* Copyright 2005, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
- * Copyright 2013-2014 Intel Mobile Communications GmbH
+ * Copyright 2013-2015 Intel Mobile Communications GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
-#include <linux/pm_qos.h>
#include <net/sch_generic.h>
#include <linux/slab.h>
#include <linux/export.h>
struct cfg80211_bss *cbss;
struct ieee80211_bss *bss;
int clen, srlen;
- enum nl80211_bss_scan_width scan_width;
- s32 signal = 0;
+ struct cfg80211_inform_bss bss_meta = {};
+ bool signal_valid;
- if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
- signal = rx_status->signal * 100;
- else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
- signal = (rx_status->signal * 100) / local->hw.max_signal;
+ if (ieee80211_hw_check(&local->hw, SIGNAL_DBM))
+ bss_meta.signal = rx_status->signal * 100;
+ else if (ieee80211_hw_check(&local->hw, SIGNAL_UNSPEC))
+ bss_meta.signal = (rx_status->signal * 100) / local->hw.max_signal;
- scan_width = NL80211_BSS_CHAN_WIDTH_20;
+ bss_meta.scan_width = NL80211_BSS_CHAN_WIDTH_20;
if (rx_status->flag & RX_FLAG_5MHZ)
- scan_width = NL80211_BSS_CHAN_WIDTH_5;
+ bss_meta.scan_width = NL80211_BSS_CHAN_WIDTH_5;
if (rx_status->flag & RX_FLAG_10MHZ)
- scan_width = NL80211_BSS_CHAN_WIDTH_10;
+ bss_meta.scan_width = NL80211_BSS_CHAN_WIDTH_10;
- cbss = cfg80211_inform_bss_width_frame(local->hw.wiphy, channel,
- scan_width, mgmt, len, signal,
- GFP_ATOMIC);
+ bss_meta.chan = channel;
+ cbss = cfg80211_inform_bss_frame_data(local->hw.wiphy, &bss_meta,
+ mgmt, len, GFP_ATOMIC);
if (!cbss)
return NULL;
+ /* In case the signal is invalid update the status */
+ signal_valid = abs(channel->center_freq - cbss->channel->center_freq)
+ <= local->hw.wiphy->max_adj_channel_rssi_comp;
+ if (!signal_valid)
+ rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
bss = (void *)cbss->priv;
if (test_bit(SCAN_HW_CANCELLED, &local->scanning))
return false;
- if (local->hw.flags & IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS) {
+ if (ieee80211_hw_check(&local->hw, SINGLE_SCAN_ON_ALL_BANDS)) {
for (i = 0; i < req->n_channels; i++) {
local->hw_scan_req->req.channels[i] = req->channels[i];
bands_used |= BIT(req->channels[i]->band);
bool was_scanning = local->scanning;
struct cfg80211_scan_request *scan_req;
struct ieee80211_sub_if_data *scan_sdata;
+ struct ieee80211_sub_if_data *sdata;
lockdep_assert_held(&local->mtx);
return;
if (hw_scan && !aborted &&
- !(local->hw.flags & IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS) &&
+ !ieee80211_hw_check(&local->hw, SINGLE_SCAN_ON_ALL_BANDS) &&
ieee80211_prep_hw_scan(local)) {
int rc;
ieee80211_mlme_notify_scan_completed(local);
ieee80211_ibss_notify_scan_completed(local);
- ieee80211_mesh_notify_scan_completed(local);
+
+ /* Requeue all the work that might have been ignored while
+ * the scan was in progress; if there was none this will
+ * just be a no-op for the particular interface.
+ */
+ list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+ if (ieee80211_sdata_running(sdata))
+ ieee80211_queue_work(&sdata->local->hw, &sdata->work);
+ }
+
if (was_scanning)
ieee80211_start_next_roc(local);
}
local->hw_scan_ies_bufsize = local->scan_ies_len + req->ie_len;
- if (local->hw.flags & IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS) {
+ if (ieee80211_hw_check(&local->hw, SINGLE_SCAN_ON_ALL_BANDS)) {
int i, n_bands = 0;
u8 bands_counted = 0;
/* We need to ensure power level is at max for scanning. */
ieee80211_hw_config(local, 0);
- if ((req->channels[0]->flags &
- IEEE80211_CHAN_NO_IR) ||
+ if ((req->channels[0]->flags & (IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_RADAR)) ||
!req->n_ssids) {
next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
} else {
* TODO: channel switching also consumes quite some time,
* add that delay as well to get a better estimation
*/
- if (chan->flags & IEEE80211_CHAN_NO_IR)
+ if (chan->flags & (IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_RADAR))
return IEEE80211_PASSIVE_CHANNEL_TIME;
return IEEE80211_PROBE_DELAY + IEEE80211_CHANNEL_TIME;
}
*
* In any case, it is not necessary for a passive scan.
*/
- if (chan->flags & IEEE80211_CHAN_NO_IR || !scan_req->n_ssids) {
+ if ((chan->flags & (IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_RADAR)) ||
+ !scan_req->n_ssids) {
*next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
local->next_scan_state = SCAN_DECISION;
return;
return ret;
}
-int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata)
+int ieee80211_request_sched_scan_stop(struct ieee80211_local *local)
{
- struct ieee80211_local *local = sdata->local;
- int ret = 0;
+ struct ieee80211_sub_if_data *sched_scan_sdata;
+ int ret = -ENOENT;
mutex_lock(&local->mtx);
/* We don't want to restart sched scan anymore. */
RCU_INIT_POINTER(local->sched_scan_req, NULL);
- if (rcu_access_pointer(local->sched_scan_sdata)) {
- ret = drv_sched_scan_stop(local, sdata);
+ sched_scan_sdata = rcu_dereference_protected(local->sched_scan_sdata,
+ lockdep_is_held(&local->mtx));
+ if (sched_scan_sdata) {
+ ret = drv_sched_scan_stop(local, sched_scan_sdata);
if (!ret)
RCU_INIT_POINTER(local->sched_scan_sdata, NULL);
}
Code Review / kvmfornfv.git / blobdiff