emitted when a block job is ready to complete.
-
-Data:
-
-- "type": Job type (json-string; "stream" for image streaming
- "commit" for block commit)
-- "device": Device name (json-string)
-- "len": Maximum progress value (json-int)
-- "offset": Current progress value (json-int)
- On success this is equal to len.
- On failure this is less than len.
-- "speed": Rate limit, bytes per second (json-int)
-
-Example:
-
-{ "event": "BLOCK_JOB_READY",
- "data": { "device": "drive0", "type": "mirror", "speed": 0,
- "len": 2097152, "offset": 2097152 }
- "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
-Note: The "ready to complete" status is always reset by a BLOCK_JOB_ERROR
-event.
-
-DEVICE_DELETED
---------------
-
-Emitted whenever the device removal completion is acknowledged
-by the guest.
-At this point, it's safe to reuse the specified device ID.
-Device removal can be initiated by the guest or by HMP/QMP commands.
-
-Data:
-
-- "device": device name (json-string, optional)
-- "path": device path (json-string)
-
-{ "event": "DEVICE_DELETED",
- "data": { "device": "virtio-net-pci-0",
- "path": "/machine/peripheral/virtio-net-pci-0" },
- "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
-DEVICE_TRAY_MOVED
------------------
-
-It's emitted whenever the tray of a removable device is moved by the guest
-or by HMP/QMP commands.
-
-Data:
-
-- "device": device name (json-string)
-- "tray-open": true if the tray has been opened or false if it has been closed
- (json-bool)
-
-{ "event": "DEVICE_TRAY_MOVED",
- "data": { "device": "ide1-cd0",
- "tray-open": true
- },
- "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
-GUEST_PANICKED
---------------
-
-Emitted when guest OS panic is detected.
-
-Data:
-
-- "action": Action that has been taken (json-string, currently always "pause").
-
-Example:
-
-{ "event": "GUEST_PANICKED",
- "data": { "action": "pause" } }
-
-MEM_UNPLUG_ERROR
---------------------
-Emitted when memory hot unplug error occurs.
-
-Data:
-
-- "device": device name (json-string)
-- "msg": Informative message (e.g., reason for the error) (json-string)
-
-Example:
-
-{ "event": "MEM_UNPLUG_ERROR"
- "data": { "device": "dimm1",
- "msg": "acpi: device unplug for unsupported device"
- },
- "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
-NIC_RX_FILTER_CHANGED
----------------------
-
-The event is emitted once until the query command is executed,
-the first event will always be emitted.
-
-Data:
-
-- "name": net client name (json-string)
-- "path": device path (json-string)
-
-{ "event": "NIC_RX_FILTER_CHANGED",
- "data": { "name": "vnet0",
- "path": "/machine/peripheral/vnet0/virtio-backend" },
- "timestamp": { "seconds": 1368697518, "microseconds": 326866 } }
-}
-
-POWERDOWN
----------
-
-Emitted when the Virtual Machine is powered down through the power
-control system, such as via ACPI.
-
-Data: None.
-
-Example:
-
-{ "event": "POWERDOWN",
- "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
-
-QUORUM_FAILURE
---------------
-
-Emitted by the Quorum block driver if it fails to establish a quorum.
-
-Data:
-
-- "reference": device name if defined else node name.
-- "sector-num": Number of the first sector of the failed read operation.
-- "sectors-count": Failed read operation sector count.
-
-Example:
-
-{ "event": "QUORUM_FAILURE",
- "data": { "reference": "usr1", "sector-num": 345435, "sectors-count": 5 },
- "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
-
-QUORUM_REPORT_BAD
------------------
-
-Emitted to report a corruption of a Quorum file.
-
-Data:
-
-- "error": Error message (json-string, optional)
- Only present on failure. This field contains a human-readable
- error message. There are no semantics other than that the
- block layer reported an error and clients should not try to
- interpret the error string.
-- "node-name": The graph node name of the block driver state.
-- "sector-num": Number of the first sector of the failed read operation.
-- "sectors-count": Failed read operation sector count.
-
-Example:
-
-{ "event": "QUORUM_REPORT_BAD",
- "data": { "node-name": "1.raw", "sector-num": 345435, "sectors-count": 5 },
- "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
-
-RESET
------
-
-Emitted when the Virtual Machine is reset.
-
-Data: None.
-
-Example:
-
-{ "event": "RESET",
- "timestamp": { "seconds": 1267041653, "microseconds": 9518 } }
-
-RESUME
-------
-
-Emitted when the Virtual Machine resumes execution.
-
-Data: None.
-
-Example:
-
-{ "event": "RESUME",
- "timestamp": { "seconds": 1271770767, "microseconds": 582542 } }
-
-RTC_CHANGE
-----------
-
-Emitted when the guest changes the RTC time.
-
-Data:
-
-- "offset": Offset between base RTC clock (as specified by -rtc base), and
-new RTC clock value (json-number)
-
-Example:
-
-{ "event": "RTC_CHANGE",
- "data": { "offset": 78 },
- "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
-
-SHUTDOWN
---------
-
-Emitted when the Virtual Machine has shut down, indicating that qemu
-is about to exit.
-
-Data: None.
-
-Example:
-
-{ "event": "SHUTDOWN",
- "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
-
-Note: If the command-line option "-no-shutdown" has been specified, a STOP
-event will eventually follow the SHUTDOWN event.
-
-SPICE_CONNECTED
----------------
-
-Emitted when a SPICE client connects.
-
-Data:
-
-- "server": Server information (json-object)
- - "host": IP address (json-string)
- - "port": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
-- "client": Client information (json-object)
- - "host": IP address (json-string)
- - "port": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
-
-Example:
-
-{ "timestamp": {"seconds": 1290688046, "microseconds": 388707},
- "event": "SPICE_CONNECTED",
- "data": {
- "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
- "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
-}}
-
-SPICE_DISCONNECTED
-------------------
-
-Emitted when a SPICE client disconnects.
-
-Data:
-
-- "server": Server information (json-object)
- - "host": IP address (json-string)
- - "port": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
-- "client": Client information (json-object)
- - "host": IP address (json-string)
- - "port": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
-
-Example:
-
-{ "timestamp": {"seconds": 1290688046, "microseconds": 388707},
- "event": "SPICE_DISCONNECTED",
- "data": {
- "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
- "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
-}}
-
-SPICE_INITIALIZED
------------------
-
-Emitted after initial handshake and authentication takes place (if any)
-and the SPICE channel is up and running
-
-Data:
-
-- "server": Server information (json-object)
- - "host": IP address (json-string)
- - "port": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
- - "auth": authentication method (json-string, optional)
-- "client": Client information (json-object)
- - "host": IP address (json-string)
- - "port": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
- - "connection-id": spice connection id. All channels with the same id
- belong to the same spice session (json-int)
- - "channel-type": channel type. "1" is the main control channel, filter for
- this one if you want track spice sessions only (json-int)
- - "channel-id": channel id. Usually "0", might be different needed when
- multiple channels of the same type exist, such as multiple
- display channels in a multihead setup (json-int)
- - "tls": whevener the channel is encrypted (json-bool)
-
-Example:
-
-{ "timestamp": {"seconds": 1290688046, "microseconds": 417172},
- "event": "SPICE_INITIALIZED",
- "data": {"server": {"auth": "spice", "port": "5921",
- "family": "ipv4", "host": "127.0.0.1"},
- "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
- "connection-id": 1804289383, "host": "127.0.0.1",
- "channel-id": 0, "tls": true}
-}}
-
-SPICE_MIGRATE_COMPLETED
------------------------
-
-Emitted when SPICE migration has completed
-
-Data: None.
-
-Example:
-
-{ "timestamp": {"seconds": 1290688046, "microseconds": 417172},
- "event": "SPICE_MIGRATE_COMPLETED" }
-
-MIGRATION
----------
-
-Emitted when a migration event happens
-
-Data: None.
-
- - "status": migration status
- See MigrationStatus in ~/qapi-schema.json for possible values
-
-Example:
-
-{"timestamp": {"seconds": 1432121972, "microseconds": 744001},
- "event": "MIGRATION", "data": {"status": "completed"}}
-
-STOP
-----
-
-Emitted when the Virtual Machine is stopped.
-
-Data: None.
-
-Example:
-
-{ "event": "STOP",
- "timestamp": { "seconds": 1267041730, "microseconds": 281295 } }
-
-SUSPEND
--------
-
-Emitted when guest enters S3 state.
-
-Data: None.
-
-Example:
-
-{ "event": "SUSPEND",
- "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
-
-SUSPEND_DISK
-------------
-
-Emitted when the guest makes a request to enter S4 state.
-
-Data: None.
-
-Example:
-
-{ "event": "SUSPEND_DISK",
- "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
-
-Note: QEMU shuts down when entering S4 state.
-
-VNC_CONNECTED
--------------
-
-Emitted when a VNC client establishes a connection.
-
-Data:
-
-- "server": Server information (json-object)
- - "host": IP address (json-string)
- - "service": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
- - "auth": authentication method (json-string, optional)
-- "client": Client information (json-object)
- - "host": IP address (json-string)
- - "service": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
-
-Example:
-
-{ "event": "VNC_CONNECTED",
- "data": {
- "server": { "auth": "sasl", "family": "ipv4",
- "service": "5901", "host": "0.0.0.0" },
- "client": { "family": "ipv4", "service": "58425",
- "host": "127.0.0.1" } },
- "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
-
-
-Note: This event is emitted before any authentication takes place, thus
-the authentication ID is not provided.
-
-VNC_DISCONNECTED
-----------------
-
-Emitted when the connection is closed.
-
-Data:
-
-- "server": Server information (json-object)
- - "host": IP address (json-string)
- - "service": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
- - "auth": authentication method (json-string, optional)
-- "client": Client information (json-object)
- - "host": IP address (json-string)
- - "service": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
- - "x509_dname": TLS dname (json-string, optional)
- - "sasl_username": SASL username (json-string, optional)
-
-Example:
-
-{ "event": "VNC_DISCONNECTED",
- "data": {
- "server": { "auth": "sasl", "family": "ipv4",
- "service": "5901", "host": "0.0.0.0" },
- "client": { "family": "ipv4", "service": "58425",
- "host": "127.0.0.1", "sasl_username": "luiz" } },
- "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
-
-VNC_INITIALIZED
----------------
-
-Emitted after authentication takes place (if any) and the VNC session is
-made active.
-
-Data:
-
-- "server": Server information (json-object)
- - "host": IP address (json-string)
- - "service": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
- - "auth": authentication method (json-string, optional)
-- "client": Client information (json-object)
- - "host": IP address (json-string)
- - "service": port number (json-string)
- - "family": address family (json-string, "ipv4" or "ipv6")
- - "x509_dname": TLS dname (json-string, optional)
- - "sasl_username": SASL username (json-string, optional)
-
-Example:
-
-{ "event": "VNC_INITIALIZED",
- "data": {
- "server": { "auth": "sasl", "family": "ipv4",
- "service": "5901", "host": "0.0.0.0"},
- "client": { "family": "ipv4", "service": "46089",
- "host": "127.0.0.1", "sasl_username": "luiz" } },
- "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
-
-VSERPORT_CHANGE
----------------
-
-Emitted when the guest opens or closes a virtio-serial port.
-
-Data:
-
-- "id": device identifier of the virtio-serial port (json-string)
-- "open": true if the guest has opened the virtio-serial port (json-bool)
-
-Example:
-
-{ "event": "VSERPORT_CHANGE",
- "data": { "id": "channel0", "open": true },
- "timestamp": { "seconds": 1401385907, "microseconds": 422329 } }
-
-WAKEUP
-------
-
-Emitted when the guest has woken up from S3 and is running.
-
-Data: None.
-
-Example:
-
-{ "event": "WAKEUP",
- "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
-
-WATCHDOG
---------
-
-Emitted when the watchdog device's timer is expired.
-
-Data:
-
-- "action": Action that has been taken, it's one of the following (json-string):
- "reset", "shutdown", "poweroff", "pause", "debug", or "none"
-
-Example:
-
-{ "event": "WATCHDOG",
- "data": { "action": "reset" },
- "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-
-Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is
-followed respectively by the RESET, SHUTDOWN, or STOP events.
Code Review / kvmfornfv.git / blobdiff